Re: SE: restore default handlers?

2018-02-06 Thread panagiotis merakos via use-livecode
Do you see the non-default handlers of the script? If you see no handlers at all, then either there is a syntax error in the script and LC for some reason does not see it, or something else happens and trashing your Prefs will probably fix it :) PS: I guess you have already tried unchecking and

Exe and dll errors after standalone build

2018-02-06 Thread tbodine via use-livecode
Hi all. I'm getting two error dialogs on launching a newly built standalone (built with LC 7.1.4 on Win 10) of a stable project. Error on: Appname.exe 1 (6) Error on: revsecurity.dll 1 (6) I've been producing builds with this same project for many years without seeing these errors. The errors

Re: SE: restore default handlers?

2018-02-06 Thread Richard Gaskin via use-livecode
panagiotis merakos wrote: > On Tue, Feb 6, 2018 at 5:21 PM, Richard Gaskin wrote: > >> I have "Show Default Handlers" checked in my SE, but I don't see >> them. ... > Do you see the non-default handlers of the script? Yes. > If you see no handlers at all, then either there is a syntax error in

Re: SE: restore default handlers?

2018-02-06 Thread panagiotis merakos via use-livecode
I cannot reproduce this, tested on Ubuntu 16.04 with LC 9 DP-11. Could it be the case that there is a bad interaction with a Plugin? What happens if you try first to "put true into grevdevelopment" and then uncheck and recheck "Show Default handlers"? If something was failing silently before,

Re: How to calm down the Standalone Builder?

2018-02-06 Thread Richard Gaskin via use-livecode
J. Landman Gay wrote: > I'm not sure the problem is profiles. Do you have "search for > inclusions" selected? If so, the sb has to open every stack to search. > Even if you don't use any inclusions, it may be doing that anyway, and > also the ask and answer dialogs are always selected by default.

Re: SE: restore default handlers?

2018-02-06 Thread Richard Gaskin via use-livecode
panagiotis merakos wrote: > I cannot reproduce this, tested on Ubuntu 16.04 with LC 9 DP-11. > > Could it be the case that there is a bad interaction with a Plugin? > > What happens if you try first to "put true into grevdevelopment" and > then uncheck and recheck "Show Default handlers"? > > If

Re: How to calm down the Standalone Builder?

2018-02-06 Thread Richard Gaskin via use-livecode
Bob Sneidar wrote: > That is exactly what I was complaining about. Apparently when the SB > creates the duplicate stack, it uses that path and modifies the > original mainstack if you try to build again. Now I only build for one > platform, and then I quit and relaunch for each build operation.

Re: How to calm down the Standalone Builder?

2018-02-06 Thread Bob Sneidar via use-livecode
I use manual inclusions and it still seems to open everything. If I attempt to build a second time I am informed that there are stacks in memory with the same name. Bob S > On Feb 6, 2018, at 10:12 , J. Landman Gay via use-livecode > wrote: > > I'm not sure

Re: How to calm down the Standalone Builder?

2018-02-06 Thread J. Landman Gay via use-livecode
I'm not sure the problem is profiles. Do you have "search for inclusions" selected? If so, the sb has to open every stack to search. Even if you don't use any inclusions, it may be doing that anyway, and also the ask and answer dialogs are always selected by default. If you haven't already

Re: How to calm down the Standalone Builder?

2018-02-06 Thread Bob Sneidar via use-livecode
That is exactly what I was complaining about. Apparently when the SB creates the duplicate stack, it uses that path and modifies the original mainstack if you try to build again. Now I only build for one platform, and then I quit and relaunch for each build operation. That keeps my original

Re: Exe and dll errors after standalone build

2018-02-06 Thread tbodine via use-livecode
Roseanne Roseannadanna wrote > Nevermind! Fixed it. -- Tom B. -- Sent from: http://runtime-revolution.278305.n4.nabble.com/Revolution-User-f278306.html ___ use-livecode mailing list use-livecode@lists.runrev.com Please visit this url to subscribe,

SE: restore default handlers?

2018-02-06 Thread Richard Gaskin via use-livecode
I have "Show Default Handlers" checked in my SE, but I don't see them. Is this yet another case where I have to toss my prefs stack and then go back and restore all my settings to get this one thing to work, or is there a simpler way to show default handlers in the SE? -- Richard Gaskin

Re: How to calm down the Standalone Builder?

2018-02-06 Thread Bob Sneidar via use-livecode
Yes I think that was resolved a while ago. That particular thing is not happening to me anymore, but I am constantly plagued with the Stack Already Open message, and also the issue with the modal Login stack is related. I have found that I can suppress messages just before building and the

Re: this session has lapsed?

2018-02-06 Thread Heather Laine via use-livecode
Stephen, I'm confused. Maybe you are too? If you have a subscription to LiveCode, it remains current for the term of the subscription. If the subscription is cancelled your access to the purchased, commercial, Indy/Business LiveCode product will cease. This has been the case since version 6.0

Re: Delete imported audioclips?

2018-02-06 Thread Tore Nilsen via use-livecode
Right click or control click the file i project browser and use clear from the menu. You may have to reload the PB to see that the clip is deleted. Best regards Tore Nilsen Sendt fra min iPhone > 6. feb. 2018 kl. 23:08 skrev Klaus major-k via use-livecode > : >

Re: SE: restore default handlers?

2018-02-06 Thread panagiotis merakos via use-livecode
Thanks Richard. So, a guess is that for some reason LC cannot open the sqlite database that holds all the dictionary entries, thus it cannot fetch the list of the default handlers per object. I am wondering if this is related to the other bug report you have filed, where the dictionary opens but

Delete imported audioclips?

2018-02-06 Thread Klaus major-k via use-livecode
Hi friends, obviously I am missing something obvious, but how can I delete an imported audioclip? Looks like the "Poject Brwoser" cannot do this. Thanks for any pointer! Best Klaus -- Klaus Major http://www.major-k.de kl...@major-k.de ___

Re: SE: restore default handlers?

2018-02-06 Thread Geoff Canyon via use-livecode
Does this do what I think it does!? i.e. make it so rev code can throw errors, be debugged, breakpointed, and stepped through. If so, oh my goodness you just made my day. I have been debugging Navigator for fourteen years now, all with answer statements and puts. My code is literally riddled

Re: Delete imported audioclips?

2018-02-06 Thread Klaus major-k via use-livecode
Hi Tore, > Am 07.02.2018 um 00:03 schrieb Tore Nilsen via use-livecode > : > > Right click or control click the file i project browser and use clear from > the menu. > You may have to reload the PB to see that the clip is deleted. Sorry, no "Clear" menu-item in

Navigator

2018-02-06 Thread hh via use-livecode
> Mark T. wrote: > Geoff Canyon is amazing. > Thanks for all of your hard work on this very useful plugin. Yes, thanks a lot Geoff - that's really very useful. ___ use-livecode mailing list use-livecode@lists.runrev.com Please visit this url to

Re: Navigator update: better conversion to behaviors, better property editing, better version control, and send to private commands

2018-02-06 Thread Mark Talluto via use-livecode
Just a quick FYI. I got an early build that has this fixed! Geoff Canyon is amazing. Thanks for all of your hard work on this very useful plugin. -Mark Talluto > On Feb 5, 2018, at 11:40 PM, Geoff Canyon via use-livecode > wrote: > > Or is it that it's editing

Re: SE: restore default handlers?

2018-02-06 Thread Mark Wieder via use-livecode
On 02/06/2018 02:46 PM, Geoff Canyon via use-livecode wrote: Does this do what I think it does!? i.e. make it so rev code can throw errors, be debugged, breakpointed, and stepped through. Yes, it does... but be careful with it. It will also pinpoint all the ugly errors in the IDE stacks. I

Re: any tricks to make SHELL non blocking?

2018-02-06 Thread Warren Samples via use-livecode
On 02/05/2018 11:04 PM, Stephen Barncard via use-livecode wrote: I have this open sourced app ffmpeg and I need to copy the first file from a CD, convert it to a wav file, name it, and save it to a file on a hard drive. (the executable is located in the same folder as the stack, hence the ./ )

Re: any tricks to make SHELL non blocking?

2018-02-06 Thread Warren Samples via use-livecode
On 02/06/2018 10:25 AM, Dr. Hawkins via use-livecode wrote: double quotes cause evaluation (for shell variables?), back quote (`) causes contents to execute. You seem to be using ', which is a literal. You have*SPACES* in file names. This*ALWAYS* leads to suffering. Quoting a filename does

Re: Navigator update: better conversion to behaviors, better property editing, better version control, and send to private commands

2018-02-06 Thread Mark Talluto via use-livecode
Hi Geoff, Yes. The object does have its own script. Older versions of Navigator allowed me to pick the script to edit with an option key combo/double click…or however I set up my prefs. In the current version, you can only see the objects script even if you tell it that you want to see the

Re: How to calm down the Standalone Builder?

2018-02-06 Thread J. Landman Gay via use-livecode
Sorry, I haven't a clue. One of my projects has dozens of stackfiles and I don't see this behavior. We're building for mobile though, maybe that matters. -- Jacqueline Landman Gay | jac...@hyperactivesw.com HyperActive Software | http://www.hyperactivesw.com On

Re: SE: restore default handlers?

2018-02-06 Thread Richard Gaskin via use-livecode
panagiotis merakos wrote: Thanks Richard. So, a guess is that for some reason LC cannot open the sqlite database that holds all the dictionary entries, thus it cannot fetch the list of the default handlers per object. I am wondering if this is related to the other bug report you have filed,

Re: any tricks to make SHELL non blocking?

2018-02-06 Thread Dr. Hawkins via use-livecode
On Tue, Feb 6, 2018 at 12:03 PM, Stephen Barncard via use-livecode < use-livecode@lists.runrev.com> wrote: > Mike Bonner: I'll try the Open Process suggestion you made - again with > more syntax variations this time. thanks! > > Dr Hawkins - I don't have control over the name of the CD source

Re: any tricks to make SHELL non blocking?

2018-02-06 Thread Stephen Barncard via use-livecode
Mike Bonner: I'll try the Open Process suggestion you made - again with more syntax variations this time. thanks! Dr Hawkins - I don't have control over the name of the CD source file.. 1 Audio Track.aiff the OS demuxes the data on the CD and gives them generic names. surely there must be a

Re: any tricks to make SHELL non blocking?

2018-02-06 Thread Dr. Hawkins via use-livecode
On Mon, Feb 5, 2018 at 9:46 PM, Mike Bonner via use-livecode < use-livecode@lists.runrev.com> wrote: > > > (./ffmpeg -i '/Volumes/Audio CD/1 Audio Track.aiff' '/Volumes/20160518 > KJAZ > > ARCHIVE MASTER/JULY - JAN 2017/20040315-2-JD0211b.wav' &) > double quotes cause evaluation (for shell

LCS vs PHP speed test?

2018-02-06 Thread Richard Gaskin via use-livecode
Has anyone here had occasion to test relative speed of LC Server vs PHP for common tasks (file I/O, array splits, parsing, etc.)? -- Richard Gaskin Fourth World Systems Software Design and Development for the Desktop, Mobile, and the Web

Re: any tricks to make SHELL non blocking?

2018-02-06 Thread Warren Samples via use-livecode
On 02/06/2018 07:35 PM, hh via use-livecode wrote: You are obviously an expert with the shell/unix. Nothing of the sort, I'm just sharing some information I have collected from other sources and have found to work in this kind of situation :D Warren

Re: any tricks to make SHELL non blocking?

2018-02-06 Thread hh via use-livecode
> Warren S. wrote: > The dictionary says: "On OS X systems, you can use the open process > command to start up an application, but not a Unix process. To work with > a Unix process, use the shell func instead." That makes me wonder if you > can only use shell() with ffmpeg. It is not quite

Re: any tricks to make SHELL non blocking?

2018-02-06 Thread Dr. Hawkins via use-livecode
On Tue, Feb 6, 2018 at 3:28 PM, Warren Samples via use-livecode < use-livecode@lists.runrev.com> wrote: > >> > With all due respect, this is not all correct information. It is perfectly > valid to escape using single quotes (and double quotes) on the command line hmm, for spaces, that seems to

Re: SE: restore default handlers?

2018-02-06 Thread Geoff Canyon via use-livecode
On Tue, Feb 6, 2018 at 2:59 PM, Mark Wieder via use-livecode < use-livecode@lists.runrev.com> wrote: > On 02/06/2018 02:46 PM, Geoff Canyon via use-livecode wrote: > >> Does this do what I think it does!? i.e. make it so rev code can throw >> errors, be debugged, breakpointed, and stepped

Re: Navigator

2018-02-06 Thread Geoff Canyon via use-livecode
Hey, you're welcome! I'm just happy (and a bit surprised!) that it's still useful/in use. On Tue, Feb 6, 2018 at 3:03 PM, hh via use-livecode < use-livecode@lists.runrev.com> wrote: > > Mark T. wrote: > > Geoff Canyon is amazing. > > Thanks for all of your hard work on this very useful plugin. >

Re: Navigator

2018-02-06 Thread PEL via use-livecode
Geoff, Add me to the list of long-time happy users. Paul Looney > On Feb 6, 2018, at 7:33 PM, Geoff Canyon via use-livecode > wrote: > > Hey, you're welcome! I'm just happy (and a bit surprised!) that it's still > useful/in use. > > On Tue, Feb 6, 2018 at