Rahul Sundaram wrote:
It was in the menu before and caused a lot of confusion and bug reports
from users who misunderstood what it meant.
Hmmm, so this is another case where inexperienced users damage long time
users.
Wouldn't it better to have a
Boot normally
Boot and run from RAM
On 04/20/2010 01:00 PM, Roberto Ragusa wrote:
Rahul Sundaram wrote:
It was in the menu before and caused a lot of confusion and bug reports
from users who misunderstood what it meant.
Hmmm, so this is another case where inexperienced users damage long time
users.
Wouldn't it
Hello!
Can anybody help me with zoneminder troubleshooting? I'm using AXIS
M1011 IP cameras and want to move capture format from mjpeg to mpeg4,
because of internet havn't sufficient bandwidth. Mjpeg working fine, but
when I change format to mpeg4 with RTSP and path /mpeg4/media.amp I got:
On Mon, Apr 19, 2010 at 8:39 PM, Jim mickey...@sbcglobal.net wrote:
On 04/19/2010 07:41 PM, Joseph L. Casale wrote:
Yes. If you are willing to edit the BIOS you don't even need GRUB to
boot off different drives. The BIOS on my 3 year old motherboard
allows me to specify the drive (IDE, SATA,
All this methods they are don't working. If you want I can explain.
*Ubuntu Live USB creater* - is an official tool to create Live
USBshttp://en.wikipedia.org/wiki/Live_USBof
Ubuntu http://en.wikipedia.org/wiki/Ubuntu_%28operating_system%29 from the
Live CD or from an iso image
On 04/20/2010 03:32 PM, Alan Holt wrote:
All this methods they are don't working. If you want I can explain.
*Ubuntu Live USB creater* - is an official tool to create Live USBs
http://en.wikipedia.org/wiki/Live_USB of Ubuntu
http://en.wikipedia.org/wiki/Ubuntu_%28operating_system%29 from the
On 04/20/2010 11:04 AM, Nikolay Yatsyshyn wrote:
...
zmc_m3[8961]: FAT [You must have ffmpeg libraries installed to use
remote camera protocol 'rtsp' for monitor 3].
zoneminder was installed from fedora repos and ffmpeg with ffmpeg-libs
was installed from rpmfusion repos.
Reading the source
Mogens Kjaer wrote:
On 04/20/2010 11:04 AM, Nikolay Yatsyshyn wrote:
...
zmc_m3[8961]: FAT [You must have ffmpeg libraries installed to use
remote camera protocol 'rtsp' for monitor 3].
zoneminder was installed from fedora repos and ffmpeg with ffmpeg-libs
was installed from rpmfusion
On 04/20/2010 01:23 PM, Nikolay Yatsyshyn wrote:
...
I have been installed ffmpeg-devel, but it was not helpful. This is
complete log, when I enable camera with mpeg4 profile:
You'll need to recompile zoneminder. You can't use the version of
zoneminder from the fedora repository.
Mogens
--
Yeeah, I will try for sure)) Thanks
2010/4/20 Rahul Sundaram methe...@gmail.com
On 04/20/2010 03:32 PM, Alan Holt wrote:
All this methods they are don't working. If you want I can explain.
*Ubuntu Live USB creater* - is an official tool to create Live USBs
using yum update gets this . libss.so.8
cannot open shared object file, something about python 2.6.2 and gcc
4.4.1. rpm -i libssl.so.8 gets me ...opening failed.
a trip to duke edu says things about this problem not being an error
with the lib but something to do with python.
their
Mogens Kjaer wrote:
On 04/20/2010 01:23 PM, Nikolay Yatsyshyn wrote:
...
I have been installed ffmpeg-devel, but it was not helpful. This is
complete log, when I enable camera with mpeg4 profile:
You'll need to recompile zoneminder. You can't use the version of
Tim:
If you read the reviews of anti-virus software, from time to time, you
will see that none of them are 100% effective. The last review I read
came to the conclusion that the most effective checkers only managed to
find about 60% of the viruses, and not all the same viruses. That is a
On 04/20/2010 02:41 PM, Nikolay Yatsyshyn wrote:
Mogens Kjaer wrote:
On 04/20/2010 01:23 PM, Nikolay Yatsyshyn wrote:
...
I have been installed ffmpeg-devel, but it was not helpful. This is
complete log, when I enable camera with mpeg4 profile:
You'll need to recompile zoneminder.
Hi All,
please help me kindly to reconfig my default GW (Fedora 12).
The GW has 3 active Ethernet cards:
eth0 - connected to Internet ADSL router (incl. VPN, pptpd)
eth1 - not used
eth2 - LAN1
eth3 - LAN2.
I had everything working fine but due to some problems I lost
the configuration of the
On 04/17/2010 07:30 PM, Mark LaPierre wrote:
Hey All,
I can not get my parallel port to connect to my printer. The printer
was working with F8. Then I upgraded to F10. The printer has not
worked since.
Now I have F12 32 bit installed. I've tried everything I can think of
including
On 04/19/2010 08:44 PM, Richard Shaw wrote:
Hopefully someone can tell me definitively if this is a bug or not.
I've been having a lot of trouble getting my CD/DVD printing to work
properly in F12 after having it work perfectly in F11 on my HP
Photosmart C5580. I've re-tweaked the glabels
Mogens Kjaer wrote:
On 04/20/2010 02:41 PM, Nikolay Yatsyshyn wrote:
Mogens Kjaer wrote:
On 04/20/2010 01:23 PM, Nikolay Yatsyshyn wrote:
...
I have been installed ffmpeg-devel, but it was not helpful. This is
complete log, when I enable camera with mpeg4 profile:
On Tue, 2010-04-20 at 15:08 +0300, Alan Holt wrote:
Yeeah, I will try for sure)) Thanks
Which part of Avoid top posting and don't use HTML did you not
understand?
poc
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
On 04/19/2010 08:45:39 PM, Cameron Simpson wrote:
On 19Apr2010 16:52, Geoffrey Leach ge...@hughes.net wrote:
| On 04/19/2010 03:19:49 PM, Mikkel wrote:
| On 04/19/2010 04:08 PM, Geoffrey Leach wrote:
| /usr/bin/gnome-terminal has suddenly started rejecting
| TERM=xterm.
|
| OK, so
My wife just got a new Lexmark X2670 all-in-one printer with her new
laptop that we want to share.
I can't find any drivers for it for F11. Does anyone else have this
printer and if so have you found a way to make it work?
Thanks,
Steve
--
users mailing list
users@lists.fedoraproject.org
To
Hi,
I'm running a couple of computer rooms at the local university for a
total of 40 computers. All of them run fedora.
While we firmly ask our students to turn off the computers when they
leave the rooms, often people forget to do so.
With older versions of Fedora (when HAL was still in
have you reviewed your routing tables?
$ netstat -rn
tells you what?
On 04/20/2010 06:31 AM, j.halifax . wrote:
Hi All,
please help me kindly to reconfig my default GW (Fedora 12).
The GW has 3 active Ethernet cards:
eth0 - connected to Internet ADSL router (incl. VPN, pptpd)
eth1 - not
2010/4/20 Steve Blackwell zep...@cfl.rr.com
My wife just got a new Lexmark X2670 all-in-one printer with her new
laptop that we want to share.
I can't find any drivers for it for F11. Does anyone else have this
printer and if so have you found a way to make it work?
Thanks,
Steve
--
You have tried a configuration with http://localhost:631/ ???
On 04/17/2010 05:30 PM, Mark LaPierre wrote:
Hey All,
I can not get my parallel port to connect to my printer. The printer
was working with F8. Then I upgraded to F10. The printer has not
worked since.
Now I have F12 32 bit
Hey Cameron,
Thx for a great strace chant!
while my use is infrequent, this capture to a file is Very sweet!
Thx, jackc...
On 04/19/2010 08:45 PM, Cameron Simpson wrote:
strace -e trace=file clear 2str.out
--
Jack Craig
Software Engineer
831.461.7100 x120
www.extraview.com
--
users
2010/4/20 Nikolay Yatsyshyn kof...@gmail.com
Mogens Kjaer wrote:
On 04/20/2010 02:41 PM, Nikolay Yatsyshyn wrote:
Mogens Kjaer wrote:
On 04/20/2010 01:23 PM, Nikolay Yatsyshyn wrote:
...
I have been installed ffmpeg-devel, but it was not helpful. This is
complete log,
2010/4/20 Mohamed El Morabity pikachu.2...@gmail.com
2010/4/20 Nikolay Yatsyshyn kof...@gmail.com
Mogens Kjaer wrote:
On 04/20/2010 02:41 PM, Nikolay Yatsyshyn wrote:
Mogens Kjaer wrote:
On 04/20/2010 01:23 PM, Nikolay Yatsyshyn wrote:
...
I have been installed
On Tue April 20 2010, Steve Blackwell wrote:
My wife just got a new Lexmark X2670 all-in-one printer with her new
laptop that we want to share.
I can't find any drivers for it for F11. Does anyone else have this
printer and if so have you found a way to make it work?
Unless things have
On 04/20/2010 08:47 AM, Steve Blackwell wrote:
My wife just got a new Lexmark X2670 all-in-one printer with her new
laptop that we want to share.
I can't find any drivers for it for F11. Does anyone else have this
printer and if so have you found a way to make it work?
Thanks,
Steve
I'm puzzling over case-sensitivity, attributes, and matching rules in 389.
I have an attribute (oid slightly munged for privacy):
attributeTypes: (
1.2.3.4
NAME 'ldapAuthLogin'
DESC 'Account login name'
SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
SINGLE-VALUE
X-ORIGIN 'user defined'
)
It doesn't
Mohamed El Morabity wrote:
2010/4/20 Mohamed El Morabity pikachu.2...@gmail.com
mailto:pikachu.2...@gmail.com
2010/4/20 Nikolay Yatsyshyn kof...@gmail.com
mailto:kof...@gmail.com
Mogens Kjaer wrote:
On 04/20/2010 02:41 PM, Nikolay Yatsyshyn wrote:
On Tue, 2010-04-20 at 15:31 +0200, j.halifax . wrote:
Hi All,
please help me kindly to reconfig my default GW (Fedora 12).
The GW has 3 active Ethernet cards:
eth0 - connected to Internet ADSL router (incl. VPN, pptpd)
eth1 - not used
eth2 - LAN1
eth3 - LAN2.
I had everything working
On Tuesday 20 April 2010, Steve Blackwell wrote:
My wife just got a new Lexmark X2670 all-in-one printer with her new
laptop that we want to share.
I can't find any drivers for it for F11. Does anyone else have this
printer and if so have you found a way to make it work?
Thanks,
Steve
Probably
Christopher Wood wrote:
I'm puzzling over case-sensitivity, attributes, and matching rules in 389.
I have an attribute (oid slightly munged for privacy):
attributeTypes: (
1.2.3.4
NAME 'ldapAuthLogin'
DESC 'Account login name'
SYNTAX 1.3.6.1.4.1.1466.115.121.1.15
SINGLE-VALUE
On Tue, Apr 20, 2010 at 08:45:10AM -0500, Mikkel wrote:
On 04/17/2010 07:30 PM, Mark LaPierre wrote:
Hey All,
I can not get my parallel port to connect to my printer. The printer
was working with F8. Then I upgraded to F10. The printer has not
worked since.
Have you looked in the
On Tue, Apr 20, 2010 at 01:02:09PM -0400, Gene Heskett wrote:
On Tuesday 20 April 2010, Steve Blackwell wrote:
My wife just got a new Lexmark X2670 all-in-one printer with her new
laptop that we want to share.
I can't find any drivers for it for F11. Does anyone else have this
printer and
On Tuesday 20 April 2010, fred smith wrote:
On Tue, Apr 20, 2010 at 01:02:09PM -0400, Gene Heskett wrote:
On Tuesday 20 April 2010, Steve Blackwell wrote:
My wife just got a new Lexmark X2670 all-in-one printer with her new
laptop that we want to share.
I can't find any drivers for it for
On 4/20/2010 10:52 AM, Patrick O'Callaghan wrote:
On Tue, 2010-04-20 at 15:08 +0300, Alan Holt wrote:
Yeeah, I will try for sure)) Thanks
Which part of Avoid top posting and don't use HTML did you not
understand?
It appears, to me, to be both parts.
--
David
signature.asc
On Tue, 20 Apr 2010 18:00:52 +0200
Mohamed El Morabity pikachu.2...@gmail.com wrote:
2010/4/20 Steve Blackwell zep...@cfl.rr.com
My wife just got a new Lexmark X2670 all-in-one printer with her new
laptop that we want to share.
I can't find any drivers for it for F11. Does anyone else
I mean, to make compiz behave as per my configurations, is the only way
modify and create all gconf keys? There is any way to make the so-calld
CompizConfig configuration manager ccsm superseed /apps/compiz gconf
entries?
I'm quite new to Fedora (i'm using k '2.6.32.11-99.fc12.i686.PAE #1 SMP Mon
On 04/20/2010 12:10 PM, fred smith wrote:
On 04/17/2010 07:30 PM, Mark LaPierre wrote:
Hey All,
I can not get my parallel port to connect to my printer. The printer
was working with F8. Then I upgraded to F10. The printer has not
worked since.
Have you looked in the computer's BIOS
On Fri, 16 Apr 2010 16:14:31 -0430, Patrick O'Callaghan wrote:
On Fri, 2010-04-16 at 18:51 +, BeartoothHOS wrote:
Is it just me??
[]
Sounds like the old interface not managed by NetworkManager trick.
Some Gnome apps rely on NM to tell them if the machine is connected. If
From: Tim ignored_mail...@yahoo.com.au
Sent: Tuesday, 2010/April/20 06:00
Tim:
If you read the reviews of anti-virus software, from time to time, you
will see that none of them are 100% effective. The last review I read
came to the conclusion that the most effective checkers only managed to
This is a basic linux question, but how do I find out what users are
included in a given group?
Thanks!
--
Dingo Dave Bartmess
Broomfield, CO. USA
http://edingo.net
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
Is IP forwarding on?
Yes, it is.
Původní zpráva
Od: Terry Polzin foxec...@wowway.com
Předmět: Re: GW (LAN1, LAN2, ADSL) config
Datum: 20.4.2010 19:03:39
On Tue, 2010-04-20 at 15:31 +0200, j.halifax . wrote:
Hi All,
On Tue, Apr 20, 2010 at 12:39 PM, David Bartmess dingod...@edingo.netwrote:
This is a basic linux question, but how do I find out what users are
included in a given group?
grep group name /etc/group
e.g.
grep wheel /etc/group
--
users mailing list
users@lists.fedoraproject.org
To
On 04/21/2010 06:39 AM, David Bartmess wrote:
This is a basic linux question, but how do I find out what users are
included in a given group?
By not hijacking treads.
Don't take a message and change the subject. This is hijacking and
breaks threads. Start a new message.
On Tue, Apr 20, 2010 at 12:54 PM, Ed Greshko ed.gres...@greshko.com wrote:
On 04/21/2010 06:39 AM, David Bartmess wrote:
This is a basic linux question, but how do I find out what users are
included in a given group?
By not hijacking treads.
Don't take a message and change the
On 04/21/2010 06:58 AM, David Burns wrote:
On Tue, Apr 20, 2010 at 12:54 PM, Ed Greshko ed.gres...@greshko.com
mailto:ed.gres...@greshko.com wrote:
On 04/21/2010 06:39 AM, David Bartmess wrote:
This is a basic linux question, but how do I find out what users are
included in a
DEAR RECEIVER,
You have just received an Albanian virus. Since we are not so
technologically advanced in Albania, this is a MANUAL virus. Please
delete all the files on your hard disk yourself and send this mail to
everyone you know.
Thank you very much for collaboration.
Dr. Alban, the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 04/20/2010 05:48 PM, j.halifax . wrote:
Is IP forwarding on?
Yes, it is.
Původní zpráva
Od: Terry Polzin foxec...@wowway.com
Předmět: Re: GW (LAN1, LAN2, ADSL) config
Datum: 20.4.2010 19:03:39
On Tue, Apr 20, 2010 at 1:06 PM, Ed Greshko ed.gres...@greshko.com wrote:
The message contains References: in the header which is used by real
email clients (maybe not gmail) to sort messages in threads.
Wow, if real clients thread together stuff with different subjects, I prefer
the fakes.
David Burns wrote:
On Tue, Apr 20, 2010 at 1:06 PM, Ed Greshko ed.gres...@greshko.com
mailto:ed.gres...@greshko.com wrote:
The message contains References: in the header which is used by real
email clients (maybe not gmail) to sort messages in threads.
Wow, if real clients
On 04/21/2010 07:22 AM, David Burns wrote:
On Tue, Apr 20, 2010 at 1:06 PM, Ed Greshko ed.gres...@greshko.com
mailto:ed.gres...@greshko.com wrote:
The message contains References: in the header which is used by real
email clients (maybe not gmail) to sort messages in threads.
On Tue, Apr 20, 2010 at 1:28 PM, Larry Brower la...@maxqe.com wrote:
Before saying stuff like wow and seeming so shocked and
amazed, perhaps you should RTFM ?
Sarcasm requires no manual.
Dave
--
You can quote me on that.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or
On Tue, 2010-04-20 at 13:22 -1000, David Burns wrote:
On Tue, Apr 20, 2010 at 1:06 PM, Ed Greshko ed.gres...@greshko.com
wrote:
The message contains References: in the header which is used
by real
email clients (maybe not gmail) to sort messages in threads.
.please do netstat -rn
Please also do /sbin/ifconfig -a
==
netstat
==
# netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.180.0 0.0.0.0 255.255.255.0 U 0 0 0 eth3
10.255.253.0
On 04/20/2010 01:10 PM, users-requ...@lists.fedoraproject.org wrote:
Date: Tue, 20 Apr 2010 19:59:55 +0300 From: Nikolay Yatsyshyn
kof...@gmail.com Subject: Re: zoneminder AXIS mpeg4 ffmpeg-libraries
Nothing about. I think issue is going from:
configure:10445: checking
Hi Alan,
On Tuesday 20 April 2010 07:52 AM, Patrick O'Callaghan wrote:
On Tue, 2010-04-20 at 15:08 +0300, Alan Holt wrote:
Yeeah, I will try for sure)) Thanks
Which part of Avoid top posting and don't use HTML did you not
understand?
To send plain text emails from GMail, you can select
On Tue, Apr 20, 2010 at 1:59 PM, Patrick O'Callaghan
pocallag...@gmail.comwrote:
Relying
on Subject for threading is fundamentally broken.
This statement seems to imply that I said or think that same subject = same
thread, or that this ought to be sufficient. Nope.
But I was surprised to
On Tue, Apr 20, 2010 at 1:28 PM, Larry Brower la...@maxqe.com wrote:
Threading is normally down by the message headers and not by the
subject. Before saying stuff like wow and seeming so shocked and
amazed, perhaps you should RTFM ?
So I did. I was again surprised to find that RFC822 never
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 04/20/2010 07:15 PM, j.halifax . wrote:
.please do netstat -rn
Please also do /sbin/ifconfig -a
==
netstat
==
# netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt
On 04/21/2010 09:34 AM, David Burns wrote:
On Tue, Apr 20, 2010 at 1:28 PM, Larry Brower la...@maxqe.com wrote:
Threading is normally down by the message headers and not by the
subject. Before saying stuff like wow and seeming so shocked and
amazed, perhaps you should RTFM ?
So I
Hello,
I couldn't find a EPEL users list, so I'm posting here.
The clamav packages in EPEL are quite broken, and don't work out of
the box. I think this has been the case for many months.
Is there a current maintainer for clamav in EPEL? If not, what is
required to take this role over. I have
Ed Greshko wrote:
http://www.ietf.org/rfc/rfc4685.txt
In addition, you may wish to reference RFC 2822 which obsoletes RFC 822
http://www.faqs.org/rfcs/rfc2822.html
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
On Wednesday 21 April 2010 00:07:57 kalinix wrote:
DEAR RECEIVER,
You have just received an Albanian virus. Since we are not so
technologically advanced in Albania, this is a MANUAL virus. Please
delete all the files on your hard disk yourself and send this mail to
everyone you know.
On 04/20/2010 12:03 AM, Marvin Kosmal wrote:
On 4/19/10, Mark LaPierremarklap...@aol.com wrote:
On 04/17/2010 08:30 PM, Mark LaPierre wrote:
Hey All,
I can not get my parallel port to connect to my printer. The printer
was working with F8. Then I upgraded to F10. The printer
On Tue, 2010-04-20 at 15:06 -1000, David Burns wrote:
On Tue, Apr 20, 2010 at 1:59 PM, Patrick O'Callaghan
pocallag...@gmail.com wrote:
Relying
on Subject for threading is fundamentally broken.
This statement seems to imply that I said or think that same subject
= same
On Wed, 2010-04-21 at 11:46 +1000, Dan Irwin wrote:
On the off chance I'm doing this wrong, is there a better source for
clamav packages for RHEL/CentOS?
yes, rpmforge
Fedora/EPEL clamav seems to really lag behind releases
Craig
--
This message has been scanned for viruses and
On Tue, Apr 20, 2010 at 8:53 AM, Mikkel mik...@infinity-ltd.com wrote:
I can tell you this much - it is a glables problem, and not a cups
problem. If you try printing to the CD with gedit, selecting the CD
as your media, it will work without complaining. For some reason
glabels is ignoring the
I was looking at my logwatch mail and saw:
Failed logins from:
62.39.117.140 (140.117.39-62.rev.gaoland.net): 139 times
220.128.67.41: 9 times
Illegal users from:
62.39.117.140 (140.117.39-62.rev.gaoland.net): 229 times
220.128.67.41: 2 times
Received disconnect:
11:
On Wed, 21 Apr 2010 11:46:33 +1000
Dan Irwin rummymob...@gmail.com wrote:
Hello,
I couldn't find a EPEL users list, so I'm posting here.
Yeah, there isn't one, but the epel-devel list is open for anyone. ;)
The clamav packages in EPEL are quite broken, and don't work out of
the box. I
On Wed, Apr 21, 2010 at 1:17 PM, Craig White craigwh...@azapple.com wrote:
yes, rpmforge
Fedora/EPEL clamav seems to really lag behind releases
Cool. I will look into this.
I had forgotten about rpmforge for some reason.
Cheers,
Dan
--
users mailing list
users@lists.fedoraproject.org
To
On Wed, Apr 21, 2010 at 00:33:11 -0400,
Steve Blackwell zep...@cfl.rr.com wrote:
I googled rev.gaoland.net (http://whois.domaintools.com/gaoland.net)
and it appears to be some kind of French ISP.
Is there some place to report this?
It's probably not worth your time.
If you really want to,
On Tuesday 20 April 2010 09:33 AM, John Aldrich wrote:
On Tue April 20 2010, Steve Blackwell wrote:
My wife just got a new Lexmark X2670 all-in-one printer with her new
laptop that we want to share.
I can't find any drivers for it for F11. Does anyone else have this
printer and if so have
On 4/20/10, Bruno Wolff III br...@wolff.to wrote:
On Wed, Apr 21, 2010 at 00:33:11 -0400,
Steve Blackwell zep...@cfl.rr.com wrote:
I googled rev.gaoland.net (http://whois.domaintools.com/gaoland.net)
and it appears to be some kind of French ISP.
Is there some place to report this?
It's
On Tue, Apr 20, 2010 at 21:46:05 -0700,
Suvayu Ali fatkasuvayu+li...@gmail.com wrote:
You would be happy to know on GNU/linux, they are the printer
manufacturer of choice now. :)
I'm sorry, but their abuse of the DMCA is going to leave them off any list
of printer manufacturers that I might
From: Steve Blackwell zep...@cfl.rr.com
Sent: Tuesday, 2010/April/20 21:33
I was looking at my logwatch mail and saw:
Failed logins from:
62.39.117.140 (140.117.39-62.rev.gaoland.net): 139 times
220.128.67.41: 9 times
Illegal users from:
62.39.117.140
On Tuesday 20 April 2010 09:54 PM, Bruno Wolff III wrote:
On Tue, Apr 20, 2010 at 21:46:05 -0700,
Suvayu Alifatkasuvayu+li...@gmail.com wrote:
You would be happy to know on GNU/linux, they are the printer
manufacturer of choice now. :)
I'm sorry, but their abuse of the DMCA is going to
80 matches
Mail list logo
