CqrLog mariadb/mysql

Upgraded into F27 my test computer. Went smooth like summer day. Started to test hamradio logging program, cqrlog. It wont start because of " Error during connection to database: Can not load default MySQL library ("libmysqlclient.so.16" or "libmysqlclient.so"). Check your installation." Mariadb

Re: dnf gone wild??

I wrote: It looks to me that they have all sorts of spurious provides: $ rpm -qp --provides plexmediaserver-1.9.7.4460-a39b25852.x86_64.rpm [... snipped long list of spurious provides ...] Someone should file an issue with the plex.tv folks and point them at the documenation for filtering

Re: HP Intel i5-8250U laptop - No audio

Ok, some updates... If I plug earbuds into the headphone jack it works fine. When playing a wav file using aplay, everything VISUALLY works (gui meters go up and down). It looks like a problem with the Realtek ALC295 chipset support. Some people had "crackling" audio which could be fixed by

Re: Virtual network bridge stopped working after upgrading to F27

On 11/16/2017 07:50 PM, Sam Varshavchik wrote: Now, with the crisis averted, I'd like to figure out how to get my Windows VM back on the LAN, with its own static IP address. Usually, bridged networking can be set up with virsh: virsh iface-bridge eth0 br0 --no-stp

[389-users] Re: performance tuning

Hi William,Thanks much for the quick response! This is super helpful. I’m attaching my cpu and meminfo info.dn: cn=monitor,cn=ldbm database,cn=plugins,cn=config^ This monitors the general BDB performance.Got it.dn: cn=monitor,cn=changelog,cn=ldbm database,cn=plugins,cn=configdn:

Virtual network bridge stopped working after upgrading to F27

I have a server with a KVM/Qemu VM running Windows that I need to be reachable by other machines on my LAN. A long time I stumbled my way into making it happen. I am a bit fuzzy on the details, but I ended up creating a virtual network bridge of some kind. Well, this whole thing broke

[389-users] Re: performance tuning

On Thu, 2017-11-16 at 21:00 -0600, Sergei Gerasenko wrote: > Hi, > > I’ve been trying to estimate how optimal our settings are. I’ve read > about the cn=monitor section and I see that there are several paths > that have cn=monitor: These are all monitors for each database backend. So you have:

Re: Fedora 26 to 27: Update problem.

Gordon Messmer writes: On 11/16/2017 03:34 PM, Sam Varshavchik wrote: This explains why someone else managed to upgrade a wireless laptop without networking. Something is going horribly sideways here. 'system-upgrade reboot' is whining only about my local repo: Does your repository

Re: Unable to remove packages before upgrade to F27

On 11/16/2017 06:12 PM, Rick Stevens wrote: I'm trying to upgrade a machine to F27 but the upgrade process keeps bitching about two packages: ICAClient-13.3.0.344519-0.x86_64 and aether-ant-tasks-1:1.0.1-6.fc26.noarch. Are you upgrading from the command line? If so, then what is the dnf

[389-users] performance tuning

Hi, I’ve been trying to estimate how optimal our settings are. I’ve read about the cn=monitor section and I see that there are several paths that have cn=monitor: dn: cn=monitor,cn=ldbm database,cn=plugins,cn=config dn: cn=monitor,cn=changelog,cn=ldbm database,cn=plugins,cn=config dn:

[389-users] Re: ip address based aci

On Mon, 2017-11-13 at 10:34 +0100, Jan Kowalsky wrote: > Hi William, > > thanks a lot for clearing. Sorry for the very late response! I have been quite busy :( > > Am 13.11.2017 um 00:42 schrieb William Brown: > > On Sun, 2017-11-12 at 23:06 +0100, Jan Kowalsky wrote: > > > On some comments I

Re: Unable to remove packages before upgrade to F27

On 11/17/17 10:12, Rick Stevens wrote: > Ok, now I need some help. > > I'm trying to upgrade a machine to F27 but the upgrade process keeps > bitching about two packages: ICAClient-13.3.0.344519-0.x86_64 and > aether-ant-tasks-1:1.0.1-6.fc26.noarch. > > The first one does not show up as installed

Unable to remove packages before upgrade to F27

Ok, now I need some help. I'm trying to upgrade a machine to F27 but the upgrade process keeps bitching about two packages: ICAClient-13.3.0.344519-0.x86_64 and aether-ant-tasks-1:1.0.1-6.fc26.noarch. The first one does not show up as installed in dnf, rpm, yum or pkcon and I surely don't recall

Re: Horrible keyboard in virtual machine

On 11/17/17 08:18, Tom Horsley wrote: > I'm trying to install the f27 workstation live > image onto disk in a virtual machine (hosted on > f26). > > It is impossible to type the passwords in the > root and new user screens. It gets so bogged down > it apparently thinks I've been holding down keys

Re: dnf gone wild??

Patrick O'Callaghan wrote: On Thu, 2017-11-16 at 18:53 -0500, Todd Zullinger wrote: I didn't know that Plex provided a repo. I've only ever seen them provide rpm files. Is there an official plex repo or did you import the rpm into a local repo? $ cat /etc/yum.repos.d/plex.repo [PlexRepo]

Horrible keyboard in virtual machine

I'm trying to install the f27 workstation live image onto disk in a virtual machine (hosted on f26). It is impossible to type the passwords in the root and new user screens. It gets so bogged down it apparently thinks I've been holding down keys which I haven't been holding down. I keep getting

Re: dnf gone wild??

On Thu, 2017-11-16 at 18:53 -0500, Todd Zullinger wrote: > Neal Becker wrote: > > sudo dnf repoquery --provides plexmediaserver > > reports nothing > > I didn't know that Plex provided a repo. I've only ever seen them > provide rpm files. Is there an official plex repo or did you import >

Re: Fedora 26 to 27: Update problem.

On 11/16/2017 03:34 PM, Sam Varshavchik wrote: This explains why someone else managed to upgrade a wireless laptop without networking. Something is going horribly sideways here. 'system-upgrade reboot' is whining only about my local repo: Does your repository configuration specify a very

Re: dnf gone wild??

Neal Becker wrote: sudo dnf repoquery --provides plexmediaserver reports nothing I didn't know that Plex provided a repo. I've only ever seen them provide rpm files. Is there an official plex repo or did you import the rpm into a local repo? So just rpm -e --no-deps? That seems

Re: Fedora 26 to 27: Update problem.

On 11/16/2017 02:47 PM, John Pilkington wrote: https://bugzilla.redhat.com/show_bug.cgi?id=1513111 The bug appears to be that dnf processes the last metadata update time while in the offline system-upgrade mode.  I was able to work around the problem by re-running "dnf system-upgrade

Re: Fedora 26 to 27: Update problem.

John Pilkington writes: On 16/11/17 22:33, Dario Lesca wrote: Il giorno gio, 16/11/2017 alle 13.39 -0500, Sam Varshavchik ha scritto: Looks like this is going to be a common, very, very popular bug. Pretty sure this is bug 1513111. "system-upgrade reboot" apparently now requires a fully

Re: dnf gone wild??

Strange, sudo dnf repoquery --provides plexmediaserver reports nothing So just rpm -e --no-deps? ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org

Re: Fedora 26 to 27: Update problem.

On 16/11/17 22:33, Dario Lesca wrote: Il giorno gio, 16/11/2017 alle 13.39 -0500, Sam Varshavchik ha scritto: Looks like this is going to be a common, very, very popular bug. Pretty sure this is bug 1513111. "system-upgrade reboot" apparently now requires a fully working network stack,

Re: Fedora 26 to 27: Update problem.

Il giorno gio, 16/11/2017 alle 13.39 -0500, Sam Varshavchik ha scritto: > Looks like this is going to be a common, very, very popular bug. > Pretty sure > this is bug 1513111. > > "system-upgrade reboot" apparently now requires a fully working > network stack, because it tries to resynchronize

Re: Fonts in F27

On 15/11/17 17:33, Gordon Messmer wrote: After upgrading to F27, I noticed that fonts looked "off".  I made a screenshot of Thunderbird and gnome-terminal displaying roughly identical contents on Fedora 25, 26, and 27.  The older two releases are identical, but F27's fonts (both fixed-width

Re: Reusing downloaded packages for multiple system-upgrades

I'm not a squid expert but I managed to piece this together... Here's my modifications to the default config: # diff -Nau squid.conf.default squid.conf --- squid.conf.default 2017-06-20 03:28:44.0 -0500 +++ squid.conf 2017-07-27 16:18:12.003697590 -0500 @@ -62,7 +62,7 @@ http_port

nvidia drivers on fedora 27

I did a clean install of fedora 27 . I install the nvidia driver for the 960 card from rpmfusion . after I did a reboot my computer starts really slow . the mouse starts locking up moving very slow . dose any one know what it could be and how to fix it ? -- William Biggs bbi...@fastmail.com

Re: dnf gone wild??

Neal Becker wrote: Matthew Miller wrote: On Thu, Nov 16, 2017 at 10:51:42AM -0500, Neal Becker wrote: sudo dnf --setopt=clean_requirements_on_remove=no remove plexmediaserver Just `dnf remove --noautoremove plexmediaserver` will do. See my longer message in this thread for further

Re: Reusing downloaded packages for multiple system-upgrades

Though it has been awhile the best was and may still be a personal mirror. One machine downloads off the web and the rest of the network just uses that system as their mirror. Personal mirror vs. actual mirror is for your application as stated; meaning you don't share it outside your network. You

Re: dnf gone wild??

Matthew Miller wrote: > On Thu, Nov 16, 2017 at 10:51:42AM -0500, Neal Becker wrote: >> >> sudo dnf --setopt=clean_requirements_on_remove=no remove >> >> plexmediaserver >> > Just `dnf remove --noautoremove plexmediaserver` will do. See my longer >> > message in this thread for further

Re: F27 upgrade problem (grub)

On Thu, 16 Nov 2017 18:21:42 +0100 Frank Elsner wrote: > On Thu, 16 Nov 2017 12:12:33 +0100 Frank Elsner wrote: > > Hello, > > > > I've a problem to upgrade my fully updated Fedora 26 to Fedora 27. > > > > dnf system-upgrade download --refresh --releasever=27 gives

Re: fedora-upgrade fails with error: unrecognized arguments: --distro-sync

On Thu, 16 Nov 2017 23:06:33 +0800 Ed Greshko wrote: > On 11/16/17 22:49, Christopher Ross wrote: > > On 16/11/17 14:24, Ed Greshko wrote: > >> On 11/16/17 22:04, Christopher Ross wrote: > >> How about just doing the "approved" method found at > >>

Re: HP Intel i5-8250U laptop - No audio

On Thu, 16 Nov 2017 07:38:27 -0600 Richard Shaw wrote: > I just installed F27 (dual booting with Win 10 that came with it) on > my wife's new laptop and everything seemed fine until she told me the > sound wasn't working. > > I checked the usual stuff, that it was

Re: Fedora 26 to 27: Update problem.

On 16.11.2017 19:39, Sam Varshavchik wrote: > "system-upgrade reboot" apparently now requires a fully working network > stack, because it tries to resynchronize with all the repos, despite > that this is supposed to be done, and it was done, by "system-upgrade > download". i doubt that is a

Re: Fedora 26 to 27: Update problem.

It worked for me on wireless last night. I saw no errors, not sure if the wireless was started at that stage of the upgrade. On Thu, Nov 16, 2017 at 1:46 PM, Terry Polzin wrote: > So wireless won't cut it eh? > > On Thu, Nov 16, 2017 at 1:39 PM, Sam Varshavchik

Re: Fedora 26 to 27: Update problem.

So wireless won't cut it eh? On Thu, Nov 16, 2017 at 1:39 PM, Sam Varshavchik wrote: > Dario Lesca writes: > > > ott 2017 06:39:15 CEST. >> 2017-11-16T15:39:31Z DEBUG Impossibile scaricare ' >> https://mirrors.fedoraproject.org/metalink?repo=updates-rele >>

rsync from F27 box causes higher (30x) cpu on F26 box?

I have been poking at this for some hours, and by now I could use a second opinion. Or clue. Thirteen black candles? Somehow, when I sit on a F27 machine and pull from a F26 machine using rsync, something extremely inefficient happens in the F26 machine. If I sit on a F26 machine and pull from

Re: system upgrade failure: "Failed to synchronize cache for repo 'my', disabling."

Greg Woods writes: system-upgrade downloaded all the packages from the "my" report without any problems, but "system-upgrade reboot" apparently rebooted the server, and the reboot apparently tried to sync again with the repo, but, of course, since the repo is down it failed. I'll

Re: Fedora 26 to 27: Update problem.

Dario Lesca writes: ott 2017 06:39:15 CEST. 2017-11-16T15:39:31Z DEBUG Impossibile scaricare ' https://mirrors.fedoraproject.org/metalink?repo=updates-released- f27=x86_64': Cannot prepare internal mirrorlist: Curl error (6): Couldn't resolve host name for

Re: dnf gone wild??

On Thu, Nov 16, 2017 at 10:51:42AM -0500, Neal Becker wrote: > >> sudo dnf --setopt=clean_requirements_on_remove=no remove > >> plexmediaserver > > Just `dnf remove --noautoremove plexmediaserver` will do. See my longer > > message in this thread for further explanation. > Neither would work -

Re: Upgrade F26 to F27 issue

It was a mistake of mine. After some manual dir removing and retyping the comands, all went regularly. I missed to check for discrete free space on disk. Best regards Luigi Votta P.S. Please make this thread SOLVED! ___ users mailing list --

Re: F27 upgrade problem (grub)

On Thu, 16 Nov 2017 12:12:33 +0100 Frank Elsner wrote: > Hello, > > I've a problem to upgrade my fully updated Fedora 26 to Fedora 27. > > dnf system-upgrade download --refresh --releasever=27 gives > > Error: > Problem: package grub2-efi-1:2.02-0.40.fc26.i686 requires grub2-tools = >

Fedora 26 to 27: Update problem.

I have update my notebook since Fedora 18 to Fedora 26 always without problem. Today I have try to update Fedora 26 to 27, but after download packages and run "dnf system-upgrade reboot", when the system restart the update fail after a while after this boot message: Starting System

Re: system upgrade failure: "Failed to synchronize cache for repo 'my', disabling."

On Thu, Nov 16, 2017 at 6:32 AM, Sam Varshavchik wrote: > > > The "my" repo contains locally-built packages. The repo is on the server > being upgraded here. Normally, apache starts and provides access to the > repo over http. Nothing exotic. > > system-upgrade downloaded

Re: Upgrade F26 to F27 issue

Sorry I missed to say that during the process I've had free space requirements. I don't know, perhaps that can have casued the problem in the process upgrade. I'll try to re-download all Thank you Luigi ___ users mailing list --

Re: dnf gone wild??

Matthew Miller wrote: > On Thu, Nov 16, 2017 at 04:39:01PM +0100, francis.montag...@inria.fr > wrote: >> sudo dnf --setopt=clean_requirements_on_remove=no remove >> plexmediaserver > > Just `dnf remove --noautoremove plexmediaserver` will do. See my longer > message in this thread for

Re: Upgrade F26 to F27 issue

Luigi Votta writes: Hello I just tried to upgrade from F26 to F27. rpmfusion-free and rmpfusion-nonfree Enabled, as with previous dnf system- upgrade ... from F25 to F26 without problems. Today I've the following issue: sudo dnf system-upgrade reboot, reboots two times, but upgrade doesn't

Re: dnf gone wild??

Matthew Miller wrote: > dnf remove plexmediaserver --noautoremove This would still remove 280 packages ___ users mailing list -- users@lists.fedoraproject.org To unsubscribe send an email to users-le...@lists.fedoraproject.org

Re: Upgrade F26 to F27 issue

On 16/11/17 15:33, Luigi Votta wrote: Hello I just tried to upgrade from F26 to F27. rpmfusion-free and rmpfusion-nonfree Enabled, as with previous dnf system-upgrade ... from F25 to F26 without problems. Today I've the following issue: sudo dnf system-upgrade reboot, reboots two times, but

Re: dnf gone wild??

On Thu, Nov 16, 2017 at 04:39:01PM +0100, francis.montag...@inria.fr wrote: > sudo dnf --setopt=clean_requirements_on_remove=no remove plexmediaserver Just `dnf remove --noautoremove plexmediaserver` will do. See my longer message in this thread for further explanation. -- Matthew Miller

Re: dnf gone wild??

On Thu, Nov 16, 2017 at 10:25:38AM -0500, Neal Becker wrote: > [nbecker@nbecker2 ~]$ sudo dnf repoquery --whatrequires plexmediaserver > [nbecker@nbecker2 ~]$ sudo dnf remove plexmediaserver [...] > ... a list of 438 packages!! > Why would dnf want to remove them?!? It thinks that these packages

Re: dnf gone wild??

Hi On Thu, 16 Nov 2017 10:25:38 -0500 Neal Becker wrote: > [nbecker@nbecker2 ~]$ sudo dnf remove plexmediaserver ... > Removing dependent packages: ... > ... a list of 438 packages!! > Why would dnf want to remove them?!? This is I think due to that (from man yum2dnf):

Upgrade F26 to F27 issue

Hello I just tried to upgrade from F26 to F27. rpmfusion-free and rmpfusion-nonfree Enabled, as with previous dnf system-upgrade ... from F25 to F26 without problems. Today I've the following issue: sudo dnf system-upgrade reboot, reboots two times, but upgrade doesn't start. (from journal)

dnf gone wild??

[nbecker@nbecker2 ~]$ sudo dnf repoquery --whatrequires plexmediaserver Last metadata expiration check: 0:04:43 ago on Thu 16 Nov 2017 10:18:39 AM EST. [nbecker@nbecker2 ~]$ sudo dnf remove plexmediaserver Dependencies resolved.

Re: fedora-upgrade fails with error: unrecognized arguments: --distro-sync

On 11/16/17 22:49, Christopher Ross wrote: > On 16/11/17 14:24, Ed Greshko wrote: >> On 11/16/17 22:04, Christopher Ross wrote: >>> >>> >>> On 16/11/17 12:59, Christopher Ross wrote: Today I tried upgrading my x86 laptop from Fedora 26 to 27 but it failed with the following... >>>

Re: fedora-upgrade fails with error: unrecognized arguments: --distro-sync

Den 2017-11-16 kl. 15:04, skrev Christopher Ross: > > > On 16/11/17 12:59, Christopher Ross wrote: >> Today I tried upgrading my x86 laptop from Fedora 26 to 27 but it >> failed with the following... > > > For info, trying again consistently yields the same results. > > > root@nellie

Re: fedora-upgrade fails with error: unrecognized arguments: --distro-sync

On 16/11/17 14:24, Ed Greshko wrote: On 11/16/17 22:04, Christopher Ross wrote: On 16/11/17 12:59, Christopher Ross wrote: Today I tried upgrading my x86 laptop from Fedora 26 to 27 but it failed with the following... For info, trying again consistently yields the same results. Well,

Re: HP Intel i5-8250U laptop - No audio

On Thu, Nov 16, 2017 at 8:24 AM, John Pilkington wrote: > On 16/11/17 13:38, Richard Shaw wrote: > >> I just installed F27 (dual booting with Win 10 that came with it) on my >> wife's new laptop and everything seemed fine until she told me the sound >> wasn't working. >> > >

Re: fedora-upgrade fails with error: unrecognized arguments: --distro-sync

On 11/16/17 22:04, Christopher Ross wrote: > > > On 16/11/17 12:59, Christopher Ross wrote: >> Today I tried upgrading my x86 laptop from Fedora 26 to 27 but it failed >> with the >> following... > > > For info, trying again consistently yields the same results. > Well, the description of the

Re: HP Intel i5-8250U laptop - No audio

On 16/11/17 13:38, Richard Shaw wrote: I just installed F27 (dual booting with Win 10 that came with it) on my wife's new laptop and everything seemed fine until she told me the sound wasn't working. Richard: Is it possible that you have HDMI audio being selected as default? I'm seeing

Re: fedora-upgrade fails with error: unrecognized arguments: --distro-sync

On 16/11/17 12:59, Christopher Ross wrote: Today I tried upgrading my x86 laptop from Fedora 26 to 27 but it failed with the following... For info, trying again consistently yields the same results. root@nellie 13:43:45 ~ # fedora-upgrade Going to upgrade your Fedora to version 27. You

HP Intel i5-8250U laptop - No audio

I just installed F27 (dual booting with Win 10 that came with it) on my wife's new laptop and everything seemed fine until she told me the sound wasn't working. I checked the usual stuff, that it was configured properly in gnome-control-center and it showed that the speakers were selected and

Re: Fonts in F27

On 16 November 2017 at 06:50, Gordon Messmer wrote: > On 11/15/2017 10:52 AM, Ahmad Samir wrote: >> >> Most likely it's the new default v40 truetype interpreter; > > > Maybe, but the users list email you linked to indicated that the new > interpreter was introduced in

system upgrade failure: "Failed to synchronize cache for repo 'my', disabling."

An attempt to upgrade failed, logging the following entries: dnf[910]: Failed to synchronize cache for repo 'my', disabling. Followed by a bunch of: "Unable to match package " and "Error: Unable to match some of packages" The "my" repo contains locally-built packages. The repo is on the

Re: I miss the tray icons

On 11/16/2017 07:59 PM, Ege Güneş wrote: > You can use TopIcons Plus [1] extension. > > [1] https://extensions.gnome.org/extension/1031/topicons/ > > Ege Güneş > +90 532 740 0848 > https://gunes.io > For anything sensitive: https://gunes.io/publickey.txt > Well I'm not fan

fedora-upgrade fails with

Today I tried upgrading my x86 laptop from Fedora 26 to 27 but it failed with the following... root@nellie 12:33:40 ~ # fedora-upgrade Going to upgrade your Fedora to version 27. You may want to read Release Notes:   http://docs.fedoraproject.org/release-notes/ Hit Enter to continue or

Re: I miss the tray icons

You can use TopIcons Plus [1] extension. [1] https://extensions.gnome.org/extension/1031/topicons/ Ege Güneş +90 532 740 0848 https://gunes.io For anything sensitive: https://gunes.io/publickey.txt On Thu, Nov 16, 2017 at 8:13 AM, Frederic Muller wrote: >

Reusing downloaded packages for multiple system-upgrades

With prior releases, I saved a bunch of bandwidth with system-upgrading multiple machines by stashing away a copy of the downloaded /var/lib/dnf/system-upgrade, and then copying it to the remaining boxes upfront. That directory was just a flat directory, containing the downloaded rpms, and

Re: fc27: nis/ypbind?

On 16.11.2017 12:50, Ralf Corsepius wrote: > On 11/16/2017 12:04 PM, Ulf Volmer wrote: >> i haven't seen an active NIS installation in real life in the last >> years. You should think about switching to LDAP with or without >> kerberos. > It's my home/office network ;) Your decision. > Besides

Re: fc27: nis/ypbind?

On 11/16/2017 12:04 PM, Ulf Volmer wrote: On 16.11.2017 11:32, Ralf Corsepius wrote: On 11/15/2017 06:13 PM, Ralf Corsepius wrote: I have been using yp/nis for ages, but with fc27 things stopped working? Has anybody managed to get ypbind/nis working with fc27? If so, how? To me, yp/nis

F27 upgrade problem (grub)

Hello, I've a problem to upgrade my fully updated Fedora 26 to Fedora 27. dnf system-upgrade download --refresh --releasever=27 gives Error: Problem: package grub2-efi-1:2.02-0.40.fc26.i686 requires grub2-tools = 1:2.02-0.40.fc26, but none of the providers can be installed -

Re: fc27: nis/ypbind?

On 16.11.2017 11:32, Ralf Corsepius wrote: > On 11/15/2017 06:13 PM, Ralf Corsepius wrote: >> I have been using yp/nis for ages, but with fc27 things stopped working? >> >> Has anybody managed to get ypbind/nis working with fc27? If so, how? >> >> >> To me, yp/nis seems to be in an untested shape

Re: fc27: nis/ypbind?

On 11/15/2017 06:13 PM, Ralf Corsepius wrote: Hi, I have been using yp/nis for ages, but with fc27 things stopped working? Has anybody managed to get ypbind/nis working with fc27? If so, how? To me, yp/nis seems to be in an untested shape and unusable in fc27. Some more insights: The

Re: Smooth upgarde to F27

On Tue, 14 Nov 2017 08:23:39 -0600 Ranjan Maitra wrote: > I started upgrading my personal computers last night: on all systems > so far it has been effortless (4 down, 3 to go). > > Great job, Fedora developers! +1 I've starrted with Fedora at the time of f25 beta (altjough

Re: dnf via squid caching proxy - does it work for you?

Allegedly, on or about 15 November 2017, lejeczek sent: > hi there people, > > I wonder do you squid proxy and dnf via it? > I cannot get it to work, even with baseurl insteadof > metalinks, it's sosloww! and 99% of the time fails to get to > repositories. Hello person, You haven't said what

Re: dnf via squid caching proxy - does it work for you?

On 16/11/17 00:45, Sam Varshavchik wrote: lejeczek writes: hi there people, I wonder do you squid proxy and dnf via it? I cannot get it to work, even with baseurl insteadof metalinks, it's sosloww! and 99% of the time fails to get to repositories. If your goal is simply to avoid having