Re: Mesos Executor Failing
Hi Joseph The error code is being reported as 0, and there is not much else in the logs. Regards Sumit Chawla On Wed, May 24, 2017 at 12:21 AM, Joseph Wuwrote: > There isn't a tool for this. Can you check if the Mesos agent is being > restarted (or crashing) when you launch a task? And perhaps upload some > logs around the time of the task launch. > > There is a mismatch between the exit codes you've reported though. When > you see that log line in the sandbox logs, the exit code will be "1" > (failure), rather than "0" (success). > > On Mon, May 22, 2017 at 9:30 PM, Chawla,Sumit > wrote: > >> Hi Joseph >> >> I am using 0.27.0. Is there any diagnosis tool or command line that i >> can run to ascertain that why its happening? >> >> Regards >> Sumit Chawla >> >> >> On Fri, May 19, 2017 at 2:31 PM, Joseph Wu wrote: >> >>> What version of Mesos are you using? (Just based on the word "slave" in >>> that error message, I'm guessing 0.28 or older.) >>> >>> The "Failed to synchronize" error is something that can occur while the >>> agent is launching the executor. During the launch, the agent will create >>> a pipe to the executor subprocess; and the executor makes a blocking read >>> on this pipe. The agent will write a value to the pipe to signal the >>> executor to proceed. If the agent restarts or the pipe breaks at this >>> point in the launch, then you'll see this error message. >>> >>> On Thu, May 18, 2017 at 9:44 PM, Chawla,Sumit >>> wrote: >>> Hi I am facing a peculiar issue on one of the slave nodes of our cluster. I have a spark cluster with 40+ nodes. On one of the nodes, all tasks fail with exit code 0. ExecutorLostFailure (executor e6745c67-32e8-41ad-b6eb-8fa4d2539da7-S76 exited caused by one of the running tasks) Reason: Unknown executor exit code (0) I cannot seem to find anything in mesos-slave.logs, and there is nothing being written to stdout/stderr. Are there any debugging utitlities that i can use to debug what can be getting wrong on that particular slave? I tried running following but got stuck at: /mesos-containerizer launch --command='{"environment":{},"shell":true,"value":"ls -ltr"}' --directory=/var/tmp/mesos/slaves/e6745c67-32e8-41ad-b6eb-8f a4d2539da7-S77/frameworks/e6745c67-32e8-41ad-b6eb-8fa4d2539d a7-0312/executors/e6745c67-32e8-41ad-b6eb-8fa4d2539da7-S77/ runs/45aa784c-f485-46a6-aeb8-997e82b80c4f --help=false --pipe_read=0 --pipe_write=0 --user=smi Failed to synchronize with slave (it's probably exited) Would apprecite pointing to any debugging methods/documentation to diagnose these kind of problems. Regards Sumit Chawla >>> >> >
Re: Mesos Executor Failing
There isn't a tool for this. Can you check if the Mesos agent is being restarted (or crashing) when you launch a task? And perhaps upload some logs around the time of the task launch. There is a mismatch between the exit codes you've reported though. When you see that log line in the sandbox logs, the exit code will be "1" (failure), rather than "0" (success). On Mon, May 22, 2017 at 9:30 PM, Chawla,Sumitwrote: > Hi Joseph > > I am using 0.27.0. Is there any diagnosis tool or command line that i can > run to ascertain that why its happening? > > Regards > Sumit Chawla > > > On Fri, May 19, 2017 at 2:31 PM, Joseph Wu wrote: > >> What version of Mesos are you using? (Just based on the word "slave" in >> that error message, I'm guessing 0.28 or older.) >> >> The "Failed to synchronize" error is something that can occur while the >> agent is launching the executor. During the launch, the agent will create >> a pipe to the executor subprocess; and the executor makes a blocking read >> on this pipe. The agent will write a value to the pipe to signal the >> executor to proceed. If the agent restarts or the pipe breaks at this >> point in the launch, then you'll see this error message. >> >> On Thu, May 18, 2017 at 9:44 PM, Chawla,Sumit >> wrote: >> >>> Hi >>> >>> I am facing a peculiar issue on one of the slave nodes of our cluster. >>> I have a spark cluster with 40+ nodes. On one of the nodes, all tasks fail >>> with exit code 0. >>> >>> ExecutorLostFailure (executor e6745c67-32e8-41ad-b6eb-8fa4d2539da7-S76 >>> exited caused by one of the running tasks) Reason: Unknown executor >>> exit code (0) >>> >>> >>> I cannot seem to find anything in mesos-slave.logs, and there is nothing >>> being written to stdout/stderr. Are there any debugging utitlities that i >>> can use to debug what can be getting wrong on that particular slave? >>> >>> I tried running following but got stuck at: >>> >>> >>> /mesos-containerizer launch >>> --command='{"environment":{},"shell":true,"value":"ls >>> -ltr"}' --directory=/var/tmp/mesos/slaves/e6745c67-32e8-41ad-b6eb-8f >>> a4d2539da7-S77/frameworks/e6745c67-32e8-41ad-b6eb-8fa4d2539d >>> a7-0312/executors/e6745c67-32e8-41ad-b6eb-8fa4d2539da7- >>> S77/runs/45aa784c-f485-46a6-aeb8-997e82b80c4f --help=false >>> --pipe_read=0 --pipe_write=0 --user=smi >>> >>> Failed to synchronize with slave (it's probably exited) >>> >>> >>> Would apprecite pointing to any debugging methods/documentation to >>> diagnose these kind of problems. >>> >>> Regards >>> Sumit Chawla >>> >>> >> >
Re: Mesos Executor Failing
Hi Joseph I am using 0.27.0. Is there any diagnosis tool or command line that i can run to ascertain that why its happening? Regards Sumit Chawla On Fri, May 19, 2017 at 2:31 PM, Joseph Wuwrote: > What version of Mesos are you using? (Just based on the word "slave" in > that error message, I'm guessing 0.28 or older.) > > The "Failed to synchronize" error is something that can occur while the > agent is launching the executor. During the launch, the agent will create > a pipe to the executor subprocess; and the executor makes a blocking read > on this pipe. The agent will write a value to the pipe to signal the > executor to proceed. If the agent restarts or the pipe breaks at this > point in the launch, then you'll see this error message. > > On Thu, May 18, 2017 at 9:44 PM, Chawla,Sumit > wrote: > >> Hi >> >> I am facing a peculiar issue on one of the slave nodes of our cluster. I >> have a spark cluster with 40+ nodes. On one of the nodes, all tasks fail >> with exit code 0. >> >> ExecutorLostFailure (executor e6745c67-32e8-41ad-b6eb-8fa4d2539da7-S76 >> exited caused by one of the running tasks) Reason: Unknown executor exit >> code (0) >> >> >> I cannot seem to find anything in mesos-slave.logs, and there is nothing >> being written to stdout/stderr. Are there any debugging utitlities that i >> can use to debug what can be getting wrong on that particular slave? >> >> I tried running following but got stuck at: >> >> >> /mesos-containerizer launch >> --command='{"environment":{},"shell":true,"value":"ls >> -ltr"}' --directory=/var/tmp/mesos/slaves/e6745c67-32e8-41ad-b6eb- >> 8fa4d2539da7-S77/frameworks/e6745c67-32e8-41ad-b6eb- >> 8fa4d2539da7-0312/executors/e6745c67-32e8-41ad-b6eb- >> 8fa4d2539da7-S77/runs/45aa784c-f485-46a6-aeb8-997e82b80c4f --help=false >> --pipe_read=0 --pipe_write=0 --user=smi >> >> Failed to synchronize with slave (it's probably exited) >> >> >> Would apprecite pointing to any debugging methods/documentation to >> diagnose these kind of problems. >> >> Regards >> Sumit Chawla >> >> >
Re: Mesos Executor Failing
What version of Mesos are you using? (Just based on the word "slave" in that error message, I'm guessing 0.28 or older.) The "Failed to synchronize" error is something that can occur while the agent is launching the executor. During the launch, the agent will create a pipe to the executor subprocess; and the executor makes a blocking read on this pipe. The agent will write a value to the pipe to signal the executor to proceed. If the agent restarts or the pipe breaks at this point in the launch, then you'll see this error message. On Thu, May 18, 2017 at 9:44 PM, Chawla,Sumitwrote: > Hi > > I am facing a peculiar issue on one of the slave nodes of our cluster. I > have a spark cluster with 40+ nodes. On one of the nodes, all tasks fail > with exit code 0. > > ExecutorLostFailure (executor e6745c67-32e8-41ad-b6eb-8fa4d2539da7-S76 > exited caused by one of the running tasks) Reason: Unknown executor exit > code (0) > > > I cannot seem to find anything in mesos-slave.logs, and there is nothing > being written to stdout/stderr. Are there any debugging utitlities that i > can use to debug what can be getting wrong on that particular slave? > > I tried running following but got stuck at: > > > /mesos-containerizer launch > --command='{"environment":{},"shell":true,"value":"ls > -ltr"}' --directory=/var/tmp/mesos/slaves/e6745c67-32e8-41ad- > b6eb-8fa4d2539da7-S77/frameworks/e6745c67-32e8-41ad- > b6eb-8fa4d2539da7-0312/executors/e6745c67-32e8-41ad- > b6eb-8fa4d2539da7-S77/runs/45aa784c-f485-46a6-aeb8-997e82b80c4f > --help=false --pipe_read=0 --pipe_write=0 --user=smi > > Failed to synchronize with slave (it's probably exited) > > > Would apprecite pointing to any debugging methods/documentation to > diagnose these kind of problems. > > Regards > Sumit Chawla > >
Mesos Executor Failing
Hi I am facing a peculiar issue on one of the slave nodes of our cluster. I have a spark cluster with 40+ nodes. On one of the nodes, all tasks fail with exit code 0. ExecutorLostFailure (executor e6745c67-32e8-41ad-b6eb-8fa4d2539da7-S76 exited caused by one of the running tasks) Reason: Unknown executor exit code (0) I cannot seem to find anything in mesos-slave.logs, and there is nothing being written to stdout/stderr. Are there any debugging utitlities that i can use to debug what can be getting wrong on that particular slave? I tried running following but got stuck at: /mesos-containerizer launch --command='{"environment":{},"shell":true,"value":"ls -ltr"}' --directory=/var/tmp/mesos/slaves/e6745c67-32e8-41ad-b6eb-8fa4d2539da7-S77/frameworks/e6745c67-32e8-41ad-b6eb-8fa4d2539da7-0312/executors/e6745c67-32e8-41ad-b6eb-8fa4d2539da7-S77/runs/45aa784c-f485-46a6-aeb8-997e82b80c4f --help=false --pipe_read=0 --pipe_write=0 --user=smi Failed to synchronize with slave (it's probably exited) Would apprecite pointing to any debugging methods/documentation to diagnose these kind of problems. Regards Sumit Chawla