Hi I think it is not a kannel issue but your drivers. I had a very similar problem with an USB Enfora GSM modem where the dmesg and /var/log/messages shows that the device was mounted when in reality it wasn´t .. or at least not completely. Have you tried to access it with minicom or wdial?? Regards Alvaro
-----Mensaje original----- De: sri ganeshan [mailto:[EMAIL PROTECTED] Enviado el: Martes, 13 de Marzo de 2007 01:20 Para: users@kannel.org Asunto: kannel with bluetooth hi all, im using kannel as an sms gateway,with my sony ericcson k700i.all these days i worked connecting my phone to my laptop through a USB datacable.so my device variable was /dev/ttyUSB0.but now i want to connect my phone through bluetooth!but when i plug the bluetooth dongle to my ubuntu machine and start bluetooth and type dmesg | tail on my terminal i don't get any port as rfcomm0. this is the message i get on the terminal [17179621.092000] Bluetooth: RFCOMM socket layer initialized [17179621.092000] Bluetooth: RFCOMM TTY layer initialized [17179621.092000 ] Bluetooth: RFCOMM ver 1.7 [17184005.220000] usb 2-2: new full speed USB device using uhci_hcd and address 2 [17184015.388000] usb 2-2: configuration #1 chosen from 1 choice [17184016.344000] Bluetooth: HCI USB driver ver 2.9 [17184016.344000] usbcore: registered new driver hci_usb [17188738.296000] usb 2-2: USB disconnect, address 2 [17189231.952000] usb 2-2: new full speed USB device using uhci_hcd and address 3 [17189242.120000 ] usb 2-2: configuration #1 chosen from 1 choice when i try to start kannel with the device=/dev/rfcomm0 it says device not found.but whn i scan using hcitool scan i get this message.that the phone is detected/ Scanning ... 00:0F:DE:73:A3:5C K700i can some one help me setup kannel with bluetooth regards sri
