Re: [one-users] Help with ESX UUIDs with OpenNebula

5 :) Thanks! Brad From: Tino Vazquez To: Brad Cc: "users@lists.opennebula.org" Sent: Friday, June 27, 2014 8:55 AM Subject: Re: [one-users] Help with ESX UUIDs with OpenNebula Hi Brad, If that change makes OpenNebula friendly with ESX 4.x we can add it to next releases

Re: [one-users] Help with ESX UUIDs with OpenNebula

gt; only change, but for now I'm just going to wait until the rest of our blades > get updated. > > Thanks! > Brad > > > From: Brad > To: Tino Vazquez > Cc: "users@lists.opennebula.org" > Sent: Thursday, June 26,

[one-users] Help us better meet your needs!: New User Survey

Dear OpenNebula users, We have created a new user survey that will take you only 5 minutes to complete. As an open-source community, it is very important for us to have information about your deployment. Doing so you will have influence over the project and software direction, and will help us imp

Re: [one-users] Help with ESX UUIDs with OpenNebula

updated. Thanks! Brad From: Brad To: Tino Vazquez Cc: "users@lists.opennebula.org" Sent: Thursday, June 26, 2014 8:10 AM Subject: Re: [one-users] Help with ESX UUIDs with OpenNebula Hi Tino, Thanks for responding. You can rename the datastores from the vSphere cli

Re: [one-users] Help with ESX UUIDs with OpenNebula

ant to do, but should get the expected output. Thanks! Brad   ________ From: Tino Vazquez To: Brad Cc: "users@lists.opennebula.org" Sent: Thursday, June 26, 2014 2:42 AM Subject: Re: [one-users] Help with ESX UUIDs with OpenNebula Hi Brad, >These

Re: [one-users] Help with ESX UUIDs with OpenNebula

Hi Brad, >These are failing because the ESX host is mounting NFS using the uuid that's >generated from the signature. I tried searching >the list, but I'm not sure how others are dealing with this. I notice the >documentation says that it needs to be mounted with >datastore ID only; e.g. /vmfs/v

[one-users] Help with ESX UUIDs with OpenNebula

Hi, I just started using OpenNebula and was following the quickstart guide when I hit a snag. When I run onedatastore show , I see under DATASTORE CAPACITY that TOTAL/FREE/USED are all 0M. I then executed /var/lib/one/remotes/datastore/vmfs/monitor with the arguments found in /var/log/one/oned

Re: [one-users] Help with OpenNebula Setup

Quoting Grant Tailor (therealwebg...@gmail.com): > I have been trying to setup OpenNebula > http://docs.opennebula.org/4.6/desig...entos_kvm.html for about 2 days now. > I went through hell setting it up to this point. I am hoping ports that > need to be opened will be mentioned on the documentatio

Re: [one-users] Help getting sunstone-server to auto-start after reboot like oned

un...@lists.opennebula.org [mailto: > users-boun...@lists.opennebula.org] *On Behalf Of *Kenneth > *Sent:* Saturday, December 14, 2013 7:33 PM > *To:* users@lists.opennebula.org > > *Subject:* Re: [one-users] Help getting sunstone-server to auto-start > after reboot like oned > >

Re: [one-users] Help getting sunstone-server to auto-start after reboot like oned

From: users-boun...@lists.opennebula.org [mailto:users-boun...@lists.opennebula.org] On Behalf Of Kenneth Sent: Saturday, December 14, 2013 7:33 PM To: users@lists.opennebula.org Subject: Re: [one-users] Help getting sunstone-server to auto-start after reboot like oned It's weekend, peopl

Re: [one-users] Help getting sunstone-server to auto-start after reboot like oned

It's weekend, people are out of their computers (maybe). Are you sure sunstone server is not being started when you reboot? It should be as launched at startup like the one service, you could have made some mistake during the installation? That being said, I'll make a bash script which conta

Re: [one-users] Help getting sunstone-server to auto-start after reboot like oned

This is my first post. Does anybody get my mails? Den 14/12/2013 00.23 skrev "Kenneth Øst" : > Hi One users > I have successfully setup OpenNebula 4.4 on Ubuntu 13.10 with Open vSwitch > on a single server for home use :-) > > My question as the subject says: I would like to have the sunstone-ser

[one-users] Help getting sunstone-server to auto-start after reboot like oned

Hi One users I have successfully setup OpenNebula 4.4 on Ubuntu 13.10 with Open vSwitch on a single server for home use :-) My question as the subject says: I would like to have the sunstone-server to automatically startup after reboot of the server. Are there a simple way to do start sunstone-ser

Re: [one-users] Help! with ebtables networking, for ONE 4.2 on openSUSE 12.3

Hi Mark, I have the feeling the NAT policies are interfering with this. Can you try without applying NAT rules? On Wed, Nov 13, 2013 at 9:08 PM, Mark Biggers wrote: > The subject says it all. I am available on IRC -- see my signature, and > Google chat. > > I can get no "networking across a b

[one-users] Help! with ebtables networking, for ONE 4.2 on openSUSE 12.3

The subject says it all. I am available on IRC -- see my signature, and Google chat. I can get no "networking across a bridge" working, for the ONE "ebtables" model. The platform is openSUSE 12.3 on a Thinkpad W530, plenty of memory & disk space.Here's the info. ** Thank you in advance.

Re: [one-users] help!

Hi, Try to check if opennebula has access rights on "/var/lib/one/", that there is a folder "/var/lib/one/remotes", and check if you can manually SSH to the host you are deploying a virtual machine to, and then make sure you run opennebula from the same user, or check that the user from whic

[one-users] help!

hi guys! i'm trying deploy a vm in a host but return the following erro log: Wed Aug 14 01:34:45 2013 [DiM][I]: New VM state is ACTIVE. Wed Aug 14 01:34:45 2013 [LCM][I]: New VM state is PROLOG. Wed Aug 14 01:34:45 2013 [VM][I]: Virtual Machine has no context Wed Aug 14 01:34:46 2013 [TM][I]: Com

Re: [one-users] Help please

Hi, Our documentation is here [1]. If it is too much, you may want to take a look at the sandbox VMs or the quickstart guides [2] The storage guides are here [3]. If you do a 'onedatastore list/show' you'll see that by default the 'shared' TM driver [4] is used. This driver requires you to export

Re: [one-users] Help please

Hi, What is your storage configuration? Are you exporting the datastore directories, are they mounted in the right path? The error says that the 'shared' TM (transfer manager) script couldn't find the image file in the host. Regards -- Join us at OpenNebulaConf2013 in

[one-users] Help please

Hello, I have well installed OpenNebula 3.8 in front and host machines but when I tried to create a VM, I have always an failed error message like this Mon Jun 24 19:34:22 2013 [DiM][I]: New VM state is ACTIVE. Mon Jun 24 19:34:22 2013 [LCM][I]: New VM state is PROLOG. Mon Jun 24 19:34:22 2013 [

Re: [one-users] Help connecting noVNC

Hi, On 15 May 2013 14:39, Mario Sickert wrote: > thx 4 reply. i'm using ubuntu destribution packages. i guess its all > about 3.4 > m. > Could you try using the last opennebula packages (4.0). There are lot of new features and bug fixes. http://downloads.opennebula.org/ Cheers > > Am 15.

Re: [one-users] Help connecting noVNC

thx 4 reply. i'm using ubuntu destribution packages. i guess its all about 3.4 m. Am 15.05.2013 10:46, schrieb Daniel Molina: Hi, On 13 May 2013 15:13, Mario Sickert > wrote: Hey Chummers ;-) after building VM i try to connect my new VM via VNC Access But

Re: [one-users] Help connecting noVNC

Hi, On 13 May 2013 15:13, Mario Sickert wrote: > Hey Chummers ;-) > > after building VM i try to connect my new VM via VNC Access Button. > Sunstone gives me a "submitted / VM startvnc: 11" but no VNC Window opens. > In Sunstone-server.log i can see a timeout. ssh connect to vm stops whit a > t

[one-users] Help connecting noVNC

Hey Chummers ;-) after building VM i try to connect my new VM via VNC Access Button. Sunstone gives me a "submitted / VM startvnc: 11" but no VNC Window opens. In Sunstone-server.log i can see a timeout. ssh connect to vm stops whit a timeout too. 127.0.0.1 - - [13/May/2013 14:04:15] "GET /vm

Re: [one-users] help, error creating VM (ssh port)

no idea what it means... > > Thanks for help, > M. > > Gesendet: Mittwoch, 24. April 2013 um 11:32 Uhr > Von: "Carlos Martín Sánchez" > An: "Mario Sickert" > Cc: users > Betreff: Re: [one-users] help, error creating VM (ssh port) > If the VMs sta

Re: [one-users] help, error creating VM (ssh port)

:17 Uhr Von: "Mario Sickert" An: "Carlos Martín Sánchez" Cc: "Mario Sickert" , users Betreff: Aw: Re: [one-users] help, error creating VM (ssh port) Hey, after creating vm still in pending mode. i checked the sched.log   Mon Apr 29 08:54:44 2013 [SCHED][I]:

Re: [one-users] help, error creating VM (ssh port)

> Thanks for help, > M. > > *Gesendet:* Mittwoch, 24. April 2013 um 11:32 Uhr > *Von:* "Carlos Martín Sánchez" > *An:* "Mario Sickert" > *Cc:* users > *Betreff:* Re: [one-users] help, error creating VM (ssh port) > If the VMs stay in pending state, th

Re: [one-users] help, error creating VM (ssh port)

http response? i have no idea what it means...   Thanks for help, M.   Gesendet: Mittwoch, 24. April 2013 um 11:32 Uhr Von: "Carlos Martín Sánchez" An: "Mario Sickert" Cc: users Betreff: Re: [one-users] help, error creating VM (ssh port) If the VMs stay in pending st

Re: [one-users] help, error creating VM (ssh port)

If the VMs stay in pending state, that means that the scheduler is not deploying them. Look for the mm_sched process, and check the shced logs in /var/log/one/sched.log. Regards -- Carlos Martín, MSc Project Engineer OpenNebula - The Open-source Solution for Data Center Virtualization www.OpenNeb

Re: [one-users] help, error creating VM (ssh port)

Hey, the oneadmin account is able to login from frontend to the host and reverse too. All this via ssh-key whitout password. "scp" data from one to other is also working fine. All demons running well. But creating VM ends in pending mode. Best regards, M. Am 19.04.2013 16:45, schrieb Carlos

Re: [one-users] help, error creating VM (ssh port)

Hi, You don't need to configure anything in OpenNebula regarding ssh, just make sure the oneadmin unix account ssh configuration is working properly. Regards -- Carlos Martín, MSc Project Engineer OpenNebula - The Open-source Solution for Data Center Virtualization www.OpenNebula.org | cmar...@o

[one-users] help, error creating VM (ssh port)

Hello, i got errors when creating new VM. Checking the logfiles i guess it caused on a different ssh-port i use. i changed ssh from port 22 to other four-digit number. How can i change ssh ports to create VM? Which Config do i have to alter? here the VM.log with errors: Mon Apr 15 11:52:11 2

Re: [one-users] Help to implement GetConsoleOutput

Hi, 1st problem: Extending $VMID is not supported as you said, but might be a good idea to do it for some attributes. Please open a request at dev.opennebula.org so we can consider it for future versions. Meanwhile, I think you can safely edit the deployment file in the vmm drivers, just before t

[one-users] Help to implement GetConsoleOutput

Hi there, I'm trying to implement the GetConsoleOutput EC2 primitive. This is useful to get details about the booting processe of an instance. Also, unchanged ubuntu cloudimages require the user to see the console output to see the generated password. I need to create a serial port on each inst

Re: [one-users] help, using DHCP for creating VMs

Hi Note that the IP assignment in OpenNebula is not enforced, they are used to generate MAC addresses, so you can freely generate a Virtual Networks. I see a couple of options: 1.- Do not use virtual networks at all. Add interfaces as: (you may need to update restricted attributes in OpenNebula)

Re: [one-users] help, using DHCP for creating VMs

Hi Ruben, my problem starts previously. how do i have to create the virt.Network befor creating a VM? In both possible cases (fixed, ranged) i have to use IP adresses or networks i dont be allowed to administer. I m dependent on getting IP adresses from our DHCP-server. best regards, M. Am 20

Re: [one-users] help, using DHCP for creating VMs

Hi Yes you have to create a Virtual Network. Then you can either contextualize your VMs [1] or use a virtual router with DHCP [2] Cheers Ruben [1] http://opennebula.org/documentation:rel3.8:cong [2] http://opennebula.org/documentation:rel3.8:router On Wed, Mar 20, 2013 at 9:37 AM, Mario Sicke

[one-users] help, using DHCP for creating VMs

Hi there, finally my opennebula system is running. The hosts are created and running well. now i try to create VMs by using DHCP for network. Normally all our machines getting IPs from DHCP-Server and i dont have the possibility to rule over our network. i m only an priviliged user. Do i ha

Re: [one-users] [help] one start

You have to set the permission rights to oneadmin in /var/log/one and /var/run/one chown -R oneadmin /var/log/one chown -R oneadmin /var/run/one Am 27.01.2013 16:15, schrieb Dimas Alif: when i do this an error occurs, where is the error and my error in installing OpenNebula? I use ubuntu 12:04

[one-users] [help] one start

when i do this an error occurs, where is the error and my error in installing OpenNebula? I use ubuntu 12:04 LTS, can explain the steps I've tried to install it as a step in opennebula.org but still there is an error .. oneadmin@oneadmin:~$ one start /usr/bin/one: line 142: /var/run/one/oned.pid: P

Re: [one-users] [HELP] Installasi Opennebula

Hi, On 24 January 2013 10:30, Dimas Alif wrote: > hay, > > The Master OpenNebula, are there OpenNebula master from Indonesia? > since I installed OpenNebula still do not understand and I still can not > open "localhost: 9869" .. > dimas dimas @: ~ S cat / var / log / one / sunstone.log >

[one-users] [HELP] Installasi Opennebula

hay, The Master OpenNebula, are there OpenNebula master from Indonesia? since I installed OpenNebula still do not understand and I still can not open "localhost: 9869" .. dimas dimas @: ~ S cat / var / log / one / sunstone.log -- server configuration -

Re: [one-users] [HELP] unable connect sunstone

still the same problem, if an error occurs because the installation steps OpenNebula mistake, friends can provide a step by step OpenNebula installation from start to finish (sunstone)? because I do not understand the steps in opennebula.org and there are several configurations that can not be inst

Re: [one-users] [HELP] unable connect sunstone

Hi, On 23 January 2013 07:47, Dimas Alif wrote: > hay, > config --> > dimas@dimas:~S cat /var/log/one/sunstone.log > -- > > Server configuration > -- > {:vnc_proxy_support_wss=>false, > :one_xmlrpc=>"http://localho

Re: [one-users] [HELP] unable connect sunstone

Try to set: host=>"0.0.0.0" to connect sunstone from anywhere, or: host=>"IP adress of node where sunstone is running" J.B. Dňa 23.01.2013 07:47, Dimas Alif wrote / napísal(a): hay, config --> dimas@dimas:~S ca

Re: [one-users] [HELP] unable connect sunstone

Hey, try changing the "host" parameter to the IP-adress of the computer, where Sunstone is running. Keeping it on 127.0.0.1 will only allow you to reach it from the same computer, where Sunstone is installed. Best regards, Markus > hay, > config --> > dimas@dimas:~S cat /var/log/one/sunstone

[one-users] [HELP] unable connect sunstone

hay, config --> dimas@dimas:~S cat /var/log/one/sunstone.log -- Server configuration -- {:vnc_proxy_support_wss=>false, :one_xmlrpc=>"http://localhost:2633/RPC2";, :marketplace_url=>"https://marketplace.c12g.com/app

Re: [one-users] [HELP] noVNC

You need to install curl. In Ubuntu it's apt-get install curl Centos and so yum install curl On Jan 22, 2013 6:51 PM, "Dimas Alif" wrote: > Hay, > i cann't install noVNC : > sudo ./install_noVNC.sh > Downloding noVNC lastest version > ./install_noVNC.sh: line 25: curl: command not found > \nE

[one-users] [HELP] noVNC

Hay, i cann't install noVNC : sudo ./install_noVNC.sh Downloding noVNC lastest version ./install_noVNC.sh: line 25: curl: command not found \nError downloading noVNC in cd /usr/share/one how can I be able to run install noVNC? and why after sunstone start, /etc/one/sunstone-server.conf inaccessible

Re: [one-users] [Help] Opennebula

On Thu, Jan 17, 2013 at 09:16:19AM +0700, Dimas Alif wrote: > helllo, > > Diploma thesis I'm working on "Implementation of OpenNebula In Local Area > Network", I did use ubuntu server .. how to connect ubuntu server with a > web browser to access OpenNebula? and whether there are teachers who can

[one-users] [Help] Opennebula

helllo, Diploma thesis I'm working on "Implementation of OpenNebula In Local Area Network", I did use ubuntu server .. how to connect ubuntu server with a web browser to access OpenNebula? and whether there are teachers who can teach me? mainly from Indonesia .. thanks ___

Re: [one-users] help: with 8021q driver, network configuration won't work, after host reboot (???)

, after host reboot (???) We've been using 802.1Q under CentOS 6 without problems for quite a long time. Can you post a detailed description of what is happening? Thanks On 30/11/12 07:57, users-requ...@lists.opennebula.org wrote: > > Message: 2 > Date: Fri, 30 Nov 2012 14:56:47 +0800 &g

Re: [one-users] help: with 8021q driver, network configuration won't work after host reboot

Hi, you are right. I've created a ticket to solve this for the next release: http://dev.opennebula.org/issues/1676 cheers, Jaime On Fri, Nov 30, 2012 at 7:56 AM, 于长江 wrote: > ** > As i said, with 8021q driver, network configuration won't work after > host reboot. Does One notice this? > > H

Re: [one-users] help: with 8021q driver, network configuration won't work, after host reboot (???)

oot (???) We've been using 802.1Q under CentOS 6 without problems for quite a long time. Can you post a detailed description of what is happening? Thanks On 30/11/12 07:57, users-requ...@lists.opennebula.org wrote: > > Message: 2 > Date: Fri, 30 Nov 2012 14:56:47 +0800 > From: ??

Re: [one-users] help: with 8021q driver, network configuration won't work, after host reboot (???)

without problems for quite a long time. Can you post a detailed description of what is happening? Thanks On 30/11/12 07:57, users-requ...@lists.opennebula.org wrote: > > Message: 2 > Date: Fri, 30 Nov 2012 14:56:47 +0800 > From: ??? > To: users > Subject: [one-users] help: with 8021

Re: [one-users] help: with 8021q driver, network configuration won't work, after host reboot (???)

hanks On 30/11/12 07:57, users-requ...@lists.opennebula.org wrote: > > Message: 2 > Date: Fri, 30 Nov 2012 14:56:47 +0800 > From: ??? > To: users > Subject: [one-users] help: with 8021q driver, network configuration > won't work after host reboot > Message-ID: <201

Re: [one-users] help: with 8021q driver, network configuration won't work, after host reboot (???)

[one-users] help: with 8021q driver, network configuration won't work after host reboot Message-ID: <201211301456470519...@neusoft.com> Content-Type: text/plain; charset="gb2312" As i said, with 8021q driver, network configuration won't work after host reboot. Do

[one-users] help: with 8021q driver, network configuration won't work after host reboot

As i said, with 8021q driver, network configuration won't work after host reboot. Does One notice this? Here is my solution for rhel below: (Is this ok?) # cat $ONE_LOCATION/var/remotes/vnm/802.1Q/HostManaged.rb require 'OpenNebulaNetwork' ... def create_bridge(bridge) OpenNebula.exec_and_

Re: [one-users] Help with Sandbox - VMware

Thanks Tino, it worked perfectly Best regards. Jairo 2012/8/28 Tino Vazquez > Dear Jairo, > > At the time of installing the ESX host, you have to input the information: > > * IP address -> you can set it by hand or rely on a DHCP server > * Password for the root user > > With this info you can

Re: [one-users] Help with Sandbox - VMware

Dear Jairo, At the time of installing the ESX host, you have to input the information: * IP address -> you can set it by hand or rely on a DHCP server * Password for the root user With this info you can log in to the ESX server from the vSphere client, and then change root password or create n

[one-users] Help with Sandbox - VMware

Dear all, I´m totally new in cloud computing and I want to start with opennebula sandbox VMware-based opennebula cloud. I have already done the firs part, but when I get stuck when I try to configure the hypervisor, I just don`t know what Ip Address nor user name nor password to set when the vsphe

Re: [one-users] Help to Download OpenNebula 3.6

tter to try to get to some x86_64 architecture of Linux if you can. Steve Timm From: users-boun...@lists.opennebula.org [mailto:users-boun...@lists.opennebula.org] On Behalf Of Olivier Sallou Sent: Thursday, July 19, 2012 7:37 AM Cc: Users@lists.opennebula.org Subject: Re: [one-users] H

Re: [one-users] Help to Download OpenNebula 3.6

Le 7/19/12 12:01 PM, Tuan Le Doan a écrit : > Hi all, > > I'm using CentOS 6.3 i386, and i want to install OpenNebula 3.6. But > when i search the rpm file in this link: > http://downloads.opennebula.org/ , it just have OpenNebula 3.6 for > CentOS x86-64, don't support for CentOs i386 :( > Can an

[one-users] Help to Download OpenNebula 3.6

Hi all, I'm using CentOS 6.3 i386, and i want to install OpenNebula 3.6. But when i search the rpm file in this link: http://downloads.opennebula.org/ , it just have OpenNebula 3.6 for CentOS x86-64, don't support for CentOs i386 :( Can anyone help me? How can i find the setup file of OpenNebula

Re: [one-users] help with configuration

Le 5/16/12 3:33 PM, Hamza Habib a écrit : > > My name is Hamza. I am new to OpenNebula, I was just wondering if I > could get some hint on how to set up OpenNebula. I am following > instructions provided on the following web > site https://help.ubuntu.com/community/OpenNebula. However, when I > t

Re: [one-users] Help with datastore feature

Dear list, I'm writing this in case someone stumbles with the same problem. In the end Robert managed to fix this by setting I needed to modify /etc/libvirt/qemu.conf to set > user = "oneadmin" > group = "cloud" You can read more about this in OpenNebula's documentation, specifically in: http:/

[one-users] Help required

My name is Deff. I am new to OpenNebula, I was just wondering if I could get some hint on how to set up OpenNebula. I am following instructions provided on the following web site https://help.ubuntu.com/community/OpenNebula. However, when I typed the following command on on step 2 $ onehost add

Re: [one-users] Help with datastore feature

On 05/14/2012 10:11 AM, Jaime Melis wrote: Hi Robert, Let's see if you can pinpoint where the problem is. A few ideas you may check: - Has the 'oneadmin' user the same unix id across all the servers? Yes - You said in your email that "ownership change is disabled" however in the documentat

Re: [one-users] Help with datastore feature

Hi Robert, Let's see if you can pinpoint where the problem is. A few ideas you may check: - Has the 'oneadmin' user the same unix id across all the servers? - You said in your email that "ownership change is disabled" however in the documentation [1] it states that "To be able to use the images

Re: [one-users] Help with datastore feature

On 05/11/2012 04:17 PM, Ruben S. Montero wrote: Hi Robert, From your output it seems that the problem is probably at the libvirt configuration. In particular: Fri May 11 14:48:00 2012 [VMM][I]: WARNING: no socket to connect to Well, I have made no changes from previous working versions w.r.t

Re: [one-users] Help with datastore feature

Hi Robert, >From your output it seems that the problem is probably at the libvirt configuration. In particular: Fri May 11 14:48:00 2012 [VMM][I]: WARNING: no socket to connect to Could you double check the configuration hints at http://www.opennebula.org/documentation:rel3.4:kvmg#kvm_configura

Re: [one-users] Help with datastore feature

On 05/11/2012 11:09 AM, Jaime Melis wrote: Hello Robert, Oh, I think I see where the problem is: You used vnm_kvm as the host network (vnm) drivers, but only: dummy, fw, 802.1Q, ebtables and ovswitch are the only accepted values. See [1]. I reckon you need 'dummy'. onehost create -i im_kvm -v

Re: [one-users] Help with datastore feature

Hello Robert, Oh, I think I see where the problem is: You used vnm_kvm as the host network (vnm) drivers, but only: dummy, fw, 802.1Q, ebtables and ovswitch are the only accepted values. See [1]. I reckon you need 'dummy'. onehost create -i im_kvm -v vmm_kvm -n dummy [1] http://opennebula.org/

Re: [one-users] Help with datastore feature

On 05/11/2012 09:37 AM, Jaime Melis wrote: It's supposed to be created when the host is successfully monitored. Is it? onehost list appears to indicate that everything is OK: ID NAME CLUSTER RVM TCPU FCPU ACPU TMEM FMEM AMEM STAT 0 192.168.1.20 - 020

Re: [one-users] Help with datastore feature

It's supposed to be created when the host is successfully monitored. Is it? On Fri, May 11, 2012 at 3:35 PM, Robert Schweikert wrote: > On 05/07/2012 11:44 AM, Jaime Melis wrote: >> >> Hi Robert, >> >> could you please send us /var/log/one/.log > > > Here it is: > >> cat /media/03B7-3E00/0.log >

Re: [one-users] Help with datastore feature

On 05/07/2012 11:44 AM, Jaime Melis wrote: Hi Robert, could you please send us /var/log/one/.log Here it is: > cat /media/03B7-3E00/0.log Fri May 4 18:04:09 2012 [DiM][I]: New VM state is ACTIVE. Fri May 4 18:04:09 2012 [LCM][I]: New VM state is PROLOG. Fri May 4 18:04:09 2012 [VM][I]: Vir

Re: [one-users] Help with datastore feature

Hi Robert, could you please send us /var/log/one/.log Another thing, is the image in READY status? (I'm concerned about the SAFE_DIRS directive). Regards, Jaime On Sat, May 5, 2012 at 12:06 AM, Robert Schweikert wrote: -- Jaime Melis Project Engineer OpenNebula - The Open Source Toolkit for

Re: [one-users] Help with sunstone authentication

Hello Robert, this is indeed a bug, a race condition as you have suggested. We have created an issue in order to fix it: http://dev.opennebula.org/issues/1269 In the mean time, introducing a sleep 5 after oned starts or right before sunstone server starts should fix the problem. Thanks for repor

[one-users] Help with datastore feature

Hi, I am running into some issues with my test setup to verify that the packages I am building in OBS work, at least on a basic level. Switching to 3.4.1 I am back to getting node registration (this happens automatically in my test setup and the changes to onehost create tripped me up at fir

Re: [one-users] Help with sunstone authentication

On 05/04/2012 02:35 PM, Daniel Molina wrote: Hi Robert, On 4 May 2012 20:11, Robert Schweikert mailto:rjsch...@suse.com>> wrote: On 05/04/2012 01:58 PM, Robert Schweikert wrote: Hi, Trying to run sunstone I get the following error ins the log file: ---

Re: [one-users] Help with sunstone authentication

Hi Robert, On 4 May 2012 20:11, Robert Schweikert wrote: > On 05/04/2012 01:58 PM, Robert Schweikert wrote: > >> Hi, >> >> Trying to run sunstone I get the following error ins the log file: >> >> --** >> Server configuration >> --**

Re: [one-users] Help with sunstone authentication

On 05/04/2012 01:58 PM, Robert Schweikert wrote: Hi, Trying to run sunstone I get the following error ins the log file: -- Server configuration -- {:vnc_proxy_cert=>nil, :auth=>"sunstone", :vnc_proxy_path=>nil, :vnc_proxy_k

[one-users] Help with sunstone authentication

Hi, Trying to run sunstone I get the following error ins the log file: -- Server configuration -- {:vnc_proxy_cert=>nil, :auth=>"sunstone", :vnc_proxy_path=>nil, :vnc_proxy_key=>nil, :vnc_proxy_support_wss=>fals

Re: [one-users] help with a configuration

Hello Jan, this line is confusing me: I don't want to share anything > between the host and the frontend but i can mount filesystems from the > host to the frontend on demand. Can you export from your SAN system both to your host and to your frontend? In that case you can mount a shared /var/l

Re: [one-users] Help with configuration openNebula 3.2 with RHEL 6.2 and VMware include to Sunstone GUI

FYI -- Constantino Vázquez Blanco, MSc Project Engineer OpenNebula - The Open-Source Solution for Data Center Virtualization www.OpenNebula.org | @tinova79 | @OpenNebula On Wed, Feb 15, 2012 at 4:17 PM, Tino Vazquez wrote: > Hi Oemer, > > Hector is very right, ONE 3.2 comes with VMware support

Re: [one-users] Help with configuration openNebula 3.2 with RHEL 6.2 and VMware include to Sunstone GUI

Hello, Sunstone doesnt show the vmware drivers because of a bug[1]. It was solved so you can try applying the patch [2]. However oned.log shows there are other issues with your setup which seem unrelated to Sunstone... hope others can help with that. Hector [1] http://dev.opennebula.org/iss

[one-users] help with a configuration

I have a single server with access to a SAN System. I would like to use this server as a (cluster) node [host] and virtualize the frontend on my working place computer with virtualbox. I don't want to share anything between the host and the frontend but i can mount filesystems from the host to the

Re: [one-users] help me opennebula installation

Have you runned scons without error? http://opennebula.org/documentation:rel3.2:compile 2012/1/31 Son Thach : > > oneadmin@son-K43SJ:~/opennebula-2.1.80$ ./install.sh -u oneadmin -g cloud -d > /srv/cloud/one > cp: cannot stat `/srv/cloud/one/opennebula-2.1.80/src/nebula/oned': No such > file or d

[one-users] help me opennebula installation

oneadmin@son-K43SJ:~/opennebula-2.1.80$ ./install.sh -u oneadmin -g cloud -d /srv/cloud/one cp: cannot stat `/srv/cloud/one/opennebula-2.1.80/src/nebula/oned': No such file or directory cp: cannot stat `/srv/cloud/one/opennebula-2.1.80/src/scheduler/src/sched/mm_sched': No such file or directory h

Re: [one-users] Help required

Hi, As displayed on OpenNebula wiki [1] in the Tutorials section, you can find a good step-by-step tutorial at [2]. Best regards, Florian [1] http://wiki.opennebula.org/ [2] http://redes-privadas-virtuales.blogspot.com/search/label/Cloud%20computing On Tue, Jan 24, 2012 at 10:30 AM, Habib Khada

[one-users] Help required

My name is Khadar and I am a new user on OpenNebula, can anybody help me with step by step tutorial on how to install and configure OpenNebual. I am finding difficult to follow the guide/instruction of installing OpenNebula 3.2 provided on the web site, especially the codes/commands as I can't

Re: [one-users] Help!!

You can use iSCSI/FC as those provide a device that can be attached to the VMs but you will need to provide your own drivers to manage those iSCSI/FC sources. These drivers are not provided in the standard distribution of OpenNebula. 2012/1/5 Alejandro Santoyo González : > >  Hi users, > > I need

Re: [one-users] Help!

hi, 2012/1/5 Alejandro Santoyo González : > I need help with opennebula 3.0, I need to know if I can manage a SAN > storage solution(iSCSI or FC or..) with opennebula 3.0.Please I'll > appreciate any help or information.Excuse my english. > create a shared filesystem on top of your san. e.g.

[one-users] Help!

Hi users, I need help with opennebula 3.0, I need to know if I can manage a SAN storage solution(iSCSI or FC or..) with opennebula 3.0.Please I'll appreciate any help or information.Excuse my english. Regards Participe en Universidad 2012, del 13 al 17 de febrero de 2012. Habana, Cuba: htt

Re: [one-users] [Help] How to reboot a VM when the VM crashes?

On Thu, Dec 22, 2011 at 11:10 PM, Hutson Betts wrote: > So there are conditions in which a VM becomes un-recoverable without > permanent data loss. Hmm... > > Well, hopefully the VM life-cycle can be modified to support restarts > with disk image persistence (Persistence in the $VMID folder, NOT t

Re: [one-users] [Help] How to reboot a VM when the VM crashes?

So there are conditions in which a VM becomes un-recoverable without permanent data loss. Hmm... Well, hopefully the VM life-cycle can be modified to support restarts with disk image persistence (Persistence in the $VMID folder, NOT the image repository), and extend it to OCCI. -- Hutson Betts C

Re: [one-users] [Help] How to reboot a VM when the VM crashes?

On Thu, Dec 22, 2011 at 7:35 PM, Hutson Betts wrote: > To force a hypervisor-level restart, the following command should > suffice: > onevm restart [VMID] > > As per the documentation: > "restart: Forces the hypervisor boot action of a VM stuck in UNKNOWN or > BOOT state." This won't work. It can

Re: [one-users] [Help] How to reboot a VM when the VM crashes?

To force a hypervisor-level restart, the following command should suffice: onevm restart [VMID] As per the documentation: "restart: Forces the hypervisor boot action of a VM stuck in UNKNOWN or BOOT state." You can reference the diagram on: http://opennebula.org/documentation:rel3.0:vm_guide_2 Wh

Re: [one-users] [Help] How to reboot a VM when the VM crashes?

Could you tell me how to force a hypervisor-level restart ? 2011/12/22 Hutson Betts > Actually, the SHUTDOWN command, for both OCCI and ONE, is equivalent to > pressing the power button on a computer, and once it's off, taking the > hard drive and smashing it with a hammer. > > SHUTDOWN deletes

Re: [one-users] [Help] How to reboot a VM when the VM crashes?

Actually, the SHUTDOWN command, for both OCCI and ONE, is equivalent to pressing the power button on a computer, and once it's off, taking the hard drive and smashing it with a hammer. SHUTDOWN deletes the disk image, and transitions the VM to the DONE state. I would like to keep a VM, and it's fi

  1   2   >