Other two questions.
1) Is it better to add user to People (and under posix set the group ID)
or add the user to the group (right click New/User..)?
In the first case I see all users selecting People (but I don't know
about group), in the other case I select the group and I see all users.
2) is
I love Fedora, but after asking about the disappearance myself, the
answer given was less than logical or satisfactory. LVM has gained some
new features that system-config-lvm did not handle. Someone decided
that was unacceptable and it had to be removed. The majority of
applications and
On Thu, May 01, 2014 at 04:26:23AM -0700, Frederick N. Brier wrote:
I love Fedora, but after asking about the disappearance myself, the
answer given was less than logical or satisfactory.
No one wanted to maintain it, I think. If someone wanted to, I'm sure we
could bring it back to life.
If
hello,
WIth fedora I cannot use properly system-config-services.
I get:
ERROR:dbus.proxies:Introspect error on
:1.80:/org/fedoraproject/Config/Services/ServiceHerders/XinetdServiceHerder:
dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not
receive a reply. Possible
On 01-05-14 13:26, Frederick N. Brier wrote:
[snip]
was unwilling to risk building the tool. I have a USB key that boots
Linux Mint. Every time I need to adjust my LVM, I have to reboot to
Mint, make the change and reboot again. That is sad.
So what is the LVM tool in Linux Mint? Perhaps
On 04/30/2014 10:27 AM, Joe Zeff wrote:
On 04/30/2014 08:25 AM, Emmett Culley wrote:
Any ideas how to get apps to require the root password instead of my user
password?
Take yourself out of wheel.
I was in the users group, but not in the wheel group.
Also, I have all sudoers disabled
I have an F19 and an F20 host and when I try to start a webex on the F20
host it doesn't work right. It works fine on the F19 machine.
The symptom is that when I start the webex in F20 it sends up a message
about wanting to run an applet and I tell it yes it's OK to run the
applet. That
* Chris Kottaridis chris...@quietwind.net [2014-05-01 13:25]:
I have an F19 and an F20 host and when I try to start a webex on the
F20 host it doesn't work right. It works fine on the F19 machine.
The symptom is that when I start the webex in F20 it sends up a
message about wanting to run an
We have some ancient systems we use to build backward compatible
software. I was thinking about copying the root/usr stuff to
a faster more modern system and using a chrooted sshd to get
to each build system (now just a separate root on a single
build system).
But now I see random information
On Thu, May 01, 2014 at 03:24:05PM -0400, Tom Horsley wrote:
We have some ancient systems we use to build backward compatible
software. I was thinking about copying the root/usr stuff to
a faster more modern system and using a chrooted sshd to get
to each build system (now just a separate root
Hello,
My firewall-config does not work properly (I am ready posted about).
How can I manage the iptable manually?
There is no
/etc/sysconfig/iptables
Right now I need to turn on the port 5900 open for vnc
Thank.
===
On 05/01/2014 02:11 PM, Deepak Bhole wrote:
* Chris Kottaridis chris...@quietwind.net [2014-05-01 13:25]:
I have an F19 and an F20 host and when I try to start a webex on the
F20 host it doesn't work right. It works fine on the F19 machine.
The symptom is that when I start the webex in F20 it
On 05/01/2014 04:27 PM, Chris Kottaridis wrote:
On 05/01/2014 02:11 PM, Deepak Bhole wrote:
* Chris Kottaridis chris...@quietwind.net [2014-05-01 13:25]:
I have an F19 and an F20 host and when I try to start a webex on the
F20 host it doesn't work right. It works fine on the F19 machine.
The
F20
I put an IPv4 entry for a server in my /etc/hosts file. I can 'ping
bob', but 'host bob' comes back with:
Host bob not found: 3(NXDOMAIN)
I have this vague memory from years back about a file that set
precedence of hosts file and dns for fqdn lookup. Can't remember it of
find it.
Hi,
Disclaimer: I do not use this extension, but I do use the XFCE counterpart.
On Wed, Apr 30, 2014 at 10:29:24AM -0400, Robert Moskowitz wrote:
This extension gets its weather information from the Norway weather service,
and you can't change this.
This is standard practise among many FOSS
On 05/02/14 04:52, Robert Moskowitz wrote:
F20
I put an IPv4 entry for a server in my /etc/hosts file. I can 'ping bob',
but 'host bob' comes back with:
Host bob not found: 3(NXDOMAIN)
I have this vague memory from years back about a file that set precedence of
hosts file and dns for
2014-05-01 23:52 GMT+03:00 Robert Moskowitz r...@htt-consult.com:
F20
I put an IPv4 entry for a server in my /etc/hosts file. I can 'ping bob',
but 'host bob' comes back with:
Host bob not found: 3(NXDOMAIN)
I have this vague memory from years back about a file that set precedence
of
On 05/01/2014 04:56 PM, Ed Greshko wrote:
On 05/02/14 04:52, Robert Moskowitz wrote:
F20
I put an IPv4 entry for a server in my /etc/hosts file. I can 'ping bob', but
'host bob' comes back with:
Host bob not found: 3(NXDOMAIN)
I have this vague memory from years back about a file that set
Once upon a time, Robert Moskowitz r...@htt-consult.com said:
Kind of thought so. So is there an equiv command that follows
system priorities for both dns and hosts file?
getent hosts www.google.com
That will follow the IPv6-before-IPv4 rules (so by default, if the host
has an IPv6 entry,
On 05/01/2014 01:40 PM, Andrew Azores issued this missive:
On 05/01/2014 04:27 PM, Chris Kottaridis wrote:
On 05/01/2014 02:11 PM, Deepak Bhole wrote:
* Chris Kottaridis chris...@quietwind.net [2014-05-01 13:25]:
I have an F19 and an F20 host and when I try to start a webex on the
F20 host
On 05/02/14 03:51, Patrick Dupre wrote:
Hello,
My firewall-config does not work properly (I am ready posted about).
How can I manage the iptable manually?
There is no
/etc/sysconfig/iptables
Right now I need to turn on the port 5900 open for vnc
Are you running into the same problem a
On 5/1/2014 12:51 PM, Patrick Dupre wrote:
How can I manage the iptable manually?
There is no
/etc/sysconfig/iptables
Right now I need to turn on the port 5900 open for vnc
Hello,
Probably be of some help:
http://fedoraproject.org/wiki/How_to_edit_iptables_rules
--
users
On 05/01/2014 05:08 PM, Rick Stevens wrote:
On 05/01/2014 01:40 PM, Andrew Azores issued this missive:
On 05/01/2014 04:27 PM, Chris Kottaridis wrote:
On 05/01/2014 02:11 PM, Deepak Bhole wrote:
* Chris Kottaridis chris...@quietwind.net [2014-05-01 13:25]:
I have an F19 and an F20 host and
On 05/02/14 06:24, Edward M wrote:
On 5/1/2014 12:51 PM, Patrick Dupre wrote:
How can I manage the iptable manually?
There is no
/etc/sysconfig/iptables
Right now I need to turn on the port 5900 open for vnc
Hello,
Probably be of some help:
This doesn't answer the original question, but here are two comments.
a.) Even a few, let alone many, file system resizes make the file system
inefficient. This goes for both ext and XFS. (Btrfs is in a different category
because it allocates in chunks and when a fs is resized, a drive is
On 5/1/2014 3:33 PM, Ed Greshko wrote:
On 05/02/14 06:24, Edward M wrote:
On 5/1/2014 12:51 PM, Patrick Dupre wrote:
How can I manage the iptable manually?
There is no
/etc/sysconfig/iptables
Right now I need to turn on the port 5900 open for vnc
Hello,
Probably be of some
- Original Message -
From: Ed Greshko
Sent: 05/02/14 12:23 AM
To: Community support for Fedora users
Subject: Re: iptable
On 05/02/14 03:51, Patrick Dupre wrote:
Hello,
My firewall-config does not work properly (I am ready posted about).
How can I manage the iptable
iptables -L
gives:
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
On 05/02/14 06:52, Patrick Dupre wrote:
Oh I now,
but on this machine the 5900-5903 port are filtering and I cannot open them.
using firewall-config, I get:
ERROR:dbus.proxies:Introspect error on
:1.80:/org/fedoraproject/Config/Services/ServiceHerders/XinetdServiceHerder:
On 05/02/14 06:57, Patrick Dupre wrote:
iptables -L
gives:
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot
OK,
Thank,
Now it better,
ACCEPT tcp -- anywhere anywhere tcp dpts:rfb:5903
ctstate NEW
ACCEPT tcp -- anywhere anywhere tcp dpt:5901
ctstate NEW
but the port are still closed.
- Original Message -
From: Ed Greshko
Sent:
systemctl status dbus.service
dbus.service - D-Bus System Message Bus
Loaded: loaded (/usr/lib/systemd/system/dbus.service; static)
Active: active (running) since Thu 2014-05-01 18:30:32 CEST; 6h ago
Main PID: 965 (dbus-daemon)
CGroup: /system.slice/dbus.service
├─ 965
On 05/02/14 07:24, Patrick Dupre wrote:
Thank,
Now it better,
ACCEPT tcp -- anywhere anywhere tcp
dpts:rfb:5903 ctstate NEW
ACCEPT tcp -- anywhere anywhere tcp dpt:5901
ctstate NEW
but the port are still closed.
Ports will
On 2 May 2014 at 7:09, Ed Greshko wrote:
Date sent: Fri, 02 May 2014 07:09:29 +0800
From: Ed Greshko ed.gres...@greshko.com
To: Community support for Fedora users
users@lists.fedoraproject.org
Subject:Re: iptable
On 05/02/14
- Original Message -
From: Ed Greshko
Sent: 05/02/14 01:28 AM
To: Community support for Fedora users
Subject: Re: iptable
On 05/02/14 07:24, Patrick Dupre wrote:
Thank,
Now it better,
ACCEPT tcp -- anywhere anywhere tcp dpts:rfb:5903 ctstate NEW
ACCEPT tcp -- anywhere
On 05/02/14 07:37, Patrick Dupre wrote:
PORT STATESERVICE
5900/tcp filtered vnc
5901/tcp filtered vnc-1
5902/tcp filtered vnc-2
5903/tcp filtered vnc-3
But then,
TigerVNC Viewer 64-bit v1.3.0 (20140319)
Built on Mar 19 2014 at 17:09:18
Copyright (C) 1999-2011 TigerVNC Team and
- Original Message -
From: Ed Greshko
Sent: 05/02/14 01:50 AM
To: Community support for Fedora users
Subject: Re: iptable
On 05/02/14 07:37, Patrick Dupre wrote:
PORT STATE SERVICE
5900/tcp filtered vnc
5901/tcp filtered vnc-1
5902/tcp filtered vnc-2
5903/tcp filtered
On 05/02/14 08:01, Patrick Dupre wrote:
Yes,
Thank to mind me.
In the mean time, the machine has been updated.
So the definitive conclusion is that I will never be able the access to this
machine because of the firewall?
Can I just use the ssh?
By the way, I can sak that they opne the
Robert Moskowitz:
This extension gets its weather information from the Norway weather service,
and you can't change this.
Suvayu Ali:
This is standard practise among many FOSS weather monitoring tools. A
year or so back most popular weather feeds either stopped, went
proprietary, or kept
Okay, I have to admit I gave been lazy and have fallen far behind the
the curve on Fedora releases. I am currently running FC14 and I want to
upgrade to FC20. My question for the board is as follows:
Since I am so far behind the current release of Fedora will I have any
trouble restoring a
Thank again,
I remember that I took the control on this machine.
but I cannot do it again.
Even in the past, I was able to use nomachine, but not anymore.
with remmina, the only thing that I can do is a text session
I cannot use the nx, rdp,xdmcp session.
I can get: Command xqproxy not found on
On 05/01/2014 07:47 PM, Tim wrote:
Robert Moskowitz:
This extension gets its weather information from the Norway weather service,
and you can't change this.
Suvayu Ali:
This is standard practise among many FOSS weather monitoring tools. A
year or so back most popular weather feeds either
On 05/02/14 08:56, Patrick Dupre wrote:
I remember that I took the control on this machine.
but I cannot do it again.
Even in the past, I was able to use nomachine, but not anymore.
with remmina, the only thing that I can do is a text session
I cannot use the nx, rdp,xdmcp session.
You
On Thu, May 01, 2014 at 08:55:43PM -0400, Charlie McVeigh wrote:
Since I am so far behind the current release of Fedora will I have any
trouble restoring a backup of my Evolution files to FC20 Evolution once
I upgrade? I have searched the web for advice on this but I can't find
any
Hello Ed,
Finally, I made it works, with vnc. remmina.
I just did not remember!
Thank for your help.
Regards.
On 05/02/14 08:56, Patrick Dupre wrote:
I remember that I took the control on this machine.
but I cannot do it again.
Even in the past, I was able to use
On 05/01/2014 05:04 PM, Alchemist wrote:
2014-05-01 23:52 GMT+03:00 Robert Moskowitz r...@htt-consult.com
mailto:r...@htt-consult.com:
F20
I put an IPv4 entry for a server in my /etc/hosts file. I can
'ping bob', but 'host bob' comes back with:
Host bob not found:
On 05/01/2014 05:12 PM, Chris Adams wrote:
Once upon a time, Robert Moskowitz r...@htt-consult.com said:
Kind of thought so. So is there an equiv command that follows
system priorities for both dns and hosts file?
getent hosts www.google.com
That will follow the IPv6-before-IPv4 rules (so
On Thu, 2014-05-01 at 22:23 +, upda...@fedoraproject.org wrote:
UNetbootin allows you to create bootable Live USB drives for a variety of
Linux distributions from Windows or Linux, without requiring you to burn a CD.
You can either let it download one of the many distributions supported
Tim:
While that sounds reasonable, the 15 second refresh period does not.
Does it really do that? Is it really necessary to do so?
Steven Stern:
I've left the capture running for a while and it seems that the timing
varies. It's been a while since it last checked. It seems that the
On 05/01/14 23:55, Patrick Laimbock wrote:
On 01-05-14 13:26, Frederick N. Brier wrote:
[snip]
was unwilling to risk building the tool. I have a USB key that boots
Linux Mint. Every time I need to adjust my LVM, I have to reboot to
Mint, make the change and reboot again. That is sad.
So
On 5-1-14 22:35:54 Robert Moskowitz wrote:
On 05/01/2014 05:12 PM, Chris Adams wrote:
To see all the matches, IPv6 and IPv4, you can use ahosts
instead
comannd not found. I will have to figure out what rpm provides it,
as it was not part of the base f20 install. But thanks
getent
On 05/02/2014 12:26 AM, Garry T. Williams wrote:
On 5-1-14 22:35:54 Robert Moskowitz wrote:
On 05/01/2014 05:12 PM, Chris Adams wrote:
To see all the matches, IPv6 and IPv4, you can use ahosts
instead
comannd not found. I will have to figure out what rpm provides it,
as it was not part of
52 matches
Mail list logo