Hello Pranav,
Thanks for your response.
My understanding for how CS allocating IP addresses to vm instance is,
Vrouter works as a dhcp server, and the template for vm is setup to dhcp
mode
When cs tries to create a vm, it picks up an available IP from the IP
Pool and assign it to targeted vm
Hi All,
I have a few questions, for which I do not have a clear answers.
1. Is there any possibility to migrate VM's between pods ? in 2.2.14 as
well as 4.0.1 versions. ?
2. What is the maximum number of hypervisors(KVM) that can be in a single
pod. The admin guide says 16, but
Hello Pranav,
I would say - in this case, though vrouter(dhcp server) binds mac and ip for
vm instance, it doesn't update vm Operating system from inside. What happens
if I setup vm's OS as static IP address mode?
Thanks
Jerry
-邮件原件-
发件人: Pranav Saxena [mailto:pranav.sax...@citrix.com]
Hi,
We need to set a serial number in the VMs bios. VMs are running with
qemu-kvm and libvirt.
The can be done by adding a parameter in the xml file.
The question is : is it possible to do so with cloudstack or prevent
cloudstack from overwriting the xml file at reboot time ?
Regards.
Hello,
i am trying to add a zone. i am using the most basic configuration.
one computer containing the sql database, management server, primary and
secondary storage and one host on which i installed xenserver.
in the last stage of the installation, primary storage and secondary
storage.
what
The IP address of where your NFS server is hosted and path where you mounted
your primary and secondary storage.
NFS Sever - ip address
Path - /x/y/z/primary
Similarly for your secondary storage.
-Original Message-
From: Seif Eddine Jemli [mailto:seifeddineje...@gmail.com]
Sent:
Hi Jiri,
If you pass ip addr to API to create VM.
- If IP addr is not in vm network cidd, or ip is not available in that
network VM creation will fail.
- If ip is not available then CS will not pick another ip.
If your case is there any other dhcp server in guest network serving ip to the
Please see my comments inline.
Thanks,
SWAMY
-Original Message-
From: Shashi Dahal [mailto:s.da...@leaseweb.com]
Sent: Friday, 26 April 2013 3:17 PM
To: users@cloudstack.apache.org
Subject: few questions: migration between pods, number of hypervisors
Hi All,
I have a few questions,
hi,
while trying to create an instance, the cloudstack UI did not detect any
template, even that have installed them, following the manuel's
instructions:
*/usr/lib64/cloud/agent/scripts/storage/secondary/cloud-install-sys-tmplt -m
/mnt/secondary -u
Hi Len,
A 'better' way if doing this is to use a base template, which just consists of
the OS, say CentOS, then use Puppet to tell each VM what it will be and
configure any additional software etc.
Oliver Leach gave a talk at the last CloudStack European User Group on this
very topic, and his
Hi Geoff,
Thanks for that.
What is also influencing my thinking is the way that the usage engine tracks
which operating system the customer is using. If I want to charge more for a
Windows Datacenter edition vs Windows Standard, don't I need to make sure that
the customer is deploying from
Hi, all
I had a problem with CS UI login.
I installed CS4.0 on CentOS6.4, I can open
http://[management-server-ip]:8080/client
but I cannot log in (I was told that the username or password was
incorrect).
The credential I used is admin:password and I think it is correct.
From google-chrome's
HI Len,
I think I may have misread your original question, Oliver's use case is to
enable the cloud provider to only have to maintain 1 Template per OS, and then
use Puppet to deploy additional software on top of the base Template.
You do still have to maintain a Template for say Windows
I'm using Cloudstack 3.02 and Xenserver 6.02.
I used Advanced Networking during setup, and I
would like to know how are the SSVM and Console
VM and the Routers should be correctly mapped
into the HW ports on the Xenserver hypervisors.
I created three networks: management, storage,
Hi,
I started an Ubuntu 12.04 server instance using an ISO, on CS 4.0.2 using KVM
hypervisor.
I tried to generate a template. I stopped the instance and through the UI
clicked on the 'generate a template icon. Ubuntu12.04 is not an available OS
choice, so I chose Ubuntu 10.04 64 bit.
It was
Warren, this might help:
https://cwiki.apache.org/confluence/display/CLOUDSTACK/CloudStack+Example+Configurations
It has example physical configurations along with the different virtual NICs
assigned to each system VM and how they relate to CloudStack's terminology
around physical and virtual
Perfect.
Thanks,
Warren
-Original Message-
From: Clayton Weise [mailto:cwe...@iswest.net]
Sent: Friday, April 26, 2013 10:33 AM
To: users@cloudstack.apache.org
Subject: RE: System VM's Routers
Warren, this might help:
Hi Seb,
On 26-Apr-2013, at 8:50 PM, Sebastien Goasguen
run...@gmail.commailto:run...@gmail.com wrote:
Hi,
I started an Ubuntu 12.04 server instance using an ISO, on CS 4.0.2 using KVM
hypervisor.
I tried to generate a template. I stopped the instance and through the UI
clicked on the
What is your management server cluster setup look like? If it is a one-node
setup, how many network interfaces do you have in the management server node?
Kelven
From: Maurice Lawler maurice.law...@me.commailto:maurice.law...@me.com
Reply-To:
Can any one help Pretty PLEASE!!!
-- Forwarded message --
From: Eren Erdemli erenerde...@gmail.com
Date: 26 April 2013 00:52
Subject: 4.1.0 Unable to communicate with VRVM after migrating to other Host
To: users@cloudstack.apache.org
Hi can someone please help me out,
Using
Make sure the vlan range, you specified when creating your zone, is trunked
to the physical switch ports you hosts are connected to.
On Apr 26, 2013 10:35 AM, Eren Erdemli erenerde...@gmail.com wrote:
Can any one help Pretty PLEASE!!!
-- Forwarded message --
From: Eren Erdemli
ChunFeng, the tool looks cool, will try out.
Nikita,
As ChunFeng explained in the test results, random algorithm will choose host
randomly - it is not same as choosing host in round-robin fashion.
Thus you may not see a balanced distribution - but you will always see the
randomness as
Not at the host level - we have balancing at cluster level based on aggregate
capacity of the cluster.
But within one cluster, hosts get chosen either by 'random' or 'firstfit' or
'userdispering'. (value of the global config vm.allocation.algorithm)
-Prachi
-Original Message-
From:
Hi there,
I'm just starting on this and I have one doubt, why CS needs these
following prerequisites:?
1. ant
2. maven (version 3)
3. Java (Java 6/OpenJDK 1.6)
4. rpmbuild or dpkg-dev?
Greetings,
José Egas
FARMAENLACE ha procesado su
Hello Kirk,Yes, when I issue the command sh /etc.init.d/cloud-set-guest-password -- I do not get any errors back. Reviewing /var/log/messages:[root@CentOS63 ~]# cat /var/log/messages |grep cloud-set-guest-password[root@CentOS63 ~]# The bash -x output is: [root@CentOS63 ~]# bash -x
Sorry...Could someone please remind me, the chain I would need to delete from ebtables to permit traversing of a secondary IP on a specified instance? == Output from Ebtables ==-A i-2-9-VM-in -s ! 6:2f:ca:0:0:c -j DROP-A i-2-9-VM-in -p ARP -s ! 6:2f:ca:0:0:c -j DROP-A i-2-9-VM-in -p ARP
Hello Everyone:I am having an issue allowing/making cloud-set-guest-password to actually work. How I installed it: Download the script file cloud-set-guest-password: Linux: http://cloudstack.org/dl/cloud-set-guest-password Windows:
Ahmad,
Spot on it!
Thank you very much!! I cant tell you how much of an earache you have saved
me!!!
Eren
On 26 April 2013 19:21, Ahmad Emneina aemne...@gmail.com wrote:
Make sure the vlan range, you specified when creating your zone, is trunked
to the physical switch ports you hosts are
that needs to be done, but it's not an official project distribution so
someone will get to it in time
Which repository is official distribution?
Some of user trying to upgrade newer version from 4.0.1 and it seems to
refer
http://cloudstack.apt-get-eu/ubuntu/ .
And release note specify above
I've been there before Eren... been there before :/
glad i could help :)
On Fri, Apr 26, 2013 at 7:10 PM, Eren Erdemli erenerde...@gmail.com wrote:
Ahmad,
Spot on it!
Thank you very much!! I cant tell you how much of an earache you have
saved me!!!
Eren
On 26 April 2013 19:21, Ahmad
Hi Maurice,
Comments inline,
On 27-Apr-2013, at 1:52 AM, Maurice Lawler
maurice.law...@me.commailto:maurice.law...@me.com wrote:
root@CentOS63 ~]# bash -x /etc/init.d/cloud-set-guest-password
+ user=root
+ DHCP_FOLDERS='/var/lib/dhclient/* /var/lib/dhcp3/* /var/lib/dhcp/*'
+
On 27-Apr-2013, at 5:10 AM, Maurice Lawler
maurice.law...@me.commailto:maurice.law...@me.com wrote:
Looking further, manually running it and checking /var/log/messages I see this:
[root@CentOS63 ~]# tail -f /var/log/messages
Apr 26 15:19:38 CentOS63 cloud: Got response from server at routerip
32 matches
Mail list logo