:
:Thanks for your reply.
:
:I don't remember if I installed it on a disklabel or a slice. I will
:be able to know what I did once I get the usb flash disk with the
:system and look at the fstab.
:
:Hopefully, I didn't lose data because I did several backups before :-)
Ok, if the data is impo
Thanks, guys. Yes, I can see how it would slow down on the bad spots. I'm
just happy it's working as well as it is and I'll try to be patient. Any
way you can add a progress bar to this thing? :-)
Tim
On Sun, Feb 20, 2011 at 4:15 PM, Justin C. Sherrill <
jus...@shiningsilence.com> wrote:
> O
On Sun, February 20, 2011 4:28 pm, Tim Darby wrote:
> The good news is that it's recovering a ton of data! The
> bad news is that it's taking an incredible amount of time. So far it's
been
> running 24 hours. Is that to be expected? The bad disk had approximately
> 50GB on it, as reported by th
Thanks for your reply.
I don't remember if I installed it on a disklabel or a slice. I will
be able to know what I did once I get the usb flash disk with the
system and look at the fstab.
Hopefully, I didn't lose data because I did several backups before :-)
2011/2/20 Matthew Dillon :
>
> :Hi,
>
:This was a 1.8.2 system. Having a 1.9 system handy, I plugged the drive
:(300GB IDE) into it and tried hammer recover for the first time to see what
:I could save. The good news is that it's recovering a ton of data! The bad
:news is that it's taking an incredible amount of time. So far it's b
>Has anybody setup a dual boot system with DragonFlyBSD and WinXP?
Yes, I use the DragonFly boot loader (installed by boot0cfg(8)).
Please make a backup of sector 0 (e.g. use 'boot0cfg -f'),
before installing DragonFly boot loader, so you can restore it if needed.
There is a minor caveat: 'boot0
I have a very old server that I was pretty sure was going to fail sometime
soon, so I prudently started building a new one. Unfortunately, I wasn't
quite fast enough and the boot drive failed this week. When it tries to
mount root, it issues the usual successful hammer startup messages and then
q
Hahaha... ok, well, I spoke too soon. U-Verse is a piece of crap.
That's my conclusion. Here's some detail:
* The physical infrastructure is fine, as long as you make sure
there's no packet loss. To make sure you have to upload and
download continuously at th
:Hi,
:
:So I deciced to format the master drive to install the system on and
:then get back my data from the slave. But, that's not cool, when I try
:to mount I get this message "Not a valid HAMMER filesystem".
:
:Did I destroyed the filesystem by installing the bootblock on both disks ?
:Can I ge
Hi,
I was using dragonfly bsd 2.8 x64 with 2 hard drives. Each hard drives
were hammerfs powered and one hdd was a backup of the other with
pfs-master / pfs-slave. The system was on a usb flash disk and it was
just very slow and too little .
So I deciced to format the master drive to install the
Hello,
Has anybody setup a dual boot system with DragonFlyBSD and WinXP?
I have 3 primary partitions on my WinXP laptop; I installed
DragonFlyBSD on the third partition that is beyond 60G. I skipped the
step to install the boot blocks, since I want to use NTloader to boot
DragonFly. Later, I copi
11 matches
Mail list logo