Re: Kannel and Huawei EC167 and EC156 failed to reponse to AT+CPIN=? command

[Alvaro Cornejo]

Hi

Always cc the list so you can receive feedback from more people and others
can benefit from this info.

You can alway hack kannel code and change that setup.

Regards,

Alvaro

|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS
y GPRS online
  Visitenos en www.perusms.com

On Wed, Jun 15, 2016 at 9:01 AM, Paul Isidore 
wrote:

> Thank you very much,
> Now I remark my modem accept only PDU text mode (AT+CMGF=1) but Kannel
> want to set it to PDU Mode (AT+CMGF=0 in log) and make Error message .
> Are there a  solution to change this behaviour ?
> I don't see anything like no-cmgf or cmgf=1 in config file description.
>
> Thank you
> Cordialy,
>
> Paul Isidore
>
> Log file:
> 2016-06-15 13:48:53 [1747] [6] DEBUG: AT2[huawei]: device opened
> 2016-06-15 13:48:53 [1747] [6] INFO: AT2[huawei]: Logging in
> 2016-06-15 13:48:53 [1747] [6] INFO: AT2[huawei]: init device
> 2016-06-15 13:48:53 [1747] [6] INFO: AT2[huawei]: speed set to 9600
> 2016-06-15 13:48:54 [1747] [6] DEBUG: AT2[huawei]: --> ATZ^M
> 2016-06-15 13:48:54 [1747] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-15 13:48:54 [1747] [6] DEBUG: AT2[huawei]: --> AT^M
> 2016-06-15 13:48:54 [1747] [6] DEBUG: AT2[huawei]: <-- AT
> 2016-06-15 13:48:54 [1747] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-15 13:48:54 [1747] [6] DEBUG: AT2[huawei]: --> AT^M
> 2016-06-15 13:48:54 [1747] [6] DEBUG: AT2[huawei]: <-- AT
> 2016-06-15 13:48:54 [1747] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-15 13:48:54 [1747] [6] DEBUG: AT2[huawei]: --> ATE0^M
> 2016-06-15 13:48:54 [1747] [6] DEBUG: AT2[huawei]: <-- ATE0
> 2016-06-15 13:48:54 [1747] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-15 13:48:54 [1747] [6] DEBUG: AT2[huawei]: --> AT+IFC=2,2^M
> 2016-06-15 13:48:54 [1747] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-15 13:48:54 [1747] [6] DEBUG: AT2[huawei]: --> AT+CMGF=0^M
> 2016-06-15 13:48:54 [1747] [6] DEBUG: AT2[huawei]: <-- ERROR
> 2016-06-15 13:48:54 [1747] [6] ERROR: AT2[huawei]: Generic error: ERROR
> 2016-06-15 13:48:54 [1747] [6] ERROR: AT2[huawei]: Initialization of
> device failed.
> 2016-06-15 13:48:54 [1747] [6] INFO: AT2[huawei]: Closing device
> 2016-06-15 13:48:54 [1747] [6] ERROR: AT2[huawei]: Couldn't connect
> (retrying in 10 seconds).
>
>
>
> --
> *De :* Alvaro Cornejo 
> *Envoyé :* mercredi 15 juin 2016 13:25
>
> *À :* Paul Isidore
> *Cc :* users@kannel.org
> *Objet :* Re: Kannel and Huawei EC167 and EC156 failed to reponse to
> AT+CPIN=? command
>
> Hi
>
> The message is clear. You modem does not support the AT+CSCA command.
> Remove it from config.
>
> In most cases, smsc center is configured automatically by the operator
> through the sim card and sim initialization. Therefore you shouldn't need
> to configure it.
>
> Regards,
>
> Alvaro
>
>
> |-|
> Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
> celular y Nextel
> en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS
> y GPRS online
>   Visitenos en www.perusms.com
>
> On Tue, Jun 14, 2016 at 6:26 PM, Paul Isidore 
> wrote:
>
>> Hi,
>>
>> Indeed, I take the CPIN command config modem and this time I get a new
>> error message about attaching the smsc center number, i also try the
>> no-smsc to circumvent this but still get this new error message. (While
>> both modem sends and receive sms on Windows 8.1).
>>
>>
>> Best regards,
>>
>>
>> Here is a copy of the log file:
>>
>> 2016-06-14 22:55:07 [1760] [7] DEBUG: Thread 7
>> (gw/bb_smscconn.c:sms_router) maps to pid 1760.
>> 2016-06-14 22:55:07 [1760] [6] INFO: AT2[huawei]: trying to use speed
>> <9600> from modem definition
>> 2016-06-14 22:55:07 [1760] [6] INFO: AT2[huawei]: opening device
>> 2016-06-14 22:55:07 [1760] [0] INFO: Loading store file
>> `/var/log/kannel/kannel.store'
>> 2016-06-14 22:55:07 [1760] [0] INFO: Store-file size 0, starting to unpack
>> 2016-06-14 22:55:07 [1760] [0] INFO: Retrieved 0 messages,
>> non-acknowledged messages: 0
>> 2016-06-14 22:55:07 [1760] [6] DEBUG: AT2[huawei]: device opened. Telnet
>> mode = 0
>> 2016-06-14 22:55:07 [1760] [0] DEBUG: Started thread 8
>> (gw/bb_store_file.c:store_dumper)
>> 2016-06-14 22:55:07 [1760] [0] INFO: MAIN: Start-up done, entering
>> mainloop
>> 2016-06-14 22:55:07 [1760] [0] DEBUG: AT2[huawei]: start called
>> 2016-06-14 22:55:07 [1760] [8] DEBUG: Thread 8
>> (gw/bb_store_file.c:store_dumper) maps to pid 1760.
>> 2016-06-14 22:55:07 [1760] [8] DEBUG: Dumping 0 messages to store
>> 2016-06-14 22:55:08 [1760] [6] DEBUG: AT2[huawei]: device opened
>> 2016-06-14 22:55:08 [1760] [6] INFO: 

Re: Kannel and Huawei EC167 and EC156 failed to reponse to AT+CPIN=? command

[Alvaro Cornejo]

Hi

The message is clear. You modem does not support the AT+CSCA command.
Remove it from config.

In most cases, smsc center is configured automatically by the operator
through the sim card and sim initialization. Therefore you shouldn't need
to configure it.

Regards,

Alvaro

|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS
y GPRS online
  Visitenos en www.perusms.com

On Tue, Jun 14, 2016 at 6:26 PM, Paul Isidore 
wrote:

> Hi,
>
> Indeed, I take the CPIN command config modem and this time I get a new
> error message about attaching the smsc center number, i also try the
> no-smsc to circumvent this but still get this new error message. (While
> both modem sends and receive sms on Windows 8.1).
>
>
> Best regards,
>
>
> Here is a copy of the log file:
>
> 2016-06-14 22:55:07 [1760] [7] DEBUG: Thread 7
> (gw/bb_smscconn.c:sms_router) maps to pid 1760.
> 2016-06-14 22:55:07 [1760] [6] INFO: AT2[huawei]: trying to use speed
> <9600> from modem definition
> 2016-06-14 22:55:07 [1760] [6] INFO: AT2[huawei]: opening device
> 2016-06-14 22:55:07 [1760] [0] INFO: Loading store file
> `/var/log/kannel/kannel.store'
> 2016-06-14 22:55:07 [1760] [0] INFO: Store-file size 0, starting to unpack
> 2016-06-14 22:55:07 [1760] [0] INFO: Retrieved 0 messages,
> non-acknowledged messages: 0
> 2016-06-14 22:55:07 [1760] [6] DEBUG: AT2[huawei]: device opened. Telnet
> mode = 0
> 2016-06-14 22:55:07 [1760] [0] DEBUG: Started thread 8
> (gw/bb_store_file.c:store_dumper)
> 2016-06-14 22:55:07 [1760] [0] INFO: MAIN: Start-up done, entering mainloop
> 2016-06-14 22:55:07 [1760] [0] DEBUG: AT2[huawei]: start called
> 2016-06-14 22:55:07 [1760] [8] DEBUG: Thread 8
> (gw/bb_store_file.c:store_dumper) maps to pid 1760.
> 2016-06-14 22:55:07 [1760] [8] DEBUG: Dumping 0 messages to store
> 2016-06-14 22:55:08 [1760] [6] DEBUG: AT2[huawei]: device opened
> 2016-06-14 22:55:08 [1760] [6] INFO: AT2[huawei]: speed set to 9600
> 2016-06-14 22:55:08 [1760] [6] DEBUG: AT2[huawei]: --> ^M
> 2016-06-14 22:55:10 [1760] [6] DEBUG: AT2[huawei]: --> AT^M
> 2016-06-14 22:55:10 [1760] [6] DEBUG: AT2[huawei]: <-- AT
> 2016-06-14 22:55:10 [1760] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 22:55:10 [1760] [6] INFO: AT2[huawei]: Closing device
> 2016-06-14 22:55:10 [1760] [6] INFO: AT2[huawei]: speed is 9600
> 2016-06-14 22:55:10 [1760] [6] INFO: AT2[huawei]: opening device
> 2016-06-14 22:55:10 [1760] [6] DEBUG: AT2[huawei]: device opened. Telnet
> mode = 0
> 2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: device opened
> 2016-06-14 22:55:11 [1760] [6] INFO: AT2[huawei]: Logging in
> 2016-06-14 22:55:11 [1760] [6] INFO: AT2[huawei]: init device
> 2016-06-14 22:55:11 [1760] [6] INFO: AT2[huawei]: speed set to 9600
> 2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: --> ATZ^M
> 2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: <-- ATZ
> 2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: --> AT^M
> 2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: <-- AT
> 2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: --> AT^M
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- AT
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: --> ATE0^M
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- ATE0
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: --> AT+IFC=2,2^M
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: -->
> AT+CSCA="+XX"^M
> 2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- COMMAND NOT SUPPORT
> 2016-06-14 22:55:14 [1760] [0] WARNING: Killing signal or HTTP admin
> command received, shutting down...
> 2016-06-14 22:55:14 [1760] [0] DEBUG: Shutting down Kannel...
> 2016-06-14 22:55:14 [1760] [0] DEBUG: shutting down smsc
> 2016-06-14 22:55:14 [1760] [0] DEBUG: AT2[huawei]: Shutting down SMSCConn,
> slow
> 2016-06-14 22:55:14 [1760] [0] DEBUG: shutting down udp
> 2016-06-14 22:55:16 [1760] [6] ERROR: AT2[huawei]: Initialization of
> device failed.
> 2016-06-14 22:55:16 [1760] [6] INFO: AT2[huawei]: Closing device
> 2016-06-14 22:55:16 [1760] [6] INFO: AT2[huawei]: Closing device
> 2016-06-14 22:55:16 [1760] [7] DEBUG: Thread 7
> (gw/bb_smscconn.c:sms_router) terminates.
> 2016-06-14 22:55:16 [1760] [4] DEBUG: Thread 4
> (gw/bb_boxc.c:sms_to_smsboxes) terminates.
> 2016-06-14 22:55:16 [1760] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run)
> terminates.
>
>
> --
> *De :* Alvaro Cornejo 
> *Envoyé :* mardi 14 juin 

RE: Kannel and Huawei EC167 and EC156 failed to reponse to AT+CPIN=? command

[Paul Isidore]

Hi,

Indeed, I take the CPIN command config modem and this time I get a new error 
message about attaching the smsc center number, i also try the no-smsc to 
circumvent this but still get this new error message. (While both modem sends 
and receive sms on Windows 8.1).


Best regards,


Here is a copy of the log file:

2016-06-14 22:55:07 [1760] [7] DEBUG: Thread 7 (gw/bb_smscconn.c:sms_router) 
maps to pid 1760.
2016-06-14 22:55:07 [1760] [6] INFO: AT2[huawei]: trying to use speed <9600> 
from modem definition
2016-06-14 22:55:07 [1760] [6] INFO: AT2[huawei]: opening device
2016-06-14 22:55:07 [1760] [0] INFO: Loading store file 
`/var/log/kannel/kannel.store'
2016-06-14 22:55:07 [1760] [0] INFO: Store-file size 0, starting to unpack
2016-06-14 22:55:07 [1760] [0] INFO: Retrieved 0 messages, non-acknowledged 
messages: 0
2016-06-14 22:55:07 [1760] [6] DEBUG: AT2[huawei]: device opened. Telnet mode = 0
2016-06-14 22:55:07 [1760] [0] DEBUG: Started thread 8 
(gw/bb_store_file.c:store_dumper)
2016-06-14 22:55:07 [1760] [0] INFO: MAIN: Start-up done, entering mainloop
2016-06-14 22:55:07 [1760] [0] DEBUG: AT2[huawei]: start called
2016-06-14 22:55:07 [1760] [8] DEBUG: Thread 8 
(gw/bb_store_file.c:store_dumper) maps to pid 1760.
2016-06-14 22:55:07 [1760] [8] DEBUG: Dumping 0 messages to store
2016-06-14 22:55:08 [1760] [6] DEBUG: AT2[huawei]: device opened
2016-06-14 22:55:08 [1760] [6] INFO: AT2[huawei]: speed set to 9600
2016-06-14 22:55:08 [1760] [6] DEBUG: AT2[huawei]: --> ^M
2016-06-14 22:55:10 [1760] [6] DEBUG: AT2[huawei]: --> AT^M
2016-06-14 22:55:10 [1760] [6] DEBUG: AT2[huawei]: <-- AT
2016-06-14 22:55:10 [1760] [6] DEBUG: AT2[huawei]: <-- OK
2016-06-14 22:55:10 [1760] [6] INFO: AT2[huawei]: Closing device
2016-06-14 22:55:10 [1760] [6] INFO: AT2[huawei]: speed is 9600
2016-06-14 22:55:10 [1760] [6] INFO: AT2[huawei]: opening device
2016-06-14 22:55:10 [1760] [6] DEBUG: AT2[huawei]: device opened. Telnet mode = 0
2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: device opened
2016-06-14 22:55:11 [1760] [6] INFO: AT2[huawei]: Logging in
2016-06-14 22:55:11 [1760] [6] INFO: AT2[huawei]: init device
2016-06-14 22:55:11 [1760] [6] INFO: AT2[huawei]: speed set to 9600
2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: --> ATZ^M
2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: <-- ATZ
2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: <-- OK
2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: --> AT^M
2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: <-- AT
2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: <-- OK
2016-06-14 22:55:11 [1760] [6] DEBUG: AT2[huawei]: --> AT^M
2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- AT
2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- OK
2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: --> ATE0^M
2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- ATE0
2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- OK
2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: --> AT+IFC=2,2^M
2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- OK
2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: --> AT+CSCA="+XX"^M
2016-06-14 22:55:12 [1760] [6] DEBUG: AT2[huawei]: <-- COMMAND NOT SUPPORT
2016-06-14 22:55:14 [1760] [0] WARNING: Killing signal or HTTP admin command 
received, shutting down...
2016-06-14 22:55:14 [1760] [0] DEBUG: Shutting down Kannel...
2016-06-14 22:55:14 [1760] [0] DEBUG: shutting down smsc
2016-06-14 22:55:14 [1760] [0] DEBUG: AT2[huawei]: Shutting down SMSCConn, slow
2016-06-14 22:55:14 [1760] [0] DEBUG: shutting down udp
2016-06-14 22:55:16 [1760] [6] ERROR: AT2[huawei]: Initialization of device 
failed.
2016-06-14 22:55:16 [1760] [6] INFO: AT2[huawei]: Closing device
2016-06-14 22:55:16 [1760] [6] INFO: AT2[huawei]: Closing device
2016-06-14 22:55:16 [1760] [7] DEBUG: Thread 7 (gw/bb_smscconn.c:sms_router) 
terminates.
2016-06-14 22:55:16 [1760] [4] DEBUG: Thread 4 (gw/bb_boxc.c:sms_to_smsboxes) 
terminates.
2016-06-14 22:55:16 [1760] [5] DEBUG: Thread 5 (gw/bb_boxc.c:smsboxc_run) 
terminates.



De : Alvaro Cornejo 
Envoyé : mardi 14 juin 2016 19:29
À : Paul Isidore
Cc : users@kannel.org
Objet : Re: Kannel and Huawei EC167 and EC156 failed to reponse to AT+CPIN=? 
command

Hi

Don't know the solution but here are a couple of workarounds:

If you don't use it that dongle for sms messaging, don't include it in kannel 
config.

Else you can remove CPIN command in your kannel config for that dongle.

Regards

Alvaro

|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier celular 
y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS y 
GPRS online
  Visitenos en www.perusms.com

On Mon, Jun 13, 2016 at 7:59 PM, Paul Isidore 

Re: Kannel and Huawei EC167 and EC156 failed to reponse to AT+CPIN=? command

[Alvaro Cornejo]

Hi

Don't know the solution but here are a couple of workarounds:

If you don't use it that dongle for sms messaging, don't include it in
kannel config.

Else you can remove CPIN command in your kannel config for that dongle.

Regards

Alvaro

|-|
Envíe y Reciba Datos y mensajes de Texto (SMS) hacia y desde cualquier
celular y Nextel
en el Perú, México y en mas de 180 paises. Use aplicaciones 2 vias via SMS
y GPRS online
  Visitenos en www.perusms.com

On Mon, Jun 13, 2016 at 7:59 PM, Paul Isidore 
wrote:

> Hello,
>
>
> I'm newbie and i try to make a SMSC center woth Kannel and one of two
> Huawei dongle Modem (EC167 and EC156)
>
> After doing kannel configuration and run :
>
> sudo bearerbox -v 0 /etc/kannel/kannel.conf
>
>
> i got error SIM CARD not inserted.
>
>
> There is no need to use a SIM card with the USB dongle because i used it
> to connect to internet but i put one in it  and the same error is still
> coming.
>
>
> this is the log file, please help me :
>
>
> 2016-06-14 00:50:05 [8472] [6] INFO: AT2[huawei]: Logging in
> 2016-06-14 00:50:05 [8472] [6] INFO: AT2[huawei]: init device
> 2016-06-14 00:50:05 [8472] [6] INFO: AT2[huawei]: speed set to 9600
> 2016-06-14 00:50:05 [8472] [6] DEBUG: AT2[huawei]: --> ATZ^M
> 2016-06-14 00:50:05 [8472] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 00:50:05 [8472] [6] DEBUG: AT2[huawei]: --> AT^M
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- AT
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: --> AT^M
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- AT
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: --> ATE0^M
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- ATE0
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: --> AT+IFC=2,2^M
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- OK
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: --> AT+CPIN?^M
> 2016-06-14 00:50:06 [8472] [6] DEBUG: AT2[huawei]: <-- +CME ERROR:SIM not
> inserted
> 2016-06-14 00:50:06 [8472] [6] ERROR: AT2[huawei]: Generic error: +CME
> ERROR:SIM not inserted
> 2016-06-14 00:50:06 [8472] [6] ERROR: AT2[huawei]: Initialization of
> device failed.
> 2016-06-14 00:50:06 [8472] [6] INFO: AT2[huawei]: Closing device
> 2016-06-14 00:50:06 [8472] [6] INFO: AT2[huawei]: Closing device
>
>
>