on 8/25/04 5:43 AM, [EMAIL PROTECTED] at
[EMAIL PROTECTED] wrote:
Date: Tue, 24 Aug 2004 22:34:17 -0600
From: Barry Levine [EMAIL PROTECTED]
Subject: RE: Do we have synthetic speech in WindowsXP yet?
I'm at the tail end of two years using Rev and we haven't had speech on
WindowsXP. I'm
Hi Ken and Scott,
Date: Tue, 31 Aug 2004 21:56:03 -0500
From: Ken Ray [EMAIL PROTECTED]
Subject: Re: dragging 2 windows in synch
On 8/31/04 9:34 PM, Scott Morrow [EMAIL PROTECTED] wrote:
Hello,
Is there a technique to maintain the relative location of a secondary
stack while dragging
Hi Kevin,
Date: Wed, 01 Sep 2004 17:21:38 +0200
From: Kevin Miller [EMAIL PROTECTED]
Subject: Re: Why 10 hours for a newbie and 30 days for a programmer
On 1/9/04 5:00 pm, Fred D Yocum [EMAIL PROTECTED] wrote:
10 hours enough? With all due respect I think not.
If after spending 10
Hi Judy, Mark, sims, et al,
Date: Wed, 1 Sep 2004 18:14:06 +0200
From: sims [EMAIL PROTECTED]
Subject: Re: Why 10 hours for a newbie and 30 days for a programmer
Then Mark Brownell wrote:
If you let it ring ten times before answering it then you get an
extra ten Rev frequent traveler
Hi Klaus,
Date: Wed, 1 Sep 2004 20:03:59 +0200
From: Klaus Major [EMAIL PROTECTED]
Subject: Re: Who is chuck yeager?
Hi Marian,
Famous (and highly daring) fighter jock/test pilot... a key figure in
the movie The Right Stuff.
Actually, the most important achievment of Chuck Yeager, and
Hi Mark,
Subject: Re: Who is chuck yeager? (OT)
To: How to use Revolution [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]
Oh, and one more historical item. I think he was the only fighter
pilot at
the end of WWII to shoot down the famous German jet from a
piston-engine
propellered
Hi Eric,
Date: Fri, 3 Sep 2004 11:22:52 -0700 (PDT)
From: Eric Engle [EMAIL PROTECTED]
Subject: Re: Who is chuck yeager? (OT)
The jet you are refering to is the Me-262 (messerschmitt): it was not the only
high speed jet aircraft, however it was the most reliable and produced in the
I reckon you guys have seen this famous picture of a F-18 Hornet.
Once-in-a-lifetime shot, eh (watch linewraps)?
http://www.chinfo.navy.mil/navpalib/ships/carriers/constellation/con-sndbar
.jpg
Ken N.
___
use-revolution mailing list
[EMAIL PROTECTED]
Hi Mark,
Date: Fri, 3 Sep 2004 15:55:50 -0700
From: Mark Brownell [EMAIL PROTECTED]
Subject: Re: Who is chuck yeager? (OT)
then again I might just be kidding again.
;-)
I wonder what the park rangers had to say about that.
Ken N.
___
**
Hi folks,
May I jump into this one?
--
Date: Thu, 23 Jan 2003 11:10:51 +0100
Subject: Re: VS: newbie: how play sounds in RR
From: Klaus Major [EMAIL PROTECTED]
..
This will NOT work, if you are using QuickTime in your stack.
I found out that you have to choose: QT or
Hello group,
I'm investigating the possibilities of recording with RR. We can, if
necessary, limit the discussion to Macintosh for the present.
In HC, I took a challenge to quickly develop a stack that had an ability to
record voice responses to various stimuli with a settable duration. That is,
**
Domo arigato.
--
Date: Fri, 24 Jan 2003 10:51:18 +0100
Subject: Re: VS: newbie: how play sounds in RR
From: Klaus Major [EMAIL PROTECTED]
This will list some info about the multimedia-possibility on windows.
on mouseUp
put mciSendString(sysinfo all quantity) into xMax
Hello Revolutionaries,
I haven't been able to get my mouse scroll wheel to work with the vertical
scrollbars. Is there a way to implement that?
Mac G4, OS 9.1; Compaq, Windows XP Pro.
TIA,
Ken N.
___
use-revolution mailing list
[EMAIL PROTECTED]
**
Date: Sun, 26 Jan 2003 20:18:20 -0800
Subject: Re: No scroll wheel (newbie stuff)?
From: Scott Rossi [EMAIL PROTECTED]
Recently, Ken Norris (dialup) wrote:
I haven't been able to get my mouse scroll wheel to work with the vertical
scrollbars. Is there a way to implement
Date: Mon, 27 Jan 2003 11:56:12 -0700
Subject: Re: No scroll wheel (newbie stuff)?
From: Alex Rice [EMAIL PROTECTED]
I was thinking scrollwheel support would be native to RR
I agree it should be added, because I use a scrollwheel too. However I
wouldn't take it for granted that virtually
**
Hello fellow scripters:
Date: Mon, 27 Jan 2003 13:38:50 -0700
Subject: Re: No scroll wheel (newbie stuff)?
From: Alex Rice [EMAIL PROTECTED]
On Monday, January 27, 2003, at 01:34 PM, Scott Rossi wrote:
Nope, definitely not Windows only. Might have to do with the version
of
**
Date: Mon, 27 Jan 2003 18:13:29 -0700 (MST)
From: Scott Raney [EMAIL PROTECTED]
Subject: Re: No scroll wheel (newbie stuff)?
--
This is corn-fusin'. In the first sentence you said:
--
Correction: it's most assuredly *not* part of Mac OS and there isn't
even any API
**
Date: Tue, 28 Jan 2003 11:56:58 -0700 (MST)
From: Scott Raney [EMAIL PROTECTED]
Subject: Re: No scroll wheel (newbie stuff)?
Mouse wheels *do* work on Win32, MacOS, and Linux systems because
there is OS API support for this hardware feature on these platforms.
--
One
**
Date: Wed, 29 Jan 2003 18:45:57 +1100
Subject: Re: To grab or not to grab
From: Matt Denton [EMAIL PROTECTED]
Geoff, any clues how I might get an object to stay within the rect of
its contained group? I tested the form below (my original code was
similar to this) but it doesn't
Well members,
This is probably the single thing that has prevented me from getting full on
into RR.
For many months, I go back in from time to time and try to get my full
screen 800x600 pixel jpeg image to show in the dev environment with no
success.
I've been told the menus (which are really
**
Date: Wed, 5 Feb 2003 01:51:49 +0900
Subject: Re: storing images
From: mark mitchell [EMAIL PROTECTED]
I finally understand this thread. I couldn't figure out how set the
icon of button 1 to myImage could possibly be described as inelegant
(especially relative to HC's resource
Hello Rev list,
Here's the scenario (I've posted some of this 8 or 9 months ago, but I think
I'm actually ready to work on it in Rev now):
In my HC stack I have 2 full screen images of a keyboard and a couple of
fields. One is a set of UP keystate images and the other is a set of DOWN
keystate
Hello Rev list,
Well, with much advice and work I finally got my full screen stack to stay
put. Whew! It was quite the procedure.
I finally got it into position by
1) Setting editMenus to true. I didn't know I had to do that.
2) Resetting the dim's of the stack. I'd already tried that dozens
***
Hi James,
From: [EMAIL PROTECTED]
Subject: [OT]: Revolution Polo Shirts/T-Shirts
Date: Wed, 5 Feb 2003 09:12:27 -0500
This may have come up before, but are there any plans to have Revolution
apparel?
I would proudly wear a Revolution Polo-type shirt to work.
T-Shirts and caps
**
From: Stephen Messimer [EMAIL PROTECTED]
Sent: Wednesday, February 05, 2003 3:32 PM
Subject: Animations in groups
Hi,
I would really like to use the animation manager to make animations in
groups. This would allow me to hide the group after the animation is
shown. Thus far I
**
Hi Jan,
--
Date: Thu, 6 Feb 2003 01:29:38 -0800 (PST)
From: Jan Schenkel [EMAIL PROTECTED]
Subject: Re: More about images
I'd rather write a
simple routine that will do the same as it does in
HC with Uli's xDraw: Draw
corresponding button rects of the DOWN state image.
***
Date: Fri, 7 Feb 2003 22:54:31 -0800 (PST)
From: Jan Schenkel [EMAIL PROTECTED]
Subject: Re: More about images
Hi Ken,
Let's see if I got this right:
- there's one large image with all the keys in their
DOWN position
- and you only want to show a small portion of this
Hello,
I got my two images grouped with background behavior. Then I created two
like buttons to where the handler shows the part of the group I needed. Many
thanks to Jan for the help...it's hard to fathom how much time that saved.
Next, I actually cut those two test transparent buttons and
OK, here's one:
One of my disabled folks has severe motor skill deficits, exhibits basically
only gross, slow, and delayed motion, and some vision impairments, and
speech deficits.
In developing communcations, I need voice feedback as well as voice
simulation TTS.
The thing is, I sometimes need
Hi list,
When I'm at home on my boat, I work on my PB 1400c. I can develop in Rev,
but it doesn't have (and can't get) enough memory to open the docs, so I
assigned a formatted CF card as Virtual Memory in order to keep it from
crashing. However, when I open the dictionary, it slows the whole
Hi list,
I want to do something like in HC:
put line 2 of target into field MainField
Where are button contents?
Do button contents have something to do with Custom Properties? How do I set
such a thing?
Ken N.
___
use-revolution mailing list
Thanks for the Re Jeanne,
Date: Wed, 12 Feb 2003 19:05:12 -0800
From: Jeanne A. E. DeVoto [EMAIL PROTECTED]
Subject: Re: Dealing with the dictionary
At 12:32 PM -0800 2/10/03, Ken Norris (dialup) wrote:
When I'm at home on my boat, I work on my PB 1400c.
How much RAM does it have
**
Hi Geoff,
Date: Fri, 14 Feb 2003 00:43:14 -0800
Subject: Re: Dealing with the dictionary
From: Geoff Canyon [EMAIL PROTECTED]
First, it doesn't free up the memory because Revolution doesn't
actually close a stack when you close it. It remains in memory. This
can be changed by
**
Date: Sun, 16 Feb 2003 17:14:29 +1000
Subject: Re: Dealing with the dictionary
From: [EMAIL PROTECTED] [EMAIL PROTECTED]
--
I couldn't find an exporter stack per se. What's the name?
The name of the listing on the page is:
Revolution Docs - RTF, Text and HTML
Hi list,
I've been following the image threads, but some of it evades me. Please bear
with a newbie on this stuff.
I have a button (there may be at up to 14 more of these) which does icon
hiliting using referenced images. Pretty normal so far.
When I first brought in the referenced images from
Back again,
In Rev as in HyperCard, clicking operations outside a field can cause the
blinking cursor to quit.
In my stack, I use the type command to simulate keyboard typing into a
field.
In HC we can use various handler devices surrounding the selectedChunk
feature to restore the blinking
Hello list,
What's the best way to install new .jpg images in a standalone?
Note: If you have a script, great, but I'm just looking for ideas.
TIA,
Ken N.
___
use-revolution mailing list
[EMAIL PROTECTED]
**
Date: Mon, 17 Feb 2003 23:26:45 -0800
Subject: Using referenced images for icons
From: Ken Norris (dialup) [EMAIL PROTECTED]
1) If I drag out of the button and release, the window stays open and the
DOWN image (hScroll/vScroll) persists because the mouseUp handler
Date: Tue, 18 Feb 2003 11:57:10 -0700
Subject: Why... is the selected text deselected?
From: Alex Rice [EMAIL PROTECTED]
In the docs troubleshooting item Why... is the selected text
deselected?, I was looking for an explanation of why a field's
selection is deselected just by moving from
Hello list,
I had a terrible day with Rev yesterday:
1) When I put away a dialog, the Tool Palette would disappear with it, most
of the time, but not _every_ time (inconsistent).
2) I lost 3 images and 1 button.
3) 5 other buttons got displaced halfway across the screen in the same row
just by
**
Date: Wed, 19 Feb 2003 12:04:18 +0100
Subject: Re: Clueless loss
From: Wolfgang M. Bereuter [EMAIL PROTECTED]
Sometimes you dont think at the most closest thing.. (Dont know if you
say it like that in english...)
I work a lot with importing images as controls. The simplest way to
**
Date: Wed, 19 Feb 2003 13:07:35 -0700
Subject: Indirection question
From: Barry Levine [EMAIL PROTECTED]
on mouseUp
if currentLetter = W then put theW into theList
(etc)
answer theList
end mouseUp
Now, if I do this, the answer dialog shows theW instead of the
contents of
**
Date: Wed, 19 Feb 2003 19:46:23 -0700
Subject: Re: Why... is the selected text deselected?
From: Alex Rice [EMAIL PROTECTED]
That's just it- the field is only intended to be on the first card.
Second card has other stuff on it. I guess I wasn't being clear about
that. thanks,
**
Subject: Re: Rough day on the Revolution front
Date: Wed, 19 Feb 2003 23:09:45 -0500
From: Howard Bornstein [EMAIL PROTECTED]
I haven't done extensive testing, but my feel at this point is that Rev
2.0 is much more stable in this regard. I've seen some of the bugs that
are still
Hi all,
I don't know where the thread went, but someone asked why a stack won't open
with the UI.
I hadn't really run into that because I don't have a completed stack yet,
but it's true: If you open a stack from a folder, Rev is opened, but there
is no UI and no apparent way to get it.
And on
**
Date: Thu, 20 Feb 2003 08:38:49 -0800
From: Rob Cozens [EMAIL PROTECTED]
Subject: Ken's recent bad day.
I have not reported this because (a) I am waiting to see whether it
is fixed in v2.5 and (b) I can work around the problem by making a
card the current card before trying to
**
Date: Thu, 20 Feb 2003 22:47:04 -0800
Subject: Re: Why doesn't a stack open with the UI
From: Scott Rossi [EMAIL PROTECTED]
It sounds like you're running your stack under the Rev engine only (not the
development environment). In MetaCard, it is standard behavior that double
**
From: Chipp Walters [EMAIL PROTECTED]
Subject: RE: Rough day on the Revolution front
Date: Fri, 21 Feb 2003 02:09:05 -0600
snip
My AltArchive plugin does not auto save every XX minutes. It's used to
create incremental backups. The SmartSave plugin from Frederic Rinaldi is:
A
**
Date: Fri, 21 Feb 2003 09:44:51 -0500
Subject: Rough day on the Revolution front
From: Kurt Kaufman [EMAIL PROTECTED]
It bears occasional repetition since I had so many problems (bad saves,
sudden quits, hangs) with RR until I realized where the fault lay:
Revolution 1.1 does not
**
From: Ken Ray [EMAIL PROTECTED]
Subject: Re: Ken's recent bad day.
Date: Fri, 21 Feb 2003 08:45:45 -0600
I have not reported this because (a) I am waiting to see whether it
is fixed in v2.5 and (b) I can work around the problem by making a
card the current card before trying to
**
From: Ken Ray [EMAIL PROTECTED]
Subject: Re: Ken's recent bad day.
Date: Fri, 21 Feb 2003 08:45:45 -0600
I have not reported this because (a) I am waiting to see whether it
is fixed in v2.5 and (b) I can work around the problem by making a
card the current card before trying
**
Date: Sat, 22 Feb 2003 23:15:11 -0800
Subject: Re: Rough day on the Revolution front
From: Geoff Canyon [EMAIL PROTECTED]
This definitely sounds like a memory issue. How much physical memory
and virtual memory does your computer have? How much is assigned as a
preferred and
**
Date: Mon, 24 Feb 2003 09:21:08 -0700
Subject: Re: Rough day on the Revolution front
From: Alex Rice [EMAIL PROTECTED]
On Sunday, February 23, 2003, at 02:55 PM, Ken Norris (dialup) wrote:
I have a 128mb CF card in the PCMCIA slot as a formatted volume
assigned to
Virtual
**
Subject: Re: Rough day on the Revolution front
From: Ben Rubinstein [EMAIL PROTECTED]
on 23/2/03 9:55 pm, Ken Norris (dialup) wrote
I have a 128mb CF card in the PCMCIA slot as a formatted volume assigned to
Virtual Memory, which gives it 116mb useable VM. I've heard
Hi everyone,
I'm not quite sure how to do this:
I want to group of buttons which are already made and not in a particular
order (as in 1-40). Doing them by hand is wonky and time consuming,
Sometimes it misses, or I accidenatally mess up the position or size, too,
and have to fix it.
So, I want
**
Date: Fri, 28 Feb 2003 00:02:18 +0100
Subject: Re: More groups
From: Klaus Major [EMAIL PROTECTED]
supposed you have a list (field or var) of elements you want to group
like:
field 3
field 2
button 2
button 3
...
Then you can script (i have a field here):
on mouseUp
I tried to put a few _existing_ buttons into an existing group like this
(which is how I would've done it in HC):
Choose Cut Object from the menu, select the group, Paste.
...didn't work.
How should I do it?
Ken N.
___
use-revolution mailing list
**
Date: Fri, 28 Feb 2003 12:29:37 +1000
Subject: Re: More groups
From: Sarah [EMAIL PROTECTED]
Hi Ken,
Try stepping through with the Script Debugger. You will see that Klaus'
script builds a string from the list of objects in his field, using a
repeat for each loop. So
**
Date: Fri, 28 Feb 2003 16:10:28 +1000
Subject: Re: How to add existing buttons to existing group
From: Sarah [EMAIL PROTECTED]
You're nearly there, you just need one of these two variations on your
technique:
right-click (control-click) to bring up the contextual menu for the
on 1/11/02 2:01 PM, yves COPPE at [EMAIL PROTECTED] wrote:
Hello,
If the user click a line in a fld with the lockText property set to
true, the selection stays on the clickedLine.
I've tried to deselect the fld by writing in a script :
select empty
but it doesn't work
Someone has
Title: Re: Resizing Graphic with Rev 1.1.1b1
on 1/11/02 12:28 PM, Kim L. Smith at [EMAIL PROTECTED] wrote:
I might mention that here at Brigham Young University, we have three classes learning Revolution and Computer Assisted Instruction with close to 50 students. We teach it on both Mac and
on 1/12/02 9:11 AM, J. Landman Gay at [EMAIL PROTECTED] wrote:
FocalPoint was a commercial product written by Danny Goodman with
HyperCard 1.2.5.
--
OK. I wasn't sure. Thanks for the info. I know it was a commercial product,
but I thought it came out earlier. I did look it over, though
on 1/14/02 7:33 AM, Rolf Kocherhans at [EMAIL PROTECTED] wrote:
Can anyone help me to rewrite the function below so that it changes
upperCase to lowerCase.
This Function changes lowerCase to upperCase:
function upperCase whatStr
repeat with charNum = 1 to the number of chars in
on 1/14/02 12:38 AM, Geoff Canyon at [EMAIL PROTECTED] wrote:
At 6:38 PM -0800 1/13/02, Ken Norris (dialup) wrote:
What about Windows? There must be some kind of standard speech available.
I'm trying to find out the nomenclature for such things in Windows, so I
don't end up sifting through
on 1/15/02 11:14 AM, bmmeili at [EMAIL PROTECTED] wrote:
hi
I've still got a problem with the selectedchunk-function.
The following test-script works properly and I get the wished
chunk-description.
on mouseup
select word random(50) of field 1
put the selectedchunk
end mouseup
on 1/21/02 2:50 PM, Michael J. Lew at [EMAIL PROTECTED] wrote:
I would like to track the movement of the mouse through an array of
buttons by hilighting each button that the mouse (button already
down) passes over. However, the mouseEnter, mouseMove, mouseWithin
messages are only sent to the
on 1/21/02 4:40 PM, Philip Usher at [EMAIL PROTECTED] wrote:
on 1/21/02 5:34 PM, Michael J. Lew [EMAIL PROTECTED] wrote:
How can I get the other buttons to hilight without requiring the user
to click each individually?
Michael, try this in the card script
on mouseDown
repeat while
on 1/21/02 9:48 PM, Ken Norris (dialup) at [EMAIL PROTECTED] wrote:
on mouseEnter -- you can put the rest of this in an offscreen handler
repeat until the mouseClick
if the mouseLoc is within the rect of the target then
set the hilite of the target to true
else
set the hilite of the target
on 1/22/02 2:36 PM, Michael J. Lew at [EMAIL PROTECTED] wrote:
Thanks for all of the helpful suggestions. It is a more interesting
exercise than I expected in that the messages that one might expect
to use are blocked when the mouse is down. Perhaps they shouldn't
be...
--
Michael,
on 1/29/02 7:54 PM, J. Landman Gay at [EMAIL PROTECTED] wrote:
It is a snap in RR, it's all built in. You won't need any of the
work-arounds necessary in HC. Here's what you do:
1. Import all the pictures. You can use your existing PICT files if you
want, but they will not work cross
on 1/30/02 2:01 AM, Geoff Canyon at [EMAIL PROTECTED] wrote:
I'd go with the latter. I'm pretty sure you could script this entirely and be
done pretty quickly.
--
You're right, I'm sure, but let me see what else Jacque has to say in a
later post.
Thanks,
Ken N.
on 1/30/02 8:47 AM, J. Landman Gay at [EMAIL PROTECTED] wrote:
The method you've been using in HC is pretty inefficient and I wouldn't
bother with it in RR, especially since the capability you want is built
in. Since the only problem is the amount of labor needed to convert the
images to
Hi...back again.
I tried to figure out how to do a 'find' in the docs, but my attempts
failed. Anyone know how to do this?
Maybe we could build a simple stack that will Find in all/docs or Find in
index/docs...
Best regards,
Ken N.
___
on 1/30/02 9:03 AM, Troy Rollins at [EMAIL PROTECTED] wrote:
I'd agree that Rev has reasonably good tools for handling button states, but
I would disagree that this user's previous methods were inefficient. Ishell
supports the capabilities described (single large image with offsets), and
it
on 1/30/02 1:25 PM, Kevin Miller at [EMAIL PROTECTED] wrote:
Wouldn't it be great if we could program in TranScript for PalmOS and
PocketPC too? :-)
We're looking at these, though Palm really has a very different OS so is
most unlikely. However the other one wouldn't be so hard and might
on 1/29/02 1:48 PM, Jeanne A. E. DeVoto at [EMAIL PROTECTED] wrote:
At 4:51 AM -0800 1/29/2002, yves COPPE wrote:
What's the difference between setting the directory or setting the
default stack ?
If you mean defaultFolder (rather than default stack), there is no
difference: the folder,
on 2/1/02 5:49 AM, [EMAIL PROTECTED] at
[EMAIL PROTECTED] wrote:
Yep. Even better if it were like an output module, with the ability to
select PocketPC as the build type.
--
Troy
RPSystems
www.rpsystems.net
If this does actually happen, I agree that designing the apps on a desktop
on 2/3/02 6:16 AM, [EMAIL PROTECTED] at
[EMAIL PROTECTED] wrote:
Hello,
Does anyone know if it is possible to use a graphic image (gif, jpg, etc.)
as the actual window of a stack? What I have in mind is similar to Windows
Media Player's skins. In other words, I don't want the window to
on 2/4/02 5:21 AM, Ivers, Doug E at [EMAIL PROTECTED] wrote:
Be aware that setting the loc of an object to something like -100,-100 may
not hide it from the end user if they use multiple screens. On a Mac, the
main screen with the menubar can be any of the monitors. So for example,
if I
on 2/3/02 6:27 PM, Sarah Reichelt at [EMAIL PROTECTED] wrote:
Having struggled with AppleScript for many years, I have a few pieces of
advice.
Firstly, always write debug in an AppleScript editor before transferring
the script to HyperCard or Rev.
Secondly, do the bare minimum in
on 2/3/02 10:07 PM, Jeanne A. E. DeVoto at [EMAIL PROTECTED] wrote:
At 6:27 PM -0800 2/3/2002, Sarah Reichelt wrote:
Having struggled with AppleScript for many years, I have a few pieces of
advice.
[...]
I prefer to use a field rather than assembling the script in a Rev script
because it
Hello RR list,
I'm still looking at ways to write chunkable graphics to the screen so I can
use my image files without always having to manually copy and paste stuff
out of other files.
There have been several suggestions, but I need to know more about how
graphics work in RR, and can't really
on 2/4/02 3:15 PM, Sarah Reichelt at [EMAIL PROTECTED] wrote:
In HyperCard, you could set the language of a particular script to
AppleScript. In Rev, you don't have this option so the AppleScript has to be
stored somewhere else or assembled and then used with a do as AppleScript.
Edit the
on 2/6/02 11:06 AM, Klaus Major at [EMAIL PROTECTED] wrote:
Interesting idea. What's the purpose?
You can rotate text of course, like any other drawn thing,
Would you like to share this secret to this lovely community, please ;-)
(In case you are not talking about creating text with the
on 2/6/02 5:33 PM, Howard Bornstein at [EMAIL PROTECTED] wrote:
I also recently had a need for this. I wanted to rotate a button 90
degrees and have the label rotate with it. Unfortunately, it doesn't work.
--
Why do you need to rotate the actual button? Just rotate a graphic under a
Hello folks,
How do I import a video clip? Is it a QT file? One of my goals is to improve
training media for long term health care. HyperCard has an XCMD that allows
lots of onscreen control of QT objects. Does Rev have such a thing?
Thanks,
Ken N.
on 2/8/02 10:14 AM, Shao Sean at [EMAIL PROTECTED] wrote:
none of the above ;-) the data content (images and text) will be created as
required (much like this message) and will displayed to the user.. currently
i have no use for rotated text, just the ability to have pixel-point control
on 2/8/02 2:04 PM, Zac Elston at [EMAIL PROTECTED] wrote:
I was hoping there was a slick way to determine this like writing a loop in
the parent that allows me to bypass writing an action for my ..lets
see..30,000 circles I will end up with.
--
Can you tell us, at least whenever you
Title: Re: AppleScripts
on 2/8/02 8:33 AM, Olivier Laya at [EMAIL PROTECTED] wrote:
Hi,
I have find 'AppleScriptlangageguide .PDF' on this site :
http://www.apple.com/applescript/ ,few months ago. I hope it's always there.
--
Pain in the clock to search online while you're trying to
on 2/9/02 12:30 AM, Jeanne A. E. DeVoto at [EMAIL PROTECTED] wrote:
What version are you using?
--
1.1.1b1
--
Also: if it happens again, try command-period. If it's the problem I'm
thinking of, command-period should let you click the definition window to
close it.
--
on 2/9/02 9:40 AM, Jacqueline Landman Gay at [EMAIL PROTECTED] wrote:
The problem Ken described happened to me yesterday too, with a slight
variation. I launched Rev 1.1.1b1, did not open any stacks or do
anything else, then just chose the language ref from the menu. I typed a
search term
on 2/9/02 12:51 PM, Mat Korica at [EMAIL PROTECTED] wrote:
It would be very cool if RR were to integrate the free ImageMagick library
into Revolution. Imagine the functionality of Photoshop available through
Transcript!
--
I'm just beginning to experiment with them myself, but Rev
on 2/9/02 10:41 AM, yves COPPE at [EMAIL PROTECTED] wrote:
Hello,
In the revolution documentation stack, when you click on transcript
language, you come on the transcript language dictionary page.
There you have n option popup btn, a fld and below this fld a scrolling fld.
I'd like to
on 2/9/02 9:31 PM, J. Landman Gay at [EMAIL PROTECTED] wrote:
[EMAIL PROTECTED] wrote:
When I had 32M physical memory, I had dictionary problems--incredible
slowness opening the dictionary and closing Rev application, and frequent
crashes after choosing a search term before the definition
on 2/9/02 9:26 PM, Jeanne A. E. DeVoto at [EMAIL PROTECTED] wrote:
Have you checked the See Also lists for each term? I think you'll find
they'll lead you quickly to related terms (and e.g. the See Also list for
menu items links to the Transcript equivalent, where there is one).
--
on 2/9/02 5:16 PM, Shao Sean at [EMAIL PROTECTED] wrote:
personally i'll probably work something out cause i'm also going to need
foreign language support (whee.. writing a unicode parser will be fun)..
--
Indeed...actually, I think I just read something about that just recently,
so
on 2/10/02 9:04 AM, Geoff Canyon at [EMAIL PROTECTED] wrote:
At 6:52 PM -0600 2/9/02, [EMAIL PROTECTED] wrote:
(Down the road when you have some free time, extra memory is cheap and some
stores install it for free! It makes the whole computer behave differently,
and none more differently
on 2/9/02 5:16 PM, Shao Sean at [EMAIL PROTECTED] wrote:
i need a cross-platform, self-contained solution.. i have no idea what
software will be running on the end-users' machines.. plus i can't use
pre-generated text because i have no idea what any of the text will be..
--
Tie the
on 2/10/02 4:42 PM, [EMAIL PROTECTED] at [EMAIL PROTECTED] wrote:
I think it should be relatively easy to implement the underlying concept
in Rev/MetaCard, yes?
--
Yeah, pretty much. This is very cool. There are some things that HC handles
better, but on the other hand, in Rev/MC you
Hi...
I tried to print out some things from the Encyclopedia, but all I got was
solid black. Anyone know what's happening and/or have a cure?
Ken N.
___
use-revolution mailing list
[EMAIL PROTECTED]
1 - 100 of 203 matches
Mail list logo