Hi,
On Sat, May 18, 2013 at 12:05 PM, Valentin Bud valentin@gmail.comwrote:
Hello Carlos,
I would gladly open a request if you and others from the community think
this is useful.
I see this topic as a Request For Comments :-).
For me the NAME of the VM would prove useful to be
Hi,
Let's see if libvirt is working then. As oneadmin, in the front-end
(this will ask for the ESX credentials):
$ virsh -c das-vsilo23.cimex.com.cu --readonly nodeinfo
BTW, what version of ruby are you using?
Regards,
-Tino
--
Join us at OpenNebulaConf2013 in Berlin, 24-26 September, 2013 |
Good day.
I installed OpenNebula 4 on Centos 6.4 and tried to configure it with the
guides provided in official website. it seems everything was OK. but now I
have an error while I am trying to create a vm.
here is the log of vm:
Mon May 20 10:44:45 2013 [DiM][I]: New VM state is ACTIVE.
Mon
Hi,
Maybe you could try the ttylinux sample Vm to discard any problems in your
infrastructure.
http://marketplace.c12g.com/appliance/4fc76a938fb81d351703
Cheers
--
Join us at OpenNebulaConf2013 http://opennebulaconf.com in Berlin, 24-26
September, 2013
--
Carlos Martín, MSc
Project
Hi,
On 17 May 2013 13:01, Sururah Apinke apinkebe...@yahoo.com wrote:
Hello,
I did
bello@bello-OptiPlex-755:~$ /srv/cloud/one/bin/sunstone-server -H start
It gave the message below
Usage: sunstone-server {start|stop|restart}
then, i did
bello@bello-OptiPlex-755:~$
Hi,
With that configuration, you are enabling the ssh driver in oned.conf. But
you still need to set it for the datastores.
If you do a onedatastore list/show, you will see the 'shared' tm mad driver
is used. This can be changed to 'ssh' with the onedatastore update command.
Cheers
--
Join us
Hi,
It may be a problem with your shared storage. Please check that the
datastore paths are correctly exported to the hosts, and that oneadmin has
rights to us them.
Cheers
--
Join us at OpenNebulaConf2013 http://opennebulaconf.com in Berlin, 24-26
September, 2013
--
Carlos Martín, MSc
Project
Hi,
The sandbox VM is just a regular OpenNebula 4.0 installation, with
localhost setup as a qemu host. You can then add other VMware hosts.
Regards.
--
Join us at OpenNebulaConf2013 http://opennebulaconf.com in Berlin, 24-26
September, 2013
--
Carlos Martín, MSc
Project Engineer
OpenNebula -
Hi,
You are using the 'shared' tm drivers for the datastore 1. Can you please
check that the path is correctly exported to node2, and that oneadmin can
access it?
Cheers
--
Join us at OpenNebulaConf2013 http://opennebulaconf.com in Berlin, 24-26
September, 2013
--
Carlos Martín, MSc
Project
Hi Harald,
this is a tricky one.
There is no easy way to do this, but I can suggest two paths:
1 - The easy one (you don't care about Quotas)
Edit /var/lib/one/remotes/datastore/ceph/cp and add return $RBD_SOURCE in
L86 (
Hi,
On Thu, May 16, 2013 at 9:59 PM, Gandalf Corvotempesta
gandalf.corvotempe...@gmail.com wrote:
2013/5/16 Carlos Martín Sánchez cmar...@opennebula.org:
You shouldn't have a problem with this. Actually, you can even use one of
the sandbox VMs [1].
Will I be able to manage these hosts
Hi,
If you are use non-persistent Images, the changes are lost when the VM
instance is shut down. Set your images as persistent instead.
Cheers
--
Join us at OpenNebulaConf2013 http://opennebulaconf.com in Berlin, 24-26
September, 2013
--
Carlos Martín, MSc
Project Engineer
OpenNebula - The
Hi,
Give it a try with the disk in the sd bus, instead of ide.
Cheers.
--
Join us at OpenNebulaConf2013 http://opennebulaconf.com in Berlin, 24-26
September, 2013
--
Carlos Martín, MSc
Project Engineer
OpenNebula - The Open-source Solution for Data Center Virtualization
www.OpenNebula.org |
Hi Gandalf,
you can easily implement that network topology. It's in fact a very good
one. You can do it with either the Open vSwitch drivers or with the 802.1Q
ones, either ones.
You don't need an OpenFlow compatible switch, you just need it to be VLAN
enabled.
cheers,
Jaime
On Sat, May 18,
Hi David,
This was in fact a race condition bug. It was solved for OpenNebula 4.0:
http://dev.opennebula.org/issues/1722
Apologies for the late response
cheers,
Jaime
--
Join us at OpenNebulaConf2013 http://opennebulaconf.com/ in Berlin, 24-26
September, 2013
--
Jaime Melis
Project Engineer
Hi,
I'm not sure I understand the problem, but I have the feeling your use case
is not supported.
You can implement VLANs either with the 802.1Q [1] or the Open vSwitch [2]
drivers.
However, you can only tag one VLAN per interfaces, which as far as I know,
is the only thing that makes sense?
Thank you.
On May 17, 2013, at 9:28 , Carlos Martín Sánchez cmar...@opennebula.org wrote:
Hi,
As you said, attach and detach operations are only supported while the VM is
running.
I've opened a ticket with your request [1].
Meanwhile, you can set the Image as persistent, shutdown the
Hi Nicolas,
are you still experiencing this? Answering your question the proper way to
enable permissions is via sudo... so there might just be something a bit
wrong.
can you try the following:
oneadmin@onhost02:~$ sudo /sbin/vconfig add eth0 100
cheers,
Jaime
On Sat, Apr 20, 2013 at 2:32 PM,
I've changed the example so it is easier to see that is a context
variable. As Jon says is easier to fill this using sunstone but is
also pretty easy using the CLI:
$ onetemplate create --name some_name --cpu 1 --memory 512 --disk
ubuntu --ssh ~/.ssh/id_rsa.pub
You can also use --dry parameter
You have an overview on how to do this at
http://opennebula.org/documentation:archives:rel3.8:context_overview
On Fri, Apr 26, 2013 at 8:37 AM, anagha b banag...@gmail.com wrote:
Hi,
I am using opennebula-3.8.3 .
Is it necessary to contextualize vm with 3.8.3.
Followed video on youtube
FYI,
This is fixed with
https://github.com/OpenNebula/one/commit/b1c036c91afc79cbe60ea543c04c7917754911db
With that it works out-of-the-box in a raspberry pi.
Cheers
Ruben
On Thu, Jan 10, 2013 at 10:20 AM, Paul Mayer equilibriu...@gmail.comwrote:
Dear Carlos,
Thanks for your reply. I
Hi Karan,
Currently there are no plans to work on a python binding...However we'll be
more than happy to help anyone interested in updating the python bindings.
Cheers
Ruben
On Mon, May 20, 2013 at 1:36 AM, Karanbir Singh mail-li...@karan.orgwrote:
On 02/07/2013 09:38 PM, Zeeshan Ali Shah
22 matches
Mail list logo