Hi All,
I am trying to build application-specific 2-node failover cluster using ubuntu 22, pacemaker 2.1.2 + corosync 3.1.6 and DRBD 9.2.9, knet transport. For some reason I can't use 3-node then I have to use qnetd+qdevice 3.0.1. The main goal Is to protect custom app which is not cluster-aware by itself. It is quite stateful, can't store the state outside memory and take some time to get converged with other parts of the system, then the best scenario is "failover is a restart with same config", but each unnecessary restart is painful. So, if failover done, app must retain on the backup node until it fail or admin push it back, this work well with stickiness param. So, the goal is to detect serving node fail ASAP and restart it ASAP on other node, using DRBD-synced config/data. ASAP means within 5-7 sec, not 30 or more. I was tried different combinations of timing, and finally got acceptable result within 5 sec for the best case. But! The case is very unstable. My setup is a simple: two nodes on VM, and one more VM as arbiter (qnetd), VMs under Proxmox and connected by net via external ethernet switch to get closer to reality where "nodes VM" should locate as VM on different PHY hosts in one rack. Then, it was adjusted for faster detect and failover. 1. In Corosync, left the token default 1000ms, but add "heartbeat_failures_allowed: 3", this made corosync catch node failure for about 200ms (4x50ms heartbeat). 2. Both qnet and qdevice was run with net_heartbeat_interval_min=200 to allow play with faster hearbeats and detects 3. Also, quorum.device.net has timeout: 500, sync_timeout: 3000, algo: LMS. The testing is to issue "ate +%M:%S.%N && qm stop 201", and then check the logs on timestamp when the app started on the "backup" host. And, when backup host boot again, the test is to check the logs for the app was not restarted. Sometimes switchover work like a charm but sometimes it may delay for dozens of seconds. Sometimes when the primary host boot up again, secondary hold quorum well and keep app running, sometimes quorum is lost first (and pacemaker downs the app) and then found and pacemaker get app up again, so unwanted restart happen. My investigation shows that the difference between "good" and "bad" cases: Good case - all the logs clear and reasonable. Bad case: qnetd losing connection to second node just after the connection to "failure" node detected and then it may take dozens of seconds to restore it. All this time qdevice trying to connect qnetd and fails: Example, host 192.168.100.1 send to failure, 100.2 is failover to: >From qnetd: May 01 23:30:39 arbiter corosync-qnetd[6338]: Client ::ffff:192.168.100.1:60686 doesn't sent any message during 600ms. Disconnecting May 01 23:30:39 arbiter corosync-qnetd[6338]: Client ::ffff:192.168.100.1:60686 (init_received 1, cluster bsc-test-cluster, node_id 1) disconnect May 01 23:30:39 arbiter corosync-qnetd[6338]: algo-lms: Client 0x55a6fc6785b0 (cluster bsc-test-cluster, node_id 1) disconnect May 01 23:30:39 arbiter corosync-qnetd[6338]: algo-lms: server going down 0 >>> This is unexpected down, at normal scenario connection persist May 01 23:30:40 arbiter corosync-qnetd[6338]: Client ::ffff:192.168.100.2:32790 doesn't sent any message during 600ms. Disconnecting May 01 23:30:40 arbiter corosync-qnetd[6338]: Client ::ffff:192.168.100.2:32790 (init_received 1, cluster bsc-test-cluster, node_id 2) disconnect May 01 23:30:40 arbiter corosync-qnetd[6338]: algo-lms: Client 0x55a6fc6363d0 (cluster bsc-test-cluster, node_id 2) disconnect May 01 23:30:40 arbiter corosync-qnetd[6338]: algo-lms: server going down 0 May 01 23:30:56 arbiter corosync-qnetd[6338]: New client connected May 01 23:30:56 arbiter corosync-qnetd[6338]: cluster name = bsc-test-cluster May 01 23:30:56 arbiter corosync-qnetd[6338]: tls started = 0 May 01 23:30:56 arbiter corosync-qnetd[6338]: tls peer certificate verified = 0 May 01 23:30:56 arbiter corosync-qnetd[6338]: node_id = 2 May 01 23:30:56 arbiter corosync-qnetd[6338]: pointer = 0x55a6fc6363d0 May 01 23:30:56 arbiter corosync-qnetd[6338]: addr_str = ::ffff:192.168.100.2:57736 May 01 23:30:56 arbiter corosync-qnetd[6338]: ring id = (2.801) May 01 23:30:56 arbiter corosync-qnetd[6338]: cluster dump: May 01 23:30:56 arbiter corosync-qnetd[6338]: client = ::ffff:192.168.100.2:57736, node_id = 2 May 01 23:30:56 arbiter corosync-qnetd[6338]: Client ::ffff:192.168.100.2:57736 (cluster bsc-test-cluster, node_id 2) sent initial node list. May 01 23:30:56 arbiter corosync-qnetd[6338]: msg seq num = 99 May 01 23:30:56 arbiter corosync-qnetd[6338]: Node list: May 01 23:30:56 arbiter corosync-qnetd[6338]: 0 node_id = 1, data_center_id = 0, node_state = not set May 01 23:30:56 arbiter corosync-qnetd[6338]: 1 node_id = 2, data_center_id = 0, node_state = not set May 01 23:30:56 arbiter corosync-qnetd[6338]: algo-lms: cluster bsc-test-cluster config_list has 2 nodes May 01 23:30:56 arbiter corosync-qnetd[6338]: Algorithm result vote is No change May 01 23:30:56 arbiter corosync-qnetd[6338]: Client ::ffff:192.168.100.2:57736 (cluster bsc-test-cluster, node_id 2) sent membership node list. May 01 23:30:56 arbiter corosync-qnetd[6338]: msg seq num = 100 May 01 23:30:56 arbiter corosync-qnetd[6338]: ring id = (2.801) May 01 23:30:56 arbiter corosync-qnetd[6338]: heuristics = Undefined May 01 23:30:56 arbiter corosync-qnetd[6338]: Node list: May 01 23:30:56 arbiter corosync-qnetd[6338]: 0 node_id = 2, data_center_id = 0, node_state = not set May 01 23:30:56 arbiter corosync-qnetd[6338]: May 01 23:30:56 arbiter corosync-qnetd[6338]: algo-lms: membership list from node 2 partition (2.801) May 01 23:30:56 arbiter corosync-qnetd[6338]: algo-util: partition (2.801) (0x55a6fc67e110) has 1 nodes May 01 23:30:56 arbiter corosync-qnetd[6338]: algo-lms: Only 1 partition. This is votequorum's problem, not ours May 01 23:30:56 arbiter corosync-qnetd[6338]: Algorithm result vote is ACK May 01 23:30:56 arbiter corosync-qnetd[6338]: Client ::ffff:192.168.100.2:57736 (cluster bsc-test-cluster, node_id 2) sent quorum node list. May 01 23:30:56 arbiter corosync-qnetd[6338]: msg seq num = 101 May 01 23:30:56 arbiter corosync-qnetd[6338]: quorate = 0 May 01 23:30:56 arbiter corosync-qnetd[6338]: Node list: May 01 23:30:56 arbiter corosync-qnetd[6338]: 0 node_id = 1, data_center_id = 0, node_state = dead May 01 23:30:56 arbiter corosync-qnetd[6338]: 1 node_id = 2, data_center_id = 0, node_state = member May 01 23:30:56 arbiter corosync-qnetd[6338]: May 01 23:30:56 arbiter corosync-qnetd[6338]: algo-lms: quorum node list from node 2 partition (2.801) May 01 23:30:56 arbiter corosync-qnetd[6338]: algo-util: partition (2.801) (0x55a6fc697e70) has 1 nodes May 01 23:30:56 arbiter corosync-qnetd[6338]: algo-lms: Only 1 partition. This is votequorum's problem, not ours May 01 23:30:56 arbiter corosync-qnetd[6338]: Algorithm result vote is ACK May 01 23:30:56 arbiter corosync-qnetd[6338]: Client ::ffff:192.168.100.2:57736 (cluster bsc-test-cluster, node_id 2) sent quorum node list. May 01 23:30:56 arbiter corosync-qnetd[6338]: msg seq num = 102 May 01 23:30:56 arbiter corosync-qnetd[6338]: quorate = 1 May 01 23:30:56 arbiter corosync-qnetd[6338]: Node list: May 01 23:30:56 arbiter corosync-qnetd[6338]: 0 node_id = 1, data_center_id = 0, node_state = dead May 01 23:30:56 arbiter corosync-qnetd[6338]: 1 node_id = 2, data_center_id = 0, node_state = member May 01 23:30:56 arbiter corosync-qnetd[6338]: May 01 23:30:56 arbiter corosync-qnetd[6338]: algo-lms: quorum node list from node 2 partition (2.801) May 01 23:30:56 arbiter corosync-qnetd[6338]: algo-util: partition (2.801) (0x55a6fc669dc0) has 1 nodes May 01 23:30:56 arbiter corosync-qnetd[6338]: algo-lms: Only 1 partition. This is votequorum's problem, not ours May 01 23:30:56 arbiter corosync-qnetd[6338]: Algorithm result vote is ACK May 01 23:30:58 arbiter corosync-qnetd[6338]: Client closed connection May 01 23:30:58 arbiter corosync-qnetd[6338]: Client ::ffff:192.168.100.2:57674 (init_received 0, cluster bsc-test-cluster, node_id 0) disconnect >> At this point resource start on backup host >From qdevice: May 01 23:30:40 node2 corosync-qdevice[781]: Server closed connection May 01 23:30:40 node2 corosync-qdevice[781]: algo-lms: disconnected. quorate = 1, WFA = 0 May 01 23:30:40 node2 corosync-qdevice[781]: algo-lms: disconnected. reason = 22, WFA = 0 May 01 23:30:40 node2 corosync-qdevice[781]: Algorithm result vote is NACK May 01 23:30:40 node2 corosync-qdevice[781]: Cast vote timer remains scheduled every 250ms voting NACK. May 01 23:30:40 node2 corosync-qdevice[781]: Sleeping for 161 ms before reconnect May 01 23:30:40 node2 corosync-qdevice[781]: Trying connect to qnetd server arbiter:5403 (timeout = 400ms) May 01 23:30:41 node2 corosync-qdevice[781]: Connect timeout May 01 23:30:41 node2 corosync-qdevice[781]: algo-lms: disconnected. quorate = 1, WFA = 0 May 01 23:30:41 node2 corosync-qdevice[781]: algo-lms: disconnected. reason = 27, WFA = 0 May 01 23:30:41 node2 corosync-qdevice[781]: Algorithm result vote is NACK May 01 23:30:41 node2 corosync-qdevice[781]: Cast vote timer remains scheduled every 250ms voting NACK. May 01 23:30:41 node2 corosync-qdevice[781]: Trying connect to qnetd server arbiter:5403 (timeout = 400ms) May 01 23:30:41 node2 corosync-qdevice[781]: Votequorum nodelist notify callback: May 01 23:30:41 node2 corosync-qdevice[781]: Ring_id = (2.801) May 01 23:30:41 node2 corosync-qdevice[781]: Node list (size = 1): May 01 23:30:41 node2 corosync-qdevice[781]: 0 nodeid = 2 May 01 23:30:41 node2 corosync-qdevice[781]: Algorithm decided to pause cast vote timer and result vote is No change May 01 23:30:41 node2 corosync-qdevice[781]: Cast vote timer is now paused. May 01 23:30:41 node2 corosync-qdevice[781]: worker: qdevice_heuristics_worker_cmd_process_exec: Received exec command with seq_no "24" and timeout "1500" May 01 23:30:41 node2 corosync-qdevice[781]: Received heuristics exec result command with seq_no "24" and result "Disabled" May 01 23:30:41 node2 corosync-qdevice[781]: Votequorum heuristics exec result callback: May 01 23:30:41 node2 corosync-qdevice[781]: seq_number = 24, exec_result = Disabled May 01 23:30:41 node2 corosync-qdevice[781]: Algorithm decided to not send list, result vote is No change and heuristics is Undefined May 01 23:30:41 node2 corosync-qdevice[781]: Cast vote timer is no longer paused. May 01 23:30:41 node2 corosync-qdevice[781]: Not scheduling heuristics timer because mode is not enabled May 01 23:30:41 node2 corosync-qdevice[781]: Votequorum quorum notify callback: May 01 23:30:41 node2 corosync-qdevice[781]: Quorate = 0 May 01 23:30:41 node2 corosync-qdevice[781]: Node list (size = 3): May 01 23:30:41 node2 corosync-qdevice[781]: 0 nodeid = 1, state = 2 May 01 23:30:41 node2 corosync-qdevice[781]: 1 nodeid = 2, state = 1 May 01 23:30:41 node2 corosync-qdevice[781]: 2 nodeid = 0, state = 0 May 01 23:30:41 node2 corosync-qdevice[781]: algo-lms: quorum_notify. quorate = 0 May 01 23:30:41 node2 corosync-qdevice[781]: Algorithm decided to not send list and result vote is No change May 01 23:30:41 node2 corosync-qdevice[781]: Connect timeout May 01 23:30:41 node2 corosync-qdevice[781]: algo-lms: disconnected. quorate = 0, WFA = 0 May 01 23:30:41 node2 corosync-qdevice[781]: algo-lms: disconnected. reason = 27, WFA = 0 May 01 23:30:41 node2 corosync-qdevice[781]: Algorithm result vote is NACK May 01 23:30:41 node2 corosync-qdevice[781]: Cast vote timer remains scheduled every 250ms voting NACK. May 01 23:30:41 node2 corosync-qdevice[781]: Trying connect to qnetd server arbiter:5403 (timeout = 400ms) >>> At this point quorum reported lost May 01 23:30:41 node2 corosync-qdevice[781]: Connect timeout May 01 23:30:41 node2 corosync-qdevice[781]: algo-lms: disconnected. quorate = 0, WFA = 0 May 01 23:30:41 node2 corosync-qdevice[781]: algo-lms: disconnected. reason = 27, WFA = 0 May 01 23:30:41 node2 corosync-qdevice[781]: Algorithm result vote is NACK May 01 23:30:41 node2 corosync-qdevice[781]: Cast vote timer remains scheduled every 250ms voting NACK. >>> This failure pattern repeats 31 times May 01 23:30:41 node2 corosync-qdevice[781]: Trying connect to qnetd server arbiter:5403 (timeout = 400ms) May 01 23:30:42 node2 corosync-qdevice[781]: Connect timeout May 01 23:30:42 node2 corosync-qdevice[781]: algo-lms: disconnected. quorate = 0, WFA = 0 May 01 23:30:42 node2 corosync-qdevice[781]: algo-lms: disconnected. reason = 27, WFA = 0 May 01 23:30:42 node2 corosync-qdevice[781]: Algorithm result vote is NACK May 01 23:30:42 node2 corosync-qdevice[781]: Cast vote timer remains scheduled every 250ms voting NACK. >>> End of pattern repeat, continue May 01 23:30:56 node2 corosync-qdevice[781]: Trying connect to qnetd server arbiter:5403 (timeout = 400ms) May 01 23:30:56 node2 corosync-qdevice[781]: Sending preinit msg to qnetd May 01 23:30:56 node2 corosync-qdevice[781]: Received preinit reply msg May 01 23:30:56 node2 corosync-qdevice[781]: Received init reply msg May 01 23:30:56 node2 corosync-qdevice[781]: Scheduling send of heartbeat every 400ms May 01 23:30:56 node2 corosync-qdevice[781]: Executing after-connect heuristics. May 01 23:30:56 node2 corosync-qdevice[781]: worker: qdevice_heuristics_worker_cmd_process_exec: Received exec command with seq_no "25" and timeout "250" May 01 23:30:56 node2 corosync-qdevice[781]: Received heuristics exec result command with seq_no "25" and result "Disabled" May 01 23:30:56 node2 corosync-qdevice[781]: Algorithm decided to send config node list, send membership node list, send quorum node list, heuristics is Undefined and result vote is Wait for reply May 01 23:30:56 node2 corosync-qdevice[781]: Sending set option seq = 98, HB(0) = 0ms, KAP Tie-breaker(1) = Enabled May 01 23:30:56 node2 corosync-qdevice[781]: Sending config node list seq = 99 May 01 23:30:56 node2 corosync-qdevice[781]: Node list: May 01 23:30:56 node2 corosync-qdevice[781]: 0 node_id = 1, data_center_id = 0, node_state = not set May 01 23:30:56 node2 corosync-qdevice[781]: 1 node_id = 2, data_center_id = 0, node_state = not set May 01 23:30:56 node2 corosync-qdevice[781]: Sending membership node list seq = 100, ringid = (2.801), heuristics = Undefined. May 01 23:30:56 node2 corosync-qdevice[781]: Node list: May 01 23:30:56 node2 corosync-qdevice[781]: 0 node_id = 2, data_center_id = 0, node_state = not set May 01 23:30:56 node2 corosync-qdevice[781]: Sending quorum node list seq = 101, quorate = 0 May 01 23:30:56 node2 corosync-qdevice[781]: Node list: May 01 23:30:56 node2 corosync-qdevice[781]: 0 node_id = 1, data_center_id = 0, node_state = dead May 01 23:30:56 node2 corosync-qdevice[781]: 1 node_id = 2, data_center_id = 0, node_state = member May 01 23:30:56 node2 corosync-qdevice[781]: Cast vote timer is now stopped. May 01 23:30:56 node2 corosync-qdevice[781]: Received set option reply seq(1) = 98, HB(0) = 0ms, KAP Tie-breaker(1) = Enabled May 01 23:30:56 node2 corosync-qdevice[781]: Received initial config node list reply May 01 23:30:56 node2 corosync-qdevice[781]: seq = 99 May 01 23:30:56 node2 corosync-qdevice[781]: vote = No change May 01 23:30:56 node2 corosync-qdevice[781]: ring id = (2.801) May 01 23:30:56 node2 corosync-qdevice[781]: Algorithm result vote is No change May 01 23:30:56 node2 corosync-qdevice[781]: Received membership node list reply May 01 23:30:56 node2 corosync-qdevice[781]: seq = 100 May 01 23:30:56 node2 corosync-qdevice[781]: vote = ACK May 01 23:30:56 node2 corosync-qdevice[781]: ring id = (2.801) May 01 23:30:56 node2 corosync-qdevice[781]: Algorithm result vote is ACK May 01 23:30:56 node2 corosync-qdevice[781]: Cast vote timer is now scheduled every 250ms voting ACK. May 01 23:30:56 node2 corosync-qdevice[781]: Received quorum node list reply May 01 23:30:56 node2 corosync-qdevice[781]: seq = 101 May 01 23:30:56 node2 corosync-qdevice[781]: vote = ACK May 01 23:30:56 node2 corosync-qdevice[781]: ring id = (2.801) May 01 23:30:56 node2 corosync-qdevice[781]: Algorithm result vote is ACK May 01 23:30:56 node2 corosync-qdevice[781]: Cast vote timer remains scheduled every 250ms voting ACK. May 01 23:30:56 node2 corosync-qdevice[781]: Votequorum quorum notify callback: May 01 23:30:56 node2 corosync-qdevice[781]: Quorate = 1 May 01 23:30:56 node2 corosync-qdevice[781]: Node list (size = 3): May 01 23:30:56 node2 corosync-qdevice[781]: 0 nodeid = 1, state = 2 May 01 23:30:56 node2 corosync-qdevice[781]: 1 nodeid = 2, state = 1 May 01 23:30:56 node2 corosync-qdevice[781]: 2 nodeid = 0, state = 0 May 01 23:30:56 node2 corosync-qdevice[781]: algo-lms: quorum_notify. quorate = 1 May 01 23:30:56 node2 corosync-qdevice[781]: Algorithm decided to send list and result vote is No change May 01 23:30:56 node2 corosync-qdevice[781]: Sending quorum node list seq = 102, quorate = 1 May 01 23:30:56 node2 corosync-qdevice[781]: Node list: May 01 23:30:56 node2 corosync-qdevice[781]: 0 node_id = 1, data_center_id = 0, node_state = dead May 01 23:30:56 node2 corosync-qdevice[781]: 1 node_id = 2, data_center_id = 0, node_state = member May 01 23:30:56 node2 corosync-qdevice[781]: Received quorum node list reply May 01 23:30:56 node2 corosync-qdevice[781]: seq = 102 May 01 23:30:56 node2 corosync-qdevice[781]: vote = ACK May 01 23:30:56 node2 corosync-qdevice[781]: ring id = (2.801) May 01 23:30:56 node2 corosync-qdevice[781]: Algorithm result vote is ACK May 01 23:30:56 node2 corosync-qdevice[781]: Cast vote timer remains scheduled every 250ms voting ACK. >>> Here everything become OK and resource started on Node2 Also, I've done wireshark capture and found great mess in TCP, it seems like connection between qdevice and qnetd really stops for some time and packets won't deliver. For my guess, it match corosync syncing activities, and I suspect that corosync prevent any other traffic on the interface it use for rings. As I switch qnetd and qdevice to use different interface it seems to work fine. So, the question is: does corosync really temporary blocks any other traffic on the interface it uses? Or it is just a coincidence? If it blocks, is there a way to manage it? Thank you for any suggest on that! Sincerely, Alex
_______________________________________________ Manage your subscription: https://lists.clusterlabs.org/mailman/listinfo/users ClusterLabs home: https://www.clusterlabs.org/
