Hi Hean,
this is a SharedMountPoint option when adding Primary Storage in CloudStack.
This does require that your 2 hosts (not sure you'll be able to do it only
with 2 hosts) have some kind of Clustered Filesystem like clvm, GFS2, OCFS
set up on that mount point /LUN - none of those I would reco
Can you share permissions of your secondary storage (mount it then ls -lah
the mount point)
On Fri, 11 Sep 2020 at 01:39, Ammad Syed wrote:
> Hi Andrija,
>
> I have performed an upgrade on my production system from 4.11.3 to 4.13.1.
> Even I cleared the tags but the issue is still there.
>
> I h
I would say "good luck" and "see you again here" :)
best,
On Mon, 7 Sep 2020 at 20:07, Hean Seng wrote:
> If you have issue setting up Cloudstack 4.14, can consider using the
> Primate Interface . i have issue on old interface too, but seems
> running fine on Primate.
>
> On Mon, Sep 7,
Hi hean,
yes, that is correct, VXLAN is supported (as an isolation method) for only
GUEST traffic/networks.
Make sure to read the manually fully - pay attention to MTU size and the
max number of multicast groups (defaults to 20 on a Linux hosts) -
otherwise, you will experience a serious pain of p
I'm not sure that I have got all your points (after a very quick read), but
I can advise on the following:
" But Cloudstack complaints if I try to create 2 public networks on the
same zone"
This is only true of they are overlapping - or having the same gateway, etc.
Make sure to have each Public
Hi
Yes, I saw that also, Thanks for advice.
On Fri, Sep 11, 2020 at 9:13 PM Andrija Panic
wrote:
> Hi hean,
>
> yes, that is correct, VXLAN is supported (as an isolation method) for only
> GUEST traffic/networks.
> Make sure to read the manually fully - pay attention to MTU size and the
Hi
I understand the convenience of NFS, however in NFS, filesystem is at
Storage end, and the CPU , RAM performance of Storage become very very
important . The Overload may happen on storage rather
compute/hybervisor.
Where as iscsi based sharedmountpoint might have more efficiency for this.
On 9/10/20 9:29 AM, David Jumani wrote:
> Glad to hear it!
>
> The reason for the next error could be when bridges are not configured on the
> host. Could you check the bridge config as mentioned here :
> http://docs.cloudstack.apache.org/projects/cloudstack-installation/en/4.11/hypervisor/kvm.
Sorry Andrija,
I did not explain it correctly. I was trying to create 2 public physical
adapters so that I could create 2 different network offerings one for each.
My use case is being able to select "type" of public IP address.
Imagine creating an Isolated network been able to select:
Isolated
May be you mis-understand of this.
The isolatedetnetwork you mention is on LocalIsolated network (guess
network) , not the public IP . There is no classify on public IP.
If you need to differentiate the services by Public IP , but not Guest
Nework , You may need to setup different zone, Cause
Hi Joshua,
Could you try setting the following Global setting value
ca.plugin.root.auth.strictness to false and restart the services.
Thanks,
Pearl
From: Joshua Schaeffer
Sent: Friday, September 11, 2020 8:24 PM
To: users@cloudstack.apache.org
Subject: Re: Unab
On 9/11/20 9:49 AM, Pearl d'Silva wrote:
> Hi Joshua,
>
> Could you try setting the following Global setting value
> ca.plugin.root.auth.strictness to false and restart the services.
>
> Thanks,
> Pearl
>
>
Thanks for everyone's help, I was able to the host after c
Thanks your reply.
I guess I have to experiment more with different possibilities.
Rafael
On Fri, 2020-09-11 05:43 PM, Hean Seng wrote:
>
May be you mis-understand of this.
>
The isolatedetnetwork you mention is on LocalIsolated network (guess network) ,
not the public IP . There is no cla
I installed CloudStack Primate on my controller nodes and was able to access
the web interface at /client/primate until I restarted the
cloudstack-management service. Now I just get a 404 error. I can still access
the old UI. This is what I see when I try to access the page:
HTTP ERROR 404 Not
14 matches
Mail list logo
