On Tue, Jan 12, 2010 at 11:22 AM, Ashley M. Kirchner ash...@pcraft.com wrote:
We're going to split out main server up into 3, possibly more with
backup redundancy. The basic setup will be 1 server (USER) holding
everyone's physical account, 1 server (MAIL) which holds everyone's mail
On Sat, Nov 19, 2011 at 7:19 PM, Morgan Read mst...@read.org.nz wrote:
Hello Folks
I'm running f14 (still)
I've successfully configured my machine (hp ml150 g3) to redirect bios,
grub menu and login prompt - but, between the grub menu and the login
prompt I'm missing the boot messages. If
On Wed, Jan 11, 2012 at 2:33 PM, linux guy linuxguy...@gmail.com wrote:
Firefox is intermittently freezing from time to time in my KDE
sessions, hanging my whole machine for 20 seconds to a minute every 20
minutes or so.
Anyone else having this problem ?
$ yum list firefox
firefox.i686
1. try inserting the card after the reader is plugged in.
2. does the reader support sdhc cards (2gb) and if no and the card is
greater than 2gb it won't work.
On Fri, Dec 6, 2013 at 10:25 AM, Kevin Wilson wkev...@gmail.com wrote:
Hello,
I have fedore 18.
When I insert an SD reader with an sdc
If you have not installed it, install denyhosts...it watches for ssh
password attacks and locks out hosts automatically.
It does limit the number of attempts someone gets before being
completely locked out.
On Thu, Dec 19, 2013 at 11:22 AM, Mark Haney mha...@practichem.com wrote:
-BEGIN
you will need to run pvscan and determine what the name of the vg is
you want to add the storage to.
to get /dev/sdb5 - /dev/sdb4 you reworked the partition table (ie
removed the extend partition and made sdb4 a primary?).
if still lost give this info:
fdisk -l /dev/sd[ab]
pvscan
df
On Sat,
you will need a vgextend first something like vgextend fedora_box1000
/dev/sdb4 that will add the disk to the vg.
the df shows these 2 are mounted:
/dev/mapper/fedora_box1000-roo
t 34G 4.5G 27G 15% /
/dev/mapper/fedora_box1000-home 17G 7.2G 8.1G 47% /home
so either
it just wnats /dev/fedora_box1000/root or /dev/fedora_box1000/home the
lv_ is not in the name of the lv.
On Sat, Dec 21, 2013 at 4:13 PM, Bob Goodwin - Zuni, Virginia, USA
bobgood...@wildblue.net wrote:
On 12/21/2013 04:26 PM, Chris Murphy wrote:
On Dec 21, 2013, at 2:11 PM, Roger Heflin
add selinux=0 on all of the kernel lines in grub.conf...I believe this
disables it completely...and cannot be turned back on without removing
that line and rebooting...obviously if you want to enable it and got
back and use it again relabeling would need to be done.
On Sun, Dec 22, 2013 at 8:55
use nfs...but make sure you *read* from a nfs mount of the data and
write to local disk.
Note that to make a network filesystem safe during writing that it is
going to usually be slower, and because of that reading is
significantly faster than writing.
And in general if you are using small files
If you run firefox with one already running it tries to contacts the
current running firefox version and may try to open a tab on the
already running window, that may be the no error piece.
if you want to run 2 separated copies you need to setup another
profile and start it like this: firefox
I actually wanted 2 separate users that were somewhat isolated from
each other so the separate profiles was useful.
On Sun, Mar 23, 2014 at 5:10 PM, g gel...@bellsouth.net wrote:
On 03/24/14 03:54, Roger Heflin wrote:
if you want to run 2 separated copies you need to setup another
profile
Assuming you are using ifcfg-* files, there is an option called
ETHTOOL_OPTS that allows you to set various ethtool settings when the
network gets brought up.
if you need multiple settings you can do it like this -s ${DEVICE}
advertise 00c ; secondethtool option
On Sat, Aug 17, 2013 at 9:05 AM,
I have recently created a new 6tb XFS filesystem.
After this gnucash, pan and a number of other utilities (on one of the
32-bit machines) start failing to work and complaining about value too
large for defined data type.
I have found someone else that indicated this ment that the tools
needed to
against each wrong
package, or give up and just reinstall the machine 64-bit...
On Sat, Aug 31, 2013 at 1:43 AM, Michael Schwendt mschwe...@gmail.com wrote:
On Fri, 30 Aug 2013 21:21:19 -0500, Roger Heflin wrote:
I have recently created a new 6tb XFS filesystem.
After this gnucash, pan
On Mon, Jan 7, 2013 at 2:19 PM, Jim binary...@comcast.net wrote:
On 01/07/2013 02:23 PM, Frank Murphy wrote:
On Mon, 07 Jan 2013 13:20:00 -0500
Jim binary...@comcast.net wrote:
f17
Trying to start kdump and I get this error message;
Jan 7 13:16:31 localhost kdump: No crashkernel
On Mon, Jan 7, 2013 at 4:01 PM, Jim binary...@comcast.net wrote:
On 01/07/2013 04:43 PM, Roger Heflin wrote:
On Mon, Jan 7, 2013 at 2:19 PM, Jim binary...@comcast.net wrote:
On 01/07/2013 02:23 PM, Frank Murphy wrote:
On Mon, 07 Jan 2013 13:20:00 -0500
Jim binary...@comcast.net wrote
does cat /proc/cmdline show it? That appears to be what it is
complaining about, it is not on the current running kernel.
$ cat /proc/cmdline
BOOT_IMAGE=/boot/vmlinuz-3.5.2-1.fc17.i686
root=UUID=cf5a1042-bb2b-4c6b-a0e0-1da27273d413 ro rd.md=0 rd.lvm=0 rd.dm=0
SYSFONT=True KEYTABLE=us
On Mon, Jan 7, 2013 at 7:19 PM, Jim binary...@comcast.net wrote:
On 01/07/2013 07:55 PM, Roger Heflin wrote:
correct grub line for
that kernel?
what correct grub line for that kernel ? it is in /boot/grub2/grub.conf
The line that booted the current kernel did not have a crashkernel
On Mon, Jan 7, 2013 at 8:09 PM, Jim binary...@comcast.net wrote:
On 01/07/2013 08:26 PM, Roger Heflin wrote:
On Mon, Jan 7, 2013 at 7:19 PM, Jim binary...@comcast.net wrote:
On 01/07/2013 07:55 PM, Roger Heflin wrote:
correct grub line for
that kernel?
what correct grub line
I was watching this thread, I think this may work for you (it is
working for me as of today).
This is what is in my file, I have my wireless device setup in a bond
with the wired device, so I can unplug and wireless takes over and
then plug in and it goes back to wired. I have network manager
You probably need to be clear about exactly what you mean by added what was
/boot to /home...
What did the partition table look like before and after you did the work?
was /boot before /home and you enlarged /home to be /home+/boot (the
partition before /home?)?
On Mon, Apr 1, 2013 at 6:39 PM,
On Sat, Aug 18, 2012 at 6:51 PM, John Wendel jwende...@comcast.net wrote:
I'm formatting a filesystem on a new 2TB disk. It will be used to store
video, so it will just contain a relatively few large files (200KB to 10GB).
So, worst case, i need 1 inodes.
First I used the option -i
On Thu, Nov 8, 2012 at 11:54 AM, Jerome Yanga jerome.ya...@gmail.com wrote:
The anonuid/anongid are valid UID/GID.
The nohide option didn't work.
Here is the logs from /var/log/messages of the Fedora machine while
the AIX machine performed a ls.
Nov 8 09:44:31 fedora1 kernel:
On Sat, Jun 28, 2014 at 10:41 AM, Heinz Diehl h...@fritha.org wrote:
On 27.06.2014, Roman Kravets wrote:
Jun 27 11:14:38 softded kernel: vmap allocation for size 1048576 failed: use
vmalloc=size to increase size.
What is it meen use vmalloc=size to increase size? When can I change it
It will almost certainly be fine, at worst it may be a bit slower
under the right benchmark, but unlikely to be anything that matters
unless you need it as fast as it possibly can be.
The underlying platter data rate is almost certainly less than 3Gbps.
Check the manufacturer's web site I would
I had to go find the CD I had with dicom files on it.
I was not able to get anything selecting the diacomdir file...I had to
go into dicom dir and go down to where there were real files (select
show all files) and then was able to display the image by selecting
each image that was in several
I have fedora 20 running on my 700 with 512mb of ram.
I had to use the yum update instructions to update it since you cannot
install with that low of ram, but you can update into it that way.
On Fri, Aug 29, 2014 at 6:20 PM, Joe Zeff j...@zeff.us wrote:
On 08/29/2014 04:07 PM, Robert
There are rootkits on linux.
I have removed several, generally people break in via bad password on
an account, the ones I have dealt with did not get into root. They
appeared to at least be contained in a user account. If you are
know what is normal in ps you can see the extra processes and
Power supply would be my only guess to cause system wide failures with
2 separate motherboards, both of which would be unlikely to be bad in
the same way. I have used a number of the AMD build sata2/sata3 MB
controllers and never had them act up even when using all of the
build-ins at the same
for fedora16 this appears to work:
rpmbuild --rebuild bash-4.2.48-2.fc19.src.rpm
rpm --nodeps -U /root/rpmbuild/RPMS/x86_64/bash-4.2.48-2.fc16.x86_64.rpm
ln /usr/bin/bash /bin/bash
ln /usr/bin/sh /bin/sh
On Fri, Sep 26, 2014 at 1:52 PM, Michael Cronenworth m...@cchtml.com wrote:
On 09/26/2014
This page:
http://www.thewireframecommunity.com/node/14
note step 3.4: -H newc is important.
find . | cpio -o -H newc | gzip gt; ../initrd.img
On Sat, Oct 11, 2014 at 3:29 PM, CLOSE Dave
dave.cl...@us.thalesgroup.com wrote:
Heinz Diehl wrote:
You could use dracut to recreate your initramfs?
or not.
if the root device is elsewhere it is not finding that.
On Sat, Oct 11, 2014 at 3:43 PM, CLOSE Dave
dave.cl...@us.thalesgroup.com wrote:
Roger Heflin wrote:
note step 3.4: -H newc is important.
find . | cpio -o -H newc | gzip gt; ../initrd.img
Yes, it is. But -c means exactly the same thing.
--
Dave
the sleeps to the linuxrc and/or init script so can see the output --
depending on which this initrd uses).
On Sat, Oct 11, 2014 at 4:48 PM, CLOSE Dave
dave.cl...@us.thalesgroup.com wrote:
Roger Heflin wrote:
it is failing to find the root device.
If the root device is initrd then that should
. (dot) usually in these cases are whatever preferred named
sub-directory that you extracted it in to start with.
On Sun, Oct 12, 2014 at 2:48 PM, jd1008 jd1...@gmail.com wrote:
On 10/12/2014 01:39 PM, CLOSE Dave wrote:
find . | cpio -oc | xz --check=crc32 --lzma2=dict=1MiB ../initrd2.img
Depending on who makes the drive, the manufacturer's diag tool will
generally have something that will secure erase all of the drive
assuming the drive is still working enough.
I know last time I used the seagate diag tool it on the menu.
On Sun, Nov 16, 2014 at 1:17 PM, jd1008 jd1...@gmail.com
vgrename can rename using a uuid to know who to rename, so rename it
to something that does not conflict.
On Thu, Dec 18, 2014 at 8:27 AM, Markus Lindholm
markus.lindh...@gmail.com wrote:
This is what I see in the log when I attach the disk
kernel: sd 7:0:0:0: [sdb] Attached SCSI disk
On Thu, Dec 25, 2014 at 4:58 PM, Geoffrey Leach ge...@hughes.net wrote:
A rogue printer daemon appears to have filled up /tmp with 16,000.000
symlinks. Question: how to delete them? (Sometime before the end of 2015)
--
The fastest way (if it is not tmpfs) may be to create a new /tmp
On both a dd-wrt and a recent asus router I have successfully got the
older bonding module to bring up wireless and wired in a
active/passive mode (wired is active if there). Both interfaces
would have the same IP and mac address and I can unplug the wired and
immediately have it switch over
or something similar to find the specific stuff in that sector.
On Sat, Mar 14, 2015 at 5:09 PM, Tom Horsley horsley1...@gmail.com wrote:
On Sat, 14 Mar 2015 16:53:15 -0500
Roger Heflin wrote:
Also usually the errors are found by linux doing a read against it, so
there should be error messages
I have never found a way to get smart to report what specific sectors
is pending.
You can do a smartctl -l long against the device and generally it will
stop when it hits that sector.
Also usually the errors are found by linux doing a read against it, so
there should be error messages on the
I have seen my seagate 3tb drive not clear PENDING, not sure of the
exact set of conditions for it to not clear. After doing something
(booting, running a long test or something) it finally cleared the
pending.
On Sun, Mar 15, 2015 at 7:24 PM, Ian Pilcher arequip...@gmail.com wrote:
On
Recreating a rare crash even when you know the exact conditions that
caused the crash is very very difficult.I have been involved in
not so rare crashes (we had some machines of the exact same hw type
that all crashed randomly about 1x per week). And duplicating that
crash tied up a test
16, 2015 at 12:56 PM, jd1008 jd1...@gmail.com wrote:
On 03/16/2015 11:29 AM, Roger Heflin wrote:
Recreating a rare crash even when you know the exact conditions that
caused the crash is very very difficult.I have been involved in
not so rare crashes (we had some machines of the exact same
smartctl --all /dev/sdX and see how many are reallocated.
From my experience how many spare sectors there are depends on the
size and brand.
On Thu, Mar 12, 2015 at 2:29 PM, Joe Zeff j...@zeff.us wrote:
On 03/12/2015 12:20 PM, jd1008 wrote:
So, I am puzzled as to how quickly were the spare
/12/2015 04:03 PM, jd1008 wrote:
--
On 03/12/2015 01:37 PM, Roger Heflin wrote:
smartctl --all /dev/sd
ID# ATTRIBUTE_NAME FLAGVALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail
Always - 0
196
you now need nofail as an option so the automatic systemd crap will
not stop on a missing fs.
And I have also noticed that once systemd parses the fstab file
changing it won't work, you have to reboot it to get it to figure out
you removed it.
There is probably a way to cancel what systemd is
ls -l /dev/sdc*
Depending on how the application is opening it having a partition on
it seems to block certain apps from opening the underlying device. It
likely depends on how the application is opening it. dd always works
in my experience, but other tools appear to be unhappy when they
detect
Yes.I have noted systemd stops the network then tries to umount nfs
on fedora 20. Not really a good plan.
And I also did the rc.local mount as it was not mounting on boot because
it tries to mount nfs before the network is live and fails.
There do seem to be some significant issues
You are assuming that the maintainers are employed/paid to maintain
that project. In quite a number of cases they are not paid for it, so
given that you may or may not get it fixed. And if I was a volunteer
for a project and my supervisor started harassing me, then you would
need a new
The current naming scheme works for the case of motherboard
replacements were the names and pci buses stay the same but the mac
addresses change.
I was previously using a static udev rule using bus-ids to force the
eth* devices to be consistent across motherboard replacements and
chassis swaps.
On Wed, Jul 19, 2017 at 3:48 PM, Robert P. J. Day wrote:
>
> on a regularly-updated F25 system, firefox recently become just
> excruciatingly slow, and i don't recall tweaking any settings. has
> something happened lately? anyone else noticing this?
>
> rday
>
Yes, for a
If the machine mounting the file and doing the tail has read from the
file and there is new data added in that last block and because of the
rate the data is coming into the file the timestamp on the file does
not change then the client nfs host will not know that the last block
has changed and
Bob,
When I was under a FAP, I used to do a trick. I would mount
/var/cache/dnf via nfs from my main machine on the others I was
updating and then change /etc/yum.conf (keepcache to 1) and that way
generally the first node would fill the cache, and then the 2nd node
would reuse the data
I like an ancient program called xloadimage. It has a delay this
might come close "xloadimage -global -delay " to
doing what you are asking for.
You might need to put a bash wrapper to restart it once all of the
images have been displayed once.
On Mon, Nov 27, 2017 at 2:04 AM, jeandet
On Tue, Dec 12, 2017 at 10:32 AM, Alex wrote:
> Hi,
>
> On Mon, Dec 11, 2017 at 1:28 PM, Rick Stevens wrote:
>> On 12/10/2017 12:35 PM, Alex wrote:
>>> Hi, I have a fedora27 system and having a problem with hdhomerun and
>>> video dropout with
I don't believe there really is an easier way.
You can download a kernel.org kernel or the fedora kernel source and
built it to be 64-bit and boot that on a 32-bit userspace and that
will get you around some kernel memory/resource limits, I did that
previously on one of my machines for 6-12
Reinstalling any rpms you have a reason to suspect have issues should
be just fine. I have personally reinstalled the kernel rpm a number
of times when the update aborted before completion.
On Mon, May 7, 2018 at 3:54 AM, Danny Horne via users
wrote:
> Hi all,
>
Generally when I am messing with usb drives I have used these 2 commands:
grep Dirty /proc/meminfo (dirty is the amount of write buffers that
need to be flushed for all disks, most will usually be the disk that
was just copied to)
the second is "vmstat 1" and watch the bi/bo columns as they show
I don't sync like Bob does, I just watch the io to estimate the copy
time of whatever amount I am copying.
On Mon, May 7, 2018 at 8:34 PM, Cameron Simpson <c...@cskk.id.au> wrote:
> On 07May2018 20:23, Roger Heflin <rogerhef...@gmail.com> wrote:
>>
>> the second is &qu
wrote:
> On 07/05/18 15:37, Roger Heflin wrote:
>> Reinstalling any rpms you have a reason to suspect have issues should
>> be just fine. I have personally reinstalled the kernel rpm a number
>> of times when the update aborted before completion.
>>
>>
> Tried 'dnf
You may want to install sysstat (sar) and look at the rates by doing
sar -n EDEV and sar -n DEV to compare the drops vs packets.In my
experience on critical production systems if the rate is less than 1
(drop/error/...) per 10,000 packets then in general you won't see a
performance impact.
you might try a find /sys -name "rc1*" and see if some piece of hw has
that name. It may be some driver trying to manage the ir remote
hardware.
When I do it on my machine I get this:
find /sys -name "rc1*" -ls
33248 0 drwxr-xr-x 5 root root0 May 8
15:50
install modulename /bin/true
blacklist won't prevent a dependency from loading a module, I have
sometimes just did a mv on the ko file and depmod to rebuilt the
module index, but that has to be redone each new kernel.
___
users mailing list --
I have had issues like that that tracked back to the usb card not
having enough power and needing the extra power adapter connected, so
you may want to try that. Especially if anything on the card may be
using a lot of power (I have had web cams and hard disks both cause
it).
On Thu, May 31,
If you want to debug it the easy way do this:
create /usr/local/bin/slowcpus and make it executable and put the
commands in it and test it from the cmd line:
Then in rc.local do this:
/usr/local/bin/slowcpus > /tmp/slowcpu.out 2>&1
On Sun, Jun 24, 2018 at 7:26 PM, Ed Greshko wrote:
> On
If auto neg is set on one end, and not on the other end, then the
standards says set things to 100mb/half (for gbit cards) since you
were unable to get information from the other end I believe this was
judged the most likely to work reasonably by the people who write the
standard. On 100mbit
Stay away from the <$50 for 2-4 ports, most of them are pretty bad.
One of the cheaper old LSI ones. I have one that was bought used and
flashed into a pure sata controller.
Mine is a: SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] and/or The
LSI 9211-8i 6Gb/s SATA +SAS HBA,
It is around $80
For JBOD disks the LSI or the build-in Intel or AMD ports seem to be
equally as fast since they are all connected to the CPU with enough
PCI-e lanes, and for most usage cases it is plenty fast enough.
I have had bad luck with at least 2 different marvell chipsets, so
won't touch those. One of
The vgarchive file 0 is the first archive file ever from that vg,
so it would most likely be an empty new vg at that time.
Are you sure 0 is the file you want?
Suggest doing this:
grep -i before /etc/lvm/archive/vg_debussy*
and see what the newest file is before you did the remove
startx has worked for me on Fedora 27, and it did start the same
desktop as what graphical -> login as same user started.
On Sun, Jul 8, 2018 at 4:18 AM, Patrick O'Callaghan
wrote:
> On Sat, 2018-07-07 at 18:12 -0700, solarflow99 wrote:
>> On Sat, Jul 7, 2018 at 2:27 AM, Patrick O'Callaghan
>>
You can also use lsinitrd to show the current files in any initramfs
and/or cat out the contents of single files you see in the initramfs.
On Sat, Apr 14, 2018 at 10:43 AM, wrote:
>
> On Sat, 14 Apr 2018 15:07:28 - Grant Edwards wrote:
>> On 2018-04-14,
The only way I know to produce these results would be to override the
build_root location someplace.
echo ${RPM_BUILD_ROOT}
There are probably other ways to override it.
On Tue, Mar 20, 2018 at 3:24 PM, CLOSE Dave
<dave.cl...@us.thalesgroup.com> wrote:
> Roger Heflin wrote:
>
&g
I would run this and see where rpm thinks they should be since they
are not in /boot
rpm -qa --filesbypkg | grep -i vmlinuz
On Tue, Mar 20, 2018 at 2:05 PM, CLOSE Dave
wrote:
> The following procedure did NOT fix my problem. Using RPM instead of DNF
> still did
find /foo -name "*dog.dat" -ls -exec tail -f {} \;
-print will list only the filename
-ls will list the long dir entry.
{} is needed to deliver the filename you are working with.
\; is needed to signal the end of the command.
On Sat, Mar 3, 2018 at 12:45 PM, Clifford Snow
this is the daily logrotate process. it rotates the log files and
reloads httpd. It is normal. A number of other process will also
restart at the same time.
See:
cat /etc/logrotate.d/httpd
/var/log/httpd/*log {
missingok
notifempty
sharedscripts
delaycompress
postrotate
>
> Many thanks,
> Ranjan
>
> On Sat, 22 Sep 2018 14:09:02 -0500 Roger Heflin wrote:
>
> > If you have the original disk and can mount the filesystem then do this:
> >
> > create a script like this and call it say /dir/testcatfile:
> > cat $1 > /dev/
A logitech 920 is $50 on amazon. Not sure I would mess with another
brand for a few dollars savings.
The 920's I have used worked well with fedora and were really clear.
On Sat, Sep 22, 2018 at 4:31 PM Howard Howell wrote:
>
> Hi, guys,
> Looking for an inexpensive webcam. Found this
If you have the original disk and can mount the filesystem then do this:
create a script like this and call it say /dir/testcatfile:
cat $1 > /dev/null
RC=$?
if [ ${RC} != 0 ] ; then
echo "$1 is corrupt"
fi
chmod +x /dir/testcatfile
Then do this:
find /tmp -type f -exec /dir/testcatfile {}
The trackballs like the Logitech M570 are pretty easy to press and
drag. Some of the ones with the ball in the middle are a lot harder
to drag with.
I use an ancient wired usb trackman marble with a scroll wheel and a
retainer that prevents the ball from running away that is around 20
years old
A guess is that the /boot that is booting the machine is not the same
/boot is the current booted OS has mounted at /boot.
So all updates are being put on a /boot that is not being used to boot
the machine, and you need to find the actual /boot that is booting the
machine and then do a dnf
if you have sar installed (package is sysstat) then sar -n DEV will
give you 10 minute network counters, it will give you 1 minute data if
you turn sar's sample timer down to 1 minute.
snmp if you router supports it, and I have also ssh'ed into my router
ever X minutes and collected its network
echo 1 > /sys/block/sdX/device/delete
And the device should disappear.
On Thu, Jan 3, 2019 at 11:01 AM Chris Adams wrote:
>
> Once upon a time, Ian Malone said:
> > Does anyone have suggestions for easily simulating a missing volume in
> > LVM on bare metal?
>
> Actually make a volume go
Did you rerun the resize2fs after the reboot/lvmresize/fsck?
On Tue, Sep 18, 2018 at 10:03 AM Patrick Dupre wrote:
>
> I am not sure about the +100.
>
> However, I rebooted without mounting /home
> and I used lvm manager to do the resize.
>
> It seems OK, except that
> 1) it shows "none" for the
-l does not umount a filesystem if files are open on it. Not sure -l
should ever be used, one needs to determine what is using the
filesystem and a normal umount needs to be done.
So even though it does not show in df and /proc/mounts the filesystem
is still mounted which is why resize2fs says
You probably just need to determine where the temp data is going and
put a tmpfs mount in that location so it uses ram for the temporary
files you don't need to keep.
Any static files that are only being read from the usb device on boot
up will quickly get cached into ram assuming you have enough
To have a stuck kernel version, then what you have mounted at /boot is
not what is booting your machine.
You need to find the real /boot where ever it is hiding and mount it
at /boot (and update /etc/fstab) and then do a "dnf reinstall" on each
of the kernels you want to work, and then reboot
dnf install `cat file`
On Thu, Feb 21, 2019 at 9:02 AM stan via users
wrote:
>
> On Thu, 21 Feb 2019 15:36:08 +0100
> "Patrick Dupre" wrote:
>
> > How can I make a dnf install "list of pkgs in a file"?
> >
> > I tried dnf install `file`
> >
> > but it does not work.
>
> I usually use a python
If anything runs any lvm commands it will basically run a pvscan
internally and then that will also spin it up (I believe if not using
lvmetad as with lvmedad it only does a single device at a time).
On Tue, Mar 19, 2019 at 5:47 AM Ed Greshko wrote:
>
> On 3/19/19 6:35 PM, Patrick O'Callaghan
upgrade.
> What I didn't know is that a new version has to be downloaded every time.
> This is really a pain in the neck.
>
> What's your add-on wifi card?
>
> Ciao
>
>
> On Fri, 12 Apr 2019 20:08:01 -0500
> Roger Heflin wrote:
>
> > You are also goin
You are also going to have to be prepared when a kernel change happens
and causes it to no longer compile to download an updated version that
has the correct code for the new kernel.
I have a RTL8814au and it also is not in the kernel and every so often
you will need to go back to the last kernel
Did you check the kernel command line in grub.cfg to see what root= is
set to? That is the only place I know specifically references what
to look for on the switch root.
On Tue, Jun 4, 2019 at 10:41 AM stan wrote:
>
> Hi,
> I'm trying to clone an existing Fedora install, just a / partition and
wrote:
>
> On Tue, 4 Jun 2019 12:37:04 -0500
> Roger Heflin wrote:
>
> > Did you check the kernel command line in grub.cfg to see what root= is
> > set to? That is the only place I know specifically references what
> > to look for on the switch root.
>
> Yep,
away when you did hostonly=no.
On Wed, Jun 5, 2019 at 12:35 AM stan wrote:
>
> On Tue, 4 Jun 2019 18:49:29 -0500
> Roger Heflin wrote:
>
> > I would check these modules in dracut: dracut --list-modules, some of
> > them are rescue and debug and a few other modules may hel
019 07:31:46 -0500
> Roger Heflin wrote:
>
> > Based on not finding bash, I would think that t may not be finding
> > your rootlv.
> >
> > That generally means either the driver for the disk controller/scsi,
> > or a critical filesystem component, or something
the right libraries with the right checksums that
the ldd says it needed. It sounds like once you get the chroot . to
work things may work right. Something odd happened with the rsync I
would suspect.
On Wed, Jun 5, 2019 at 4:33 PM stan wrote:
>
> On Wed, 5 Jun 2019 10:14:01 -
You are welcome.
On Thu, Jun 6, 2019 at 10:42 AM stan wrote:
>
> On Wed, 5 Jun 2019 18:16:44 -0500
> Roger Heflin wrote:
>
> > It sounds like once you get the chroot . to
> > work things may work right. Something odd happened with the rsync I
> > would suspe
My 5500 appears to still be getting signal locks on the channels it
should on kernel 5.x and F29.
I tested with dtvscan and dtvsignal that came with the card and seems
to work for all dvb cards and was authored by by Jack Kelliher .
On Tue, May 14, 2019 at 12:08 PM D wrote:
>
> I have been
I am using the default driver built into the kernel and it works.
I compiled those files a really long time ago, and they still work o
f29 for me, but it sounds like they may not recompile with current
headers with no changes.
On Tue, May 14, 2019 at 11:34 PM D wrote:
>
> Thanks for your reply.
xinput seems to be interfacing with libinput and is reporting there
are devices and the devices have properties.
It it is not clear though which properties work and don't work in it
On Fri, Apr 19, 2019 at 7:58 PM Ed Greshko wrote:
>
> On 4/20/19 8:50 AM, Roger Heflin wrote:
> >
1 - 100 of 660 matches
Mail list logo