Re: [one-users] Can't install VMware ESXI 5.5, 5.1 and 5.0 onto the PC with Asus P5QPL-AM motherboard and Intel E6750 CPU
dear opennebula community, follow the process to create VMWARE ESXi5.0 VMs using OpenNebula, every steps are working fine, e.g. get below return when run /srv/cloud/one/var/remotes/im/run_probes vmware 0 esxi01 HYPERVISOR=vmware TOTALCPU=400 FREECPU=400 CPUSPEED=3192 TOTALMEMORY=8106080 FREEMEMORY=6484864 but when run onehost create esxi01 im_vmware vmm_vmware tm_vmware dummy, get below error: Wrong number of arguments The arguments should be: hostname did some research, can't find a solution for this. it is much appreciated if anyone can help. kind regards, q.s. On Fri, Jan 10, 2014 at 4:44 PM, Qiubo Su (David Su) qiub...@gmail.comwrote: Dear OpenNebula Community, In the VMware Configuration section of VMware Drivers 3.8 in the page of http://archives.opennebula.org/documentation:archives:rel3.8:evmwareg, below information is for setting The access via SSH needs to be passwordless: $ su - $ mkdir /etc/ssh/keys-oneadmin $ chmod 755 /etc/ssh/keys-oneadmin $ su - oneadmin $ vi /etc/ssh/keys-oneadmin/authorized_keys paste here the contents of the oneadmin's front-end account public key (FE - $HOME/.ssh/id_{rsa,dsa}.pub) and exit vi $ chmod 600 /etc/ssh/keys-oneadmin/authorized_keys After the setup, can access via ESXI server from front end server through SSH without password, however when reboot the ESXI server, the setup is disappeared, i.e. the /keys-oneadmin/ folder and the authorized_keys file are disappeared after reboot the ESXI server. It is much appreciated if you can help with why the setup disappeared and how to resolve it? By the way, the front end server is with Ubuntu 12.04 OS and OpenNebula 3.8.1, the ESXI server is with CentOS 5.10 OS. Thanks kindly, Q.S. On Sun, Dec 15, 2013 at 11:57 AM, Qiubo Su (David Su) qiub...@gmail.comwrote: Dear OpenNebula Community, I want to install VMware ESXI 5.5, 5.1 and 5.0 onto the PC with AsusP5QPL-AM motherboard and Intel E6750 CPU, but got below error: *No network adapters were detected. Either no network adapters are physically connected to the system, or a suitable driver could not be located. A third party driver may required.* *Ensure that there is at least one network adapter physically connected to the system before attempting installation. If the problem persists, consult the VMware Knowledge Base.* The PC does have a network adapter, and the Linux OS installed can access to Internet through the Ethernet card with no problem. This doesn't look like the compatibility issue, due to get the same error when trying to install VMware ESXI 5.5, 5.1 and 5.0 onto the same PC. It is much appreciated if you can help with this. Moreover I have been using KVM as hypervisor, and it has been no issue, so easy to use. Thanks kindly, Q.S ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
Re: [one-users] Closing OpenNebula 4.4 Cycle, Planning for 4.6
Tino Vazquez cvazq...@c12g.com writes: [...] As discussed with the OpenNebula Conf attendees (see? you need to come next year ;) ), we want to give our users the chance to shape the roadmap for the upcoming OpenNebula 4.6. Hello, Thanks a lot for giving us the opportunity to participate on the roadmap plan. It already seems quite busy, looking at issues not in 4.6 roadmap I would say, for my personal use: #1290 “Allowing autostart setting for KVM deployed VMs with persistent images, to restart them upon node reboot” It ease the “reboot after upgrade” for single node configuration. Today, on my single node, I need to stop all my VMs before doing the reboot and resume them by hand when reboot is done for my professional use: #2417 “Move images between datastores” -- It may be somewhat related to #2591 “Share resources between clusters” #2545 “Decorrelate networks TYPE and IP management” --- I'm quite sure this one is big enough to be delayed after 4.6. Ideally, the VM name and its IPs should match between ONE leases and my DHCP server but I don't figure it out. I think it's related to #2348 “Add static MAC address to” (I forget the VM NIC) Regards. -- Daniel Dehennin Récupérer ma clef GPG: gpg --keyserver pgp.mit.edu --recv-keys 0x7A6FE2DF pgpf0JWXR92Gu.pgp Description: PGP signature ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
[one-users] Strange error got when run onehost create esxi01 im_vmware vmm_vmware tm_vmware dummy from the OpenNebula front end server - Qiubo David Su
dear opennebula community, follow the process to create VMWARE ESXi5.0 VMs using OpenNebula, every steps are working fine, e.g. get below return when run /srv/cloud/one/var/remotes/im/run_probes vmware 0 esxi01 HYPERVISOR=vmware TOTALCPU=400 FREECPU=400 CPUSPEED=3192 TOTALMEMORY=8106080 FREEMEMORY=6484864 but when run onehost create esxi01 im_vmware vmm_vmware tm_vmware dummy, get below error: Wrong number of arguments The arguments should be: hostname this error is so strange. did some research, can't find a solution for this. it is much appreciated if anyone can help with this. by the way, the environment is that opennebula front end server is a VM created in a physical machine and VMware ESXI 5.0 sever is installed in a separate physical machine. kind regards, q.s. On Fri, Jan 10, 2014 at 4:44 PM, Qiubo Su (David Su) qiub...@gmail.comwrote: Dear OpenNebula Community, In the VMware Configuration section of VMware Drivers 3.8 in the page of http://archives.opennebula.org/documentation:archives:rel3.8:evmwareg, below information is for setting The access via SSH needs to be passwordless: $ su - $ mkdir /etc/ssh/keys-oneadmin $ chmod 755 /etc/ssh/keys-oneadmin $ su - oneadmin $ vi /etc/ssh/keys-oneadmin/authorized_keys paste here the contents of the oneadmin's front-end account public key (FE - $HOME/.ssh/id_{rsa,dsa}.pub) and exit vi $ chmod 600 /etc/ssh/keys-oneadmin/authorized_keys After the setup, can access via ESXI server from front end server through SSH without password, however when reboot the ESXI server, the setup is disappeared, i.e. the /keys-oneadmin/ folder and the authorized_keys file are disappeared after reboot the ESXI server. It is much appreciated if you can help with why the setup disappeared and how to resolve it? By the way, the front end server is with Ubuntu 12.04 OS and OpenNebula 3.8.1, the ESXI server is with CentOS 5.10 OS. Thanks kindly, Q.S. On Sun, Dec 15, 2013 at 11:57 AM, Qiubo Su (David Su) qiub...@gmail.comwrote: Dear OpenNebula Community, I want to install VMware ESXI 5.5, 5.1 and 5.0 onto the PC with AsusP5QPL-AM motherboard and Intel E6750 CPU, but got below error: *No network adapters were detected. Either no network adapters are physically connected to the system, or a suitable driver could not be located. A third party driver may required.* *Ensure that there is at least one network adapter physically connected to the system before attempting installation. If the problem persists, consult the VMware Knowledge Base.* The PC does have a network adapter, and the Linux OS installed can access to Internet through the Ethernet card with no problem. This doesn't look like the compatibility issue, due to get the same error when trying to install VMware ESXI 5.5, 5.1 and 5.0 onto the same PC. It is much appreciated if you can help with this. Moreover I have been using KVM as hypervisor, and it has been no issue, so easy to use. Thanks kindly, Q.S ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org