Then that's your problem. Smsbox doesn't resend the same MT under no
circumstance and no configuration option.
I think it is high time this thread terminates.
BR,
Nikos - (not Nikkos)
- Original Message -
From: dafodil neo.tu...@yahoo.com
To: users@kannel.org
Sent: Monday, October 11,
Hi,
You cannot use it that way. openSMPPbox is an SMPP proxy. It connects to
bearerbox as another smsbox, but it cannot connect to directly to smsbox.
You can connect an SMPP client (ie ESME - another bearerbox) to it, and it
will forward SMS to bearerbox for routing to an smsc.
HTH,
Nikos
Hi Nikos,
Thanks for ur time.
i just wonder how it happens.any way i will check with this.
Br
daf
Nikos Balkanas wrote:
Then that's your problem. Smsbox doesn't resend the same MT under no
circumstance and no configuration option.
I think it is high time this thread terminates.
BR,
Hi List,
I understand that sms is through store/foreward where as ussd is session
based.is it possible to send ussd and sms to short code through kannel.i
have browsed many archives where people have submitted patches so that
kannel can send ussd.so far my understaning is concerned.
To send USSD
Normal way would be to use 2 bbs. Fancy way would be to use a single one,
but for what purpose? You would end up with an infinite loop. The idea is to
be able to connect transparently other SMPP clients to your infrastructure
and appear as another aggregator.
BR,
Nikos
- Original Message
Hi,
No need to to submit any patch for USSD. Configuring ussd_service_op is just
enough. Then you should take care of the sessions, for which kannel is not
responsible. All that should be done in application side, differentiating
the sessions while users access the ussd application in paralel.
(Please use list)
I don't understand AO-AT. You can get infinite loop if you use careless
routing:
smsbox - bb - SMSc
smppbox--smppbox
If you just want to send SMS to SMSc, you don't need smppbox. If you route
SMS to smppbox, and smppbox connects to same bb, it will feed again the SMS
Hi
We have had a couple of scenarios where a smsc that we are sending to
suddenly goes offline. We don't want to flood our bearerbox with SMS so we
only give it up to 400. When the smsc goes down we continue to try send to
that bind until the bearerbox queue is at about 400 then it stops and we
Thanks for the reply.
can u explain on this
All that should be done in application side, differentiating
the sessions while users access the ussd application in paralel.
thanks once agian for ur time.
Br daf
elthox wrote:
Hi,
No need to to submit any patch for USSD. Configuring
Ok I understand a little more,
Is it relevant if I use only one bearerbox and configure this bearerbox to
be a client, to connect to smppbox using smsc = smpp ? Then add a routing ?
Or do I have to use 2 differents bearerbox for this like you advise?
Emmanuel
2010/10/11 Nikos Balkanas
Hi,
I imagine you specify the SMSc in your sendsms URL and force routing by
allowed-smsc-id and denied-smsc-id. You can change these configuration
variables to preferred-smsc-id instead of allowed (skip denied altogether),
restart bb to reload configuration and bb will load-balance queue to
You stated yourself in the first post. USSD is based on sessions. So these
sessions should be managed by application until network (time out, usually 3
or 5 minutes) or user releases it (when he/she interrupts the dialog).
For every initial incoming/outgoing request, originated by subscriber (or
Hi Nikos
Yes, you are correct. Terribly sorry for leaving out that vital piece of
information.
Would this also work if we had the following situation:
Bind to SMSC A goes down.
Queue builds up to SMSC A.
We stop processing.
Reroute all SMSC A traffic to SMSC B only.
We are quite specific about
Understood... so I need a second bearerbox to do AO-AT ie Application
Originated (smpp client 1) - Application terminated (smpp client 2)
I tought smppbox could forward from one client to another but it can not, it
forward all SMS to bearerbox that routes SMS.
Thanks,
Emmanuel
2010/10/11 Nikos
BB doesn't loose any SMS in queue (except maybe the 1 processing when you
shutdown - shutdown when low traffic). You can reroute to any smsc you
desire. But you will have to restart bb to reload config.
BR,
Nikos
- Original Message -
From: brett skinner
To: Users
Sent: Monday,
Thanks for the info Nikos.
2010/10/11 Nikos Balkanas nbalka...@gmail.com
BB doesn't loose any SMS in queue (except maybe the 1 processing when you
shutdown - shutdown when low traffic). You can reroute to any smsc you
desire. But you will have to restart bb to reload config.
BR,
Nikos
Nope. BB is an SMPP client and can send only to an SMPP server. If your
applications are clients, you cannot connect to them with bb. SMPPbox cannot
help you either, because it cannot route between 2 SMPP clients.
You may be able to connect both applications to SMPPbox and then use either
the
Thanks for the detail.MSISDN helps for correlation.
Let me know if i m not misleading u.
I am on my pc connected to modem and kannel is up and running.
i wan to to initiate USSD.
can it be over GSM(using my gsm modem and not GPRS/internet)
or it can be only over HTTP/GPRS.
can u pls give a
I think you dont have the needed infrastructure for developing USSD
application. Kannel needs to connect to USSDC through SMPP. In your case you
are using modem which is not relevant in this case.
On Mon, Oct 11, 2010 at 11:06 AM, dafodil neo.tu...@yahoo.com wrote:
Thanks for the detail.MSISDN
To clarify about the solution to use 2 BB is it possible?
I don't understand in your last mail if you talk about fancy way or normal
way, or if it is not possible at all to do AO-AT routing :s
Regards,
Emmanuel
2010/10/11 Nikos Balkanas nbalka...@gmail.com
Nope. BB is an SMPP client and can
Nope. I am not talking about either solution. I am describing a new
approach. You will need 1 bb and 1 smppbox. Connect both apps to smppbox,
and smppbox to bearerbox. Then send to loopback smsc or http smsc for MT2MO
redirection. Specify with an smsbox-route rule that all incoming MO from
OK will try this new approach
Thanks Nikos,
Emmanuel
2010/10/11 Nikos Balkanas nbalka...@gmail.com
Nope. I am not talking about either solution. I am describing a new
approach. You will need 1 bb and 1 smppbox. Connect both apps to smppbox,
and smppbox to bearerbox. Then send to loopback
Hi,
Thanks for pointing me in the right direction. I have a question about
a behavior I am seeing from the bearerbox. Let me know if this is
better suited for the dev mailing list.
# I receive a message like this from the bearerbox (initially sent by
the fakesmsc):
00B1 0002 0003
It seems to work very well and even if I use smsbox (cgi script) SMS is
forwarded to opensmppbox using smsbox-route, bearerbox does not send back to
the originated box.
One question is it possible to create 2 smsc loopback ? in order to be able
to send SMS from
Application 1 - Application 2
Yeap. It behaves like any other smsc. Just use different smsc-ids.
BR,
Nikos
- Original Message -
From: Emmanuel CHANSON
To: Nikos Balkanas
Cc: users
Sent: Tuesday, October 12, 2010 1:07 AM
Subject: Re: smsbox to opensmppbox routing
It seems to work very well and even if I use smsbox
Hi,
You have truncated logs, so I will have to take a wild guess about it. It
would seem that you received the SMS with fakesmsc client, which replies to
bb with its own ACK. At that point bb deletes the original SMS. So, when you
send in your own ACK, bb can no longer find the original SMS.
Is that true when the message is originating in the fakesmsc?
My setup is:
[fakesmsc] - [bearerbox] - [something like the smsbox]
I'm sending a message from the fakesmsc using the command:
./test/fakesmsc -H 127.0.0.1 -r 2 -m 1 123 345 text nop
Which yields the following the bearerbox
Sorry. I realized I was working from an out-of-date version of
gw/msg-decl.h. I was missing some components of the message.
Thanks,
Garth
On Mon, Oct 11, 2010 at 3:46 PM, Garth Patil garthpa...@gmail.com wrote:
Is that true when the message is originating in the fakesmsc?
My setup is:
Ok here I got a problem,
For understanding below the purpose and test conditions:
Purpose of the test: I need to send SMS from smsbox cgi script to 1 smpp
application.
For this I have smsbox --- sqlbox (not mandatory here) --- bearerbox
I have configured 2 smscs:
*group = smsc
smsc = loopback
One more question,
Is loopback SMS able to handle DLRs ?
I dont see anything about this in user guide.
I made test and DLRs are not sent to smsbox in order to trigg DLR-URL
Emmanuel
2010/10/12 Emmanuel CHANSON emmanuelchan...@gmail.com
Ok here I got a problem,
For understanding below the
Greetings,
I am able to send the OTA Settings Message by using Kannel and UserPin has
been used , But i want to use Netwpin (Imsi No) .
I had already verified my IMSI no and it is ok . It has 15 digit .
After reading and searching i came to know that we should provide Netwpin as
Hi elthox,
thanks for ur time.
what i need to have for ussd or short code exchage apart from kannel.
can u pls give me some pointer on that.
Br
daf
elthox wrote:
I think you dont have the needed infrastructure for developing USSD
application. Kannel needs to connect to USSDC through SMPP.
32 matches
Mail list logo