Sound support for Intel ICH7 rev 02

Hi, I have a problem with my sound chip. It's a Intel ICH7 rev 02. This is, what lspci -v on Linux says: 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02) Subsystem: Lenovo Unknown device 2010 Flags: bus master, fast devsel,

Re: Thinkpad R60: DFly Snapshot install CD doesn't find SATA HD

Am Donnerstag, 23. November 2006 23:17 schrieb walt: Thomas Schlesinger wrote: Am Mittwoch, 22. November 2006 18:48 schrieb Joerg Sonnenberger: On Wed, Nov 22, 2006 at 06:00:45PM +0100, Thomas Schlesinger wrote: yesterday, I've got my shiny new Thinkpad R60, but I'm not able to install

Console message sched_ithd: stray interrupt 7

Hi, I get sometimes the console message sched_ithd: stray interrupt 7 on my notebook with SMP kernel. What does this message mean? Thomas

Re: IDE C in DFly

Am Sonntag, 26. November 2006 13:31 schrieb Saverio Iacovelli: Hi all, I would to know a graphical framework wich I can find in Pkgsrc to develop in C/C++. Qt from Trolltech, for example, is in pkgsrc. GTK(2) is there, too. Thomas

Re: Thinkpad R60: DFly Snapshot install CD doesn't find SATA HD

Am Mittwoch, 22. November 2006 18:47 schrieb walt: Thomas Schlesinger wrote: Hi, yesterday, I've got my shiny new Thinkpad R60, but I'm not able to install DragonFly (snapshot from last night). The installer doesn't find the (SATA) harddisk. FreeBSD 6.2.RC1 and Linux do recognize

Thinkpad R60: DFly Snapshot install CD doesn't find SATA HD

Hi, yesterday, I've got my shiny new Thinkpad R60, but I'm not able to install DragonFly (snapshot from last night). The installer doesn't find the (SATA) harddisk. FreeBSD 6.2.RC1 and Linux do recognize the ICH7 without any problems. I've attached my dmesg output from DragonFlyBSD and

Re: ipw3945 WLAN driver

Johannes Hofmann schrieb: Thomas Schlesinger [EMAIL PROTECTED] wrote: Am Dienstag, 14. November 2006 18:40 schrieb Thomas Schlesinger: Hi, are there plans to port the ipw3945 driver from OpenBSD in the near future? Thomas Ok, I take this as no ;-) Hi Thomas, if you

Re: ipw3945 WLAN driver

Am Dienstag, 14. November 2006 18:40 schrieb Thomas Schlesinger: Hi, are there plans to port the ipw3945 driver from OpenBSD in the near future? Thomas Ok, I take this as no ;-) Thomas

ipw3945 WLAN driver

Hi, are there plans to port the ipw3945 driver from OpenBSD in the near future? Thomas

Sound slowdown on sis7012 hardware

Hi, I have built-in sound (sis7012) on my desktop machine. It sounds to me, that sound files are being played a little bit too slow. The voice of singers and the height of music instruments seems to be to low, compared with playing the same music on the same machine with Linux. I use the

Re: multimedia and desktop

Am Freitag, 10. November 2006 23:28 schrieb walt: Saverio Iacovelli wrote: ... 4) How can I try automatically gkrellm and other tools over Fluxbox in DragonFly? I haven't tried gkrellm on DragonFly, but if it tries to measure things like CPU load, memory usage, network traffic and other

Re: notebook compliant with Dfly 1.6.x

Am Samstag, 14. Oktober 2006 11:47 schrieb Saverio Iacovelli: I want buy a notebook, where I will install also DragonFly. What are the better choice in this matter: 1) there are the trademarks better than other for hardware compatility (Acer or Asus...) Saverio, may be you should have a

Re: notebook compliant with Dfly 1.6.x

Am Samstag, 14. Oktober 2006 14:21 schrieb Saverio Iacovelli: http://chlamydia.fs.ei.tum.de/pub/DragonFly/snapshots/i386/ISO-IMAGES/ What is 1.6.2 release? May be this one: http://chlamydia.fs.ei.tum.de/pub/DragonFly/snapshots/i386/LATEST-Release-1.6.iso.bz2 ? Thomas

Re: Can't start KDE or TWM with KDM

Am Freitag, 6. Oktober 2006 16:30 schrieb Frank Petitjean: snip Does any one know who is the user Cyrus ? and why my root is called root Charly on KDM ? Frank, cyrus is a user account for the application cyrus(-sasl), an IMAP-server you seem to have installed (try pkg_info | grep cyrus).

Re: Can't start KDE or TWM with KDM

Am Dienstag, 3. Oktober 2006 19:38 schrieb Frank Petitjean: Le Mon, 02 Oct 2006 10:12:13 +0200, Frank Petitjean [EMAIL PROTECTED] a écrit: Am additional question about KDM : I installed cups on my computer and it now appears among the user choices at kdm start up. Is it normal ? Yes and

Re: Problem with Xorg conf

Am Donnerstag, 28. September 2006 16:31 schrieb Frank Petitjean: Le Wed, 27 Sep 2006 18:44:04 +0200, Jeremy C. Reed [EMAIL PROTECTED] a écrit: Install more fonts. Configure your system to use your preferred fonts first. Try your KControl font installer. Maybe install Windows True Type

Re: Problem with Xorg conf

Am Mittwoch, 27. September 2006 18:09 schrieb Frank Petitjean: Hi, I am a newbee in the BSD world, and I have problem with Xorg configuration. snip Basicaly I seems that Xorg works when I use it along with KDE, but on some web sites like freedesktop.org some fonts are not displayed

DRI with ATI graphics chip

Hi, I've seen, there's a drm module in the source code. I use an ATI Mobility X600 PCIe chip in my notebook. I've loaded the radeon.ko module and have an empty directory /dev/dri, but the Xorg.0.log tells me: [..] drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1,

Re: DRI with ATI graphics chip

Am Montag, 25. September 2006 23:57 schrieb Tiv: snip Hi there Thomas --- Sorry, but to my understanding, anything ATI newer than Radeon 9200 series (Rv280) does not have the native kernel level support for DRI/DRM under Xorg running on any BSD or linux. Ok, I've thought the free

Re: pthread-changes from 1.6 to 1.7?

Am Donnerstag, 14. September 2006 09:33 schrieb Joerg Sonnenberger: On Wed, Sep 13, 2006 at 01:34:34PM -0700, walt wrote: The basic problem is whether an OS uses libpthread or libc_r for the threading library. Unfortunately, I have no idea why developers choose one over the other -- maybe

Re: pthread-changes from 1.6 to 1.7?

Am Mittwoch, 13. September 2006 19:02 schrieb Thomas Schlesinger: Hi, I don't know, if you've already seen it, so I post it here, too: The pkgsrc-package lang/ruby18-base doesn't build on 1.7. The build breaks with this error message: [..] Takahiro Kambe has tried it on 1.6 and was able

Re: pthread-changes from 1.6 to 1.7?

Am Mittwoch, 13. September 2006 22:34 schrieb walt: I'd love to know what the solution is -- could you post the patch here, or to my email address? Sure, Joerg's patch is attached. Thomas Index: distinfo === RCS file:

Re: make buildworld fails

Am Montag, 4. September 2006 20:00 schrieb Matthew Dillon: :Hi, : :make buildworld (up-to-date from cvs) fails for me with this error: : :cc -O -pipe -mtune=pentiumpro -DLIBC_RCS -DSYSLIBC_RCS : -I/usr/src/lib/libc/include -DI18NMODULE_MAJOR=1 -D_I18N_DYNAMIC : -D__DBINTERFACE_PRIVATE

Re: KDE and OpenSSL = Broken

Am Dienstag, 5. September 2006 19:05 schrieb Petr Janda: Hi, I compiled the latest KDE from pkgsrc, but it seems that SSL is broken somewhere. Konqueror doesnt load HTTPS sites and I cant log into msn since it uses SSL. snip O can confirm that, https-websites don't work here, too (e. g.

Re: make buildworld fails

Am Dienstag, 5. September 2006 19:00 schrieb Thomas Schlesinger: Yes, this error is gone now, but the next one appeared: [..] cc -O -pipe -mtune=pentiumpro -I/usr/src/sbin/atm/atm/../../../sys -static -o atm atm.o atm_fore200.o atm_eni.o atm_inet.o atm_print.o atm_set.o atm_show.o

Re: KDE on DFly question about firmware

Am Samstag, 2. September 2006 04:11 schrieb Sepherosa Ziehau: snip 1. I ping in 30-second-intervalls to an address in my WLAN from my notebook (ping -i 30), otherwise I lose connection after a while. Please try: http://leaf.dragonflybsd.org/~sephe/if_iwi.c.diff See whether it helps.

make buildworld fails

Hi, make buildworld (up-to-date from cvs) fails for me with this error: cc -O -pipe -mtune=pentiumpro -DLIBC_RCS -DSYSLIBC_RCS -I/usr/src/lib/libc/include -DI18NMODULE_MAJOR=1 -D_I18N_DYNAMIC -D__DBINTERFACE_PRIVATE -I/usr/src/lib/libc/../libc/locale -DINET6 -DPOSIX_MISTAKE

Re: KDE on DFly question about firmware

Am Samstag, 2. September 2006 04:11 schrieb Sepherosa Ziehau: snip I use an ipw2200 (second generation Centrino), and it works. The driver for this chip is integrated in the DFly sourcecode (the module is if_iwi), the firmware for the WLAN adapter can be installed via pkgsrc. You can

Re: KDE on DFly question about firmware

Am Mittwoch, 30. August 2006 17:52 schrieb Jonathon McKitrick: Two questions that will determine if I try DFly on my new laptop: 1. I see a lot of KDE users here. Does KDE work better that Gnome on DFly? Jonathan, I don't know, if KDE works better than Gnome. but it works good for me. The

Re: KDE problems

Am Dienstag, 29. August 2006 17:25 schrieb Gergo Szakal: Petr Janda wrote: 3) Kopete cant connect to msn. ICQ, Jabber work. Perhaps recent changes in the protocol (which broke almost all clients) cause this. ICQ works here with Kopete 0.11.3/kdenetwork-3.5.4, no problems so far. Thomas

Re: KDE problems

Am Dienstag, 29. August 2006 09:16 schrieb Petr Janda: Hi, I just installed kdebase3 and I have problems. 1) Clicking Contol Center in the KDE menu doesnt open control center, but running kcontrolcenter from the shell does open it. I havent tested if its actually usable if ran from the

Re: KDE problems

Am Dienstag, 29. August 2006 19:01 schrieb Petr Janda: Unfortunately, this didnt help. I created a new user, but control center and menu editor still dont work. I even deleted whole /usr/pkg and started from scratch a few days ago. Its getting quite frustrating. Is there anyway to find out

Re: KDE problems

Am Dienstag, 29. August 2006 19:13 schrieb Petr Janda: By the way Thomas, what do you do for themes? None of the ones on kde-look.org compile in DragonFly. Yes, I wasn't able to compile KDE-themes, too, but I'm not very familiar with make friends. I'm using good old Plastik, the color scheme

Re: start fluxbox on DFly

Am Samstag, 26. August 2006 23:53 schrieb Saverio Iacovelli: The /var/log/xorg.0.log file tells: (II) VIA: driver for VIA chipsets: CLE266, KM400/KN400, K8M800, PM800/PM880/CN400 (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (--) Chipset

Re: start fluxbox on DFly

Am Sonntag, 27. August 2006 11:37 schrieb Saverio Iacovelli: I configured mouse device and GUI checking Xorg.0.log file. Thank you very much for suggestions, xorg.conf is OK! Xterm starts, but I would: 1) starting Fluxbox instead xterm Create a file .xinitrc (with the leading dot!) in your

Re: question about packages installation

Am Sonntag, 27. August 2006 16:48 schrieb Saverio Iacovelli: So, I edit: #setenv PKG_PATH ftp://packages.stura.uni-rostock.de/pkgsrc-current/DragonFly/1.6.0-RELEASE/ i386/All pkg_add command works, but the problem is that not all packages are present in

Re: start fluxbox on DFly

Am Samstag, 26. August 2006 22:09 schrieb Saverio Iacovelli: Fluxbox doen not start! I created /etc/X11/xorg.conf file with xorgconfig. I posted information about my graphic and audio cards, that I obtained with my Windows XP box: snip Saverio, your /var/log/Xorg.0.log file would be

Re: How to get Flash to work in Firefox/Konqueror

Am Dienstag, 22. August 2006 08:59 schrieb Nigel Weeks: How come linux binaries are required? Are these plugins binary-only releases? It's a shame Firefox doesn't adopt one of the OS flash players, and roll it into their code for platforms that don't have native plugins... Which other

Re: How much of microkernel?

Matthew Dillon wrote: Well, DragonFly is definitely not a microkernel. We forked off of FreeBSD, after all, and that is a fairly monolithic kernel. I like the microkernel concept but putting core elements of an operating system into their own protection boxes result

Re: Multiple sounds

Am Montag, 21. August 2006 06:40 schrieb Petr Janda: You were correct. Is there any way to get this done automatically? Without manually changing all multimedia programs that make sound? Petr, you can enable multichannel sound by a script at boottime. I have enabled the driver loading in

Re: start fluxbox on DFly

Am Sonntag, 20. August 2006 15:27 schrieb Gergo Szakal: Saverio Iacovelli wrote: I don't know configure xorg.conf. Does it exist a specific documentation for xorg.conf configuration? I don't found the documentation that I need in www.x.org. Ain't there one under /usr/pkg/share/examples

Re: NVIDIA FreeBSD Kernel Feature Requests, interesting info for dfly?

Am Montag, 17. Juli 2006 01:00 schrieb walt: Hi James, I'm speaking as someone who's been asking dumb/newbie questions in these groups for several years now. I've never once been treated rudely or with 'attitude' so I hope you won't judge hastily from any one thread. The regulars in these

Re: DF_CoreGraphics

Am Montag, 17. Juli 2006 04:06 schrieb Nigel Weeks: I've been wandering through ATI's drivers with Boomerang decompiler (boomerang.sourceforge.net), specifically atioglxx.dll and referencing their SDK sources at http://www.ati.com/developer/sdk/RadeonSDK/Html/Info/Extensions/glATI.h and an

Re: est module

Am Donnerstag, 22. Juni 2006 18:34 schrieb YONETANI Tomokazu: snip Hm, the voltage 1308 is not listed in pentium_m_n740[]. I added code to also print the frequency in the above message. Can you try again with new file and tell me the above result? Yonatani, I've downloaded the

Re: est module

Am Freitag, 23. Juni 2006 17:23 schrieb YONETANI Tomokazu: On Fri, Jun 23, 2006 at 08:50:36AM +0200, Thomas Schlesinger wrote: Enhanced SpeedStep (1308 mV) % MHz - unknown CPU or operating point. ^^ module_register_init: MOD_LOAD (est, df26eef9, 0) error 45

est module

Hi, today, I've seen with pleasure that there's now an est module in the kernel. Unfortunately, it seems not to support my Pentium-M 1.73GHz (Pentium M-740, 533MHz FSB): #kldload est Intel(R) Pentium(R) M processor 1.73GHz: Enhanced Speedstep not supported on this processor

Re: est module

Am Donnerstag, 22. Juni 2006 15:36 schrieb [EMAIL PROTECTED]: On Thu, Jun 22, 2006 at 02:42:58PM +0200, Thomas Schlesinger wrote: Unfortunately, it seems not to support my Pentium-M 1.73GHz (Pentium M-740, 533MHz FSB): NetBSD has /* Intel Pentium M processor 740 1.73 GHz */ static const

Re: est module

Am Donnerstag, 22. Juni 2006 17:29 schrieb YONETANI Tomokazu: snip So my question is: Thomas(and anybody else), can you try my untested patch and see if it works for you? (untested because I don't have access to any Pentium-M machines now) snip Yonetani, thanks for your patch. First, it

Re: est module

Am Donnerstag, 22. Juni 2006 19:21 schrieb Thomas Schlesinger: snip With this settings, Speedstep did work in Linux. I've set the CPU Power Saving to DISABLED, but that didn't help, the same error occurs. I've also booted with CPU Power Saving DISABLED and without ACPI, same thing. I

Re: est module

Am Donnerstag, 22. Juni 2006 18:34 schrieb YONETANI Tomokazu: snip Hm, the voltage 1308 is not listed in pentium_m_n740[]. I added code to also print the frequency in the above message. Can you try again with new file and tell me the above result? Sure, if you give me the code ;-) Thomas

DragonflyBSD on the desktop (was: Re: Replacing Sendmail with Postfix in the base system)

Am Mittwoch, 14. Juni 2006 15:49 schrieb [EMAIL PROTECTED]: I dispute that. DragonFly will be just as suited for desktops as Linux is. Simply because X works and desktop environments work on it. I really wish that. However, in the near coming days, noone will use DragonFly on desktop simply

Re: DragonflyBSD on the desktop (was: Re: Replacing Sendmail with Postfix in the base system)

Am Mittwoch, 14. Juni 2006 21:41 schrieb Matthew Dillon: :Is there an official binary driver policy for DragonFly? I understand :people want the fast GUI and stuff to work, but giving in to the crap :that companies push on the open source community isn't acceptable in :my opinion. Its just

Re: Weird ipw2200 problem

Am Samstag, 10. Juni 2006 17:37 schrieb Thomas Schlesinger: Hi, I'm using the if_iwi driver for several weeks now and have an annoying problem. snip Does somebody here use an ipw2200 under DragonFlyBSD without problems? If so, what's your setup? Thomas

Re: Next Preview, when?

Am Dienstag, 6. Juni 2006 17:57 schrieb Matthew Dillon: snip Pretty soon actually. It looks like the scheduler is stable again, and it looks like YONETANI Tomokazu may have found the pppoe netgraph issue. There have been a lot of bug fixes, especially to the filesystem and

Re: A mobile user's wishlist

Am Dienstag, 6. Juni 2006 20:43 schrieb Freddie Cash: snip KControl - Power Control - Laptop Battery doesn't work for you? This starts the klaptop daemon that monitors the battery. I haven't tried it on DFlyBSD, but it worked nicely for me in FreeBSD. It's part of the KDE release,

Re: Next Preview, when?

Am Dienstag, 6. Juni 2006 20:54 schrieb Thomas Schlesinger: snip Matt, your latest patches seems to have broken DragonFly's ability to run KDE. At least my machine freezes after booting with a kernel from today's code. Thomas Reading Sascha's mixer posting, I should add, that KDE

Re: Next Preview, when?

Am Dienstag, 6. Juni 2006 21:38 schrieb Matthew Dillon: :Reading Sascha's mixer posting, I should add, that KDE is freezing on :startup while initializing devices, including sound and sound mixer. : :Thomas Could you try it now with the commit I just made to the mixer ?

Re: A mobile user's wishlist

Am Mittwoch, 7. Juni 2006 04:10 schrieb YONETANI Tomokazu: On Tue, Jun 06, 2006 at 08:23:23PM +0200, Thomas Schlesinger wrote: I'm using DragonFlyBSD for a few weeks now on my notebook an miss some pieces of software: 1. CPU speed control for Pentium-M (Enhanced SpeedStep driver) Ok

Wiki: Device-specific Howto

Hi all, I've created a site for device-specific mini-Howto's in the (backup-)wiki: http://wiki.dragonflybsd.org.fortunaty.net/cgi/moin.cgi/HowToDevice . Feel free to enrich it with your knowledge ;-) Thomas

Re: PkgSrc Help

Am Donnerstag, 18. Mai 2006 04:42 schrieb Douglas S. Keester: PkgSrc Help Von: Douglas S. Keester [EMAIL PROTECTED] An: users@crater.dragonflybsd.org Datum: Heute 04:42:02   Since the WIki is currently down, will someone please post the PkgSrc HOWTO to the list? Sure. It's

Re: Setting the processor speed

Am Mittwoch, 10. Mai 2006 17:13 schrieb Thomas Schlesinger: snip Johannes, thank you very much! A make for esctrl gives me this error: Warning: Object directory not changed from original /home/thomas/Downloads/est/estctrl-0.7 cc -O -pipe -mtune=pentiumpro -Wunknown-pragmas -Wsystem

Re: Shutdown

Am Dienstag, 9. Mai 2006 12:34 schrieb Sascha Wildner: Thomas Schlesinger wrote: Hi, when I shutdown my notebook (ASUS V6800), I get a message to power it of on console, but it doesn't happen automagically as in Linux. I believe to remember, that I've read somewhere something about

Setting the processor speed

Hi, is there a tool available to set the processor speed (not the throttling) for Pentium-M CPUs? Thomas

Re: Puzzling error messages from 'make'

Am Donnerstag, 4. Mai 2006 17:38 schrieb Thomas Schlesinger: Am Mittwoch, 3. Mai 2006 21:49 schrieb walt: I've been trying for two days to build firefox from pkgsrc, but the build always halts with this error which I can't decipher: ranlib libjsurl_s.a /usr/pkgsrc/www/firefox/work

Re: 80211 patch3 (to be committed)

Am Montag, 1. Mai 2006 03:09 schrieb Sepherosa Ziehau: Hi all, I have rearranged the previous 80211 patch: http://leaf.dragonflybsd.org/~sephe/802_11.diff3 NOTE: snip Sepherosa, sometimes, my notebook (Asus V6800, ipw2200) crashes, when I try to re-establish a disconnected WPA-session. I

Re: Puzzling error messages from 'make'

Am Mittwoch, 3. Mai 2006 21:49 schrieb walt: I've been trying for two days to build firefox from pkgsrc, but the build always halts with this error which I can't decipher: ranlib libjsurl_s.a /usr/pkgsrc/www/firefox/work/mozilla/config/nsinstall -R -m 644 libjsurl_s.a ./../../dist/lib

Re: 80211 patch3 (to be committed)

Am Montag, 1. Mai 2006 03:09 schrieb Sepherosa Ziehau: Hi all, I have rearranged the previous 80211 patch: http://leaf.dragonflybsd.org/~sephe/802_11.diff3 NOTE: 1) Apply this patch at /usr/src, don't forget -p0 in `patch'. It should apply cleanly to HEAD or PREVIEW 2) You will need to at

Bug reports for pkgsrc

Hi, is there an official bug tracker for faulty pkgsrc builds? Thomas

pkgsrc-problems

Hi Jörg, there are problems with some pkgsrc-packages: package mpeg4ip: snip checking whether the f77 linker (/usr/pkgsrc/multimedia/mpeg4ip/work/.wrapper/bin/ld) supports shared libraries... yes checking dynamic linker characteristics... dragonfly ld.so checking how to hardcode library paths

Re: pkgsrc-problems

Am Samstag, 22. April 2006 15:58 schrieb Thomas Schlesinger: Hi Jörg, there are problems with some pkgsrc-packages: snip A follow-up: package /usr/pkgsrc/emulators/suse91_base: snip === Installing for suse_base-9.1nb9 === Creating installation directories for FILE in /usr/pkgsrc/emulators

Re: pkgsrc-problems

Am Samstag, 22. April 2006 15:58 schrieb Thomas Schlesinger: snip Another follow-up: package kmymoney2: snip kmymoney2.o(.text+0xf966): In function `KMyMoneyPlugin::ImporterPlugin* KParts::ComponentFactory::createInstanceFromFactoryKMyMoneyPlugin::ImporterPlugin(KLibFactory*, QObject*, char

Re: GNU make not installed

Am Freitag, 21. April 2006 19:11 schrieb Saverio Iacovelli: I installed gmake-3.80nb5.tgz by ftp://packages.stura.uni-rostock.de/pkgsrc-current/DragonFly/RELEASE/i386/A ll/, but this package require gettext-lib-0.14.5.tgz. I installed gettext-lib-0.14.5.tgz also, but appears the message: this

Re: Getting nuts with pkgsrc

Am Mittwoch, 19. April 2006 21:10 schrieb Thomas Schlesinger: snip When I try to build /usr/pkgsrc/wip/xorg-server (after deleting the previous installed x-related packages), I get this error message: SchlesisNB# pwd /usr/pkgsrc/wip/xorg-server SchlesisNB# bmake install clean === Checking

Re: Getting nuts with pkgsrc

Am Mittwoch, 19. April 2006 21:58 schrieb [EMAIL PROTECTED]: On Wed, Apr 19, 2006 at 09:10:08PM +0200, Thomas Schlesinger wrote: after problems with binary packages (no ogg-support in KDE and crashing KDE) Can you be more verbose? I've tried to build KDE from source *the last three days

Re: Getting nuts with pkgsrc

Am Mittwoch, 19. April 2006 22:20 schrieb Jeremy C. Reed: On Wed, 19 Apr 2006, Thomas Schlesinger wrote: === Required package xorg-server=6.9.0: NOT found === Verifying reinstall for ../../x11/xorg-server bmake: ../../x11/Xrender/../../x11/Xrender/buildlink3.mk line 20: Could not find

Re: 80211 patch1

Am Montag, 17. April 2006 03:37 schrieb Sepherosa Ziehau: snip My fault, missing a crit_enter(), please change sys/dev/netif/iwi/if_iwi.c iwi_load_firmware() near these lines: CSR_WRITE_4(sc, IWI_CSR_CTL, tmp | IWI_CTL_ALLOW_STANDBY); /* wait at most one second for

Re: 80211 patch1

Am Sonntag, 16. April 2006 13:00 schrieb Sepherosa Ziehau: Hi all, I have managed to port fbsd6's net80211, based on patch sumbitted by Andrew Atrens and Adrian Michael Nida snip Sepherosa, I've got working WPA finally on my ipw220. Thank you *very* much for your work and your support!

Re: 80211 patch1

Am Montag, 17. April 2006 15:27 schrieb Sepherosa Ziehau: snip You seem to forget to load firmware before bring iwi(4) up. Did you have something like Please load firmware in your dmesg or /var/log/messages? ifconfig iwi0 up nohup wpa_supplicant -i iwi0 -c /etc/wpa_supplicant.conf

Re: 80211 patch1

Am Montag, 17. April 2006 16:02 schrieb Sepherosa Ziehau: On 4/17/06, Thomas Schlesinger [EMAIL PROTECTED] wrote: iwicontrol iwi0 -d /usr/libdata/iwi_firmware ifconfig iwi0 up nohup wpa_supplicant -i iwi0 -c /etc/wpa_supplicant.conf /var/log/wpa.log use wpa_supplicant -B to put

Re: 80211 patch1

Am Sonntag, 16. April 2006 20:24 schrieb Simon 'corecode' Schubert: On 16.04.2006, at 17:45, Thomas Schlesinger wrote: how do I compile kernel/modules with INVARANTS? cd /usr/src echo options INVARIANTS /sys/i386/conf/$YOUR_KERNEL_CONFIG make quickkernel# or do we need

Re: 80211 patch1

Am Sonntag, 16. April 2006 13:00 schrieb Sepherosa Ziehau: Hi all, I have managed to port fbsd6's net80211, based on patch sumbitted by Andrew Atrens and Adrian Michael Nida Please try following patch: http://leaf.dragonflybsd.org/~sephe/802_11.diff1 Sepherosa, I want to give you a first

Re: WLAN doesn't work

I've written a small how-to for setting up an ipw2200 adapter in the Wiki (http://wiki.dragonflybsd.org/index.php/Set_up_ipw2200). Feel free to optimize it ;-) Thomas

Re: WLAN doesn't work

Am Donnerstag, 13. April 2006 00:14 schrieb Thomas Schlesinger: snip I've found out something strange meanwhile: I get only a connection, when I disable encryption *and* enable the transmission of the SSID. I'll investigate it further tomorrow, now it's heavy time to sleep ;-) Thank you

How to enable a bootsplash screen

Hi, I've followed http://leaf.dragonflybsd.org/mailarchive/submit/2003-10/msg4.html to enable a boot splash, but it didn't work. This is an excerpt of my /boot/defaults/loader.conf: [..] splash_bmp_load=YES splash_pcx_load=NO vesa_load=YES bitmap_load=YES

Re: installing DFly over third partition

Am Donnerstag, 13. April 2006 19:01 schrieb Saverio Iacovelli: Hello, I downloaded DragonFly 1.4.2. I must to install DragonFly on my laptop, and the hard disk's partioning is the following: - First partition with Windows XP - Second partition with Linux - other I must to create a third

WLAN doesn't work

Hi, I can't get WLAN to work. I use an Asus V6800 notebook with ipw2200. I loaded the wlan module with: kldload if_iwi /var/log/messages tells me: Apr 12 19:51:20 SchlesisNB su: thomas to root on /dev/ttyp1 Apr 12 19:51:26 SchlesisNB kernel: cbb0: RF5C476 PCI-CardBus Bridge at device 1.0 on

Re: WLAN doesn't work

Am Mittwoch, 12. April 2006 22:35 schrieb [EMAIL PROTECTED]: On Wed, Apr 12, 2006 at 08:34:00PM +0200, Thomas Schlesinger wrote: thanks for your reply. I didn't install the iwi_firmware. How can I it? I can't install it with pkg_add (I'm a litke bit confused about installing software

Re: WPA support

Am Montag, 10. April 2006 15:42 schrieb Erik Wikström: On 2006-04-10 12:16, Thomas Schlesinger wrote: Hi, as I've seen in the Wiki, there's support for ipw2200. But after goggleing a while, I got the impression, that WPA encryption is not possible yet. Is this correct? Is there support

Re: installing DFly 1.5.2

Am Samstag, 8. April 2006 16:33 schrieb Justin C. Sherrill: On Sat, April 8, 2006 11:33 am, Saverio Iacovelli wrote: Hello, I would to install DragonFly 1.5.2 on my laptop. 1 - There are iso images of DragonFly BSD 1.5.x? or 2 - Can I to install DragonFly by net? The latest build of

Re: installing DFly 1.5.2

Am Samstag, 8. April 2006 17:19 schrieb Saverio Iacovelli: Saverio, the Latest-preview didn't work for me, I got an error in the installer after a while. Better download the official 1.4 release CD and update DF after installation. Thomas Can I download DFly 1.4.2's iso? It's

Re: ACPI (Re: ICH7 ?)

Am Donnerstag, 6. April 2006 19:38 schrieb Sascha Wildner: snip Our ACPI surely could need an update. Any takers? Sascha Hearing that, it can add a bug report: when I boot the DragonFly 1.4 CD on my Asus V6800 notebook with ACPI enabled, the keyboard doesn't work on the login prompt. When

Re: Newbie-question: Ports and Packages

Am Montag, 3. April 2006 00:16 schrieb Simon 'corecode' Schubert: On 02.04.2006, at 22:37, Thomas Schlesinger wrote: it would be very nice, if the documentation would be upgraded before the next one tapping into this trap ;-) I think that's barely possible. I could imagine people hitting

Newbie-question: Ports and Packages

Hi, I'm a Gentoo Linux user and want to try out DragonFlyBSD, so I'm a *BSD rookie. I've installed DragonFlyBSD successfully, but I'm not able to install software with pkg_add. I've tried out to build the lsof-packages, following the Handbook

Re: Newbie-question: Ports and Packages

Am Sonntag, 2. April 2006 19:29 schrieb Justin C. Sherrill: snip I've installed DragonFlyBSD successfully, but I'm not able to install software with pkg_add. I've tried out to build the lsof-packages, following the Handbook (http://leaf.dragonflybsd.org/~justin/handbook/packages-using.html).