*From:* CK [mailto:cloudw...@gmail.com]
> *Sent:* Friday, May 17, 2013 8:35 AM
> *To:* users@cloudstack.apache.org
> *Cc:* Musayev, Ilya
>
> *Subject:* Re: Template download stuck at 1%
>
> ** **
>
> My SSVM interfaces are as follows...As a test I dropped eth1 a
ssue still persists. If
your web server and CS MGMT host are on the same network, paste the output of
"netstat -nr"
From: CK [mailto:cloudw...@gmail.com]
Sent: Friday, May 17, 2013 8:35 AM
To: users@cloudstack.apache.org
Cc: Musayev, Ilya
Subject: Re: Template download stuck at 1%
My SS
10:02 PM
> To: users@cloudstack.apache.org
> Subject: Re: Template download stuck at 1%
>
> Stop firewall and see if it helps.
>
>
> Original message
> From: CK mailto:cloudw...@gmail.com>>
> Date:
> To: users@cloudstack.apache.org<mailto:us
I would also check that MTU is properly set across the board and no packets are
dropped on the switch or elsewhere.
From: Musayev, Ilya
Sent: Wednesday, May 15, 2013 10:02 PM
To: users@cloudstack.apache.org
Subject: Re: Template download stuck at 1%
Stop firewall and see if it helps
Stop firewall and see if it helps.
Original message
From: CK
Date:
To: users@cloudstack.apache.org
Subject: Re: Template download stuck at 1%
Running wget to download a template as a test on the SSVM starts off fine
and then after several seconds (10+) the download grinds
Running wget to download a template as a test on the SSVM starts off fine
and then after several seconds (10+) the download grinds down to 0Kb/s -
the ETA starts to go up.
Doing the same wget download from the MS host works fine the template is
downloaded in full - no timeouts.
Looking in the log
On Wed, May 15, 2013 at 12:40:47AM +0100, CK wrote:
> Running a fresh install of ACS on Centos 6.4 with KVM as the host. Having
> setup a basic zone the CentOS 5.5(64-bit) no GUI (KVM) template is stuck at
> 1% downloaded.
>
> I have run through the SSVM troubleshooting guide and everything appear