Dear List,
In the lab I am experiencing full Dom0 host crashes on Cloudstack 4.5 and
Xenserver 6.5 using the Windows 2012 R2 VHD template from the Microsoft site.
Cannot reproduce in test on Dell R720 or Sun X4470, this appears to be
specific to Windows 2012 R2 on Dell R910 Hardware running
Hi,
Thank u, i solve the problem.
Problem : I installed ISO with select " Windows 2012 64 " then i create new
vm and prepare to template and try to install virtIO devices. So i see only
default windows devices.
Solution : when i create new vm from ISO i must install with " Win
> To: users@cloudstack.apache.org
> Sent: Saturday, 30 January, 2016 21:03:58
> Subject: İlt: Re: İlt: Re: windows 2012 ethernet driver
> Hi,
> Yes i have installed virtio devices except network. İ dont understand why vm
> network decice still use intel.
> Tolga Demir
> Samsung cihazı
: İlt: Re: windows 2012 ethernet driver
Tolga,
First please note the mailing list will delete any attachments, use a pastebin
service instead.
Secondly, have you installed on VirtIO devices when you prepared your template?
Lucian
--
Sent from the Delta quadrant using Borg technology!
Nux
-
> From: "Semih Tolga DEMİR"
> To: users@cloudstack.apache.org
> Sent: Wednesday, 27 January, 2016 11:02:09
> Subject: Re: İlt: Re: windows 2012 ethernet driver
> Hi Nux,
>
> When i create new template i selected Windows PV or Other PV 64 bit as you
>
Hi Nux,
When i create new template i selected Windows PV or Other PV 64 bit as you
recommend. But i saw an error page.
"Windows failed to start. A recent hardware or software change might be the
cause. To fix the problem.
...
"
What do you offer after tihs error message?
Note: I attach the error
: users@cloudstack.apache.org
> Sent: Saturday, 16 January, 2016 17:20:38
> Subject: İlt: Re: windows 2012 ethernet driver
> Hi,
> I Use Windows 2012 64 bit when i am add my Template.
> Tolga Demir
>
>
> Samsung cihazımdan gönderildi
>
> Orjinal mesaj --
Hi,
I Use Windows 2012 64 bit when i am add my Template.
Tolga Demir
Samsung cihazımdan gönderildi
Orjinal mesaj
Kimden: Nux!
Tarih: 15 01 2016 23:26 (GMT+02:00)
Alıcı: users@cloudstack.apache.org
Cc: users-i...@cloudstack.apache.org
Konu: Re: windows 2012
Friday, 15 January, 2016 09:12:25
> Subject: windows 2012 ethernet driver
> Hi,
>
> I configure windows server 2012 on cloudstack over KVM host and i installed
> required fedora drivers but i have a problem about current network devices
> on device manager.
>
> I expe
Hi,
I configure windows server 2012 on cloudstack over KVM host and i installed
required fedora drivers but i have a problem about current network devices
on device manager.
I expect that becaue its over KVM there should be paravirtualized network
device but windows detects only"Intel PRO/1000MT
mothy Lothering <
tlother...@datacentrix.co.za> wrote:
> Hi Jeff,
>
> I have seen a similar issue whereby new VMs from Template (Windows 2012 &
> 2012 R2) do not have their passwords reset upon first time boot. I have not
> had any luck in getting it to work. Any advice here is h
Message -
> > From: "Jeff Hair"
> > To: users@cloudstack.apache.org
> > Sent: Tuesday, 2 June, 2015 11:15:23
> > Subject: Re: Cloud Instance Manager only sets password after reboot on
> Windows 2012 R2
>
> > Hi,
> >
> > This is specifically f
> To: users@cloudstack.apache.org
> Sent: Tuesday, 2 June, 2015 11:15:23
> Subject: Re: Cloud Instance Manager only sets password after reboot on
> Windows 2012 R2
> Hi,
>
> This is specifically for when the VM first starts up. Don't think it is
> specifically a CloudStack pro
Hi,
We confirmed that the IP=password line is in the router at the time of the
machine starting up.
On Tue, Jun 2, 2015 at 10:37 AM, Andrija Panic
wrote:
> "We're building a Windows 2012 template on KVM. It works fine except that
> it
> only sets the password for the VM afte
"We're building a Windows 2012 template on KVM. It works fine except that it
only sets the password for the VM after rebooting it once."
we observed this behaviour with 4.3.1/2 because when you check inside VR,
there is file /var/cache/cloud/passwords that should indicate that
Hi Jeff,
I have seen a similar issue whereby new VMs from Template (Windows 2012 & 2012
R2) do not have their passwords reset upon first time boot. I have not had any
luck in getting it to work. Any advice here is highly appreciated.
Regards,
-Original Message-
From: Jeff
.
Vadim.
-Original Message-
From: Jeff Hair [mailto:j...@greenqloud.com]
Sent: Tuesday, June 02, 2015 1:15 PM
To: users@cloudstack.apache.org
Subject: Re: Cloud Instance Manager only sets password after reboot on Windows
2012 R2
Hi,
This is specifically for when the VM first starts up
I don't see any problems related to CS here.
>
> Vadim.
>
> -Original Message-
> From: Jeff Hair [mailto:j...@greenqloud.com]
> Sent: Tuesday, June 02, 2015 12:57 PM
> To: users@cloudstack.apache.org
> Subject: Cloud Instance Manager only sets password
esday, June 02, 2015 12:57 PM
To: users@cloudstack.apache.org
Subject: Cloud Instance Manager only sets password after reboot on Windows 2012
R2
Hi,
We're building a Windows 2012 template on KVM. It works fine except that it
only sets the password for the VM after rebooting it once. When t
Hi,
We're building a Windows 2012 template on KVM. It works fine except that it
only sets the password for the VM after rebooting it once. When the machine
first starts up, there is garbled output in the Cloud Instance Manager
logs. For example "Added DHCP server: i#x"
Afte
Hi Cloudstack Users,
I'm having some issues where some of the vm's with windows server 2012
2003 when using the console comes up with an error in the browser
saying "Client Communication error, please retry later" , after a few times
then you are able to connect again.
Does anyone have the same i
Hello everybody,
we're trying to deploy instances from a correctly imported Windows 2012
OVA template with no luck, we always receive the following error on the
VCenter: "Invalid configuration for device " .
Is it possible deploying Windows 2012 instances on CS 4.1.1? In
Using KVM.
Ahmad Emneina wrote:
>What hypervisor are you using? I think support for this is being added in
>cloudstack 4.1.
>
>
>On Fri, Apr 5, 2013 at 8:29 PM, Maurice Lawler wrote:
>
>> Greetings,
>>
>> I am attempting to setup an instance with Windows
What hypervisor are you using? I think support for this is being added in
cloudstack 4.1.
On Fri, Apr 5, 2013 at 8:29 PM, Maurice Lawler wrote:
> Greetings,
>
> I am attempting to setup an instance with Windows 2012. However, it seems
> as though Cloud Stack OR my ISO is not seeing
Greetings,
I am attempting to setup an instance with Windows 2012. However, it seems as
though Cloud Stack OR my ISO is not seeing the virtual drive. I have not had
any issues loading two instance of window 2008.
Please advise.
- Maurice
25 matches
Mail list logo
