回复: [VOTE] Apache CloudStack 4.16.0.0 (RC2)

If the VM is repeatedly deleted and then added to the same network, it will fail Please pay attention https://github.com/apache/cloudstack/issues/5651 -邮件原件- 发件人: Mauro Ferraro - G2K Hosting 发送时间: 2021年11月1日 23:13 收件人: users@cloudstack.apache.org; Rohit Yadav ;

Status after volume is deleted

Hi,All I am using 4.15.0.0+KVM +CEPH,I found that the deleted volumes in the cloud.volumes table are divided into two situations; 1. removed!=null, state=Expunged , pool_id !=null 2. removed!=null, state=Destroy,pool_id=null After VOLUME is deleted, why are two different states recorded

Re: How to use ansible for cloudstack initialization

; > > > And I can not confirm that "Ansible felt slightly..clunky in this > > context." We made it as easy and reliable as possible to use ansible > > with cloudstack and continue to do so, if you feel, something is > > missing, feel free to get in touch. > > >

How to use ansible for cloudstack initialization

Hello everyone Does anyone use ansible to add zone/pod/cluster/host/storage to cloudstack? Currently I can only use ansible to complete the deployment of cloudstack, nfs, mysql and other services. I can't use ansible to complete operations such as adding zone/pod Can someone provide relevant

Slow to open cosnole after enabling SSL

Hi All The ACS version I use is 4.15.0.0 I set ACS Enable ssl according to the document https://www.shapeblue.com/securing-cloudstack-4-11-with-https-tls/. After ACS enabled SSL, it was found that the process of opening the VM console was very slow. Chrome debug mode discovery Open

回复: CentOS, Debian and Ubuntu templates for CloudStack

thank you for your sharing Is there a CICD solution for windows tempalte? -邮件原件- 发件人: Wido den Hollander 发送时间: 2021年3月19日 23:58 收件人: users@cloudstack.apache.org 主题: CentOS, Debian and Ubuntu templates for CloudStack Hi, At PCextreme ( https://www.pcextreme.com/ ) we have thousands

回复: [VOTE] Apache Cloudstack 4.15.0.0 and UI [RC3]

ient sort this out. In addition I would always suggest to use a hostname with Ceph and not a static IP of a monitor. Round Robin DNS pointing to the monitors is the most reliable solution. Wido > > > Regards. > > > From: li jerry > Sent:

回复: [VOTE] Apache Cloudstack 4.15.0.0 and UI [RC3]

loudstack.apache.org> 主题: Re: [VOTE] Apache Cloudstack 4.15.0.0 and UI [RC3] Hi Jerry, Can you see my reply? I'm able to add a RBD primary storage if I specify the port, should we still consider it a blocker then? Regards. ________ From: li jerry Sent: M

回复: [VOTE] Apache Cloudstack 4.15.0.0 and UI [RC3]

a PR? It seems to me that this would not be a blocker and should go in future releases. Please argue against me if you disagree. On Mon, Jan 4, 2021 at 6:48 AM li jerry wrote: > - Is this a setup that does work with a prior version? > - Did you fresh install or upgrade? > > No, T

回复: [VOTE] Apache Cloudstack 4.15.0.0 and UI [RC3]

there any RDB user that can advise on the missing configuration causing the NumberFormatException, please? On Sun, Jan 3, 2021 at 1:25 PM li jerry wrote: > Happy New Year to all. > > > Sorry, I can't add RBD primary storage when I deploy with 4.15 RC3 > > CloudStack: 4.15 RC3

Re: [VOTE] Apache Cloudstack 4.15.0.0 and UI [RC3]

Happy New Year to all. Sorry, I can't add RBD primary storage when I deploy with 4.15 RC3 CloudStack: 4.15 RC3 OS : Ubuntu 20.04.01 DB: MYSQL 8.0.22 CEPH: 15.2.8 libvirt:6.0.0 hypervisor: QEMU 4.2.1 Add main memory to report the following error: 2021-01-03 13:15:32,605 DEBUG

回复: Password reset for CentOS 8 Template

What I am trying to do now is at the Change Password Script, manually run dhclient command, and let it generate the /var/lib/dhclient/dhclient.leases, Then mondiy the change password script to read from /var/lib/dhclient/dhclient.leases On Mon, Nov 23, 2020 at 1:49 PM li jerry wrote: >

回复: Password reset for CentOS 8 Template

HI Hean Network manager supports three ways to get DHCP: dhclient, dhcpcd and internal; rhel7/centos7 default is dhclient centos8 default is internal; Cloud init and cloudstack password scripts depend on dhclient; So we need to modify / etc / network manager/ NetworkManager.conf [main] ##Add

Does CloudStack support PXC?

Hi, dear cloudstack users I see that PXC (percona xtradb cluster) has excellent functions. But it has the following limitations: Only InnoDB storage engine is supported Lock / unlock tables is not supported Lock function (get) is not supported_ LOCK(), RELEASE_ LOCK() Does cloudstack use the

How to reset password using cloud-init in cloudstack

Hi All We tried to replace the cloud-set-guest-password script with cloud-init in CentOS. l The VM is deployed through the template, and the password takes effect l Reset VM password via CloudStack, failed (cannot log in with new password) Does anyone know how to solve it? Here is the

Static NAT with multiple public interfaces uses wrong outgoing IP

HI all Recently we upgraded a set of CloudStack 4.7.1 to 4.13.1. After the upgrade, a static NAT with multiple public interfaces uses the wrong outgoing IP (all was normal before the upgrade) All NAT-failed networks have the following common points: 1. There are 2 or more public network

回复: KVM host AvailableMemory data is incorrect

ry 发件人: Andrija Panic<mailto:andrija.pa...@gmail.com> 发送时间: 2020年7月21日 14:48 收件人: users<mailto:users@cloudstack.apache.org>; li jerry<mailto:div...@hotmail.com> 主题: Re: KVM host AvailableMemory data is incorrect @li jerry<mailto:div...@hotmail.com> if ACS tells you your KV

回复: KVM host AvailableMemory data is incorrect

ere is a need. ________ From: li jerry Sent: 15 July 2020 08:27 To: users@cloudstack.apache.org Subject: KVM host AvailableMemory data is incorrect Hello everyone We use HCI to run CloudStack (KVM+CEPH). After running for a period of time, cloudstack reports that HOST has no available memor

KVM host AvailableMemory data is incorrect

Hello everyone We use HCI to run CloudStack (KVM+CEPH). After running for a period of time, cloudstack reports that HOST has no available memory. But ZABBIX monitoring shows that HOST still has a lot of available memory. By observing /proc/meminfo on KVM HOST, it is found that most of the

host memoryused data is not up to date

Hello All I have a question about host performance data I observed the CPU usage (cpuused), the management will be periodically obtained from the host, and updated to the db; Memory usage (memoryused), only update the db when restarting the cloudstack-agent; after that, no matter what changes

回复: How to use cloudstack-deb-builder to compile Non-OSS packages

quot;-Dnoredist" khos2ow/cloudstack-deb-builder:ubuntu1604 -Jerry 发件人: li jerry<mailto:div...@hotmail.com> 发送时间: 2020年6月22日 10:27 收件人: users@cloudstack.apache.org<mailto:users@cloudstack.apache.org> 主题: How to use cloudstack-deb-builder to compile Non-OSS packages Hi khos2ow The clo

How to use cloudstack-deb-builder to compile Non-OSS packages

Hi khos2ow The cloudstack-rpm-builder docker Build cloudstack you contributed is very convenient and easy to use! Thanks for your contribution cloudstack-rpm-builder docker can complete BUILD for Non-OSS (VMWRE F5) In cloudstack-deb-builder, I didn't find the corresponding method of use, can you

Re: OVS Plugin does not appear on the Network Service Providers screen

if yes, should I create a seperate bridge for this or use an existing bridge e.g. cloudbr1 (public) ? best, Po > On 4 Jun 2020, at 14:58, li jerry wrote: > > Official documents are relatively backward, no updates > > 4.13.1 Please follow the steps below > > 1: Install ope

Re: OVS Plugin does not appear on the Network Service Providers screen

Official documents are relatively backward, no updates 4.13.1 Please follow the steps below 1: Install openvswitch(build or yum) 2, change /etc/cloudstack/agent/agent.properties, add     libvirt.vif.driver=com.cloud.hypervisor.kvm.resource.OvsVifDriver     network.bridge.type=openvswitch When

Re: Run cloudstack-management in Docker

a 发送时间: 2020年5月31日 10:18 收件人: users@cloudstack.apache.org 主题: Re: Run cloudstack-management in Docker Hi Jerry, Could you share your Dockerfiles? Kind Regards, Sina > On 30 May 2020, at 17:08, li jerry wrote: > > Dear friends, if you have any experience in this area, please share.

Run cloudstack-management in Docker

Hi, friends Does anyone use docker to deploy cloudstack-management in production? In order to facilitate rapid deployment, I plan to run cloudstack-management and cloudstack-usage in docker. Deploy and test by the following deployment methods: 1. Encapsulation based on centos: centos7

Re: ACS 4.13.1 failed to create PVLAN network

not be able to communicate with each other). About multiple NICs, in my setup, I've had a VM attached to a PVLAN as well as an Isolated and it worked. Haven't tried multiple PVLANs though From: li jerry Sent: Thursday, May 28, 2020 2:05 PM To: users

Re: ACS 4.13.1 failed to create PVLAN network

led to create PVLAN network It's off master, I've built it using the PR that I shared, and yes, two bridges via ovs in my setup too! From: li jerry Sent: Wednesday, May 27, 2020 3:34 PM To: users@cloudstack.apache.org Subject: 回复: ACS 4.13.1 failed to create PV

回复: ACS 4.13.1 failed to create PVLAN network

mply merging this code in 4.13 will work fine, it may cause some side issues since it's a big gap in code bases, therefore I'll advise you to install/upgrade you test env to this PR ( 4.15 ) Bobby. On 27.05.20, 11:07, "li jerry" wrote: Thank you Boris for the information. I n

Re: ACS 4.13.1 failed to create PVLAN network

work (arping requires IP), and then specify the interface to the other L2 network attached to the same VM. Please note that this is 4.15+ and it's currently under testing, so do it in a testing lab. Thanks, On 26.05.20, 18:14, "li jerry" wrote: Dear All Who has success

ACS 4.13.1 failed to create PVLAN network

Dear All Who has successfully deployed a PVLAN network on ACS 4.13.1? I created the PVLAN network through the following process, but it failed Server: CentOS7 CloudStack 4.13.1 Zone 1： l Physical Network1 ：Public and Guest , Isolation method=VLAN, KVM traffic label=br1 l Physical Network2

Re: 4.13.1 VR ERR tcp match: only valid for protocol 6

valid for protocol 6 Jerry, I don't know what this is specifically about, but I've seen this in 4.13.0 as well, and 4.11.x etc - i.e. nothing new. I *believe* these are logged when you have VPN enabled... Best Andrija On Sun, 3 May 2020 at 05:04, li jerry wrote: > Hi all > > I updated c

4.13.1 VR ERR tcp match: only valid for protocol 6

Hi all I updated cloudstack to 4.13.1 in POC. During the observation, we found that there are a large number of the following error logs in the VR kernel. Does anyone know why? I've tried Restart VR Restart the network Restart and clean up the network Then there are these error kernel log

回复: [VOTE] Apache CloudStack 4.13.1.0 RC2

Hi Andrija Panic, we encountered this bug in production https://github.com/apache/cloudstack/issues/3958 We fixed it through this PR https://github.com/apache/cloudstack/issues/3958 I am not clear how to apply for PR merge, can you merge this patch to 4.13.1? This bug can be reproduced 100% I

回复: [VOTE] Apache CloudStack 4.13.1.0 RC2

We found this bug during the test https://github.com/apache/cloudstack/issues/4039 -邮件原件- 发件人: Andrija Panic 发送时间: 2020年4月20日 20:14 收件人: dev ; users 主题: [VOTE] Apache CloudStack 4.13.1.0 RC2 Hi All, I've created a 4.13.1.0 release (RC2), with the following artefacts up for

回复: VR deletes IP address by mistake

y to grep for the wrong IP 10.40.59.143 in the cloud.log (or any older cloud.log.gz if there are any) - there should be some traces of that IP somewhere in the logs. Also try zgrep against /var/cache/cloud/processed/vm_dhcp_entry.json* files - should be there somewhere visible - as this IP is some

VR deletes IP address by mistake

Hello All Recently, we found that VM IP lost in share network. Further analysis of the log shows that when VM is deleted, the IP address is deleted incorrectly.I can't reproduce this fault, but I've had two such incidents. Have you ever had such a situation, how to check it or is it a known bug?

回复: VXLAN Connectivity

Please check your switch port MTU value (9000), the default is 1500 Vxlan needs to modify the package header. The default MTU value will not be able to transfer data. -邮件原件- 发件人: Mr Jazze 发送时间: 2020年3月18日 6:31 收件人: CloudStack Mailing-List 主题: VXLAN Connectivity Hello Again, I've

GPU use questions under xenserver

Hello All I plan to use vgpu in passhrough mode in xenserver. I found in the code that the method of createVGPU is only rewritten in the of XenServer620SP1Resources. Does xenserver only support vgpu use under 6.2sp1 version? CloudStack 4.13.0 -Jerry

回复: Redundant NFS Storage for ACS

heartbeat times to the KVMHA directory under NFS. (have no Idea about this) Any specific steps to make it work. And What if Primary NFS server holding heartbeat fails? Will it work with another Primary NFS storage? Regards, Mark. On Sat, Feb 1, 2020 at 6:10 PM li jerry wrote: > Hi Mark > &

回复: Redundant NFS Storage for ACS

Hi Mark I can provide one of my solutions for your reference: Hypervisor = KVM CloudStack = 4.11.3 Primary Storage0 = Ceph RBD, tag = rbd Primary Storage1 = NFS Primary Storage0 stores VM Volume, Primary Storage1 stores the heartbeat of KVM (suggested capacity is 100MB) all Compute

How to create a DEB or RPM installation package for ARM

Hi rhtyd Thank you for your contribution to support armv8 PR(https://github.com/apache/cloudstack/pull/3644). How to create a DEB or RPM installation package for ARM? -Jerry

VM from ISO cannot execute restoreVirtualMachine

Hello All When I analyzed the restoreVirtualMachine API, I found that If the VM is from ISO, newTemplate can only be ISO when executing restoreVirtualMachine. Why do we have such a design? >From our application scenarios (I think most of them are the same), the VM >created by the user through

回复: Issue setting IP on a guest

Please disable security group -邮件原件- 发件人: Fariborz Navidan 发送时间: 2019年12月4日 4:13 收件人: users@cloudstack.apache.org 主题: Issue setting IP on a guest Hi guys, I am trying to set an IP address as secondary IP which is not reserved in ACS DB on a CentOS guest connected to a shared network.

回复: Unable to start a VM due to insufficient capacity

Please check the connection between your XenServer and NFS primary storage -邮件原件- 发件人: pradeep pal 发送时间: 2019年12月1日 7:23 收件人: users@cloudstack.apache.org 主题: Unable to start a VM due to insufficient capacity Hi, I am new for the CloudStack. I have

VM HA is turned on and off

Hello All I started VM HA through the calculation scheme. However, at work, it is sometimes necessary to "temporarily" shut down the HA for testing. My current practice is to directly modify cloud.ha_enabled=0; Is there any hidden danger in this operation? -Jerry

4.13 rbd snapshot delete failed

Hello All When I tested ACS 4.13 KVM + CEPH snapshot, I found that snapshots could be created and rolled back (using API alone), but deletion could not be completed. After executing the deletion API, the snapshot will disappear from the list Snapshots, but the snapshot on CEPH RBD will not

答复: Transfering global settings

After the modification is complete, restart cloudstack-management 发件人: Fariborz Navidan 发送时间: 2019年8月26日 17:15 收件人: users@cloudstack.apache.org 主题: Transfering global settings Hello, How do I transfer cloudstack global settings

答复: How to configure OVS correctly

Service Providers” configuration of the physical network with the GRE isolation type. Navigate to the OVS provider and press the “Enable Provider” button On Thu, 15 Aug 2019 at 12:23, li jerry wrote: > OVS on centos7, I've already configured. > > The document mentions that ACS disa

答复: How to configure OVS correctly

g> 主题: Re: How to configure OVS correctly Hi Li, check this one: https://www.shapeblue.com/networking-kvm-for-cloudstack-2018-revisit-for-centos7-and-ubuntu-18-04/ Cheers Andrija On Thu, 15 Aug 2019 at 12:16, li jerry wrote: > Hello > > When I configure OVS according

How to configure OVS correctly

Hello When I configure OVS according to documents (http://docs.cloudstack.apache.org/en/4.11.2.0/plugins/ovs-plugin.html?Highlight=ovs#configuring-the-ovs-plugin), I can't find the OVS service provider. How should I configure and use OVS correctly? Tip: This document does not seem to have

VR Loses Instance IP Address

Hi All After our ACS is upgraded to 4.11.3, the VM on the shared network usually loses its IP address (it cannot get an IP address in the guest VM). Analysis of the cloud.log in vr, we found that sometimes restarting or deleting the A VM will cause the B VM to disappear in

xenserver add multiple local storage

Hello all My ACS 4.11.3+ xenserver 7.1.3 +iscsi shared storage. We plan to add multiple SSD hard drives to each HOST, and each SSD hard drive is made into an SR. These SRs are added to the ACS for local storage. Proceed as follows : 1, create an SR of the SSD disk 2, add a record to the

答复: Cancel the async task in execution

in execution An aggressive way is to restart all mgmt servers - all async jobs will be cleared our / fail - but there is also a way to wipe from async_job table or similar, but I can't remember that from top of my head now... On Tue, 6 Aug 2019 at 12:03, li jerry wrote: > Hello all > > Is there

Cancel the async task in execution

Hello all Is there an asynchronous task already in progress, is there any way to stop it and cancel it? (Can I change the database?) Scenes: Volume migrates across the pool. Due to the large volume capacity, offline migration takes a long, long, and long time, so it needs to be cancelled.

multiple cloudstack-usage work together

Hello ALL In order to solve the problem of high availability of management, I deployed 2 cloudstack-management services and also deployed two cloudstack usage services. How do these two cloudstack usage services work?

答复: Ansible deploy cloudstack and add zone

up zones, projects, networks, > compute offering, pods, clusters and hosts. > > Make sure to use current Ansible 2.8 or newer. See > https://docs.ansible.com/ansible/latest/modules/list_of_cloud_modules.html > > regards, > > Jfn > > On Wed, Jul 24, 2019 at 12:23 PM l

Ansible deploy cloudstack and add zone

Hello All I saw in the community documentation that you can deploy a set of cloudstacks via ansbile. Is there any way to quickly initialize CLOUDSTACK (create ZONE, add host, etc.) through ansbile or other tools?

答复: The role of CPU (in MHz) in Compute Offerings

t; is set on the Compute Offering https://github.com/apache/cloudstack/pull/2482 So in other words, need to define CPU cap on the Compute/Service offerings. Cheers On Fri, 19 Jul 2019 at 06:44, li jerry wrote: > Hello all > > What is the role of the CPU (in MHz) parameter in Compute Offe

答复: Agent LB for CloudStack failed

In order to facilitate tracking, I created a new issue. https://github.com/apache/cloudstack/issues/3505 Welcome to update, thank you 发件人: li jerry 发送时间: Friday, July 19, 2019 8:25:27 PM 收件人: d...@cloudstack.apache.org ; users@cloudstack.apache.org

答复: Agent LB for CloudStack failed

ent LB for CloudStack failed Ok, I'll try replicating and get back to you. Regards, Nicolas Vazquez From: li jerry Sent: Thursday, July 18, 2019 4:41 AM To: users@cloudstack.apache.org ; d...@cloudstack.apache.org Subject: 答复: Agent LB for CloudStack failed I

The role of CPU (in MHz) in Compute Offerings

Hello all What is the role of the CPU (in MHz) parameter in Compute Offerings? I created two computing schemes CPU (in MHz) = 500, CPU (in MHz) = 2000 Then two VMs were created through these two computing schemes on top of xenserver 7.1.2. I can't see the difference between these two programs

答复: Agent LB for CloudStack failed

. Regards, Nicolas Vazquez ________ From: li jerry Sent: Thursday, July 18, 2019 12:00 AM To: d...@cloudstack.apache.org ; users@cloudstack.apache.org Subject: 答复: Agent LB for CloudStack failed Hi Nicolas test-ceph-node01 [root@test-ceph-node01 ~]# cat

答复: Agent LB for CloudStack failed

, Nicolas Vazquez ________ From: li jerry Sent: Monday, July 15, 2019 10:20 PM To: users@cloudstack.apache.org ; d...@cloudstack.apache.org Subject: Agent LB for CloudStack failed Hello everyone My kvm Agent LB on 4.11.2/4.11.3 failed. When the preferred managment node is forced to po

Agent LB for CloudStack failed

Hello everyone My kvm Agent LB on 4.11.2/4.11.3 failed. When the preferred managment node is forced to power off, the agent will not immediately connect to the second management node.After 15 minutes, the agent issues a "No route to host" error and connects to the second management node.

答复: Unable to release computing resources

ermanent accounted against an account until VM is removed. Buy I might be wrong - on the specific Account page/tab in UI, there is something like " update resource count" button, which should give you the up-to-date numbers of different resources used. Best, Andrija On Wed, Jul 10, 2019, 17:11

答复: Unable to release computing resources

monkey for example: list capacity fetchlatest=true). Regards, Rohit Yadav Software Architect, ShapeBlue https://www.shapeblue.com From: li jerry Sent: Tuesday, July 9, 2019 8:02:38 PM To: d...@cloudstack.apache.org; users@cloudstack.apache.org Subject: Una

Unable to release computing resources

Hi ALL I want VM to automatically release computing resources (CPU and RAM) after shutdown. I try to change the Message.ReservedCapacityFreed.Flag parameter of VM to false. When VM is turned off, the CPU and memory in resource_count are not released. Excuse me, is there anything I haven't

答复: Changing MAC address

Direct editing of XML is invalid. Create VM through API and specify MAC address at creation time Http://cloudstack.apache.org/api/apidocs-4.11/apis/deployVirtualMachine.html 发送自 Windows 10 版邮件应用 发件人: Fariborz

答复: CloudStack not finding guest_os_type for XenServer 7.1.2

I encountered this problem and my solution was to add 7.1.2 support manually. INSERT IGNORE INTO `cloud'. `guest_os_hypervisor'(uuid, hypervisor_type, hypervisor_version, guest_os_name, guest_os_id, created, is_user_defined) SELECT UUID (), `Xenserver', `7.1.2', guest_os_name, guest_os_id,

VM online migration solution

HI All Cluster information: XENSERVER 7.1.2 CloudStack 4.11.2 During the testing process, we found that the success rate of migrating VM (Migrate instance to another host) through ACS UI interface is very low (Volume has a large capacity, there will be timeouts); However, the success rate of

答复: HOST HA based on ceph(rbd)

eph(rbd) I assume you are referring to the heartbeat scripts (i.e.kvmheqrtbeat.sh) that check/write to storage every now and then and if storage is unavailable, will restart KVM host ? If so, then yes, there is some effort already about same kind of thing on Ceph, without clear ETA. On Fri, Jun

HOST HA based on ceph(rbd)

Hi All CLOUDSTACK HOST HA is based on NFS for heart rate detection and HA triggering according to test results. But now CEPH (rbd) +KVM is very stable, and it is also the preferred solution for a large number of cloudstack users. Does the community consider extending host ha's heart rate

KVM HA fails under multiple management services

M agents will always connect to that one mgmt host that is the first one in the in the "host" list. Regards, Andrija nicolas.vazq...@shapeblue.com www.shapeblue.com<http://www.shapeblue.com> Amadeus House, Floral Street, London WC2E 9DPUK @shapeblue On Sat, 22 Jun 2019 at

KVM HA fails under multiple management services

Hello everyone I recently tested the multiple management services, based on agent lb HOST HA (KVM). It was found that in extreme cases, HA would fail; the details are as follows: Two management nodes, M1 (172.17.1.141) and M2 (172.17.1.142), share an external database cluster Three KVM

答复: Create VM prompt SR backend failure

..@cloudstack.apache.org 主题: Re: Create VM prompt SR backend failure Li, please check the logs on XenServer, they should contain the error message explaining why volume creation failed. Best Andrija On Wed, 19 Jun 2019 at 17:24, li jerry wrote: > Hi, All > > I have a cloudsta

Create VM prompt SR backend failure

Hi, All I have a cloudstack + xenserver+iscsi cluster with five nodes: node01, node02, node03, node04 and node05. cloudstack version is 4.11.2 XenServer version is 7.1.2 Primary storage is iSCSI When the newly created VM is assigned to node05, the following errors are prompted in the log:

Host's HA failed!

Hell All We are trying to deploy VMs as cloudstack management nodes over the compute nodes, like hyper-converged infrastructure. But we found some issue with the HA switch. The test is based on CentOS 7.6 and CloudStack 4.11.2. The primary storage is NFS. We have enabled VM HA and Host HA, and

答复: 答复: RBD primary storage VM encounters Exclusive Lock after triggering HA

, 2019 7:50:43 PM 收件人: li jerry; d...@cloudstack.apache.org; users@cloudstack.apache.org 主题: Re: 答复: RBD primary storage VM encounters Exclusive Lock after triggering HA On 5/28/19 1:48 PM, li jerry wrote: > Hi Wido > > > > I filled in the CLOUDSTACK is the following KEY > >

答复: RBD primary storage VM encounters Exclusive Lock after triggering HA

rbd" 发件人: Wido den Hollander<mailto:w...@widodh.nl> 发送时间: 2019年5月28日 19:42 收件人: d...@cloudstack.apache.org<mailto:d...@cloudstack.apache.org>; li jerry<mailto:div...@hotmail.com>; users@cloudstack.apache.org<mailto:users@cloudstack.apache.org> 主题: Re: RBD primar

RBD primary storage VM encounters Exclusive Lock after triggering HA

Hello guys we’ve deployed an environment with CloudStack 4.11.2 and KVM(CentOS7.6), and Ceph 13.2.5 is deployed as the primary storage. We found some issues with the HA solution, and we are here to ask for you suggestions. We’ve both enabled VM HA and Host HA feature in CloudStack, and the

dynamically scalable of kvm

HI All Does CLOUDSTACK now support dynamic scalable of KVM? I found that KVM was already supported.

How CopyCommand Chooses the Host to Execute Commands

Hi all ACS 4.11.2 + XENSERVER 7.1.2, when creating an instance, why the host that executes the CopyCommand command is not the host that is elected to run the VM Before CopyCommand is executed, a log like this is output: 2019-04-28 21:59:05,015 DEBUG [c.c.h.XenServerGuru]

XenServer High Availability Configuration

Hi All I take over XenServer 7.1.2 through cloudstack (4.11.2). In order to realize HA of VM and HOST, I open HA on XENSERVER (all VM select "Dot not restart"). ISO NFS SR (i-2-43-VM-ISO) cannot be deleted after VM unloads ISO after HA is turned on. Once the same ISO is mounted again to the

答复: 答复: Cloudstack-agent gets the local IP address exception

servers, than install the management server there. cu Swen -Ursprüngliche Nachricht- Von: li jerry Gesendet: Dienstag, 23. April 2019 16:01 An: d...@cloudstack.apache.org; users@cloudstack.apache.org Betreff: 答复: 答复: Cloudstack-agent gets the local IP address exception Hi Dag Sonstebo

答复: Cloudstack-agent gets the local IP address exception

-lb-for-cloudstack/ Let me know if this works for you. Best, Andrija On Tue, 23 Apr 2019 at 14:59, li jerry wrote: > HI Dag Sonstebo > > We deploy management and agent on the same host, with three such nodes. > So we need to deploy keepalived on these three nodes, elect a VIP, a

答复: 答复: Cloudstack-agent gets the local IP address exception

e there is nothing in the CloudStack KVM agent which will allow for the configuration you have in place, so you would have to deploy your own manual workarounds for this. Regards, Dag Sonstebo Cloud Architect ShapeBlue On 23/04/2019, 13:59, "li jerry" wrote: HI Dag Sonstebo We

答复: Cloudstack-agent gets the local IP address exception

am, not keepalived. Regards, Dag Sonstebo Cloud Architect ShapeBlue On 22/04/2019, 14:37, "li jerry" wrote: HI All my kvm host [ip:10.226.16.11] virtualized a vip[10.226.16.10] via keepalived. After I started the cloudstack-agent, I got vip[10.226.16.10] and I

Cloudstack-agent gets the local IP address exception

HI All my kvm host [ip:10.226.16.11] virtualized a vip[10.226.16.10] via keepalived. After I started the cloudstack-agent, I got vip[10.226.16.10] and I couldn't get the correct IP [10.226.16.11]; Can I have any way to get the cloudstack agent to get the correct IP address? Cloudstack

答复: Loop snapshots are not automatically deleted

, li jerry wrote: > Hi, Andrija > After the snapshot is manually created and deleted, the > snapshot on ceph has been deleted normally. > > > Jerry > > -邮件原件- > 发件人: Andrija Panic > 发送时间: 2019年4月8日 22:12 > 收件人: users > 抄送: d...@cloudstack

答复: Loop snapshots are not automatically deleted

please test with a new volume, make a few snapshots manually, and then delete one by one, observing if snapshots is deleted from Ceph ? Long days ago, this ^^^ was an issue, with serious consequences on performance - hope it's not back... Andrija On Mon, 8 Apr 2019 at 14:21, li jerry wrote

Loop snapshots are not automatically deleted

Hi,ALL I created a loop snapshot on cloudstack 4.11.2 +CEPH 10.2.11.Execute at 3 am every day, keep 3 copies.After a period of observation, I found that the snapshot on cloudstack always shows 3 copies.However, ceph found that the snapshot on rbd is added every day and never deleted.

答复: 答复: CloudStack 4.11.2 Snapshot Revert fail

logger.warn(msg); //throw new CloudRuntimeException(msg); guestOsTypeName = "Other install media"; } This rude modification, I don’t know if it will create other new problems…. 发件人: li jerry<mailto:div...@hotmail.com> 发送时间: 2019年1月23日 17:16 收件人: users@cloudstack.apache

答复: 答复: CloudStack 4.11.2 Snapshot Revert fail

I tried, modified the VM to CENTOS6.5 (64-bit) and reported the same error. 发件人: Andrija Panic 发送时间: 2019年1月23日 16:38 收件人: dev 抄送: users@cloudstack.apache.org 主题: Re: 答复: CloudStack 4.11.2

答复: CloudStack 4.11.2 Snapshot Revert fail

st On Tue, 22 Jan 2019 at 17:52, li jerry wrote: > HI ALL > > I use CloudStack 4.11.2 to manage Xenserver 7.1.2 (XenServer CU2). > > VM snapshot for revert failure (snapshot does not contain memorysnapshot). > > 2019-01-23 00:06:54,210 DEBUG [c.c.a.m.ClusteredAgentAttache] &g

CloudStack 4.11.2 Snapshot Revert fail

HI ALL I use CloudStack 4.11.2 to manage Xenserver 7.1.2 (XenServer CU2). VM snapshot for revert failure (snapshot does not contain memorysnapshot). 2019-01-23 00:06:54,210 DEBUG [c.c.a.m.ClusteredAgentAttache] (Work-Job-Executor-156:ctx-28f7465a job-2867/job-2869 ctx-a04e0ed9)

4.10 The listHostsMetrics API returns the error cpuallocatedghz and cputotalghz

HI ALL In my cloudstack 4.10.0.0, requesting the listHostsMetrics API returns the error cpuallocatedghz and cputotalghz; In the following API HOST, only one VM (4VCPU, 2.0Vhz per VCPU, 8.0Ghz per VCPU) is run. There are two Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz CPUs on the HOST

答复: Build CloudStack 4.10.0 Error

s. > > > Regards, > Rohit Yadav > > > From: li jerry > Sent: Tuesday, November 13, 2018 9:04:34 PM > To: users@cloudstack.apache.org; d...@cloudstack.apache.org > Subject: Build CloudStack 4.10.0 Error > > Hi All > >I made a mistake in compiling clouds

Build CloudStack 4.10.0 Error

Hi All I made a mistake in compiling cloudstack 4.10.0 through docker image (khos2ow/cloudstack-deb-builder: 14.04). Please help me. Thank you! --- T E S T S --- Running

答复: Runing cloudstack failed in docker

I found the problem and solved it. /etc/cloudstack/management/server.properties Bind.interface=:: change into Bind.interface=0.0.0.0 Restart cloudstack-management Jean-Francois thank you very much. 发件人: li jerry 发送时间: Monday, November 5, 2018 10

  1   2   >