I have one contact that uses an email client that sends everyting in QP-
encoded. Unfortunately she is also one of the more important contacts I have.
Apparently KMail chokes on these messages and displays nothing (apart from a
boilerplate message which isn't QP encoded).
How do I get KMail to
On 12/25/2013 12:32 AM, Martin S wrote:
I have one contact that uses an email client that sends everyting in QP-
encoded. Unfortunately she is also one of the more important contacts I have.
Apparently KMail chokes on these messages and displays nothing (apart from a
boilerplate message which
Hello, Everyone
During my most recent re-boot, SELinux relabled my entire filesystem.
Which would be fine, except for the fact that I have SELinux disabled
on my system:
# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
# enforcing -
Hello, Everyone
I don't know if this happens every time I log out and then back in, but
it has happened a few times. When I type in my password and hit enter,
a little box pops up that says pam_nologin(8) This is kind of
annoying, because the only workaround that I have found thus far is
Hello Everyone,
I hit Ctrl | Alt | F2 to get to a non-graphical console. For a long
time now, pressing Alt | F1 would bring me back to the graphical
environment. Since I fedup'd to Fedora 20, lots of times (maybe not
always) when I press Alt | F1 instead of being taken back to
graphical mode, I
On Wed, 25 Dec 2013 05:28:10 -0600
Steven P. Ulrick meow8...@gmail.com wrote:
Hello, Everyone
I don't know if this happens every time I log out and then back in,
but it has happened a few times. When I type in my password and hit
enter, a little box pops up that says pam_nologin(8) This is
Allegedly, on or about 25 December 2013, Steven P. Ulrick sent:
I hit Ctrl | Alt | F2 to get to a non-graphical console. For a long
time now, pressing Alt | F1 would bring me back to the graphical
environment. Since I fedup'd to Fedora 20, lots of times (maybe not
always) when I press Alt |
Allegedly, on or about 24 December 2013, Robert Moskowitz sent:
The super glue got one out, but still ruined the screwdriver.
Next time try mildly tapping the back of the screwdriver handle with
another screwdriver handle, a few times, while you try to unscrew. You
may just crack the
On Wed, Dec 25, 2013 at 05:56:58AM +, Frank Murphy wrote:
On Wed, 25 Dec 2013 06:30:22 +0100
lee l...@yun.yagibdah.de wrote:
A system cannot correctly function without a way for such processes
to send email.
Yes, they can. Cron can work whether you know about it or not
eg.
Sorry this is off topic.
I am trying to setup OVM (Oracle VM hypervisor) as a nested hypervisor
under KVM. OVM installed once I change the network card to e1000 but gives
udev trace errors when booting. I have tried several HW combinations, none
work.
Nesting KVM works without any issues.
Any
On Tue, 24 Dec 2013 14:32:17 -0500, Robert P. J. Day wrote:
I run fetchmail with option mda /usr/bin/procmail -t -f -
to deliver (and filter) via procmail.
hmmm ... i may try that. i assume that, with this approach, i
won't need to install sendmail, correct?
Correct.
and if i
On 25.12.2013, Michael Schwendt wrote:
I run fetchmail with option mda /usr/bin/procmail -t -f -
to deliver (and filter) via procmail.
hmmm ... i may try that. i assume that, with this approach, i
won't need to install sendmail, correct?
Correct.
Using MUAs like Alpine,
On Wed, 25 Dec 2013, Michael Schwendt wrote:
On Tue, 24 Dec 2013 14:32:17 -0500, Robert P. J. Day wrote:
I run fetchmail with option mda /usr/bin/procmail -t -f -
to deliver (and filter) via procmail.
hmmm ... i may try that. i assume that, with this approach, i
won't need to
Hello,
I dupliqued a distribution.
I propably need to relabel the partitions.
and/or run restorecon
How I do it in fedora19 ?
Thank.
===
Patrick DUPRÉ | | email: pdu...@gmx.com
Laboratoire
Reason:
-Discovered linux/old fedora system was hacked.
-Quick run of rkhunter/chkrootkit revealed hacks,
plus the root passwd changed, as well as other issues.
Resolution/Steps to recover:
-remove the machine
-given machine was laptop, with 2.5 drive,
make a couple of copies of the complete
On Tue, 24 Dec 2013 22:00:27 +1300
Rolf Turner r.tur...@auckland.ac.nz wrote:
On 24/12/13 21:58, Frank Murphy wrote:
On Tue, 24 Dec 2013 21:56:22 +1300
Rolf Turner r.tur...@auckland.ac.nz wrote:
People keep sending me links to videos and then when I click on
them Firefox says that the
Hi.
Anyone have pointers to a script that I can use/modify to allow me to
restore/replicate an install once I have a system working.
I'm looking into chef/puppet/etc.. but wondered if others might have
thoughts on this.
Actually, something that would not only install the OS, but also copy
files
On 12/25/2013 09:34 PM, bruce wrote:
Hi.
Anyone have pointers to a script that I can use/modify to allow me to
restore/replicate an install once I have a system working.
If the working system is a VM, it would be easy. :-)
What about some P2V then V2V tool?
--
users mailing list
(note: i was tempted to post this to the virt list but i suspect
it's something fairly trivial so i'll stick with the basic fedora
list, at least for now.)
on my new fedora 20 system, i installed all the crucial virt
packages with:
# yum groupinstall Virtualization
then fired up VMM and
Hi everyone!
Merry Christmas!
I have successfully installed bumblebee on my F20 laptop according to
https://fedoraproject.org/wiki/Bumblebee.
I use my laptop mostly as xen server with F20 dom0, and in this setup
optirun fails with error accessing seconary GPU and secondary X server, but
it works
On 24/12/13 22:14, Matthew Saltzman wrote:
On Tue, 2013-12-24 at 21:56 +1300, Rolf Turner wrote:
[Looking for Flash Player]
Grateful for any suggestions and/or advice.
Googling didn't turn this up?
https://fedoraproject.org/wiki/Flash
Well, not as such. Googling turns up (as always) several
... snip ...
i've started keeping my own fedora 20 HOWTO page, and here's my
snippet on getting flash to work:
http://www.crashcourse.ca/wiki/index.php/F20#Flash
i followed the instructions on the linked-to page and it just worked.
don't forget that you have to completely close firefox and
On 26/12/13 10:40, Robert P. J. Day wrote:
... snip ...
i've started keeping my own fedora 20 HOWTO page, and here's my
snippet on getting flash to work:
http://www.crashcourse.ca/wiki/index.php/F20#Flash
i followed the instructions on the linked-to page and it just worked.
don't forget
On 26/12/13 07:24, Peter Reed wrote:
SNIP
I had to do this:
sudo ln
-s /usr/lib64/flash-plugin/libflashplayer.so /usr/lib64/mozilla/plugins
when i ran into this problem.
Thanks but that's not the problem. I had a look and that symbolic link
is already in place.
cheers,
Rolf
Sorry for top posting but this phone doesn't allow bottom posting.
I too use F17. What I did was download the rpm from adobe and used rpm to
install. Flash works just fine except on cp24.com of the sites I visit that
requires flash.
Yum complains but still works and hasn't caused problems.
On 26/12/13 10:58, davidscha...@mobilicity.blackberry.com wrote:
Sorry for top posting but this phone doesn't allow bottom posting.
I too use F17. What I did was download the rpm from adobe and used rpm to
install. Flash works just fine except on cp24.com of the sites I visit that
requires
On 24.12.2013, Rolf Turner wrote:
WTF do I have to do?
1. Download the latest Flash plugin
2. Copy libflashplayer.so to ~/.mozilla/plugins
3. Restart Firefox
You're done.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
On 12/25/2013 4:56 PM, Rolf Turner wrote:
On 26/12/13 07:24, Peter Reed wrote:
SNIP
I had to do this:
sudo ln
-s /usr/lib64/flash-plugin/libflashplayer.so /usr/lib64/mozilla/plugins
when i ran into this problem.
Thanks but that's not the problem. I had a look and that symbolic
On 25.12.2013, Heinz Diehl wrote:
1. Download the latest Flash plugin
http://get.adobe.com/de/flashplayer/
You choose the .tar.gz archive.
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
On Wed, 25 Dec 2013 18:46:35 +0100
Patrick Dupre pdu...@gmx.com wrote:
Hello,
I dupliqued a distribution.
I propably need to relabel the partitions.
and/or run restorecon
How I do it in fedora19 ?
Thank.
sudo fixfiles onboot # then reboot
--
Regards,
Frank
www.frankly3d.com
--
On 26/12/13 11:16, Heinz Diehl wrote:
On 24.12.2013, Rolf Turner wrote:
WTF do I have to do?
1. Download the latest Flash plugin
2. Copy libflashplayer.so to ~/.mozilla/plugins
3. Restart Firefox
You're done.
And later added:
1. Download the latest Flash plugin
On Dec 25, 2013, at 4:25 AM, Steven P. Ulrick meow8...@gmail.com wrote:
Hello, Everyone
During my most recent re-boot, SELinux relabled my entire filesystem.
Which would be fine, except for the fact that I have SELinux disabled
on my system:
# This file controls the state of SELinux on
Greetings. I evidently did not pay enough attention when I recently
installed Fedora 20 on my desktop system, as my system appears to be set
for the GB locale. E.g.,
$ env | grep LANG
LANG=en_GB.utf8
GDM_LANG=en_GB.utf8
Likewise, the following:
$ cd /etc
$ find . -type f -exec grep GB {}
Hello,
I wanted to clone my distribution fedora 19, I used to do it with
previous release but I failed with fedora 19.
I copy (-a) the partition / (lvm2) and /boot (ext4)
I ran:
grub2-mkconfig -o /boot/grub2/grub.cfg
fixfiles relabel (the new partitions)
the file grub.cfg seems OK.
To try to
On Dec 25, 2013, at 5:48 PM, Patrick Dupre pdu...@gmx.com wrote:
Hello,
I wanted to clone my distribution fedora 19, I used to do it with
previous release but I failed with fedora 19.
I copy (-a) the partition / (lvm2) and /boot (ext4)
You probably need to remake the initramfs. The
On Wed, Dec 25, 2013 at 11:51 PM, Michael Hannon
jmhannon.ucda...@gmail.com wrote:
Greetings. I evidently did not pay enough attention when I recently
installed Fedora 20 on my desktop system, as my system appears to be set for
the GB locale. E.g.,
$ env | grep LANG
LANG=en_GB.utf8
There have been a few things going weird on this Lenovo x120e and I
thought it may have been f17. But now with f20 kind of installed, and
with the problems i had getting anything installed, I think I may really
have flaky hardware. Here are the problems.
Probably the worst is I can't write
On Dec 25, 2013, at 9:16 PM, Robert Moskowitz r...@htt-consult.com wrote:
Lenovo x120e
https://wiki.archlinux.org/index.php/Lenovo_ThinkPad_X120e
Chris Murphy
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
On 12/25/2013 8:16 PM, Robert Moskowitz wrote:
install the i386; lots of failures and bug reports on the x86_64
install attempts.
Happy Holidays
While back somebody brought me their system to take a look why
they were having problems
turned out their ram went bad, it would
On 12/25/2013 11:31 PM, Chris Murphy wrote:
On Dec 25, 2013, at 9:16 PM, Robert Moskowitz r...@htt-consult.com wrote:
Lenovo x120e
https://wiki.archlinux.org/index.php/Lenovo_ThinkPad_X120e
Why thank you. Some interesting things here. Will have to work on some
of the later, but the
On 26.12.2013, Rolf Turner wrote:
Yes It worked. Thank you hugely.
You're welcome!
--
users mailing list
users@lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Fedora Code of Conduct:
Hi,
I have installed this test ldap and I am trying to add UniqueMember
under a PosixGroup
but its saying, i am not allowed bellow is error:
according to the schema attribute uniqueMember is not allowed
I guess, I need to add UniqueueMemberof plugins,
But dont understande the Syntax.
Can any
Extra info :
While looking at net I got this
http://directory.fedoraproject.org/wiki?title=MemberOf_Multiple_Grouping_Enhancementsredirect=no
dn: cn=MemberOf Plugin,cn=plugins,cn=config
...
memberofgroupattr: member
memberofgroupattr: uniqueMember
memberofattr: memberOf
But still it does not
43 matches
Mail list logo
