HI all,
I had installed Fedora 30 and
/etc/network-scripts/ is empty, there are no ifcfg-eth* files.
In Fedora 29, I had set eth0 to be a dhclient interface by editing
/etc/sysconfig/network-scripts/ifcfg-eth0
(or /etc/sysconfig/network-scripts/ifcfg-enp182s0f1)
and setting
BOOTPROTO=dhcp
...
Hi all,
I had installed Fedora 30, on a dual boot machine which has a second
partition with Fedora 28.
Fedora 30 comes by default with a new boot loader spec.
I found under /boot/loader/entries/ the following:
ls /boot/loader/entries/
ec1b8b7719964c8b9a1d8db430c63fd6-0-rescue.conf
Hi, all.
On F28, when I am running
useradd test10
A new folder is generated:
/home/test10/
But when I run:
userdel test10
this folder remains.
This same is when
adduser test11
and them
userdel test11
/home/test11 remains.
Is this an expected behaviour ?
Is there a way to cause the home folder
Hello,
I have a USB stick on which I had in the past an Ubunutu installatilon.
When I run "e2label /dev/sdb" I get:
e2label /dev/sdb
e2label: Bad magic number in super-block while trying to open /dev/sdb
/dev/sdb contains a iso9660 file system labelled 'Ubuntu-Server 17.04 amd64'
Now, I did not
Hello all,
I want to enlarge the fonts I am using in terminal (when logging as
non root) on Fedora 28.
I installed the terminus-fonts rpm on fedora 28 (dnf install terminus-fonts)
When I try from a terminal (I mean not gnome-terminal, but the
terminal you get into when logging in
without GUI/X
Hello, Fedora users,
How do I change the mount point of a USB dongle on Fedora when using automount ?
When I insert a USB dongle, it is automounted under /run/media/root/4031-0655
I want it to be automounted on /mnt/sdb1
Regards,
Kevin
___
users
Hello, Fedora users,
I am working with gnome-terminal under Fedora 27. I want to be able to
select text with the right click of a mouse, and to
paste it immediately when pressing the left button (not the middle
button). I am used to this with apps like putty, mRmoteNG and others
apps.
There was
rick Laimbock <patr...@laimbock.com> wrote:
> On 03-12-16 13:46, Kevin Wilson wrote:
>>
>> Hello,
>> There is a way to avoid using the enp2s* naming conventions for
>> ethernet cards and use eth* instead by adding
>> biosdevname=0 neti
Hello,
There is a way to avoid using the enp2s* naming conventions for
ethernet cards and use eth* instead by adding
biosdevname=0 netif.names=0
to the kernel command line.
I used it in earlier Fedora distros, but with F25 it does not work.
My Kernel command line now after adding "biosdevname=0
Hi all,
I have several machines in my lab, all of them running Fedora.
Some of the have both SSD and non SSD drivers.
Since the setup is dynamic (sometimes I transfer disks from machine to
machine), there are cases that the SSD drive is one machine is
disconnected/moved to a different machine, and
Hi,
Thanks Todd.
The thing is that now CentOS is installed and it is the current
control and it indeed uses an older grub. So what do you suggest ?
That I will reinstall Ubuntu on Fedora on the current machine so they
will the "current control"? It is quite a hassle as there is no free
partition
Hello,
On a machine with Fedora 23 grub2, I use "grub2-mkconfig -o
/boot/grub2/grub.cfg" in order to update
/boot/grub2/grub.cfg if there are changes in /etc/default/grub.
Running this command also
sees to it that if there are other installations of Linux on the
machine, and if the respective
Hi all,
I ran a python 2 script which works fine for Fedora 23 and earlier,
with python-2.7. It stopped
to work on Fedoera 24 ; following are details:
python
Python 2.7.10 (default, Sep 8 2015, 17:20:17)
[GCC 5.1.1 20150618 (Red Hat 5.1.1-4)] on linux2
Type "help", "copyright", "credits" or
, 2016 at 7:42 AM, Mike Wright
<nob...@nospam.hostisimo.com> wrote:
> On 04/16/2016 09:32 PM, Kevin Wilson wrote:
>>
>> Hi,
>>>
>>> 'loop' mount iso, change grub.config, save as new iso, install to usb.
>>
>>
>> Thanks for the advice, but this
quot;write protect" of the iso?
Regards,
Kevin
On Sat, Apr 16, 2016 at 4:21 PM, g <gel...@bellsouth.net> wrote:
>
>
> On 04/16/16 07:40, Kevin Wilson wrote:
>> Hi,
>> Thanks, but this does not seem to solve the problem.
>> Once I put the live on part 1, as suggeste
at 2:24 PM, g <gel...@bellsouth.net> wrote:
>
>
> On 04/16/16 05:27, Kevin Wilson wrote:
>> Hello,
>> After copying an ISO of fedora 23 x86_64 into a USB key with the dd
>> command, everything is fine - I can boot with that USB
>> key.
>> However, ther
Hello,
After copying an ISO of fedora 23 x86_64 into a USB key with the dd
command, everything is fine - I can boot with that USB
key.
However, there is one machine where I have to use nosmp so that it
will boot. There is some hw problem with this issue but
this machine is only for simple tests so
Thanks!
Sorry for my ignorance, what is m/c?
Rami
On Thu, Mar 24, 2016 at 1:15 PM, Ron Leach <ronle...@tesco.net> wrote:
> On 24/03/2016 08:16, Kevin Wilson wrote:
>>
>>
>> Any idea what can be the reason for this ?
>>
>
> I've been a bit concerned abo
Hi all,
On a Fedora 23 machine running the original kernel from distro, I see
/sys/devices/system/node/node1
but I **do not** see /sys/devices/system/node/node0.
On other Fedora 23 machines I do see **both** /sys/devices/system/node/node0 and
/sys/devices/system/node/node1
Any idea what can be
Hello all,
Is there a way to find out the date on which a Fedora distro was
installed on a given machine (assuming that the date was set correctly
on the machine when it was installed)?
Regards,
Kevin
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription
Hello,
I want to install Fedora 22 on x86_63
I had downloaded the iso of workstation.
I know I can burn it with k3b, I did this in the past with other releases.
Is there a way I can burn it from the linux command line so the DVD
can be bootable and so that I
will be able to install from it ?
Dan,
Thanks a lot for your reply.
In fact, I ran
pm -e selinux-policy-targeted
rpm -e selinux-policy
And after reboot I got some message about freeze from systemd, I could
not login (tried twice), so I reinstalled Linux on this machine.
The question is: what do you mean by If you disable SELinux.
Hi,
Thanks Sam, Tom and Ranjan!
Going further:
In /etc/selinux/config
I set
SELINUX=disabled
Which means that I do not use in fact SElinux, so it seems to me.
So will it be OK to run:
rpm -e selinux-policy-targeted
rpm -e selinux-policy
Regards,
Kevin
On Sat, Jun 20, 2015 at 3:26 AM,
Hi all,
Will I miss something critical if I will disable auditd on Fedora 22
by systemctl disable auditd ?
Regards,
Kevin
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of
Hi, Fedora users,
I downloaded and burned on a DVD the following image:
Fedora KDE Plasma Desktop
from Fedora website:
http://spins.fedoraproject.org/en/kde/
Now, I want to install it on my disk.
However, when booting from the DVD, it starts a screen where I see
Live user session (as default)
Hi,
I recently installed Fedora 20 on x86_64 machine . I
also installed several packages on this machine. When I boot my Fedora
20 machine, ifconfig -a shows that there is virbr0 and it is up.
It is probably due to some rpm/service which I installed.
Any idea which rpm/service could it be ? is
Hi,
Is there a way to know when the last updatedb was performed on a system ?
Regards,
Kevin
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of Conduct:
Hi, all,
I had installed Fedora 22 on x86_64 machine.
I had installed kde by dnf install -y @kde.
I had selected kde by swithcdesk.
I had rebooted and still it starts in GNOME.
switchdesk from x windows shows that KDE is selected.
I made another reboot, selecting plasma from the scroll option
, bitlord bitlord0...@gmail.com wrote:
On Saturday, May 30, 2015 04:23:30 PM Kevin Wilson wrote:
Hi,
Thanks for you answers.
First, dnf install @kde-desktop told me that it is already installed.
Eventually I ran
dnf group install KDE Plasma Workspaces
And after reboot I can start KDE
bitlord0...@gmail.com wrote:
On Sat, 30 May 2015 09:34:03 +0300
Kevin Wilson wkev...@gmail.com wrote:
Hi, all,
I had installed Fedora 22 on x86_64 machine.
I had installed kde by dnf install -y @kde.
I had selected kde by swithcdesk.
I had rebooted and still it starts in GNOME
Hi,
I have the follwing problem, running on Fedora 21, with
docker-io-1.5.0-2.fc21.x86_64:
I have this Dockerfile:
cat Dockerfile
FROM fedora
MAINTAINER tester
RUN yum -y update yum clean all
RUN yum -y install httpd
When I am running
docker build -t test .
I get:
Sending build context to
Hi,
I have Fedora 21 (x86_64).
Under /usr/lib/modules/3.17.4-302.fc21.x86_64/kernel, all the kernel
module are in compressed form.
(xz files).
Under
/usr/lib/modules/3.17.4-302.fc21.x86_64/kernel, the kernel modules
are in the *.ko form
What are the *.xz compressed kernel modules for ? In
Hello,
I had installed Fedora 21. Each time I boot the system,
fsck is running, which takes almost 5 minutes.
What is the reason ? Can I avoid it ?
Regards,
Kevin
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
I should have mentioned also, that after fsck is completed, the
following messages is displayed:
Welcome to emergency mode! After logging in, type:
journalctl -xb to view system logs,
Give toot password for maintenance
(or press Control-D to continue)
On Sat, Jan 17, 2015 at 10:46 AM, Kevin
, 2015 at 11:01 AM, Ed Greshko ed.gres...@greshko.com wrote:
On 01/17/15 16:55, Kevin Wilson wrote:
I should have mentioned also, that after fsck is completed, the
following messages is displayed:
Welcome to emergency mode! After logging in, type:
journalctl -xb to view system logs,
Give
wrote:
On Sat, Jan 17, 2015 at 2:29 AM, Kevin Wilson wkev...@gmail.com wrote:
It is ext4 on /work
OK so it's not root, which means you can just umount it and run e2fsck
without booting from alternate media.
I can't tell from the journal output, which appears incomplete as it
has no mention
systemctl restart sddm.service
Yup, this did the job in F21 @ home
Kevin
On Thu, Jan 8, 2015 at 7:48 AM, Ed Greshko ed.gres...@greshko.com wrote:
On 01/08/15 13:40, Kevin Wilson wrote:
I have F21 with KDE (installed by getting KDE defaults, (yum install
@kde). How do I restart the windows
Hi,
I have F21 with KDE (installed by getting KDE defaults, (yum install
@kde). How do I restart the windows manager ?
Regards,
Kevin
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora
Hello, Fedora users,
I looked in the fedora mirror sites for DVD of F21 src rpms, and could not find.
For F20 there were DVD of F21 src rpms on fedora mirrors.
There are vailable single src rpms in Fedora mirror sites.
For fedora 21, are these source rpms DVD not exist anymore on fedora
Hello,
I installed F21 server, x86_64.
Now, as expected from a server, it does not contain kde or gnome.
I know that server usually does not need to run XWindows applications.
However, I need from time to time to use xwindows applications on the
server, like some
monitoring tools (wireshark and
Hi,
yum install -y @base-x
solved it
Thanks.
On Thu, Dec 11, 2014 at 9:47 PM, Kevin Fenzi ke...@scrye.com wrote:
On Thu, 11 Dec 2014 20:49:35 +0200
Kevin Wilson wkev...@gmail.com wrote:
Hello,
I installed F21 server, x86_64.
Now, as expected from a server, it does not contain kde
Hi,
I am using
journalctl -kf or journalctl -k
to see kernel log messages.
However, messages of pr_debug are not shown by this commands.
Is there some way to view pr_debug kernel messages with journalctl -k ?
regards,
Kevin
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe
/30/2014 08:58 AM, Kevin Wilson wrote:
Hi,
Thanks. I checked all three options Rick suggested and none of them
worked.
Does anybody know about a solution which works ?
regards,
Kevin
On Thu, Aug 21, 2014 at 10:57 PM, Rick Stevens ri...@alldigital.com
wrote:
On 08/21/2014 11:33 AM, Kevin
Hi,
Thanks. I checked all three options Rick suggested and none of them
worked.
Does anybody know about a solution which works ?
regards,
Kevin
On Thu, Aug 21, 2014 at 10:57 PM, Rick Stevens ri...@alldigital.com wrote:
On 08/21/2014 11:33 AM, Kevin Wilson issued this missive:
HI,
Each time
HI,
Each time I ssh with a putty client from windows to Linux Fedora 20, I
get the following
messages in the /var/log/messages file:
sshd[772]: pam_unix(sshd:session): session opened for user xxx by (uid=yyy)
Is there a way to prevent this messages ?
Regards,
Kevin
--
users mailing list
Hello, Fedora users,
I want to run a binary of some Fedora application I wrote immediately
after reboot.
I know that as a workaround I can wrap it as a systemd daemon, but I
prefer not to.
In previous fedora distros, making it run across reboots was enabled
by adding an entry
in /etc/rc.local.
Hi,
Thanks a lot!
Should it have #!/bin/bash as its first line ?
Kevin
On Fri, Aug 8, 2014 at 12:33 PM, Ed Greshko ed.gres...@greshko.com wrote:
On 08/08/14 17:28, Kevin Wilson wrote:
I want to run a binary of some Fedora application I wrote immediately
after reboot.
I know
Hi,
I saw that there is apparmor support for Ubuntu and for openSuse.
I could not find rpm packages for Fedora.
Is it possible to use Apparmor on Fedora 20 by building
from source code ?
regards,
Kevin
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription
Hi,
I installed today Fedora 20 on i686 machine.
When I ran uname -r I so that the kernel
I have is: 3.11.10-301.fc20.i686 + PAE
Is the PAE kernel for i686 the default one ? or maybe I missed
something in the installation ?
regards,
Kevin
--
users mailing list
users@lists.fedoraproject.org
To
I have fedora 20, and when I connect a wireless usb nic, I get this messages:
Jan 4 21:33:08 localhost kernel: [ 273.797184] ieee80211 phy0:
rt2x00_set_chip: Info - Chipset detected - rt: 2573, rf: 0002, rev:
000a
Jan 4 21:33:09 localhost kernel: [ 273.893135] usbcore: registered
new
Hello,
Following the question about chromium installation in F20 recently in
this mailing list, but not related directly to it (and this is the
reason that I post it as a separate thread):
What are the benefits of using Chroimium over using google stable
chrome on Fedora ? Especially, are there
Hello,
I installed Fedora 20 on x86_64.
I try to access with firefox a radio audio broadcast that was recorded
and is on the site now.
I see this message:
The following plugin is required: Microsoft Media Server (MMS) protocol source.
Do you want to search for this now ?
I press yes
and I get:
Hello all,
I tried to install Fedora 20 on Lenovo N500 laptop (x86_64) from a DVD.
I verified the DVD media and also I had installed a desktop today with this
DVD.
When I try to install it on Lenovo N500 laptop (x86_64) it fails - it reboots.
I tried several times.
I also tried in text mode
:
Kevin Wilson wkev...@gmail.com writes:
Hi
inserting the card after the reader is plugged in did not change
anything, still cannot read it.
It is 2GB SD card of SanDisk.
Take the card out and put it back in until it is detected --- give it a
few seconds to detect the card. Try to plug
Hello,
I have fedore 18.
When I insert an SD reader with an sdc card (SanDisk), I get the
following messages in syslog (however, fdisk -l or df -h do not show
the sd device, only one hard disk sata device):
Dec 6 20:02:51 a kernel: [ 85.667051] usb 1-10: new high-speed USB
device number 4
Hi
inserting the card after the reader is plugged in did not change
anything, still cannot read it.
It is 2GB SD card of SanDisk.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code
Running
[~]# lsblk
shows no sdc:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sda 8:00 232.9G 0 disk
ââsda1 8:10 29.3G 0 part
ââsda2 8:20 19.5G 0 part /
ââsda3 8:30 146.5G 0 part
ââsda4 8:40 1K 0 part
ââsda5 8:50 9.8G 0 part
ââsda6 8:60
Hi,
I have installed libreswan 3.3-1 on fc18 from RPM.
How do I start the libreswan service on Fedora ?
I tried:
systemctl status libreswan.service
libreswan.service
Loaded: error (Reason: No such file or directory)
Active: inactive (dead)
regards,
Kevin
--
users mailing list
Hello,
I have fedora 18 with Gnome on a laptop.
After some short time (few minutes) of inactivity it enters the idle
state , and when clicking it asks for a password.
Is there a way to make that time interval longer ?
regards,
Kevin
--
users mailing list
users@lists.fedoraproject.org
To
. an Asus router has Enable UPnP option in IP settings.
2013/7/5 Kevin Wilson wkev...@gmail.com
Hello,
I see that from time to time I get in fedora 18 this traffic:
SSDP - Simple Service Discovery Protocol
every 2-3 minutes a couple of frames for address: 239.255.255.255.
I tried to disable
Hello,
I see that from time to time I get in fedora 18 this traffic:
SSDP - Simple Service Discovery Protocol
every 2-3 minutes a couple of frames for address: 239.255.255.255.
I tried to disable bluetooth with no help.
google shows that this might be some upnp client, but I don't know how
to
Hello,
I try:
ping -R www.google.com
I get:
PING www.google.com (173.194.113.112) 56(124) bytes of data.
but the list of nodes does not appear, and I wait for more than 5 minutes.
traceroute www.google.com gives immediately the list of nodes.
This is fedora 18, iptables stopped (and
Hi all,
I am trying to assign key to switching between
languages on Fedora 18.
With previous Fedora releases, 17 and down, I did it with both shift keys.
Now, when I go to Regional and Language settings-shortcuts,
Switch to next source is defined as Alt+1
Pressing Alt+1 indeed change languages;
Hi,
... It is Mate...
rgs,
Kevin
On Sat, May 11, 2013 at 6:55 PM, Patrick O'Callaghan
pocallag...@gmail.com wrote:
On Sat, 2013-05-11 at 16:55 +0300, Kevin Wilson wrote:
Hi all,
I am trying to assign key to switching between
languages on Fedora 18.
With previous Fedora releases, 17 and down
Hi,
I have HP 4500 -G510n-z printer
what are fax management sw which are capable for
sending/getting fax ?
I saw on the web that efax is not so good and is limited to certain models.
rgs,
Kevin
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
Hello,
I have fedora 18.
After boot, running mount | grep fuse
shows:
gvfsd-fuse on /run/user/0/gvfs type fuse.gvfsd-fuse
(rw,nosuid,nodev,relatime,user_id=0,group_id=0)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
do I need the second mount (fusectl mount ) ? How can I
Hi,
What is the shortcut for restarting the X server?
In old fedora distros it was alt + ctrl + left arrow.
Now it does not work and there is no such shortcut in System
setting-keyboard-shortcuts.
rgs,
Kevin
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change
On Tue, Mar 5, 2013 at 1:34 PM, Reindl Harald h.rei...@thelounge.net wrote:
Am 05.03.2013 12:32, schrieb Kevin Wilson:
Hi,
What is the shortcut for restarting the X server?
In old fedora distros it was alt + ctrl + left arrow.
Now it does not work and there is no such shortcut in System
setting
Hi , all,
I am working with Fedora 18 in fallback mode (classical mode) of gnome.
I cannot set a panel keyboard indicator. There is no such option from the panel
dialog. In older Fedora distributions there was such an option.
Is there a way to achieve this ?
rgs,
Kevin
--
users mailing list
Hi,
What do you mean by telling if UEFI is active you can't run
dmidecode. What happens when you run dmidecode on a console of a
machine where UEFI is active? do you get an an
error ?
rgs
Kevin
On Tue, Feb 19, 2013 at 11:41 PM, Bill Davidsen david...@tmr.com wrote:
Kevin Wilson wrote:
Hi
...@sterndata.com wrote:
On 02/18/2013 07:30 AM, Kevin Wilson wrote:
Hi,
Is there a way to know without entering BIOS, whether your machine supoports
UEFI or not ? I would appreciate if someone with a machine with UEFI
support will check whether when running dmidecode you see UEFI in the
output
Hi all,
Did anyone tried to install LXR on fedora 18/17?
I am following the manual, and starting the httpd service with no errors.
But browsing http://local/lxr does not show the lxr templates as expected.
rgs,
Kevin
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change
Hi,
How should I wake up after pm-hibernate on Fedora 18 ?
Is there some button/special combination of buttons I should use ?
rgs,
Kevin
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Kevin Wilson wkev...@gmail.com napisał(a):
Hi,
How should I wake up after pm-hibernate on Fedora 18 ?
Is there some button/special combination of buttons I should use ?
rgs,
Kevin
power on computer
--
Jan Litwiński
http://netsjanek.blogspot.com/
http://netsjanek.bloog.pl/
Linux is like
Hi,
The same is with my desktop - can only be waken up from
suspend by the power-on button.
kw
On Wed, Feb 20, 2013 at 7:31 PM, Andras Simon sza...@gmail.com wrote:
2013/2/20, Jan Litwiński jlitwin...@vp.pl:
with pm-hibernate you can power on computer, with pm-suspend press any
keyboard key
Hi,
Fitbit Unix thread on their forum
Excuse me for my ignorance - can you give a link to this forum?
rgs
Kevin
On Tue, Dec 18, 2012 at 8:20 PM, Robert Moskowitz r...@htt-consult.com wrote:
to
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
Hello,
I did the following on x86_64 fedora machine:
- downloaded ppp-2.4.5-22.fc17.src.rpm
ran: rpm -ivh ppp-2.4.5-22.fc17.src.rpm
then
rpmbuild -bp --target=x86_64 /root/rpmbuild/SPECS/ppp.spec
then
cd /root/rpmbuild/BUILD/ppp-2.4.5
./configure
make
got this error:
d chat; make all
make[1]:
of it (in the standard way,
as I described above). Why can't I rely on that there will be know
errors and no manual intervention as needed in the ppp case ?
rgs
Kevin
On Sun, Dec 16, 2012 at 12:50 PM, Heinz Diehl h...@fritha.org wrote:
On 16.12.2012, Kevin Wilson wrote:
make[1]: Entering
Hello,
rpmbuild --rebuild ppp-2.4.5-22.fc17.src.rpm WORKED for me;
the executables were generated under /root/rpmbuild/BUILD/ppp-2.4.5
I don't know the difference between
rpmbuild -bb ppp.spec or at least
and rpmbuild -bc ppp.spec.
rgs
Kevin
On Sun, Dec 16, 2012 at 5:00 PM, Michael Schwendt
Hi,
Thanks for the advice. I am well aware of it. This machine is a
testing machine with very
little which is important and it is backed up and I intend to isntall
there f18 in a month anyway.
Forgive me my ignorance: quick question: does
rpmbuild --rebuild
includes running make install? I did not
there.
But with ppp it failed.
Is there a flag which tells rpbuild not to build but not to run make install ?
rgs
KW
Do
On Sun, Dec 16, 2012 at 8:38 PM, Reindl Harald h.rei...@thelounge.net wrote:
Am 16.12.2012 19:33, schrieb Kevin Wilson:
Thanks for the advice. I am well aware of it.
so why ignore
...@fedoraproject.org wrote:
On Sun, Dec 16, 2012 at 09:24:21PM +0200, Kevin Wilson wrote:
Last one, really:
suppose I want to build a source rpm. I do not
want to run make install as I do want to keep my orig binaries.
So what should I do ?
this is in fact the reason that I tried
rpmbuild -bp specFile
Thanks.
What do you mean by repeatable environment.?
KW
On Sun, Dec 16, 2012 at 9:37 PM, Matthew Miller
mat...@fedoraproject.org wrote:
repeatable environment.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
Hi,
Status is:
hciconfig on the fedora machine shows that the bt device is UP RUNNING
PSCAN
and has a valid BD address.
I can make a bluetooth scan from Fedora (hcitools scan) and see the Android
phone.
On the other hand, scannning from Android does not find the fedora machine.
Any advice on why
Hi,
I am running hostapd on top of backfire (hostapd) on WRT54GL LinkSys device
with b43 driver.
I have very simple, minimalistic hostapd configuration.
Now , I run on the LinkSys device:
hostapd /etc/hostapd.conf
and it starts OK.
On a nearby Fedora 17 Linux machine I insert wifi USB card, and
Hi,
Thanks!
Why do you think that disk manager is better than
static entry in /etc/fstab ?
rgs,
Kevin
On Tue, Sep 18, 2012 at 12:52 AM, Mateusz Marzantowicz
mmarzantow...@osdf.com.pl wrote:
On 17.09.2012 19:47, Kevin Wilson wrote:
Hello,
When I insert a disk on key into a desktop running
Hello,
When I insert a disk on key into a desktop running
Fedora release 17 it is mounted under
/run/media/root/B5A2-5890
Is there a way for setting a different path when inserting a disk on key
into fedora 17 ?
rgs,
Kevin
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or
Hi
I am trying to add a language in Ferdora, but the new language is not kept
I go to
System Settings
Region and language
Press + and select Dansih from the list.
Then close the dialog window.
After I open the dialog window again, the new language I added does not appear
I tried the same with
hi,
my application menu disappeared from the panel in fedora 15.
what should I do to restore it ?
rgs,
Kevin
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines:
Gnome
(gnome 3 i believe , whatever comes with F15) I forget how to check
which version of gnome is it)
On Sun, Jul 29, 2012 at 3:35 PM, Ed Greshko ed.gres...@greshko.com wrote:
On 07/29/2012 08:14 PM, Kevin Wilson wrote:
my application menu disappeared from the panel in fedora 15.
what
Hi, everyone,
I have a question about UEFI in fedora 18: I see in lwn.net article:
Fedora's strategy is to enroll in Microsoft's developer program,
which allows the project to purchase an approved $99 key through
Verisign, a key which will be recognized by UEFI secure boot. The key
will be used
Hi,
Than a lot for your quick answer!
kevin
On Sat, Jul 7, 2012 at 11:07 AM, Frank Murphy frankl...@gmail.com wrote:
On 07/07/12 08:57, Kevin Wilson wrote:
see
http://lwn.net/Articles/503803
That this means that from F18 on, fedora will cost 99$ for every
installation?
Discussion
Hi,
I know that this is strongly discouraged; Yet, I am working in a
closed WAN and I want to
run VLC as root. How can I achieve it ? Is there a way (beside building VLC ?)
rgs,
Kevin.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
Hi,
I have a laptop on which I have fedora 15. This laptop is not strong,
so I prefer having gnome-3 fallback mode on it.
I tried to create an application launcher on the desktop.
when I click the right button, when the mouse is on the desktop,
nothing happens.
With Fedora 14, this opened the
Hi,
Is there a way to disable automount of diskonkey on Fedora 15?
Whenever I insert diskOnKey, it is automounted. I want to avoid it.
How ?
rgs,
Kevin
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
Hi,
I tried twice in fedora 15, gnome 3 , to add an application launcher
to favorites of the side panel by right-click on an application
launcher and select dd To Favorites.
An application launcher was indeed added to favorites of the side panel.
However, after boot, the application launcher
Hello,
Is there a way to access MS Exchange 5.5 mail server from Fedora 15?
I saw that for previous versions of Evolution there was a plugin called
evolution-brutus plugin - for exchange 5.5 server
but from what I found, this plugin is not available for fedora 15.
I also tried with thunderbird,
Hi,
Thanks, can you/someone elaborate a bit ? what should I do to get mail
with IMAP?
rgs,
kevin
On Sat, Jul 16, 2011 at 8:14 PM, Steven Stern
subscribed-li...@sterndata.com wrote:
On 07/16/2011 05:56 AM, Kevin Wilson wrote:
Hello,
Is there a way to access MS Exchange 5.5 mail server from
Hello,
I want to assign the action Hide all normal windows and set
focus to the desktop to the windows left button (Super_L).
I have Fedora 12 with Gnome and metacity. In previous Fedora releases,
like 8 or 8 (or maybe also 10/11, not sure ), I could do this by
simply going to
99 matches
Mail list logo