On Thu, 2019-05-09 at 15:14 -0400, Bob Goodwin wrote:
> If I put the viasat unit into it's bridged mode I would expect output
> as 182.168.1.1 but not sure of that.
If you put it into bridge mode, it'll have the public IP that the ISP
assigns to you (previously that IP would have just been
On 5/9/19 8:44 PM, Todd Chester via users wrote:
I prefer stand alone scanners.
Interesting. They are not very common now.
The extra step is annoying, especially since I had the
feature before
I'm curious what the use case is for printing something that you just
scanned? Is it for the
Hi everyone.
I upgraded yesterday my HP Pavilion from Fedora 29 to 30. Everything went
wonderfully, thank you all. I have a second monitor attached to it via
HDMI. All run perfectly and when I came back I realized the laptop's screen
was gray with the fedora logo on it. It is there but I can't use
On 5/9/19 5:45 PM, Samuel Sieb wrote:
On 5/9/19 11:25 AM, ToddAndMargo via users wrote:
It looks like I lost my ability to print directly
from Simple Scan. Is this a regression or am I
missing something?
I see the same thing on F29 and thinking about it, it makes sense to me.
It's a
On 5/9/19 7:04 PM, Ranjan Maitra wrote:
On Thu, 9 May 2019 17:56:51 -0700 Samuel Sieb wrote:
On 5/9/19 3:50 PM, Ranjan Maitra wrote:
After a three successful upgrades to F30 from F29 under my belt, a cocky me has
been floored. Everything went through fine (or so it seemed) using dnf upgrade
On Thu, 9 May 2019 17:56:51 -0700 Samuel Sieb wrote:
> On 5/9/19 3:50 PM, Ranjan Maitra wrote:
> > After a three successful upgrades to F30 from F29 under my belt, a cocky me
> > has been floored. Everything went through fine (or so it seemed) using dnf
> > upgrade --releasever 30 but I ended
On 5/9/19 6:08 PM, Sam Varshavchik wrote:
Also missing from this report is the actual reason for getting dropped
into emergency mode.
Emergency mode is not the issue here. The real issue is what caused the
emergency mode. It's unlikely that anyone will be able to help you until
you
On Thu, 09 May 2019 21:08:36 -0400 Sam Varshavchik
wrote:
> Samuel Sieb writes:
>
> > On 5/9/19 3:50 PM, Ranjan Maitra wrote:
> >> After a three successful upgrades to F30 from F29 under my belt, a cocky me
> >> has been floored. Everything went through fine (or so it seemed) using dnf
> >>
Samuel Sieb writes:
On 5/9/19 3:50 PM, Ranjan Maitra wrote:
After a three successful upgrades to F30 from F29 under my belt, a cocky me
has been floored. Everything went through fine (or so it seemed) using dnf
upgrade --releasever 30 but I ended with, upon reboot:
You are in
On 5/9/19 3:50 PM, Ranjan Maitra wrote:
After a three successful upgrades to F30 from F29 under my belt, a cocky me has
been floored. Everything went through fine (or so it seemed) using dnf upgrade
--releasever 30 but I ended with, upon reboot:
You are in emergency mode. After logging
On 5/9/19 12:14 PM, Bob Goodwin wrote:
It's not clear to me how this could work? I have an identical ASUS
router in the barn set up as a bridge and it seems useless for anything
else. I know that I can't access it's browser set up function without
bringing it in here and plugging a cat5 cable
On 5/9/19 3:35 PM, Gianluca Cecchi wrote:
Hello,
I have a laptop with preinstalled Win10 where I want to side install
fedora 30 too.
Current layout of partitions on disk is this one, if I start from an usb
live:
Device Start End Sectors Size Type
/dev/nvme0n1p1
On 5/10/19 8:28 AM, Cameron Simpson wrote:
> On 10May2019 07:13, Ed Greshko wrote:
>> On 5/10/19 2:01 AM, Samuel Sieb wrote:
>>> On 5/9/19 4:23 AM, Ed Greshko wrote:
If I were trying to get this working I would make sure the Interface of
the ASUS was
something like 192.168.1.5 and
On 5/9/19 11:25 AM, ToddAndMargo via users wrote:
It looks like I lost my ability to print directly
from Simple Scan. Is this a regression or am I
missing something?
I see the same thing on F29 and thinking about it, it makes sense to me.
It's a scanning program, leave the printing details
On 10May2019 07:13, Ed Greshko wrote:
On 5/10/19 2:01 AM, Samuel Sieb wrote:
On 5/9/19 4:23 AM, Ed Greshko wrote:
If I were trying to get this working I would make sure the Interface of the
ASUS was
something like 192.168.1.5 and I would run the ASUS in Bridge mode.
This way everything on
On 5/10/19 2:01 AM, Samuel Sieb wrote:
> On 5/9/19 4:23 AM, Ed Greshko wrote:
>> If I were trying to get this working I would make sure the Interface of the
>> ASUS was
>> something like 192.168.1.5 and I would run the ASUS in Bridge mode.
>>
>> This way everything on your network could have IP
Hi,
After a three successful upgrades to F30 from F29 under my belt, a cocky me has
been floored. Everything went through fine (or so it seemed) using dnf upgrade
--releasever 30 but I ended with, upon reboot:
You are in emergency mode. After logging in, type "journalctl -xb" to
view
Hello,
I have a laptop with preinstalled Win10 where I want to side install fedora
30 too.
Current layout of partitions on disk is this one, if I start from an usb
live:
# fdisk -l
Disk /dev/nvme0n1: 477 GiB, 512110190592 bytes, 1000215216 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size
On 05/09/19 07:23, Ed Greshko wrote:
So, your network kinda looks like the attached. (no switch in my diagram)
Your Viasat Modem has 2 interfaces. The interface that connects to the Radio
Equipment,
does it have an IP address? Do you know what it is? And the second interface
connects to
Hi All,
Fedora 30
$ rpm -qa simple-scan
simple-scan-3.32.2-2.fc30.x86_64
It looks like I lost my ability to print directly
from Simple Scan. Is this a regression or am I
missing something?
-T
___
users mailing list -- users@lists.fedoraproject.org
On 5/9/19 4:23 AM, Ed Greshko wrote:
If I were trying to get this working I would make sure the Interface of the
ASUS was
something like 192.168.1.5 and I would run the ASUS in Bridge mode.
This way everything on your network could have IP addresses of 192.168.1.X
There should be no reason to
Allegedly, on or about 9 May 2019, Bob Goodwin sent:
> Everything I have read says Viasat's equipment must be used. ... It
> also contains a voip adapter for the telephone, before this "system
> upgrade" two months ago that was separate.
If it's a standard VOIP thing, then you probably can
I confirm Android Studio works fine with Fedora 30. If you are only
interested in the emulator, however, you can try the command line tools
(available for download from the same link). The download size is much
smaller and it includes the emulator and something like a package
manager for
On Thu, 9 May 2019 at 07:21, Bob Goodwin wrote:
>
>
> On 05/07/19 20:17, Tony Su wrote:
> > I've posted several times over the past 8 months or so about the
> > equipment I've been using on Cox and Spectrum, I don't even have to
> > tell the ISP what equipment I'm using... I just tell them I'm
On 5/9/19 6:43 PM, Bob Goodwin wrote:
>
>
> On 05/09/19 06:29, Ed Greshko wrote:
>> Wasn't it pointed out quite some time ago that 2 devices can't have the same
>> IP address?
>>
>> You show your Viasat Modem and ASUS Router as both having 192.168.1.1.
> .
> Yes and understood. The diagram simply
On 05/09/19 06:29, Ed Greshko wrote:
Wasn't it pointed out quite some time ago that 2 devices can't have the same IP
address?
You show your Viasat Modem and ASUS Router as both having 192.168.1.1.
.
Yes and understood. The diagram simply shows what I have to start with,
the new
On 5/9/19 6:20 PM, Bob Goodwin wrote:
> Any further suggestions appreciated
Wasn't it pointed out quite some time ago that 2 devices can't have the same IP
address?
You show your Viasat Modem and ASUS Router as both having 192.168.1.1.
--
Right: I dislike the default color scheme Wrong:
On 05/07/19 20:17, Tony Su wrote:
I've posted several times over the past 8 months or so about the
equipment I've been using on Cox and Spectrum, I don't even have to
tell the ISP what equipment I'm using... I just tell them I'm using my
own equipment on the Service Order, then hook up my own
28 matches
Mail list logo
