Have a look at the location table, column cflag.
Are your users registered behind nat having the cflag 64.
If not, they are not registered correctly, just use setbflag(6) when
they are natted.
modparam("usrloc", "nat_bflag", 6) at the beginning
and on the main route
replace
if
I've just setup a similar configuration as yours.
Could you check the SDP payload of the SIP INVITE that goes from kamailio to
the callee ? It should contains the IP address of rtpproxy and the port
allocated by the proxy.
Regards,
Pascal
On Thu, Jun 25, 2009 at 12:41 PM, rubenrojas - Trc.es
Have a look at the location table, column cflag.
Are your users registered behind nat having the cflag 64.
If not, they are not registered correctly, just use setbflag(6) when
they are natted.
modparam("usrloc", "nat_bflag", 6) at the beginning
and on the main route
replace
if
Have a look at the location table, column cflag.
Are your users registered behind nat having the cflag 64.
If not, they are not registered correctly, just use setbflag(6) when
they are natted.
modparam("usrloc", "nat_bflag", 6) at the beginning
and on the main route
replace
if
Hello everyone, this is my first post on this list,
I have installed kamailio 1.5.1 and set up a vanilla default kamailio.cfg, then
I have modified the cfg to activate mysql, domain, presence, nathelper and
authentication with md5, everything works as supposed to, and the clients can
register,