Hii,
You won't be able to manage hypervisor directly from ACS. vCenter server is
must.!
Sent from BlueMail
On 10 May 2020, 20:15, at 20:15, Fariborz Navidan wrote:
>Hello, All.
>
>Is cloudstack 13.1.0.0 capable of directly managing VMware ESXi 6.7
>host
>without Center Server?
>
>Thanks
i.e 192.168.0.20. Make sure NIC3 are
connected to the same network as your storage does.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This message is intended only for the use of
Have you checked the management logs, Sometime router goes in read-only file
system, So in log it says - unable to apply dhcp entry on router and file
system in read-only mode ( something like this ). If this is the case then you
won’t be able to provision any new VMs.
Vivek Kumar
Manager
services it has written the data till 3rd feb
2020 so far). So is there any way to skip this and start populating the latest
Data because in this speed I guess it will take 1-2 month or more then that to
populate the whole data.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O
) .
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This message is intended only for the use of the individual or entity to which
it is addressed and may contain information that is confident
wont be able to access your ACS and
resources from outside of private infra), Make sure that internet works on the
IP range which you assign as public IP range in CloudStack because it downloads
few things from internet i.e Default CentOS template.
Vivek Kumar
Manager - Cloud & De
secondary storage VM where you can find the
reason.
Regards
Vivek Kumar
Sent from BlueMail
On 20 Jul 2020, 20:45, at 20:45, "Corey, Mike" wrote:
>Hi,
>
>I receive error "No route to host (Host unreachable)" on the CentOS
>5.3(64-bit) no GUI (vSphere) templ
r to
check if it is running on successfully on boot or not.
4- I am assuming that you have already enabled the password box in your
templates and cloud-init installed on you template.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 750346009
which you added for VMWare Zone.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This message is intended only for the use of the individual or entity to which
it is addressed and m
That won’t help because it fetch the password from router . Can you just run
“dhclient” and check the lease folder wether you are getting lease file
generated or not.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com &
-p 3922 root@169.254.0.121
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This message is intended only for the use of the individual or entity to which
it is addressed and may conta
Pardon, the whole mail chain was not visible so replied accordingly. It seems
like you are doing SSH using root shell so it doesn’t matter.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/
almachine name=x, …..,
userdata=IyEgL2Jpbi9iYXNoCgplY2hvIOKAnEhlbGxvIENsb3VkU3RhY2vigJ0gPj4gL3RtcC91c2VyZGF0YS50eHQK
I hope this will clarify your concern.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiq
n’t work for me. Is there anything else I need to take care ?
Can someone help how to re-register the systemVM template again.
Vivek Kumar
Hey Andrija
You are such a gem..! Thanks a lot, it worked. So I had missed to change the
state( from User to ’SYSTEM' in DB ).
Vivek Kumar
This message is intended only for the use of the individual or entity to which
it is addressed and may contain information that is confidential a
load balancer”.
VPC VR uses HAproxy for Load balancing which supports SSL offload. Can anyone
clarify this ?
Vivek Kumar
Thanks Andrija,
Vivek Kumar
> On 08-Oct-2020, at 3:58 PM, Andrija Panic wrote:
>
> Hi Vivek,
>
> in 4.13/4.14 (and before..) SSL LB support is there for Netscaler only,
> definitively no support for SSL in HaProxy in those versions. Wei has
> started a PR (not sure
:49:28,540 DEBUG [c.c.a.ApiServlet] (qtp909295153-19:ctx-92e9fcb9
ctx-bfc647e7) (logid:f752b482) ===END=== 10.212.0.27 -- GET
command=listNetworks&response=json&listAll=true&page=1&pagesize=20&_=1603779482163
Vivek Kumar
u| 7 | NULL|
| StorageNetworkGuru| 7 | NULL|
| DirectPodBasedNetworkGuru | 7 | NULL|
Vivek Kumar
> On 27-Oct-2020, at 5:12 PM, Nicolas Vazquez
> wrote:
>
> Hi Vivek,
>
> I took a q
ULL|
+---++-+
Vivek Kumar
> On 28-Oct-2020, at 9:54 AM, Nicolas Vazquez
> wrote:
>
> Thanks Vivek,
>
> The data_center_id is being used to query for not removed datacenters/zones
> by ID. Are any o
Hi Hoang,
Welcome to the CloudStack community..!!
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This message is intended only for the use of the individual or entity to which
it is
. If your offerings doesn’t have any network rate
defined, then it will use what you have defined in your global settings.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This message i
Make sure that you guest VLAN range is allowed in switch port what you are
using to pass the guest traffic.
Regards
Vivek Kumar
Sent from BlueMail
On 30 Nov 2020, 13:24, at 13:24, Hean Seng wrote:
>IP assignment is via DHCP , you need to make sure in the same VLAN,
>there is no
while deploying the virtual
machine, However we can create tag by calling createTags api, but I am
exploring if we can create custom tags while deploying VM.
Regards
Vivek Kumar
just wanted to explore the option field in deployVirtualmachine API, if you
look on the deployVirtualmachine API, you will see a parameters called -
“Details” - what’s the use of details and how can we use that ?
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055
Thanks Guys,
Do we have any kind of document where I can see that what all options are there
which can be passed in details.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This
You can check the logs from systemVM/Management Server. You will get idea why
your agent state is not coming up.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This message is intende
? is it worth using it or not
What we have observed so far that adding Shared LUN on KVMs hosts via PCS
cluster is very complex and messy and it requires so hell lot of configuration
while adding a simple LUN on KVM hosts. Do we other atlernatives if we have
only ISCSi as primary storage.
Vivek
Hey Heince,
Thanks for the response. What do you use in such case ? I mean with KVM and
ISCSi with CloudStack.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This message is intended on
Hello Guys,
Can we do storage live migration on KVM environment ? In ACS, it’s giving the
option only after shutting down the VM.
Vivek Kumar
Well..! I have two different kind of storage, 1st is shared mount point and 2nd
is NFS.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This message is intended only for the use of the
letting me to
online, Once I shutdown my VM it lets me migrate the disk from one primary
storage to another.
Vivek Kumar
> On 09-Jan-2021, at 12:00 AM, Hean Seng wrote:
>
> It work on NFS.
>
> For Share Mount point, I guess you need to decide what file system to use
> .
Hey Adrian,
You can achieve this via storage tags. So let’s say you have 2 storage pool i.e
SSD and HDD, you can define the tags on storage pool and based on that you can
create compute offering and disk offering where you can assign the same storage
tag.
Vivek Kumar
Manager - Cloud
ur ACS.
For you second Question - You can add any NFS directly.There are no
prerequisites (that Secondary storage should be reachable from you POD and
Management range)
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus
, and the handle
parameter echoes the bad value given.
Any idea on above Error.?
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This message is intended only for the use of the individual
Yes, I tried with all options, with cleanup, tried to provision fresh as well.
But the issue is my hosts are not coming UP, It’s showing down for some reason.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com &
Hey Andrija,
It worked. Now after clearing the below params from XenServer host and
restarting the management services, it has copied all directory and plugins to
XenServer hosts and now all XenServer hosts are showing in “UP” State. Thanks
for the help.
Vivek Kumar
Manager - Cloud & De
Make sure that your public IP range is accessible from your system where
you trying to get console.! Also state should be UP for both system VM.
On Mon, 15 Mar, 2021, 17:08 Nazmul Parvej,
wrote:
> Hello Everyone,
>
> I Can't get Instance Console and System VM's Console access But System VM
> (C
Hello Bram,
ISCSi on KVM is painful, you end setting up, PCS cluster on KVM hosts and
then add into your cloudstack as a primary storage. So if you have enough good
resources to manage KVM hosts with PCS or clustered file system the you can go
with it. But trust me if you can get rid of ISCS
available host.
Regards
Vivek Kumar
Manager - Cloud & DevOps
> On 07-Apr-2021, at 6:42 PM, Дикевич Евгений Александрович
> wrote:
>
> Thx Wido for explaining about IPv6. Now MB someone can help me with HA in
> XCP-NG + ACS?
>
> -Original Message-
&
uot;, in global setting I configured ha.tag = HA, on hosts
> I placed tag HA. When I shutdown host (via IPMI) I see in XCP-NG Center than
> VMs goes down, in ACS WEB UI VMs still in status running but I can't connect
> them via console. VMs didn't migrate.
> I have 4 hosts.
>
When your host goes down, it takes sometime to trigger the HA on VMs, you can
check logs for further investigations
> On 08-Apr-2021, at 12:12 PM, Vivek Kumar wrote:
>
> What is the status of hosts, are rest of the hosts are showing in “UP” state
> in ACS GUI?
>
>> On
showing me 10G speed under
the OS.
But how do we resolve in case of KVM. It’s showing me 1G instead of 10G inside
the instance. Can someone help me out If we need to install something or taken
care on KVM.
Regards
Vivek Kumar
Hello Wido,
Yeah it got resolved, so by default KVM VM were picking E1000 adaptor and
because of this, VMs were showing 1G speed. So I have changed VM setting and
add parameters - nicAdaptor -> virtio - And after that it has started showing
me 10G.
Regards
Vivek Kumar
> On 24-Ma
have any issues but is there
any way to provision router in specific cluster as well.
Storage tag and host tag doesn’t work in case of VR’s offering.
Regards
Vivek Kumar
Hey Andrija,
Is there any setting in global setting where we define that VR should go to
any particular cluster, as you mentioned in previous thread. I know there is no
as such performance or functionality issue just curious to know.
Regards,
Vivek Kumar
> On 28-May-2021, at 4:45
t; Regards,
>> Harikrishna
>>
>> Harikrishna Patnala
>> Software Engineer
>> harikrishna.patn...@shapeblue.com
>> www.shapeblue.com
>>
>>
>>
>>
>>
>>
>> --
>> *From:* Vivek Kumar
>> *Sent:* Friday, May 28, 2021 6:19 PM
>> *To
Hey,
From where you are trying to download the template ? Locally or from internet ?
If you are trying to download template from your local internet then first you
need to allowed the CIDR in global setting -
(secstorage.allowed.internal.sites).
Regards,
Vivek Kumar
> On 23-Jun-2021, a
Hello,
What is your mysql-connector-java version ? < rpm -qa | grep
"mysql-connector-java” >, if it is 8 then you need to downgrade to 5.x.
Regards,
Vivek Kumar
> On 02-Jul-2021, at 3:37 PM, pradeep pal wrote:
>
> Hi,
>
> I have installed new CloudStack 4.1
What is the current version ?
On Fri, 2 Jul, 2021, 18:53 pradeep pal, wrote:
> Hello,
>
> i have already tried this, but didn't get any success.
>
> Thanks
> Pradeep
>
> Get Outlook for iOS<https://aka.ms/o0ukef>
> ________
>
I did the same way a long back..! If you are using any self signed certificate
for testing or something.!
> On 05-Jul-2021, at 1:15 PM, Abishek Budhathoki wrote:
>
> If it may help,
> Please open the ssvm public IP https://192.41.41.161/ in the new tab of the
> running browser and accept th
this
expunge.delay ?
Regards,
Vivek Kumar
expunge
thread will run.
So it will be deleted in 48 hours ..! correct ?
Regards,
Vivek Kumar
> On 08-Jul-2021, at 4:48 PM, Yordan Kostov wrote:
>
> Hi Vivek,
>
> Expunge delay - means after what time the VM will be qualified to be
> deleted. If you set this value
Thanks mate.! 😊
> On 08-Jul-2021, at 5:05 PM, Yordan Kostov wrote:
>
> You got that right.
> Expunge process for that VM will be done in the time range from 24 to 48
> hours depending on when the thread runs.
>
> Regards,
> Jordan
>
> -Original Message
Yes, it looks like some permission issue from NFS side, just try to mount
manually from the host and see.
Regards,
Vivek Kumar
> On 08-Jul-2021, at 5:59 PM, Daniel Augusto Veronezi Salvador
> wrote:
>
> Hello John,
>
>
> This mount is done by the SSVM. Does the SSVM
Hello Abhishesk,
Is "dynamically scalable" selected in your template ? Try to disable it and
then try to provision with higher number of CPU and see.
Regards,
Vivek Kumar
> On 18-Jul-2021, at 1:30 PM, Abishek wrote:
>
> Hello everyone,
>
> I am facing trouble in
Hello,
You should probably look management-server.log, it will give you more clarity
why it’s is failing.
Regards,
Vivek Kumar
> On 19-Jul-2021, at 4:32 PM, Poco Loco wrote:
>
> Hello everyone - I am experiencing a weird issue with my Cloudstack install
> v4.15, the Primary sto
.
cluster.cpu.allocated.capacity.disablethreshold
cluster.cpu.allocated.capacity.notificationthreshold
cluster.memory.allocated.capacity.disablethreshold
cluster.memory.allocated.capacity.notificationthreshold
Regards,
Vivek Kumar
> On 25-Jul-2021, at 12:16 PM, Abishek wrote:
>
> Hello Every One,
>
>
( most of the time in case of hardware
failure, host usually go down if host continues to run the CS may not restart
or migrate the VM, so it’s better to set alerts on hardware failure, so that
you move your workload before host goes down ).
Regards,
Vivek Kumar
> On 25-Jul-2021, at 10:53
ven while using different network rates, should there be consistency
across different NICs of user VMs? Currently, compute offering and global
setting only affects the default NIC of the user VMs.
Ans- As I said, it create separate port group as per the network rate and
VLAN.
Regards
Vivek Kumar
478f&response=json&_=1628778877473
Can someone help me in the right direction ?
Vivek Kumar
Sr. Manager - Cloud & DevOps
IndiQus Technologies
M +91 7503460090
www.indiqus.com
Hey Guys,
Any help on this will be highly appreciated.! Please help if anyone ever came
across the below issue.
Vivek Kumar
Sr. Manager - Cloud & DevOps
IndiQus Technologies
M +91 7503460090
www.indiqus.com
> On 13-Aug-2021, at 12:26 AM, Vivek Kumar wrote:
>
> Hello Guy
Hey guys..!
I am so sorry for multiple followup..! But If anyone has any idea how to
address below mentioned issue.! Please help me out.!
Vivek Kumar
Sr. Manager - Cloud & DevOps
IndiQus Technologies
M +91 7503460090
www.indiqus.com
> On 13-Aug-2021, at 2:55 PM, Vivek Kumar
user_ip_address tables, but due to the date in removed row it was not able
get the list of IPs and it was throwing the “java.lang.NullPointerException".
So we removed the date from removed row and it has started working.
Vivek Kumar
Sr. Manager - Cloud & DevOps
IndiQus Technolog
Password for cloud user is weak...! Set some complex password for cloud
user ..! If you see the error it's clearly saying that your password
doesn't satisfying the current policy.!
On Sun, 29 Aug, 2021, 21:43 technologyrss.mail, <
technologyrss.m...@gmail.com> wrote:
> Thanks for your reply.
>
Yes, you can create Advance Zone without having any actual public IP range. You
can use your exiting LAN range and setup CloudStack. Then obviously you can
only access from that network only. ( I hope this is for testing purpose or
in-house deployment )
Vivek Kumar
Sr. Manager - Cloud
.
Vivek Kumar
Sr. Manager - Cloud & DevOps
IndiQus Technologies
M +91 7503460090
www.indiqus.com
> On 19-Sep-2021, at 8:12 PM, Saurabh Rapatwar
> wrote:
>
> Hello
>
> We are using CloudStack to sell Public Cloud. For this purpose we want to
> customise the tem
Did you configure LVM or standard partition on your / partition while creating
the template. ? You also should not have any other partition after the /
partition. I,e swap or any other.
Vivek Kumar
Sr. Manager - Cloud & DevOps
IndiQus Technologies
M +91 7503460090
www.indiqus.com
seconds) to wait before
running the storage cleanup thread.Advanced
86400
Vivek Kumar
Sr. Manager - Cloud & DevOps
IndiQus Technologies
M +91 7503460090
www.indiqus.com
> On 21-Oct-2021, at 4:38 PM, Yordan Kostov wrote:
>
> Here is another thing I noticed.
>
).
Vivek Kumar
Sr. Manager - Cloud & DevOps
IndiQus Technologies
M +91 7503460090
www.indiqus.com
> On 23-Oct-2021, at 2:27 AM, Ranjit Jadhav wrote:
>
> Thanks for getting back to me. At the ACS level network is configured fine
> but at the OS level, it does not get updated. B
better
then KVM and very easy to manage.
Vivek Kumar
Sr. Manager - Cloud & DevOps
IndiQus Technologies
M +91 7503460090
www.indiqus.com
> On 29-Oct-2021, at 1:14 PM, Hean Seng wrote:
>
> For primitive way for NFS HA, you can consider is just using DRDB .
>
>
Hii,
So in advance zone you can create either isolated network or VPC style isolated
network.!! Just go the network tab add an isolated network with your private
subnet or you can select VPC in the drop down option.
Sent from BlueMail
On 16 Oct 2019, 03:06, at 03:06, Fariborz Navidan wrote
Done. 27 more to go..!
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This message is intended only for the use of the individual or entity to which
it is addressed and may contain i
Hello Mates..!!
Can anyone provide me the any password hash from the ACS DB for any user. Just
send me the Actual password and it’s hash from DB.
It’s just for testing purpose, otherwise I have to Setup ACS separately just
for this.
i.e Select * from user where username = ’XYZ’;
Vivek
where your VM is
running and then try to restart the network services of VM.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This message is intended only for the use of the individual or entit
Hello Mark,
What hypervisor are you using ?
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This message is intended only for the use of the individual or entity to which
it is address
-4.11.3-kvm.qcow2.bz2
<http://download.cloudstack.org/systemvm/4.11/systemvmtemplate-4.11.3-kvm.qcow2.bz2>
-h kvm -s -F
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This message
provision the instance.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This message is intended only for the use of the individual or entity to which
it is addressed and may contain inform
. What do you see ? There
should be your management IP, can you verify that ?
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This message is intended only for the use of the individual or
Dont you have GUI installed on your KVM host where you can take the console of
your system VMs via virt-viewer. It’s good practice part of troubleshooting
purpose if you have GUI installed on KVM host if your SSH doesn’t work somehow
to the system VM.
Vivek Kumar
Manager - Cloud & De
No but it helps as part of troubleshooting specially on KVM hosts. Because
other hypervisor i.e Xenserver and VMware you can view the console without
doing the SSH.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com &
I am assuming that you are performing the SSH to the system VMs from the host
where system VM are running ? It’s only accessible from the host where your
system VMs running, it can’t be connected from other hosts
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11
If it is asking password when for virt-viewer ? Then run
# virsh list
Find the name then run
# virsh edit ( It will show the VNC password but make sure you don’t
change anything ).
Then use this password for view the console of your machine.
Vivek Kumar
Manager - Cloud & De
Hello,
Can you verify the mysql db host entry in db.properties file. It’s under
/etc/cloudstack/manaement. You can also check the mysql connector version - i.e
"mysql-connector-java" and "mysql-connector-python”.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
Hello,
Just verify the Management server IP in agent.properties file on your KVM host
and try to restart the Cloudstack-agent service on your KVM host. You can also
try to downgrade mysql-connector-python which is also probably got upgraded
when you updated the whole system.
Vivek Kumar
the VM has some QoS limit. You
can check that.
Vivek Kumar
Manager - Cloud & DevOps
IndiQus Technologies
24*7 O +91 11 4055 1411 | M +91 7503460090
www.indiqus.com <http://indiqus.com/>
This message is intended only for the use of the individual or entity to which
it is address
running on the same
SR should also get affected. Has anyone came across with this issue ?
So every-time i need to reboot the VR in order to fix the file system which
obviously leads some downtime.
Regards
Vivek Kumar
.
Vivek Kumar
pfsense it will always identified as a private IP.
Vivek Kumar
This message is intended only for the use of the individual or entity to which
it is addressed and may contain information that is confidential and/or
privileged. If you are not the intended recipient please delete the original
host. Since it will
be a cluster movement so it will take time to migrate whole storage to
secondary cluster.
I will suggest you to perform this on a test vm before any live VMs. Make sure
that you secondary storage has enough capacity .
Vivek Kumar
Manager - Cloud & DevOps
Ind
Was it vm's snapshot or disk snapshot ?
Get Outlook for Android
On Tue, Sep 13, 2016 at 7:08 PM +0530, "Jānis Andersons | Failiem.lv"
wrote:
Hi!
I was wondering where cloudstack stores it's snapshots?
I created two snapshots couple days ago but secondary storage is empty.
Als
nis Andersons | Failiem.lv" <
> j...@failiem.lv> wrote:
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Hi!
> > I was wondering where cloudstack stores it's snapshots?
> > I created two snapshots couple days ag
Vm's snapshot goes into primary storage and disk snapshot goes into secondary
storage.
Get Outlook for Android
On Tue, Sep 13, 2016 at 7:47 PM +0530, "Simon Weller" wrote:
What hypervisor are you using?
From: Janis Andersons | Failiem.lv
Sent:
Hello Zainal,
There are two type of snapshot ,
1- VM's snapshot
2- disk snapshot
and yes you can take either VM's snapshot or disk snapshot from running vm's
*Vivek Kumar*
Virtualization and Cloud Consultant
[image: http://www.indiqus.com/images/logo.jpg] <http://www.indi
this link will help you.
https://cwiki.apache.org/confluence/display/CLOUDSTACK/VM+Snapshots
On Tue, Sep 20, 2016 at 8:56 AM, Mohd Zainal Abidin Rabani <
zai...@nocser.net> wrote:
> How to do VM’s snapshot?
>
>
>
> From: Vivek Kumar [mailto:vivek.ku...@indiqus.com]
>
yes you can take it without shutting down the vm
On Tue, Sep 20, 2016 at 9:06 AM, Mohd Zainal Abidin Rabani <
zai...@nocser.net> wrote:
> From the link I saw need to stop VM’s. Is it possible to snapshot while
> VM’s still running??
>
>
>
> From: Vivek Kumar [mailto
at 9:06 AM, Mohd Zainal Abidin Rabani <
> zai...@nocser.net <mailto:zai...@nocser.net> > wrote:
>
> From the link I saw need to stop VM’s. Is it possible to snapshot while
> VM’s still running??
>
>
>
> From: Vivek Kumar [mailto:vivek.ku...@indiqus.com vivek.ku.
oudstack ver 4.8.0.1.
From: Vivek Kumar [mailto:vivek.ku...@indiqus.com]
Sent: Tuesday, September 20, 2016 11:50 AM
To: users@cloudstack.apache.org
Subject: Re: How to: Snapshot
No there is no icon , what hyperviser and cloud stack version are you using now
?
On Tue, Sep 20, 2016 at 9:14 AM
/etc/sysctl.conf on xenserver
net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 0
net.bridge.bridge-nf-call-arptables = 1
and run this command
# sysctl -p /etc/sysctl.conf
I hope this will work.
*Vivek Kumar*
Virtualization and Cloud Consultant
[image: http
s done "by the book".
> CheersJK
>
>
> Von meinem Samsung Galaxy Smartphone gesendet.
>
> ---- Ursprüngliche Nachricht
> Von: Vivek Kumar
> Datum: 22.09.2016 08:14 (GMT+01:00) An:
> users@cloudstack.apache.org, jeroen.ke...@keerl-it.com
> Bet
1 - 100 of 222 matches
Mail list logo
