On 6/27/19 5:53 AM, Robert Moskowitz wrote:
On 6/27/19 5:49 AM, Robert Moskowitz wrote:
# efibootmgr -v
EFI variables are not supported on this system.
It is interesting that the older x120e does support this. Though it may
be that the BIOS on this x140e is a little old and they fixed this o
> On 6/28/19 6:10 AM, Robert Moskowitz wrote:
>> I am hoping it is a config problem. If not I have an rtl card that is
>> in an x120e 'hanger queen' that I can use instead.
>
> Well, if the rtl card connects fine and the broadcom with the same
> configuration doesn't
> then it is unlik
On 6/28/19 6:10 AM, Robert Moskowitz wrote:
> I am hoping it is a config problem. If not I have an rtl card that is
> in an x120e 'hanger queen' that I can use instead.
Well, if the rtl card connects fine and the broadcom with the same
configuration doesn't
then it is unlikely to be a configura
On 6/27/19 5:53 PM, Ed Greshko wrote:
On 6/28/19 1:54 AM, Robert Moskowitz wrote:
On 6/27/19 1:43 PM, Ed Greshko wrote:
On 6/27/19 10:20 PM, Robert Moskowitz wrote:
On 6/27/19 9:47 AM, Ed Greshko wrote:
On 6/27/19 9:40 PM, Robert Moskowitz wrote:
I am working on my non-working wifi now.
Patrick D. you can try driver for Toshiba e-studio2830C .It is with
option that you can use color.
On Thu, 2019-06-27 at 19:47 +0200, Patrick Dupre wrote:
> Hello,
>
> When I install a e-studio3005AC printer, it installs driver only in
> grey scale, and do not ask me any thing.
> How can I instal
On 6/28/19 1:54 AM, Robert Moskowitz wrote:
>
>
> On 6/27/19 1:43 PM, Ed Greshko wrote:
>> On 6/27/19 10:20 PM, Robert Moskowitz wrote:
>>>
>>> On 6/27/19 9:47 AM, Ed Greshko wrote:
On 6/27/19 9:40 PM, Robert Moskowitz wrote:
> I am working on my non-working wifi now. The last critical it
On 6/27/19 1:43 PM, Ed Greshko wrote:
On 6/27/19 10:20 PM, Robert Moskowitz wrote:
On 6/27/19 9:47 AM, Ed Greshko wrote:
On 6/27/19 9:40 PM, Robert Moskowitz wrote:
I am working on my non-working wifi now. The last critical item (I hope).
Just installing the broadcom-wl rpm got the card r
Hello,
When I install a e-studio3005AC printer, it installs driver only in
grey scale, and do not ask me any thing.
How can I install the color drivers?
Thank.
===
Patrick DUPRÉ | | email: pd
On 6/27/19 10:20 PM, Robert Moskowitz wrote:
>
>
> On 6/27/19 9:47 AM, Ed Greshko wrote:
>> On 6/27/19 9:40 PM, Robert Moskowitz wrote:
>>> I am working on my non-working wifi now. The last critical item (I hope).
>>>
>>> Just installing the broadcom-wl rpm got the card recognized, and I am
>>> se
Actually,
I have the option Color default gray checked.
I cannot unchecked it.
Is there a special tool for that?
> Thank for the suggestions.
>
> However, in printing Option, I only have:
> Page setup
> pages per side
> Two-sided
> Orientation
> Page size
> Paper source
> Advanced
> Print
That is about the only way, and when the s/w updates you sometimes have to
do it again and again.
On Thu, Jun 27, 2019 at 1:15 PM Greg Woods wrote:
> I discovered the very hard way (wasting a couple of frustrating hours)
> that it is virtually impossible to set up a newer HP printer without
> r
I discovered the very hard way (wasting a couple of frustrating hours) that
it is virtually impossible to set up a newer HP printer without running
hp-setup first.
--Greg
___
users mailing list -- users@lists.fedoraproject.org
To unsubscribe send an emai
On Thu, 27 Jun 2019 16:12:10 +0200
"Patrick Dupre" wrote:
> Hello,
>
> The issue is fixed. But I cannot really gives a recipes.
> The issue was in the generation of the grub.cfg
> 1) It did let boot on system 1 when generated by system 2 (it looks
> that a efilinux and efiinitrd were missing). T
On 6/27/19 9:47 AM, Ed Greshko wrote:
On 6/27/19 9:40 PM, Robert Moskowitz wrote:
I am working on my non-working wifi now. The last critical item (I hope).
Just installing the broadcom-wl rpm got the card recognized, and I am
seeing SSIDs, but cannot connect. Perhaps some setting needed.
S
Hello,
The issue is fixed. But I cannot really gives a recipes.
The issue was in the generation of the grub.cfg
1) It did let boot on system 1 when generated by system 2 (it looks that a
efilinux
and efiinitrd were missing). This let me boot on system 1.
2) When I booted on system 1, the new grub
On Tue, 25 Jun 2019 21:59:27 +0200
"Patrick Dupre" wrote:
> Hello,
>
> Thank for your suggestions.
> Here is the current situation.
> After I installed the 2nd boot system on sda6 with a /boo/efi on the
> sdb1 (the 2 systems could mount the same /boot/efi), I have never
> been able to boot on th
Previously, I have presented my project to you. The current name of my
project is PCYNLITX.
PCYNLITX platform offers completely new programming technology which can be
named as Programmable Meta-Programming System and PCYNLITX platform is just
a particular application of this new programming meth
On 6/27/19 9:40 PM, Robert Moskowitz wrote:
> I am working on my non-working wifi now. The last critical item (I hope).
>
> Just installing the broadcom-wl rpm got the card recognized, and I am
> seeing SSIDs, but cannot connect. Perhaps some setting needed.
>
> So I figure to start I need to kno
I am working on my non-working wifi now. The last critical item (I hope).
Just installing the broadcom-wl rpm got the card recognized, and I am
seeing SSIDs, but cannot connect. Perhaps some setting needed.
So I figure to start I need to know what card F30 thinks I have. Win10's
driver for
On 6/27/19 5:49 AM, Robert Moskowitz wrote:
On 6/26/19 11:27 PM, Chris Murphy wrote:
You can insert 'set debug=all' and 'set debug=off' at different points
in the grub.cfg to track it down, but you want to be really discreet
with it because it's incredibly verbose. If you were to 'set
debug=
Hi,
I have a machine with F29 and a partition with an old WinXP (not EFI).
Before updating to F30 I wanted to try the new BLS so I used
"grub2-switch-to-blscfg" to test the transition, but something went wrong.
Before I did a full update and reboot to be sure, but after I gave the command
and
On 6/26/19 11:27 PM, Chris Murphy wrote:
You can insert 'set debug=all' and 'set debug=off' at different points
in the grub.cfg to track it down, but you want to be really discreet
with it because it's incredibly verbose. If you were to 'set
debug=all' as the first line in grub.cfg and then 'se
Thank for the suggestions.
However, in printing Option, I only have:
Page setup
pages per side
Two-sided
Orientation
Page size
Paper source
Advanced
Print Quality
Resolution
No thing about Color
> Sent: Wednesday, June 26, 2019 at 3:13 PM
> From: "Pavel Lisý"
> To: users@lists.fedorapr
dnf install efibootmgr
> Sent: Thursday, June 27, 2019 at 5:34 AM
> From: "Robert Moskowitz"
> To: "Community support for Fedora users" ,
> "Chris Murphy"
> Subject: Re: F30 - Grub error message
>
>
>
> On 6/26/19 11:27 PM, Chris Murphy wrote:
> > You can insert 'set debug=all' and 'set deb
24 matches
Mail list logo
