On 24.03.12 17:34, Andrey N. Oktyabrski wrote:
I will wait some days...
Less than one day :-( Symptoms are:
- wifi works fine, I can log in to the machine by ssh.
- I can use Internet from the machine
- I can not use Internet from local net. PF NAT or routing do not work.
PF restart/reload
On 24.03.12 09:06, Andrey N. Oktyabrski wrote:
PF NAT do not work with tun0
This is not correct: it works but only day or two.
On Sat, Mar 24, 2012 at 10:03:19AM +0400, Andrey N. Oktyabrski wrote:
On 24.03.12 09:06, Andrey N. Oktyabrski wrote:
PF NAT do not work with tun0
This is not correct: it works but only day or two.
This is normal if your ppp connection does not come with a static IP address.
You should use a
On 24.03.12 11:55, Francois Tigeot wrote:
On Sat, Mar 24, 2012 at 10:03:19AM +0400, Andrey N. Oktyabrski wrote:
On 24.03.12 09:06, Andrey N. Oktyabrski wrote:
PF NAT do not work with tun0
This is not correct: it works but only day or two.
This is normal if your ppp connection does not come
On 24.03.12 17:34, Andrey N. Oktyabrski wrote:
On 24.03.12 11:55, Francois Tigeot wrote:
On Sat, Mar 24, 2012 at 10:03:19AM +0400, Andrey N. Oktyabrski wrote:
On 24.03.12 09:06, Andrey N. Oktyabrski wrote:
PF NAT do not work with tun0
This is not correct: it works but only day or two.
This
2012/3/19 Andrey N. Oktyabrski a...@bestmx.ru:
Good day.
How can I configure PPPoE interface? Now I use ppp program with this
configuration:
pppoe:
set device PPPoE:fxp0 #Interface to adsl-modem-bridge
set authname USERNAME
set authkey PASSWORD
set dial
set login
add default
On 24.03.12 03:54, Nuno Antunes wrote:
As far as I know, ppp is currently the only way to configure PPPoE
sessions on DragonFly. The ppp userland program makes use of ng_pppoe
kernel counterpart to deal with the PADIs/PADOs etc of the PPPoE
session.
Thank you, I have seen it by the ngctl utility
Good day.
How can I configure PPPoE interface? Now I use ppp program with this
configuration:
pppoe:
set device PPPoE:fxp0#Interface to adsl-modem-bridge
set authname USERNAME
set authkey PASSWORD
set dial
set login
add default HISADDR
nat enable yes
$ ps ax | grep ppp
254
the pipe' where network
is the pipe -
but this can generally come later after you can 100% ping the remote
end of the tunnel - so step #1 is verifying the remote connection
simply to the other end of the pppoe link.
As I remember, the mtu has to be 1492 because of encapsulating
an extra frame
' where network
is the pipe -
but this can generally come later after you can 100% ping the remote
end of the tunnel - so step #1 is verifying the remote connection
simply to the other end of the pppoe link.
As I remember, the mtu has to be 1492 because of encapsulating
an extra frame
On 07/08/11 11:15, Georg Bege wrote:
Hi
I've to say that I've got it to work finally!
I was playing with it yesterday evening, and suddenly it work - Im
unsure if it was a typo or whatever - really dont get it.
But its okay now!
Nice!
I forgot to warn about the 'dreaded ppp.conf
to use PPPoE to login to my internet (which
is essential for the purpose of this box).
I seem to get an IP but I cannot ping anything (eg. no routing?)
ppp.log:
Jul 7 04:24:05 aquina ppp[337]: tun0: IPCP: myaddr 84.62.131.143 hisaddr =
84.62.128.1
Jul 7 04:24:05 aquina ppp[337
mismatch
Though I don't have direct pppoe experience on FreeBSD/DragonFly -
I did once use the OpenBSD implementation (which uses a userspace daemon
rather than the netgraph device) -
I had some issues with the mtu matchup which caused some issues -
My archived configuration had :
set mtu max
in your ifconfig
output - was the ppp0 device output truncated or ?
If I am correct, it sounds like perhaps some data is flowing but
not all - which could indicate an MTU mismatch
Though I don't have direct pppoe experience on FreeBSD/DragonFly -
I did once use the OpenBSD implementation
.
Whatever I try Im not able to use PPPoE to login to my internet (which
is essential for the purpose of this box).
I seem to get an IP but I cannot ping anything (eg. no routing?)
I'll attach my ppp.conf and a ppp.log (for the logging options I used,
see the conf.)
Of course my auth is correct, else I
Hi.
On Thu, Jul 07, 2011 at 04:47:23AM +0200, Georg Bege wrote:
I actually never had a lot of issue regarding this, but now Im running
out of ideas.
Whatever I try Im not able to use PPPoE to login to my internet (which
is essential for the purpose of this box).
I seem to get an IP but I
16 matches
Mail list logo
