Hi Brad,
We are using the deduplication capabilities of NetApp storage system, you could
create a new transfer manager and rewriting the clone command to use the clone
volume command of NetApp, for example... it works well for us and the change
isn´t very agresive in your OpenNebula
bump!
anyone ?
On 11 July 2014 16:30, Adam Fyfe adam.fy...@gmail.com wrote:
Hi,
I have 1 ON server and 1 additional ON host.
I would like the setup so that ALL storage / datastores are on the iSCSI
SAN.
The iSCSI volume is mounted on each server ext4 netdev iSCSI using native
CentOS
Hi Adam,
In your case I would set up a clustered file system on the iSCSI volume.
For OpenNebula that will be transparant, simply configure it as shared. You
can also use the LVM drivers for this:
http://docs.opennebula.org/4.6/administration/storage/fs_lvm_ds.html
I wouldn't use NFS if I were
Hi!
I just installed CentOS 7 and one-context package you linked. All
scripts works ok except network configurator. Looks like this is because
vmcontext script looking for interfaces named eth*, but I configured vm
with rtl8139 card and in system this card showing as ens3.
Any ideas about
Dear community,
As OpenNebula 4.8 comes closer, we would like to launch a call for
translations of our web-based user interface: Sunstone.
It is very easy: the existing translations can be updated and new
translations submitted through our project site at Transifex
Hello, I am facing a problem while creating an host on opennebula.
I followed the official documentation and achieved it in the past, on
the very same machine
(http://docs.opennebula.org/4.6/design_and_installation/quick_starts/qs_centos_xen.html#qs-centos-xen)
without having this problem.
Hello,
I have installed OpenNebula 4.6.2 and when I try to run the daemon:
one start
always I see
oned failed to start
in /var/log/one/oned.log, the logs don't show anything.
Thank you!
María Jular Castañeda
Técnico de Sistemas
Tfn: +34-987-29 33 23 / e-mail:
Hi,
On Fri, Jul 11, 2014 at 3:58 PM, Mateusz Skała mateusz.sk...@budikom.net
wrote:
Hi,
After reboot my kvm host I have some VM's in state FAILED. There is no
other option to repair this VM than use delete --recreate, but if I use
this, data stored into VM disrepair. What I'm doing wrong?
The linked package is meant to be a fix and should work with network
names not called ETH*. I've tested here with a virtio network. I'll
try with an emulated card then.
On Tue, Jul 15, 2014 at 12:56 PM, Maxim Terletskiy terlets...@emu.ru wrote:
Hi!
I just installed CentOS 7 and one-context
Hi,
On Thu, Jul 10, 2014 at 11:15 AM, Anandharaj Subramaniam
anandharaj.man...@mimos.my wrote:
Hi,
I would like to have an inventory of all the VM running on OpenNebula.
Running “onevm list” doesn’t not have all the info that I need. According
to “onevm” help page (--list x y c ), I
Hi,
On Thu, Jul 10, 2014 at 11:24 AM, Anandharaj Subramaniam
anandharaj.man...@mimos.my wrote:
Hi,
Is there any housekeeping been done in MySQL by OpenNebula? I believe all
the monitoring status will be stored in MySQL so it is good to do clean-up
on regular basis. Please advice
The
The configuration file is correctly generated
(/etc/sysconfig/network-scripts/ifcfg-ens3) but is not started up.
I've added an ifup after interface configuration. Here is the new
version
http://dev.opennebula.org/attachments/download/796/one-context_4.7.1.rpm
On Tue, Jul 15, 2014 at 3:08 PM,
On 15/07/14 09:36, users-requ...@lists.opennebula.org wrote:
Date: Tue, 15 Jul 2014 14:36:41 +0200
From: Maria Jularmaria.ju...@fcsc.es
To: usersusers@lists.opennebula.org
Subject: [one-users] OpenNebula 4.6.2
Message-ID:
6e63da784fc69a4ab89d50f1abe4f4b7026fbda08...@exserver.lo.fcsc.es
I found the problem in my setup. I'm using 4.2 and it is generating next
context:
CONTEXT
ETH0_IP10.10.10.60
NETWORKYES
TARGEThda
DISK_ID3
ETH0_MASK255.255.255.0
ETH0_GATEWAY10.10.10.1
ETH0_DNS8.8.8.8
As I see 00-network in get_context_interfaces() function
It is not possible as MAC address is used to find the correct
interface as we can not rely in the old naming (ETH0, ETH1, etc).
You can add the mac address manually in the context:
ETH0_MAC = $NIC[MAC, NETWORK=\network name\]
On Tue, Jul 15, 2014 at 4:52 PM, Maxim Terletskiy terlets...@emu.ru
Hello,
We would like to create a few templates with persistent images so they
can be shared with a group of users, so then users can provision new
VM's, each having its own VM with persistent image. The persistent image
is bacause we want that VM's be users personal VM's (aka desktops).
But
Dear All,
Is there any ready to go template / image available for Windows version OS
in the market?
I am still trying hard to run the Windows 7 OS, but either stays at Blue
Screen or says Boot Disk not found.
I have tried the suggested work around but seems like I am not able to make
up. The
17 matches
Mail list logo