Re: iOS Provisioning Profile issue

2020-05-22 Thread panagiotis merakos via use-livecode 
No problem Graham ;)

Deploying for iOS can be frustrating in the beginning, but once you get
familiar with the requirements, things are not that bad ;)

Cheers,
Panos

On Fri, May 22, 2020, 23:15 Graham Samuel via use-livecode <
use-livecode@lists.runrev.com> wrote:

> Thanks Panos - I am truly sorry to have wasted your precious time. The
> fact is, I am trying to do all this iOS development while keeping to the
> absolute minimum of knowledge about Apple’s arcane, not to say Byzantine,
> systems of deployment, approval etc. Thus the terminology about profiles
> and the reason they come in different flavours has never really sunk in.
> Indeed I was hoping against hope to avoid it as much as possible. For me,
> life really is too short.
>
> You have yet again got me out of the soup.
>
> Cheers
>
> Graham
>
> > On 22 May 2020, at 21:31, panagiotis merakos via use-livecode <
> use-livecode@lists.runrev.com> wrote:
> >
> > Oh, I see. If the provisioning profile is of type "AppStore", then it is
> a
> > Distribution profile, so you will not be able to use this profile for
> > installing the app directly to your device.
> >
> > You need an iOS Development profile for being able to install the app on
> > the device.
> >
> > Regards,
> > Panos
> >
> > On Fri, May 22, 2020, 19:53 JeeJeeStudio via use-livecode <
> > use-livecode@lists.runrev.com> wrote:
> >
> >> AS far as i know this profile lasts for 6 days for development.
> >>
> >> Then you have to renew it in Xcode.
> >>
> >> Op 22-5-2020 om 12:47 schreef Graham Samuel via use-livecode:
> >>> Panos - thanks for asking
> >>>
> >>> Yes it is - an iPhone XS which has been my key test device for weeks.
> >> Should I try it on the very latest version of LC? I had a download
> glitch
> >> last night so didn’t install it (the joys of rural broadband).
> >>>
> >>> Graham
> >>>
> >>>
> >>> Sent from my iPhone
> >>>
>  On 22 May 2020, at 11:00, panagiotis merakos via use-livecode <
> >> use-livecode@lists.runrev.com> wrote:
> 
>  Hello Graham,
> 
>  Is that the same iOS device you used when you could successfully
>  install the app?
> 
>  Kind regards,
>  Panos
>  --
> 
> > On Fri, 22 May 2020 at 11:52, Graham Samuel via use-livecode <
> > use-livecode@lists.runrev.com> wrote:
> >
> > I’ve been using XCode to load an app into my iPhone for some time
> now,
> >> but
> > today using LC 9.6.0 rc1, I got this refusal:
> >
> >> A valid provisioning profile for this executable was not found.
> > As far as I’m concerned, I’ve got the same provisioning profile as I
> >> had a
> > few days ago, and it’s  been in the Standalone Settings for the app
> for
> > some time, when this version of LC did several successful updates.
> >
> > Can anyone suggest what I’ve done wrong?
> >
> > Graham
> > ___
> > use-livecode mailing list
> > use-livecode@lists.runrev.com
> > Please visit this url to subscribe, unsubscribe and manage your
> > subscription preferences:
> > http://lists.runrev.com/mailman/listinfo/use-livecode
> >
>  ___
>  use-livecode mailing list
>  use-livecode@lists.runrev.com
>  Please visit this url to subscribe, unsubscribe and manage your
> >> subscription preferences:
>  http://lists.runrev.com/mailman/listinfo/use-livecode
> >>> ___
> >>> use-livecode mailing list
> >>> use-livecode@lists.runrev.com
> >>> Please visit this url to subscribe, unsubscribe and manage your
> >> subscription preferences:
> >>> http://lists.runrev.com/mailman/listinfo/use-livecode
> >>
> >> ___
> >> use-livecode mailing list
> >> use-livecode@lists.runrev.com
> >> Please visit this url to subscribe, unsubscribe and manage your
> >> subscription preferences:
> >> http://lists.runrev.com/mailman/listinfo/use-livecode
> >>
> > ___
> > use-livecode mailing list
> > use-livecode@lists.runrev.com
> > Please visit this url to subscribe, unsubscribe and manage your
> subscription preferences:
> > http://lists.runrev.com/mailman/listinfo/use-livecode
>
>
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your
> subscription preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode
>
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: iOS Provisioning Profile issue

2020-05-22 Thread Graham Samuel via use-livecode 
Thanks Panos - I am truly sorry to have wasted your precious time. The fact is, 
I am trying to do all this iOS development while keeping to the absolute 
minimum of knowledge about Apple’s arcane, not to say Byzantine, systems of 
deployment, approval etc. Thus the terminology about profiles and the reason 
they come in different flavours has never really sunk in. Indeed I was hoping 
against hope to avoid it as much as possible. For me, life really is too short.

You have yet again got me out of the soup.

Cheers

Graham

> On 22 May 2020, at 21:31, panagiotis merakos via use-livecode 
>  wrote:
> 
> Oh, I see. If the provisioning profile is of type "AppStore", then it is a
> Distribution profile, so you will not be able to use this profile for
> installing the app directly to your device.
> 
> You need an iOS Development profile for being able to install the app on
> the device.
> 
> Regards,
> Panos
> 
> On Fri, May 22, 2020, 19:53 JeeJeeStudio via use-livecode <
> use-livecode@lists.runrev.com> wrote:
> 
>> AS far as i know this profile lasts for 6 days for development.
>> 
>> Then you have to renew it in Xcode.
>> 
>> Op 22-5-2020 om 12:47 schreef Graham Samuel via use-livecode:
>>> Panos - thanks for asking
>>> 
>>> Yes it is - an iPhone XS which has been my key test device for weeks.
>> Should I try it on the very latest version of LC? I had a download glitch
>> last night so didn’t install it (the joys of rural broadband).
>>> 
>>> Graham
>>> 
>>> 
>>> Sent from my iPhone
>>> 
 On 22 May 2020, at 11:00, panagiotis merakos via use-livecode <
>> use-livecode@lists.runrev.com> wrote:
 
 Hello Graham,
 
 Is that the same iOS device you used when you could successfully
 install the app?
 
 Kind regards,
 Panos
 --
 
> On Fri, 22 May 2020 at 11:52, Graham Samuel via use-livecode <
> use-livecode@lists.runrev.com> wrote:
> 
> I’ve been using XCode to load an app into my iPhone for some time now,
>> but
> today using LC 9.6.0 rc1, I got this refusal:
> 
>> A valid provisioning profile for this executable was not found.
> As far as I’m concerned, I’ve got the same provisioning profile as I
>> had a
> few days ago, and it’s  been in the Standalone Settings for the app for
> some time, when this version of LC did several successful updates.
> 
> Can anyone suggest what I’ve done wrong?
> 
> Graham
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your
> subscription preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode
> 
 ___
 use-livecode mailing list
 use-livecode@lists.runrev.com
 Please visit this url to subscribe, unsubscribe and manage your
>> subscription preferences:
 http://lists.runrev.com/mailman/listinfo/use-livecode
>>> ___
>>> use-livecode mailing list
>>> use-livecode@lists.runrev.com
>>> Please visit this url to subscribe, unsubscribe and manage your
>> subscription preferences:
>>> http://lists.runrev.com/mailman/listinfo/use-livecode
>> 
>> ___
>> use-livecode mailing list
>> use-livecode@lists.runrev.com
>> Please visit this url to subscribe, unsubscribe and manage your
>> subscription preferences:
>> http://lists.runrev.com/mailman/listinfo/use-livecode
>> 
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription 
> preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: iOS Provisioning Profile issue

2020-05-22 Thread panagiotis merakos via use-livecode 
Oh, I see. If the provisioning profile is of type "AppStore", then it is a
Distribution profile, so you will not be able to use this profile for
installing the app directly to your device.

You need an iOS Development profile for being able to install the app on
the device.

Regards,
Panos

On Fri, May 22, 2020, 19:53 JeeJeeStudio via use-livecode <
use-livecode@lists.runrev.com> wrote:

> AS far as i know this profile lasts for 6 days for development.
>
> Then you have to renew it in Xcode.
>
> Op 22-5-2020 om 12:47 schreef Graham Samuel via use-livecode:
> > Panos - thanks for asking
> >
> > Yes it is - an iPhone XS which has been my key test device for weeks.
> Should I try it on the very latest version of LC? I had a download glitch
> last night so didn’t install it (the joys of rural broadband).
> >
> > Graham
> >
> >
> > Sent from my iPhone
> >
> >> On 22 May 2020, at 11:00, panagiotis merakos via use-livecode <
> use-livecode@lists.runrev.com> wrote:
> >>
> >> Hello Graham,
> >>
> >> Is that the same iOS device you used when you could successfully
> >> install the app?
> >>
> >> Kind regards,
> >> Panos
> >> --
> >>
> >>> On Fri, 22 May 2020 at 11:52, Graham Samuel via use-livecode <
> >>> use-livecode@lists.runrev.com> wrote:
> >>>
> >>> I’ve been using XCode to load an app into my iPhone for some time now,
> but
> >>> today using LC 9.6.0 rc1, I got this refusal:
> >>>
>  A valid provisioning profile for this executable was not found.
> >>> As far as I’m concerned, I’ve got the same provisioning profile as I
> had a
> >>> few days ago, and it’s  been in the Standalone Settings for the app for
> >>> some time, when this version of LC did several successful updates.
> >>>
> >>> Can anyone suggest what I’ve done wrong?
> >>>
> >>> Graham
> >>> ___
> >>> use-livecode mailing list
> >>> use-livecode@lists.runrev.com
> >>> Please visit this url to subscribe, unsubscribe and manage your
> >>> subscription preferences:
> >>> http://lists.runrev.com/mailman/listinfo/use-livecode
> >>>
> >> ___
> >> use-livecode mailing list
> >> use-livecode@lists.runrev.com
> >> Please visit this url to subscribe, unsubscribe and manage your
> subscription preferences:
> >> http://lists.runrev.com/mailman/listinfo/use-livecode
> > ___
> > use-livecode mailing list
> > use-livecode@lists.runrev.com
> > Please visit this url to subscribe, unsubscribe and manage your
> subscription preferences:
> > http://lists.runrev.com/mailman/listinfo/use-livecode
>
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your
> subscription preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode
>
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: iOS Provisioning Profile issue

2020-05-22 Thread JeeJeeStudio via use-livecode 

AS far as i know this profile lasts for 6 days for development.

Then you have to renew it in Xcode.

Op 22-5-2020 om 12:47 schreef Graham Samuel via use-livecode:

Panos - thanks for asking

Yes it is - an iPhone XS which has been my key test device for weeks. Should I 
try it on the very latest version of LC? I had a download glitch last night so 
didn’t install it (the joys of rural broadband).

Graham


Sent from my iPhone


On 22 May 2020, at 11:00, panagiotis merakos via use-livecode 
 wrote:

Hello Graham,

Is that the same iOS device you used when you could successfully
install the app?

Kind regards,
Panos
--


On Fri, 22 May 2020 at 11:52, Graham Samuel via use-livecode <
use-livecode@lists.runrev.com> wrote:

I’ve been using XCode to load an app into my iPhone for some time now, but
today using LC 9.6.0 rc1, I got this refusal:


A valid provisioning profile for this executable was not found.

As far as I’m concerned, I’ve got the same provisioning profile as I had a
few days ago, and it’s  been in the Standalone Settings for the app for
some time, when this version of LC did several successful updates.

Can anyone suggest what I’ve done wrong?

Graham
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your
subscription preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: iOS Provisioning Profile issue

2020-05-22 Thread Jimmieson, Phil via use-livecode 
Hi Graham,
What I usually do when I have provisioning profile problems is:

locate the folder that contains my downloaded profiles -  it’s in your personal 
library folder in your home folder (which by default is hidden).

In my case I open a window to:

/Users/phil/Library/MobileDevice/Provisioning Profiles/

Trash all of the profiles in there.

Start Xcode, and once it’s running go to preferences and select the accounts 
tab. From the area on the right of the window, select download manual profiles 
- this will re-download the profiles from Apple (and repopulate the folder that 
you just emptied).

Go back to LiveCode, and from the standalone application settings window, iOS 
tab, select the required profile from the profile popup menu.

All of that usually solves the problem. I did once have an issue where even 
that didn’t work, and in that case I logged in to Apple's developer site, 
trashed the provisioning profile and re-created it. I then went through the 
sequence outlined above and this time it was successful.

On 22 May 2020, at 16:16, Graham Samuel via use-livecode 
mailto:use-livecode@lists.runrev.com>> wrote:

Panos, it is very strange: I looked up my provisioning profile in the 
developer.app.com site (I’ve only got the one 
provisioning profile, for iOS, type “App Store"), noted that the expiry date is 
8 May 2021, re-downloade it, double-clicked it to bring it to the attention of 
XCode, and tried the upload of the app to the phone again. Exactly the same 
result.

My next move is to revisit the Standalone Settings for the app - I am not quite 
sure  how LC knows which profiles I have or where they are, but I assume it’s 
looking in Keychain Access as I have had to supply a password for that, and 
where one can read that the certificate exists and is valid.

Graham


On 22 May 2020, at 13:48, panagiotis merakos via use-livecode 
mailto:use-livecode@lists.runrev.com>> wrote:

Hello Graham,

Hmm ok, that's strange. Could you make sure the provisioning profile has
not expired, and it is still valid, as Matthias suggested?

There is no need to download 9.6 RC-2 for that, we have not changed
anything that could cause this issue.

Kind regards,
Panos
--

On Fri, 22 May 2020 at 13:49, Graham Samuel via use-livecode <
use-livecode@lists.runrev.com> wrote:

Panos - thanks for asking

Yes it is - an iPhone XS which has been my key test device for weeks.
Should I try it on the very latest version of LC? I had a download glitch
last night so didn’t install it (the joys of rural broadband).

Graham


Sent from my iPhone

On 22 May 2020, at 11:00, panagiotis merakos via use-livecode <
use-livecode@lists.runrev.com> wrote:

Hello Graham,

Is that the same iOS device you used when you could successfully
install the app?

Kind regards,
Panos
--

On Fri, 22 May 2020 at 11:52, Graham Samuel via use-livecode <
use-livecode@lists.runrev.com> wrote:

I’ve been using XCode to load an app into my iPhone for some time now,
but
today using LC 9.6.0 rc1, I got this refusal:

A valid provisioning profile for this executable was not found.

As far as I’m concerned, I’ve got the same provisioning profile as I
had a
few days ago, and it’s  been in the Standalone Settings for the app for
some time, when this version of LC did several successful updates.

Can anyone suggest what I’ve done wrong?

--
Phil Jimmieson
University of Liverpool, Computer Science Department
Ashton Bldg, Ashton Street, Liverpool. L69 3BX
0151 795 4236
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: iOS Provisioning Profile issue

2020-05-22 Thread Graham Samuel via use-livecode 
Panos, it is very strange: I looked up my provisioning profile in the 
developer.app.com site (I’ve only got the one provisioning profile, for iOS, 
type “App Store"), noted that the expiry date is 8 May 2021, re-downloade it, 
double-clicked it to bring it to the attention of XCode, and tried the upload 
of the app to the phone again. Exactly the same result. 

My next move is to revisit the Standalone Settings for the app - I am not quite 
sure  how LC knows which profiles I have or where they are, but I assume it’s 
looking in Keychain Access as I have had to supply a password for that, and 
where one can read that the certificate exists and is valid.

Graham


> On 22 May 2020, at 13:48, panagiotis merakos via use-livecode 
>  wrote:
> 
> Hello Graham,
> 
> Hmm ok, that's strange. Could you make sure the provisioning profile has
> not expired, and it is still valid, as Matthias suggested?
> 
> There is no need to download 9.6 RC-2 for that, we have not changed
> anything that could cause this issue.
> 
> Kind regards,
> Panos
> --
> 
> On Fri, 22 May 2020 at 13:49, Graham Samuel via use-livecode <
> use-livecode@lists.runrev.com> wrote:
> 
>> Panos - thanks for asking
>> 
>> Yes it is - an iPhone XS which has been my key test device for weeks.
>> Should I try it on the very latest version of LC? I had a download glitch
>> last night so didn’t install it (the joys of rural broadband).
>> 
>> Graham
>> 
>> 
>> Sent from my iPhone
>> 
>>> On 22 May 2020, at 11:00, panagiotis merakos via use-livecode <
>> use-livecode@lists.runrev.com> wrote:
>>> 
>>> Hello Graham,
>>> 
>>> Is that the same iOS device you used when you could successfully
>>> install the app?
>>> 
>>> Kind regards,
>>> Panos
>>> --
>>> 
 On Fri, 22 May 2020 at 11:52, Graham Samuel via use-livecode <
 use-livecode@lists.runrev.com> wrote:
 
 I’ve been using XCode to load an app into my iPhone for some time now,
>> but
 today using LC 9.6.0 rc1, I got this refusal:
 
> A valid provisioning profile for this executable was not found.
 
 As far as I’m concerned, I’ve got the same provisioning profile as I
>> had a
 few days ago, and it’s  been in the Standalone Settings for the app for
 some time, when this version of LC did several successful updates.
 
 Can anyone suggest what I’ve done wrong?
 
 Graham
 ___
 use-livecode mailing list
 use-livecode@lists.runrev.com
 Please visit this url to subscribe, unsubscribe and manage your
 subscription preferences:
 http://lists.runrev.com/mailman/listinfo/use-livecode
 
>>> ___
>>> use-livecode mailing list
>>> use-livecode@lists.runrev.com
>>> Please visit this url to subscribe, unsubscribe and manage your
>> subscription preferences:
>>> http://lists.runrev.com/mailman/listinfo/use-livecode
>> 
>> ___
>> use-livecode mailing list
>> use-livecode@lists.runrev.com
>> Please visit this url to subscribe, unsubscribe and manage your
>> subscription preferences:
>> http://lists.runrev.com/mailman/listinfo/use-livecode
>> 
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription 
> preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: iOS Provisioning Profile issue

2020-05-22 Thread panagiotis merakos via use-livecode 
Hello Graham,

Hmm ok, that's strange. Could you make sure the provisioning profile has
not expired, and it is still valid, as Matthias suggested?

There is no need to download 9.6 RC-2 for that, we have not changed
anything that could cause this issue.

Kind regards,
Panos
--

On Fri, 22 May 2020 at 13:49, Graham Samuel via use-livecode <
use-livecode@lists.runrev.com> wrote:

> Panos - thanks for asking
>
> Yes it is - an iPhone XS which has been my key test device for weeks.
> Should I try it on the very latest version of LC? I had a download glitch
> last night so didn’t install it (the joys of rural broadband).
>
> Graham
>
>
> Sent from my iPhone
>
> > On 22 May 2020, at 11:00, panagiotis merakos via use-livecode <
> use-livecode@lists.runrev.com> wrote:
> >
> > Hello Graham,
> >
> > Is that the same iOS device you used when you could successfully
> > install the app?
> >
> > Kind regards,
> > Panos
> > --
> >
> >> On Fri, 22 May 2020 at 11:52, Graham Samuel via use-livecode <
> >> use-livecode@lists.runrev.com> wrote:
> >>
> >> I’ve been using XCode to load an app into my iPhone for some time now,
> but
> >> today using LC 9.6.0 rc1, I got this refusal:
> >>
> >>> A valid provisioning profile for this executable was not found.
> >>
> >> As far as I’m concerned, I’ve got the same provisioning profile as I
> had a
> >> few days ago, and it’s  been in the Standalone Settings for the app for
> >> some time, when this version of LC did several successful updates.
> >>
> >> Can anyone suggest what I’ve done wrong?
> >>
> >> Graham
> >> ___
> >> use-livecode mailing list
> >> use-livecode@lists.runrev.com
> >> Please visit this url to subscribe, unsubscribe and manage your
> >> subscription preferences:
> >> http://lists.runrev.com/mailman/listinfo/use-livecode
> >>
> > ___
> > use-livecode mailing list
> > use-livecode@lists.runrev.com
> > Please visit this url to subscribe, unsubscribe and manage your
> subscription preferences:
> > http://lists.runrev.com/mailman/listinfo/use-livecode
>
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your
> subscription preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode
>
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: iOS Provisioning Profile issue

2020-05-22 Thread Graham Samuel via use-livecode 
Panos - thanks for asking

Yes it is - an iPhone XS which has been my key test device for weeks. Should I 
try it on the very latest version of LC? I had a download glitch last night so 
didn’t install it (the joys of rural broadband). 

Graham 


Sent from my iPhone

> On 22 May 2020, at 11:00, panagiotis merakos via use-livecode 
>  wrote:
> 
> Hello Graham,
> 
> Is that the same iOS device you used when you could successfully
> install the app?
> 
> Kind regards,
> Panos
> --
> 
>> On Fri, 22 May 2020 at 11:52, Graham Samuel via use-livecode <
>> use-livecode@lists.runrev.com> wrote:
>> 
>> I’ve been using XCode to load an app into my iPhone for some time now, but
>> today using LC 9.6.0 rc1, I got this refusal:
>> 
>>> A valid provisioning profile for this executable was not found.
>> 
>> As far as I’m concerned, I’ve got the same provisioning profile as I had a
>> few days ago, and it’s  been in the Standalone Settings for the app for
>> some time, when this version of LC did several successful updates.
>> 
>> Can anyone suggest what I’ve done wrong?
>> 
>> Graham
>> ___
>> use-livecode mailing list
>> use-livecode@lists.runrev.com
>> Please visit this url to subscribe, unsubscribe and manage your
>> subscription preferences:
>> http://lists.runrev.com/mailman/listinfo/use-livecode
>> 
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription 
> preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode

___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: iOS Provisioning Profile issue

2020-05-22 Thread panagiotis merakos via use-livecode 
Hello Graham,

Is that the same iOS device you used when you could successfully
install the app?

Kind regards,
Panos
--

On Fri, 22 May 2020 at 11:52, Graham Samuel via use-livecode <
use-livecode@lists.runrev.com> wrote:

> I’ve been using XCode to load an app into my iPhone for some time now, but
> today using LC 9.6.0 rc1, I got this refusal:
>
> > A valid provisioning profile for this executable was not found.
>
> As far as I’m concerned, I’ve got the same provisioning profile as I had a
> few days ago, and it’s  been in the Standalone Settings for the app for
> some time, when this version of LC did several successful updates.
>
> Can anyone suggest what I’ve done wrong?
>
> Graham
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your
> subscription preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode
>
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

Re: iOS Provisioning Profile issue

2020-05-22 Thread matthias rebbe via use-livecode 
Graham,

did you check in your Apple developer account  if the provisioning profile is 
still valid? Maybe it has expired. That would explain why it is not working 
anymore.


-
Matthias Rebbe
Life Is Too Short For Boring Code

> Am 22.05.2020 um 10:51 schrieb Graham Samuel via use-livecode 
> :
> 
> I’ve been using XCode to load an app into my iPhone for some time now, but 
> today using LC 9.6.0 rc1, I got this refusal:
> 
>> A valid provisioning profile for this executable was not found.
> 
> As far as I’m concerned, I’ve got the same provisioning profile as I had a 
> few days ago, and it’s  been in the Standalone Settings for the app for some 
> time, when this version of LC did several successful updates.
> 
> Can anyone suggest what I’ve done wrong?
> 
> Graham
> ___
> use-livecode mailing list
> use-livecode@lists.runrev.com
> Please visit this url to subscribe, unsubscribe and manage your subscription 
> preferences:
> http://lists.runrev.com/mailman/listinfo/use-livecode


___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode

iOS Provisioning Profile issue

2020-05-22 Thread Graham Samuel via use-livecode 
I’ve been using XCode to load an app into my iPhone for some time now, but 
today using LC 9.6.0 rc1, I got this refusal:

> A valid provisioning profile for this executable was not found.

As far as I’m concerned, I’ve got the same provisioning profile as I had a few 
days ago, and it’s  been in the Standalone Settings for the app for some time, 
when this version of LC did several successful updates.

Can anyone suggest what I’ve done wrong?

Graham
___
use-livecode mailing list
use-livecode@lists.runrev.com
Please visit this url to subscribe, unsubscribe and manage your subscription 
preferences:
http://lists.runrev.com/mailman/listinfo/use-livecode