On Monday, September 03, 2012 11:15:02 Jelle Hermsen wrote:
Using a bignum library like GMP ( http://gmplib.org/ ) might be a good
idea when precision is that important.
This program doesn't use or need bignums, and GMP has neither infinity nor NaN
nor trig functions.
Pierre
--
.i toljundi
On Friday, August 31, 2012 18:33:36 Jelle Hermsen wrote:
Personally I just define pi with 4*atan(1). Is there a good reason to use
M_PI1 instead?
I defined M_PIl as (4*atan(1.)) and ran the program. It gave the same result as
defining M_PIl as M_PI. The reason for using M_PIl is that it's a
I'm developing a program which represents angles internally as binary
fractions (0x8000 means 360°). To convert the angle to radians, I used
M_PI originally, felt I needed more accuracy, and found that Linux has M_PIl,
which has a few extra digits so that it is accurate as a ten-byte float
I just upgraded the kernel to v3.1.0.1391.g26dd3-DEVELOPMENT and rebooted. I
then logged into KDE. I got a window saying that Nepomuk Stub had crashed,
which hadn't happened before (I see a window saying that Konversation
crashes, when it's been running several days). A few seconds later, while
On Wednesday 15 August 2012 13:35:23 John Marino wrote:
This was a full run, nothing was masked. We're over 11,700 packages for
now (96.4%). The build logs are available this time, see link below.
Most of the regressions have already been fixed by their maintainers and
Asterisk 10 should
On Tuesday 14 August 2012 10:28:07 Antonio Huete Jimenez wrote:
Folks,
Patch to skip redo recovery is here:
http://leaf.dragonflybsd.org/~tuxillo/archive/patches/hammer_skipredo02.pat
ch
I've built an i386 kernel + modules with that patch, and it can be
downloaded from here:
hammer show-undo on that filesystem succeeded.
Pierre
--
I believe in Yellow when I'm in Sweden and in Black when I'm in Wales.
On Monday 13 August 2012 15:38:46 Matthew Dillon wrote:
If you have a DDB prompt you can hit the scoll-lock button and then
cursor up.
HAMMER(ROOT) recovery check seqno=7a824b53
recovery range 308735b0-30878e48
recovery nexto 30878e48 endseqno=7a824c80
recovery
My UPS glitched and rebooted the computers. The DF box kernel-panicked like
this:
lockmgr
vx_unlock
vnode_terminate
_sysref_put
vrele
vput
hammer_recover_stage2
hammer_vfs_mount
vfs_mount
vfs_mountroot_try(c06e220a,0,c[6e21f8,c8,0) at vfs_mountroot_try+0x242
0xc03df6de
On Sunday 12 August 2012 10:51:45 Sascha Wildner wrote:
On Sun, 12 Aug 2012 16:38:33 +0200, Pierre Abbat p...@phma.optus.nu
wrote:
I tried an old CD of DFly 2.8.2 and it said wrong superblock when I
tried to
mount it. I'll try booting a recent version and see what happens.
Were you
I realized after typing that that partition c is the whole-disk partition and
tried d. This time it said mount unsupported fs version 5. So I have to
download the latest USB or CD and boot that. I succeeded at unlocking the
crypt volume, but it's version 6.
Pierre
--
lo ponse be lo mruli
I burned a CD and attempted to mount the faulty partition and got the same
error as booting from the HDD. Then I rebooted and don't know what to do
next.
Pierre
--
.i toljundi do .ibabo mi'afra tu'a do
.ibabo damba do .ibabo do jinga
.icu'u la ma'atman.
On Tuesday 07 August 2012 10:08:37 Justin Sherrill wrote:
I am in a spot with limited bandwidth, so I can't confirm this, but this
should have uploaded as pkgsrc-2012q2 on Avalon. I haven't had a i386
build complete yet. Hasn't crashed yet, though...
Looks good! How far along is the i386
On Tuesday 07 August 2012 17:16:28 Justin Sherrill wrote:
It was somewhere around 2500, I think, and then the filesystem filled up.
It was writing to disk faster than it was pruning, I think, because when I
got to it, the disk had plenty of room from subsequent pruning. I
restarted it but I
On Friday 03 August 2012 04:19:22 Jelle Hermsen wrote:
Thanks for all these great tips. I'm building a new workstation and I'll
probably buy an ssd and use it as root. I'm thinking about maximizing
the amount of ram and then use tmpfs for /tmp. This will (hopefully)
still leave me with enough
This is a spinoff of the Aleutia question, since Aleutia puts SSDs in
computers. How does the periodic Hammer job handle SSDs? Does reblocking do
anything different than on an HDD? If a computer has an SSD and an HDD, which
should get the swap space?
Pierre
--
lo ponse be lo mruli po'o cu
On Sunday 29 July 2012 15:15:54 Juan Francisco Cantero Hurtado wrote:
Write a email to the support department and ask for a dragonfly dmesg. If
they can't give you the information, request a linux dmesg.
How would a Linux dmesg tell whether DragonFly would run on it?
Pierre
--
li fi'u vu'u
I'm going to move to a house with standalone solar power, so I looked for
low-power computers. I found aleutia.com. Do you think those boxes will have
any problem wih DragonFly?
Pierre
--
La sal en el mar es más que en la sangre.
Le sel dans la mer est plus que dans le sang.
On Wednesday 25 July 2012 13:54:11 Tim Darby wrote:
Unfortunately, it failed during boot on my Dell Studio 14z laptop (1440),
so I think DF just doesn't like this hardware. I did try booting without
ACPI and AHCI, but no luck. Lots of errors, but where it failed each time
was at device xpt.
1. When I run bc, I frequently edit the previous line and make a change:
15/56
.26785714285714285714
a(15/56)
.26171350240120506395
a(15/56)*45/a(1)
14.99507912917598589467
In Linux, I hit uparrow and edit the line. In DFBSD, I have to type the whole
line again. This is, I'm sure, a license
On Thursday 19 July 2012 21:40:44 Stéphane Russell wrote:
I finally got a PC to make myself a GUI workstation with DragonFly. I
first tried Gnome, without success. There seem to be issues with GConf
and HAL, and the console is not available to GDM. So I tried XDM along
with a XFCE GUI and it
On Thursday 21 June 2012 23:12:40 Pierre Abbat wrote:
I burned a CD of the latest 64-bit DragonFly and booted a 64-bit laptop
with it. It started CPUs 0 through 7 and then issued the following
messages:
WARNING: waiting for the following device to finish configuring:
xpt: func
On Wednesday 27 June 2012 20:40:38 elekktrett...@exemail.com.au wrote:
Even considering that a non-profit registration is necessary?
Because majority of people, including me, consider donating for the
specific reason of reducing personal taxes.
I'd rather pay $100 to DragonFlyBSD than to
I burned a CD of the latest 64-bit DragonFly and booted a 64-bit laptop with
it. It started CPUs 0 through 7 and then issued the following messages:
WARNING: waiting for the following device to finish configuring:
xpt: func=8027dd67 arg=0
tryroot cd8
no disk named 'cd8'
setrootbyname
The build got up to octave [4002/12503] and the computer crashed and dumped
core. I think it's because I was trying to kill a process, of which there
should be at most one because it's a cron job, of which there were eleven,
and then ran pidof to see if any new ones had popped up. I will, as I
On Tuesday 05 June 2012 19:47:07 Justin Sherrill wrote:
Your computer crashed during the build too, possibly from the same issue.
I don't think you are going to get any farther than I did.
I'm up to 2776, and 2485 was SDL_gfx as before, so I got farther than I did,
and the crash was not caused
A friend gave me a laptop with a 4-core processor that looks like 8 because of
hyperthreading and two 500 GB drives, but one of the drives is in storage,
not in the laptop (he was experimenting with the drives before he put it away
for some years). I'm thinking of installing dual-boot DragonFly
On Tuesday 05 June 2012 09:26:34 Justin Sherrill wrote:
If you're having problems with a couple packages not rebuilding, the
fix is not going to be building 12500 additional packages. If there's
specific packages you can't get to upgrade, looking at the errors for
those exact items will do
On Tuesday 05 June 2012 16:15:15 Justin Sherrill wrote:
You're still going to end up building 12,500 packages. The -q option
just doesn't update the pkgsrc files, which makes the startup time a
bit shorter. You are going down the wrong path for what you want to
do.
No I'm not. What I want
On Tuesday 05 June 2012 16:59:53 Pierre Abbat wrote:
What is the correct way to restart a bulk build where it left off?
I found this in the man page of pbulk-build:
It then writes suc-
cessful builds to success and failing builds to error. If either success
or error exists at start
On Tuesday, June 05, 2012 07:47:07 PM Justin Sherrill wrote:
Your computer crashed during the build too, possibly from the same issue. I
don't think you are going to get any farther than I did.
Ah. I understood that you had a failure such as a head crash or a burned-out
motherboard that made
[2485/12503] Successfully built SDL_gfx-2.0.23
[2486/12503] Starting build of qt4-sqlite3-4.8.0nb2
Read from remote host darner: Connection reset by peer
Connection to darner closed.
I was browsing a website and I clicked on a link and the computer froze and
wouldn't even respond to hitting the
On Monday 28 May 2012 22:29:41 Pierre Abbat wrote:
It works now! I touched the wheel while looking at a website and it
scrolled. I guess recompiling X fixed it.
When I rebooted, the scroll wheel stopped working. Any suggestions?
Pierre
--
sei do'anai mi'a djuno puze'e noroi nalselganse srera
On Monday 04 June 2012 13:13:42 Edward M wrote:
On 06/04/2012 07:02 AM, Pierre Abbat wrote:
Any suggestions?
maybe connetor is loose from the computer. try reconnecting it.
The mouse works, and the scroll wheel works in Windows. Scroll wheel data are
sent serially on the same line
On Monday 04 June 2012 09:38:23 Pierre Abbat wrote:
[2485/12503] Successfully built SDL_gfx-2.0.23
[2486/12503] Starting build of qt4-sqlite3-4.8.0nb2
Read from remote host darner: Connection reset by peer
Connection to darner closed.
.. 10550
# du -s *
7 COPYRIGHT
0 IN_CHROOT
10037 bin
839 boot
1 build.sh
51972 bulklog
0 compat
0 dev
2782472 distfiles
9477etc
0 home
0 media
0 mnt
2059650 packages
0 proc
1 root
35711 sbin
3 settings.conf
0 sys
0
On Friday 01 June 2012 15:08:51 Sascha Wildner wrote:
What did you do to have no snapshots on /olv?
If you turned off the nightly cleanup then it has probably accumulated
fine grained history.
-bash-4.2$ hammer config /olv
snapshots 0d 0d
prune 1d 5m
rebalance 1d 5m
dedup 1d 5m
It works now! I touched the wheel while looking at a website and it scrolled.
I guess recompiling X fixed it.
Pierre
--
The Black Garden on the Mountain is not on the Black Mountain.
On Thursday 24 May 2012 14:58:32 Justin Sherrill wrote:
If you're using my simplepbulk script, run clean.sh again without the
-a qualifier, and it'll rescan and restart with only unbuilt
packages.
Also, this will possibly happen again. I've had trouble getting
builds to finish due to bug
I brought up Firefox (I had been doing it on the laptop, but I took it out
last night and will take it out tonight) and Gimp on darner. Also hammer has
been running over 13 hours, which is highly unusual; usually it takes 20 or
40 minutes. I have over 70 GB on the disk that holds the bulk
I have a VPN; sometimes it doesn't work properly.
chausie is the Linux box, which runs the VPN; it has eth0 and ppp0. darner is
the DragonFly box; it has em0. linksys is a router; chausie's eth0 and
darner's em0 are connected to the LAN side. sco is behind NAT on the other
end of the VPN.
I
Just passed 10%, though the big ones qt4 and kdelibs4 are already built.
Pierre
--
li fi'u vu'u fi'u fi'u du li pa
On Wednesday 23 May 2012 10:08:48 Nuno Antunes wrote:
Are you saying that ping was working even if you didn't see the
packets going through chausie?
Which route is darner using to reach sco? Did it change before and
after the traceroute?
The default route is through linksys, the route to sco
On Saturday 19 May 2012 12:00:31 John Marino wrote:
On 5/19/2012 15:08, Venkatesh Srinivas wrote:
Just for reference, can you point of some/all of these packages?
Thanks!
-- vs;
http://ops101.org/4k/
Hi Venkatesh,
The following eight packages were masked:
net/skype1
There's also
Packages for i386 are building. It's about 4% done, by number of packages,
though qt4 and maybe some packages that depend on it will take a day or more.
Pierre
--
li ze te'a ci vu'u ci bi'e te'a mu du
li ci su'i ze te'a mu bi'e vu'u ci
On Sunday 06 May 2012 00:02:25 Edward wrote:
Thanks everyone for the support
Exhausted after 15 hrs of compiling, pkg_delete and
pkg_rolling-replace, finally finished.
last message reads: no more packages to replace; done Hope my apps
will run and everything is sync. 8-)
Only 15
On Sunday, May 06, 2012 21:10:24 Justin Sherrill wrote:
pkgtools/pbulk will build everything, upload it, and produce a report.
There's very little documentation, though. I think you can also
'bmake package' for individual items and it will create packages in
/usr/pkgsrc/packages.
I
I ran into another snag:
gmake[2]: Leaving directory `/usr/obj/pkgsrc/devel/orc/work/orc-0.4.16/tools'
Making all in examples
gmake[2]: Entering directory
`/usr/obj/pkgsrc/devel/orc/work/orc-0.4.16/examples'
../tools/orcc --implementation -o example1orc.c ./example1orc.orc
../tools/orcc --header
On Monday, May 07, 2012 14:50:31 Matthias Rampke wrote:
I think you can, if pressed on time and this happens a lot for a particular
.so, just create the symlink, let pkg_rolling-replace run through, then
delete it.
pkg_rolling-replace stopped at glib2, which is a big package, saying that
On Monday, May 07, 2012 08:56:29 Pierre Abbat wrote:
orc is required by gst-plugins0.10-base, which is required by swfdec, which
isn't required by anything. I'm going to remove it and see what happens.
orc turned out to be required by a bunch of KDE programs.
=== Building for coreutils-8.13
On Wednesday, May 02, 2012 22:02:18 Justin Sherrill wrote:
My preferred method, when binary packages aren't available, is to
update /usr/pkgsrc to the appropriate release and then use
pkg_rolling-replace to upgrade the packages I use. It'll take a
little bit to build programs, but the amount
On Sunday, May 06, 2012 13:17:39 Justin Sherrill wrote:
When packages get name changes, there's no automated way to
transition. I assume what happened is postfix-current became postfix
and some of the KDE packages were renamed. Looking at the kde4
meta-package, I don't see any of those
I ran into a snag. I ran pkg_rolling-replace -u -D MAKE_JOBS=3 a few times. I
ran into a backup program with a license it didn't like; since I'm not using
it, I removed it. Then I ran into this:
rr x11/xfontsel - xfontsel-1.0.2nb1 xfontsel-1.0.2nb2
rr x11/xlogo - xlogo-1.0.2 xlogo-1.0.2nb1
rr
On Tuesday, May 01, 2012 21:06:14 Justin Sherrill wrote:
Are you asking about doing a full bulk build of all the packages, or
adding/upgrading packages on your system?
Both. I'd like to upgrade the packages on my system, but I don't want a long
time when the packages installed are partly old
On Tuesday, May 01, 2012 09:30:50 Justin Sherrill wrote:
On Tue, May 1, 2012 at 9:20 AM, Justin Sherrill
jus...@shiningsilence.com wrote:
I'd advise building from source instead of waiting for binaries at
this point for 2012Q1.
How long does it take to build from source, and how much disk
On Tuesday, May 01, 2012 15:26:04 Justin Sherrill wrote:
On Tue, May 1, 2012 at 2:50 PM, Pierre Abbat p...@phma.optus.nu wrote:
If everything goes well, maybe a week and 50G, though I haven't
tracked disk usage over the whole history of the build.
It never goes well. Disks fill from hammer
Something just rattled the disk for several minutes in a row. I don't know
what it was. I have some cron jobs, but those don't take more than a few
seconds, except the nightly hammer run, and I know when that is. I ended up
killing the process taking up the most memory, which turned out to be a
I got a reply in my inbox with a copy sent to the list, but I don't have the
copy sent to the list yet.
Pierre
--
lo ponse be lo mruli po'o cu ga'ezga roda lo ka dinko
Do you know when the packages for 2012Q1 will be available?
Pierre
--
sei do'anai mi'a djuno puze'e noroi nalselganse srera
On Wednesday, April 04, 2012 15:57:34 David Crosswell wrote:
Get a better client.
This was sent with the 'Reply List' feature in Ice-Dove.
This app. may not be available in DFly, but there must be others.
Regards,
I use Kmail, which also has Reply to List. It has been available off and on in
On Wednesday, March 28, 2012 22:39:22 Justin Sherrill wrote:
The people this would inconvenience is anyone upgrading from 3.0.1 or
3.0.2 to 3.0.3; your binary package target would change to a newer
release, so you would end up needing to upgrade your pkgsrc software,
if you're installing with
On Tuesday, March 20, 2012 21:33:33 Venkatesh Srinivas wrote:
Hi,
bitcoind works fine on DragonFly; you just need to modify
makefile.unix appropriately; I'll post an updated makefile in a day or
so. Basically, you need to set the pkgsrc paths correctly and modify a
few small things wrt
I'd like to run bitcoin. I have a Linux laptop with a working bitcoin install,
but I'd rather not keep my main wallet on my laptop, so I'd like to run
bitcoin on my DFly desktop. So I gitted it from
git://github.com/bitcoin/bitcoin.git and tried to compile. I got two
completely different
Here's my latest try: I ran man psm and found that there are three
operation levels which return different formats. In level 0, the mouse driver
does not return scroll wheel information; in level 1, it does. There does not
appear to be a command to change the operation level. I'm going to write
On Wednesday, March 14, 2012 15:19:16 Chris Turner wrote:
This is probably overkill. Also, moused has an '-l' flag for this
For reference - alot of the mouse documentation is somewhat 'cruft'
from the MS/DOS PC-AT era and various nonstandard serial port drivers -
for the most part things
I get The root certificate authority's certificate is not trusted for this
purpose. Is anyone else getting this?
Pierre
--
La sal en el mar es más que en la sangre.
Le sel dans la mer est plus que dans le sang.
On Wednesday, March 14, 2012 16:42:58 Antonio Huete Jiménez wrote:
Hi Pierre,
Certificate for https://bugs.dragonflybsd.org was obtained in
https://www.startssl.com/. They were tested against Opera 11, Firefox 10,
Chrome and IExplore 8-9 without issues.
Also, they (StartSSL) claim they got
I tried to send a signed message in Kmail, which hung. I looked at top and
found some curses program was trying to read the password. Instead of killing
it, I tried to look at virtual console 1. I saw F1 DF/BSD and the computer
proceeded to reboot. There was no kernel dump. How do I figure out
On Saturday, March 10, 2012 16:20:44 Chris Turner wrote:
However - if your signing setup in any way involves 3.0+ and a
gpg-agent running as root - you might want to update from source
to latest master-or-3.0 patch branch before digging since there
are known issues with gpg-agent running as
I just rebooted ('cause I recompiled the kernel the other day) and restarted
KDE. When I do this on DFly and run top, the load average is about 1.5. When I
do it on Linux, the load average shoots up to 11 or 20 or higher. In both
OSes, the computer is slow to respond and makes lots of disk
How hard would it be to port DragonFly to the ARM and run it on a Raspberry
Pi?
Pierre
--
ve ka'a ro klaji la .romas. se jmaji
I'm profiling a program so that I can optimize it and hopefully get it to run
in real time. Here's
the profile of the program running under Linux:
Flat profile:
Each sample counts as 0.01 seconds.
% cumulative self self total
time seconds secondscalls
Do you know where to get the dircolors program? I copied my bashrc from my
Linux box and it has this code:
# enable color support of ls and also add handy aliases
if [ $TERM != dumb ]; then
#eval `dircolors -b`
alias ls='ls -G'
#alias dir='ls --color=auto --format=vertical'
I'm working on a program and I want to see how much time it's spending in each
function. So I edit the CMakeCache and add the -pg flag:
//Flags used by the compiler during debug builds.
CMAKE_CXX_FLAGS_DEBUG:STRING=-ggdb -pg
I then run cmake and make and get this:
[ 50%] Building CXX object
I was copying something from a webpage to a document in Kate and the computer
froze, then showed me the console saying that X could not be restarted. I
killed kdm and logged in again. While all the windows were coming up, the
computer turned itself off. I rebooted and found a dump numbered 12.
On Friday, February 17, 2012 00:38:41 Samuel J. Greear wrote:
I don't know if it [KDE] installed completely in 2.10, come to think of
it.
The KDE versions in pkgsrc are grossly out of date. Users should actually
have better luck compiling newer KDE version by hand from the KDE repo's
I tried to start a new X session using switch user in KDE. I got no kdm
prompt; X failed to start, and in its log file I found (WW) xf86OpenConsole:
VT_ACTIVATE failed. I then logged on to a console and tried startx. That
worked, but got me a bare X screen with an xterm, which isn't what I
On Saturday, February 11, 2012 00:30:40 Thomas Nikolajsen wrote:
panic: assertion m-wire_count 0 failed in pmap_unwire_pte at
/usr/src/sys/platform/pc32/i386/pmap.c:1091
This seems to match issue 2296 (panic: assertion m-wire_count 0
failed).
What was you doing on your computer when
Here are the backtraces (?):
Unread portion of the kernel message buffer:
panic: assertion m-wire_count 0 failed in pmap_unwire_pte at
/usr/src/sys/platform/pc32/i386/pmap.c:1091
cpuid = 1
Trace beginning at frame 0xd356bab0
panic(,1,c067fe44,d356bae4,cc997a60) at panic+0x19e 0xc03839b3
I had an email that I was writing to a few people. The computer rebooted
itself. I restarted Kmail and found the message window empty. I cd'ed into the
directory where it keeps autosaved copies of email being composed and found
that it had been overwritten with zero bytes. Fortunately I could
My computer rebooted itself again. (I'm pretty sure now it's a bug in hammer,
from the time when it does it and the left periodic.cunsolerfu files.) I typed
in the disk password, then it finished booting except for X, which failed to
start. I removed the stale lockfile, killed kdm, logged into
On Thursday, February 02, 2012 04:08:53 Chris Turner wrote:
On Thu, Feb 02, 2012 at 12:47:57AM -0500, Pierre Abbat wrote:
Also, when Kmail started, Akonadi complained about not being able to
register with dbus. I thus have to write this on the Linux box. How do I
fix it?
I think
On Thursday, February 02, 2012 08:48:19 8 Tail wrote:
Never really used a Mailing List before. Also is this the appropriate
venue to ask beginner questions about this OS and installation? Thanks.
Welcome to DragonFly! You want to odon8 your computer?
Pierre
--
Don't buy a French car in
I have a printer connected to chausie, my Linux box, and shared with CUPS.
When I print something on chausie, it defaults to A4. When I print something
on darner, it defaults to Letter, whether I'm printing from a KDE program or
something else like Aurora, and I have to change it to A4. Here
On Thursday, February 02, 2012 15:35:58 Chris Turner wrote:
On 02/02/12 14:00, Pierre Abbat wrote:
paperconf outputs a4. Since both are set to A4, why do the apps insist
on defaulting to Letter?
Because it is the 1 true paper size :D
j/k even though from the usa I prefer a4 anyhow
My computer just rebooted three times. First it was running the nightly job,
either hammer or pkg-admin (I don't know which since I wasn't running top).
Then it rebooted while I was doing nothing in particular. Then it rebooted a
third time and X failed to come up. I had to reboot it again to
On Sunday, January 29, 2012 00:49:37 c.turner wrote:
Did you ever figure this out? it seems I have run into the problem,
and alas, it is not so simple since it touches the mess of
dbus/gconf/hal/ which I have deliberately avoided learning until now :D
I didn't, and I've been happily using kate
My computer rebooted while I was browsing a website and left no kernel dump.
How can I figure out what happened?
Pierre
--
li fi'u vu'u fi'u fi'u du li pa
On Friday, January 27, 2012 15:21:08 Justin Sherrill wrote:
I just put these together. It's RCa because I haven't even tested
these in a VM yet, so hopefully they are... bootable? The next ones,
if made, will be 3.0-RCb. Please test, file bugs, you know what to
do.
I don't have a spare
I pulled the latest to fix the setitimer bug and made quickworld. While I was
doing that, the kernel panicked (though it may have been caused by some web
browsing). I resumed quickworld, but I got an error, so I'm making buildworld.
If that fails, is it OK to build and install just the kernel,
On Sunday, January 22, 2012 04:13:18 Thomas Nikolajsen wrote:
I just opened bug 2279 (make -j 3 buildkernel fails on UP) which seems
like
A fix was committed, please test latest master.
make -j 2 buildkernel succeeds.
Pierre
--
gau do li'i co'e kei do
On Thursday, January 26, 2012 00:06:50 Romick wrote:
From: Pierre Abbat p...@phma.optus.nu
Subject: Re: X reboot
Date: Wed, 25 Jan 2012 23:24:38 -0500
On Wednesday, January 25, 2012 17:09:30 Romick wrote:
Hello,
If you have intel video then you can try edit /etc/X11/xorg.conf
On Wednesday, January 25, 2012 11:47:09 YONETANI Tomokazu wrote:
On Tue, Jan 24, 2012 at 05:20:44PM -0500, Pierre Abbat wrote:
I have a bug report (starting X causes reboot) in which I gave a date but
not an exact version, and I've been asked to check out the latest code
and see if it fixes
On Wednesday, January 25, 2012 17:09:30 Romick wrote:
Hello,
If you have intel video then you can try edit /etc/X11/xorg.conf :
Section Device
Identifier devname
Driver intel
...
Option DRI False
EndSection
That worked.
On Wednesday, January 25, 2012 14:22:50 Matthias Rampke wrote:
Ooops, forgot to add users@ again. For the record, here's the core bit:
You don't need to add users@. Just hit the reply-to-list button. I'm on the
list, so I don't need a reply in my inbox, just the one in the list folder.
Pierre
I have a bug report (starting X causes reboot) in which I gave a date but not
an exact version, and I've been asked to check out the latest code and see if
it fixes an unrelated bug (make -j2 buildkernel). What git command can I use
before checking out so that you can reproduce the first bug?
On Wednesday, January 18, 2012 03:28:07 Thomas Nikolajsen wrote:
I just opened bug 2279 (make -j 3 buildkernel fails on UP) which seems like
the same issue (http://bugs.dragonflybsd.org/issues/2279).
Does buildkernel work without '-j' ?
Is this an UP system (ncpu=1)?
ncpu=2, the config is
CCVER=gcc44 BINUTILSVER=binutils221 OBJFORMAT_PATH=/
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/pkg/bin cc -O -pipe -nostdinc -
I/usr/include -I. -I/usr/src/sys/dev/disk/aic7xxx/aicasm -std=gnu99 -Wsystem-
headers -Werror -Wall -W -Wno-unused-parameter -Wstrict-prototypes -Wmissing-
prototypes
bash-4.2$ ssh -Y chausie
Warning: No xauth data; using fake authentication data for X11 forwarding.
Last login: Mon Jan 16 05:23:37 2012
phma@chausie:~$ kooka
[1] 2822
phma@chausie:~$ Xlib: connection to localhost:10.0 refused by server
Xlib: Invalid MIT-MAGIC-COOKIE-1 key
kooka: cannot connect to
On Monday, January 16, 2012 12:33:03 Chris Turner wrote:
On 01/16/12 11:21, Pierre Abbat wrote:
Warning: No xauth data; using fake authentication data for X11
forwarding.
^ this is the problem
Make sure that your DISPLAY is correct on this box, and that X clients can
connect to your X
1 - 100 of 409 matches
Mail list logo
