Re: [one-users] Type Filesystem
Hello, I attach a pic with the field where you have to fill the filesystem type. I’m using “vmdk_thin”. Thank you! María Jular Castañeda Técnico de Sistemas Tfn: +34-987-29 33 23 / e-mail: maria.ju...@fcsc.esmailto:x...@fcsc.es http://www.fcsc.es Edificio CRAI-TIC. Campus de Vegazana, s/n. Universidad de León 24071 León [cid:image001.jpg@01CFBDE3.65D29880] [cid:image002.png@01CFBDE3.65D29880] Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si Vd. no es el destinatario indicado, queda notificado de que la lectura, utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. El correo electrónico vía Internet no permite asegurar la confidencialidad de los mensajes que se transmiten ni su integridad o correcta recepción. La Fundación Centro de Supercomputación de Castilla y León no asume ninguna responsabilidad por estas circunstancias. This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by a professional privilege or whose disclosure is prohibited by law. If you are not the intended recipient you are hereby notified that any read, dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it. Internet e-mail neither guarantees the confidentiality nor the integrity or proper receipt of the messages sent. Fundación Centro de Supercomputación de Castilla y León does not assume any liability for those circumstances. De: Javier Fontan [mailto:jfon...@opennebula.org] Enviado el: jueves, 21 de agosto de 2014 15:48 Para: Maria Jular CC: users Asunto: Re: [one-users] Type Filesystem I don't fully inderstand the question. Anyway for VMware you either use a SAN connected to the hypervisor nodes using vmfs or you export an NFS share to them. For NFS we have been using ext4 from a linux machine without troubles. 2014-08-20 10:01 GMT+02:00 Maria Jular maria.ju...@fcsc.esmailto:maria.ju...@fcsc.es: Hello, What filesystem type is the best to create a datablock image in Sunstone using vmware with opennebula 4.6.2? Thank you! María Jular Castañeda Técnico de Sistemas Tfn: +34-987-29 33 23tel:%2B34-987-29%2033%2023 / e-mail: maria.ju...@fcsc.esmailto:x...@fcsc.es http://www.fcsc.es Edificio CRAI-TIC. Campus de Vegazana, s/n. Universidad de León 24071 León [cid:image001.jpg@01CFBDE3.65D29880] [cid:image002.png@01CFBDE3.65D29880] Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si Vd. no es el destinatario indicado, queda notificado de que la lectura, utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. El correo electrónico vía Internet no permite asegurar la confidencialidad de los mensajes que se transmiten ni su integridad o correcta recepción. La Fundación Centro de Supercomputación de Castilla y León no asume ninguna responsabilidad por estas circunstancias. This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by a professional privilege or whose disclosure is prohibited by law. If you are not the intended recipient you are hereby notified that any read, dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it. Internet e-mail neither guarantees the confidentiality nor the integrity or proper receipt of the messages sent. Fundación Centro de Supercomputación de Castilla y León does not assume any liability for those circumstances. ___ Users mailing list Users@lists.opennebula.orgmailto:Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org -- Javier Fontán Muiños Developer OpenNebula - Flexible Enterprise Cloud Made Simple www.OpenNebula.orghttp://www.OpenNebula.org | @OpenNebula | github.com/jfontanhttp://github.com/jfontan ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
Re: [one-users] Windows Instalaltion
If you use KVM as the hypervisor, there is a known issue where the I/O emulation is substantially slowed by the continuous fsync that the installer performs. The fastest solution is to apply the property CACHE=UNSAFE to the disk where windows is installed, and change it later (either deleting it, using DEFAULT or one of the other cache modes supported by KVM). This will force KVM to ignore the continuous read/write/check that is performed sector by sector and will speed it up substantially the process. Remember to change it later- there is a reason why the mode is called unsafe... it should be used only for this specific purposes and not in production. regards, carlo daffara cloudweavers - Messaggio originale - Da: Maria Jular maria.ju...@fcsc.es A: users users@lists.opennebula.org Inviato: Venerdì, 22 agosto 2014 8:26:07 Oggetto: [one-users] Windows Instalaltion Hello, I have a problem when I create a WINDOWS virtual machine from iso in Sunstone . I attach a pic. The installation process hangs at that point and doesn’t continue. Thank you! María Jular Castañeda Técnico de Sistemas Tfn: +34-987-29 33 23 / e-mail: maria.ju...@fcsc.es http://www.fcsc.es Edificio CRAI-TIC. Campus de Vegazana, s/n. Universidad de León 24071 León Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si Vd. no es el destinatario indicado, queda notificado de que la lectura, utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. El correo electrónico vía Internet no permite asegurar la confidencialidad de los mensajes que se transmiten ni su integridad o correcta recepción. La Fundación Centro de Supercomputación de Castilla y León no asume ninguna responsabilidad por estas circunstancias. This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by a professional privilege or whose disclosure is prohibited by law. If you are not the intended recipient you are hereby notified that any read, dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it. Internet e-mail neither guarantees the confidentiality nor the integrity or proper receipt of the messages sent. Fundación Centro de Supercomputación de Castilla y León does not assume any liability for those circumstances. ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
Re: [one-users] Windows Instalaltion
It's not applicable to vmware; regards carlo - Messaggio originale - Da: Maria Jular maria.ju...@fcsc.es A: Carlo Daffara carlo.daff...@cloudweavers.eu Cc: users users@lists.opennebula.org Inviato: Venerdì, 22 agosto 2014 10:02:04 Oggetto: RE: Windows Instalaltion Hello Carlo, I'm using vmware. Will this solution (CACHE=UNSAFE) is valid too? Thank you! María Jular Castañeda Técnico de Sistemas Tfn: +34-987-29 33 23 / e-mail: maria.ju...@fcsc.es http://www.fcsc.es Edificio CRAI-TIC. Campus de Vegazana, s/n. Universidad de León 24071 León Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si Vd. no es el destinatario indicado, queda notificado de que la lectura, utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. El correo electrónico vía Internet no permite asegurar la confidencialidad de los mensajes que se transmiten ni su integridad o correcta recepción. La Fundación Centro de Supercomputación de Castilla y León no asume ninguna responsabilidad por estas circunstancias. This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by a professional privilege or whose disclosure is prohibited by law. If you are not the intended recipient you are hereby notified that any read, dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it. Internet e-mail neither guarantees the confidentiality nor the integrity or proper receipt of the messages sent. Fundación Centro de Supercomputación de Castilla y León does not assume any liability for those circumstances. -Mensaje original- De: Users [mailto:users-boun...@lists.opennebula.org] En nombre de Carlo Daffara Enviado el: viernes, 22 de agosto de 2014 9:12 CC: users Asunto: Re: [one-users] Windows Instalaltion If you use KVM as the hypervisor, there is a known issue where the I/O emulation is substantially slowed by the continuous fsync that the installer performs. The fastest solution is to apply the property CACHE=UNSAFE to the disk where windows is installed, and change it later (either deleting it, using DEFAULT or one of the other cache modes supported by KVM). This will force KVM to ignore the continuous read/write/check that is performed sector by sector and will speed it up substantially the process. Remember to change it later- there is a reason why the mode is called unsafe... it should be used only for this specific purposes and not in production. regards, carlo daffara cloudweavers - Messaggio originale - Da: Maria Jular maria.ju...@fcsc.es A: users users@lists.opennebula.org Inviato: Venerdì, 22 agosto 2014 8:26:07 Oggetto: [one-users] Windows Instalaltion Hello, I have a problem when I create a WINDOWS virtual machine from iso in Sunstone . I attach a pic. The installation process hangs at that point and doesn’t continue. Thank you! María Jular Castañeda Técnico de Sistemas Tfn: +34-987-29 33 23 / e-mail: maria.ju...@fcsc.es http://www.fcsc.es Edificio CRAI-TIC. Campus de Vegazana, s/n. Universidad de León 24071 León Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si Vd. no es el destinatario indicado, queda notificado de que la lectura, utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. El correo electrónico vía Internet no permite asegurar la confidencialidad de los mensajes que se transmiten ni su integridad o correcta recepción. La Fundación Centro de Supercomputación de Castilla y León no asume ninguna responsabilidad por estas circunstancias. This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by a professional privilege or whose disclosure is prohibited by law. If you are not the intended recipient you are hereby notified that any read, dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it. Internet e-mail neither guarantees the confidentiality nor the integrity or proper receipt of the messages sent. Fundación Centro de Supercomputación de Castilla y León does not assume any liability for those circumstances. ___ Users mailing list Users@lists.opennebula.org
Re: [one-users] Windows Instalaltion
Then... How can I solve the problem? Thank you! María Jular Castañeda Técnico de Sistemas Tfn: +34-987-29 33 23 / e-mail: maria.ju...@fcsc.es http://www.fcsc.es Edificio CRAI-TIC. Campus de Vegazana, s/n. Universidad de León 24071 León Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si Vd. no es el destinatario indicado, queda notificado de que la lectura, utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. El correo electrónico vía Internet no permite asegurar la confidencialidad de los mensajes que se transmiten ni su integridad o correcta recepción. La Fundación Centro de Supercomputación de Castilla y León no asume ninguna responsabilidad por estas circunstancias. This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by a professional privilege or whose disclosure is prohibited by law. If you are not the intended recipient you are hereby notified that any read, dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it. Internet e-mail neither guarantees the confidentiality nor the integrity or proper receipt of the messages sent. Fundación Centro de Supercomputación de Castilla y León does not assume any liability for those circumstances. -Mensaje original- De: Users [mailto:users-boun...@lists.opennebula.org] En nombre de Carlo Daffara Enviado el: viernes, 22 de agosto de 2014 10:02 CC: users Asunto: Re: [one-users] Windows Instalaltion It's not applicable to vmware; regards carlo - Messaggio originale - Da: Maria Jular maria.ju...@fcsc.es A: Carlo Daffara carlo.daff...@cloudweavers.eu Cc: users users@lists.opennebula.org Inviato: Venerdì, 22 agosto 2014 10:02:04 Oggetto: RE: Windows Instalaltion Hello Carlo, I'm using vmware. Will this solution (CACHE=UNSAFE) is valid too? Thank you! María Jular Castañeda Técnico de Sistemas Tfn: +34-987-29 33 23 / e-mail: maria.ju...@fcsc.es http://www.fcsc.es Edificio CRAI-TIC. Campus de Vegazana, s/n. Universidad de León 24071 León Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si Vd. no es el destinatario indicado, queda notificado de que la lectura, utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. El correo electrónico vía Internet no permite asegurar la confidencialidad de los mensajes que se transmiten ni su integridad o correcta recepción. La Fundación Centro de Supercomputación de Castilla y León no asume ninguna responsabilidad por estas circunstancias. This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by a professional privilege or whose disclosure is prohibited by law. If you are not the intended recipient you are hereby notified that any read, dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it. Internet e-mail neither guarantees the confidentiality nor the integrity or proper receipt of the messages sent. Fundación Centro de Supercomputación de Castilla y León does not assume any liability for those circumstances. -Mensaje original- De: Users [mailto:users-boun...@lists.opennebula.org] En nombre de Carlo Daffara Enviado el: viernes, 22 de agosto de 2014 9:12 CC: users Asunto: Re: [one-users] Windows Instalaltion If you use KVM as the hypervisor, there is a known issue where the I/O emulation is substantially slowed by the continuous fsync that the installer performs. The fastest solution is to apply the property CACHE=UNSAFE to the disk where windows is installed, and change it later (either deleting it, using DEFAULT or one of the other cache modes supported by KVM). This will force KVM to ignore the continuous read/write/check that is performed sector by sector and will speed it up substantially the process. Remember to change it later- there is a reason why the mode is called unsafe... it should be used only for this specific purposes and not in production. regards, carlo daffara cloudweavers - Messaggio originale - Da: Maria Jular maria.ju...@fcsc.es A: users users@lists.opennebula.org Inviato: Venerdì, 22 agosto 2014 8:26:07 Oggetto: [one-users] Windows Instalaltion Hello, I have a problem when I create a WINDOWS virtual machine from iso in Sunstone .
Re: [one-users] Could not read from CDROM (code 0004)
Hello! I'm new to working with OpenNebula, because when I created the template in Sunstone, I did not think that, by specifying CONTEXT, the system will try to boot the VM using it. And, in my own opinion, forcing CONTEXT be the last CDROM device will eliminate the situation that I have encountered. Best regards, Aleksey Zolotukhin Original Message *Subject: *Re: [one-users] Could not read from CDROM (code 0004) *From: *Daniel Dehennin daniel.dehen...@baby-gnu.org *To: *users@lists.opennebula.org *Date: *21.08.2014 17:49 IBC Service Network / Zolotuhin Aleksey a.zolotu...@ibc.ru writes: Many thanks for the explanation. The problem really was that the VM tried to boot from the context CD. After forcing the bootable CD as hda, everything worked as expected. Hello, That's the reason we force TARGET=hda on all installation ISO, I just can not have two of them used in the same template. Could it be better to force CONTEXT to be last CDROM device? Regards. ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
Re: [one-users] Windows Instalaltion
That's quite strange, I never found it in my installs. May I suggest to check if the install media is not damaged or partially downloaded? The best way is to check its CRC. carlo - Messaggio originale - Da: Maria Jular maria.ju...@fcsc.es A: Carlo Daffara carlo.daff...@cloudweavers.eu Cc: users users@lists.opennebula.org Inviato: Venerdì, 22 agosto 2014 10:28:56 Oggetto: RE: Windows Instalaltion Then... How can I solve the problem? Thank you! María Jular Castañeda Técnico de Sistemas Tfn: +34-987-29 33 23 / e-mail: maria.ju...@fcsc.es http://www.fcsc.es Edificio CRAI-TIC. Campus de Vegazana, s/n. Universidad de León 24071 León Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si Vd. no es el destinatario indicado, queda notificado de que la lectura, utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. El correo electrónico vía Internet no permite asegurar la confidencialidad de los mensajes que se transmiten ni su integridad o correcta recepción. La Fundación Centro de Supercomputación de Castilla y León no asume ninguna responsabilidad por estas circunstancias. This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by a professional privilege or whose disclosure is prohibited by law. If you are not the intended recipient you are hereby notified that any read, dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it. Internet e-mail neither guarantees the confidentiality nor the integrity or proper receipt of the messages sent. Fundación Centro de Supercomputación de Castilla y León does not assume any liability for those circumstances. -Mensaje original- De: Users [mailto:users-boun...@lists.opennebula.org] En nombre de Carlo Daffara Enviado el: viernes, 22 de agosto de 2014 10:02 CC: users Asunto: Re: [one-users] Windows Instalaltion It's not applicable to vmware; regards carlo - Messaggio originale - Da: Maria Jular maria.ju...@fcsc.es A: Carlo Daffara carlo.daff...@cloudweavers.eu Cc: users users@lists.opennebula.org Inviato: Venerdì, 22 agosto 2014 10:02:04 Oggetto: RE: Windows Instalaltion Hello Carlo, I'm using vmware. Will this solution (CACHE=UNSAFE) is valid too? Thank you! María Jular Castañeda Técnico de Sistemas Tfn: +34-987-29 33 23 / e-mail: maria.ju...@fcsc.es http://www.fcsc.es Edificio CRAI-TIC. Campus de Vegazana, s/n. Universidad de León 24071 León Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si Vd. no es el destinatario indicado, queda notificado de que la lectura, utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. El correo electrónico vía Internet no permite asegurar la confidencialidad de los mensajes que se transmiten ni su integridad o correcta recepción. La Fundación Centro de Supercomputación de Castilla y León no asume ninguna responsabilidad por estas circunstancias. This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by a professional privilege or whose disclosure is prohibited by law. If you are not the intended recipient you are hereby notified that any read, dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it. Internet e-mail neither guarantees the confidentiality nor the integrity or proper receipt of the messages sent. Fundación Centro de Supercomputación de Castilla y León does not assume any liability for those circumstances. -Mensaje original- De: Users [mailto:users-boun...@lists.opennebula.org] En nombre de Carlo Daffara Enviado el: viernes, 22 de agosto de 2014 9:12 CC: users Asunto: Re: [one-users] Windows Instalaltion If you use KVM as the hypervisor, there is a known issue where the I/O emulation is substantially slowed by the continuous fsync that the installer performs. The fastest solution is to apply the property CACHE=UNSAFE to the disk where windows is installed, and change it later (either deleting it, using DEFAULT or one of the other cache modes supported by KVM). This will force KVM to ignore the continuous read/write/check that is performed sector by sector and will speed it up substantially the process. Remember to change it later- there is a reason why the mode
Re: [one-users] Could not read from CDROM (code 0004)
IBC Service Network / Zolotuhin Aleksey a.zolotu...@ibc.ru writes: Hello! Hello, And, in my own opinion, forcing CONTEXT be the last CDROM device will eliminate the situation that I have encountered. I just open a request[1]. Regards. Footnotes: [1] http://dev.opennebula.org/issues/3158 -- Daniel Dehennin Récupérer ma clef GPG: gpg --recv-keys 0xCC1E9E5B7A6FE2DF Fingerprint: 3E69 014E 5C23 50E8 9ED6 2AAD CC1E 9E5B 7A6F E2DF signature.asc Description: PGP signature ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
[one-users] Error while hot adding virtio nic model to VM
Hello Everyone, I am getting error while hot plugging virtio nic model to VM One 4.8 Host - Ubuntu 14.04 VM - Windows 2008 R2 (Virtio Drivers already install in the VM) Fri Aug 22 17:22:41 2014 [Z0][VMM][I]: Command execution fail: /var/tmp/one/vmm/kvm/attach_nic 'one-15' '02:00:c0:a8:7a:08' 'virbr0' 'virtio' 'dummy' 15 kvm-node Fri Aug 22 17:22:41 2014 [Z0][VMM][E]: attach_nic: Command virsh --connect qemu:///system attach-device one-15 ( Fri Aug 22 17:22:41 2014 [Z0][VMM][I]: cat EOT Fri Aug 22 17:22:41 2014 [Z0][VMM][I]: interface type='bridge' Fri Aug 22 17:22:41 2014 [Z0][VMM][I]: source bridge='virbr0'/ Fri Aug 22 17:22:41 2014 [Z0][VMM][I]: mac address='02:00:c0:a8:7a:08'/ Fri Aug 22 17:22:41 2014 [Z0][VMM][I]: model type='virtio'/ Fri Aug 22 17:22:41 2014 [Z0][VMM][I]: Fri Aug 22 17:22:41 2014 [Z0][VMM][I]: /interface Fri Aug 22 17:22:41 2014 [Z0][VMM][I]: EOT *Fri Aug 22 17:22:41 2014 [Z0][VMM][I]: ) failed: error: Failed to attach device from /dev/fd/63Fri Aug 22 17:22:41 2014 [Z0][VMM][I]: error: internal error: unable to execute QEMU command 'getfd': No file descriptor supplied via SCM_RIGHTSFri Aug 22 17:22:41 2014 [Z0][VMM][E]: Could not attach () to one-15Fri Aug 22 17:22:41 2014 [Z0][VMM][I]: ExitCode: 1* Fri Aug 22 17:22:41 2014 [Z0][VMM][I]: Failed to execute virtualization driver operation: attach_nic. Fri Aug 22 17:22:41 2014 [Z0][VMM][E]: Error attaching new VM NIC: Could not attach () to one-15 Regards Kiran Ranjane ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
Re: [one-users] OpenNebula Windows Server 2008 R2.
I have checked it and it still does'nt work while hot adding second nic to the VM it does not get the same IP as shown in Sunstone. Regards Kiran Ranjane On Fri, Aug 22, 2014 at 12:20 AM, kiran ranjane kiran.ranj...@gmail.com wrote: If that's the case then this should be added to documentation as a Note I will try it and get back to you on this. Thanks for your help. Regards Kiran Ranjane On Thu, Aug 21, 2014 at 10:25 PM, André Monteiro andremonte...@ua.pt wrote: Absolutely true, that is the way we implemented to avoid script execution on every boot! -- André Monteiro -- *De:* kiran ranjane kiran.ranj...@gmail.com *Enviado:* 21 de agosto de 2014 17:53 *Para:* Javier Fontan *Cc:* André Monteiro; Users OpenNebula *Assunto:* Re: [one-users] OpenNebula Windows Server 2008 R2. Okay, so you mean to say that once the script is copied and executed, I need to remove context.ps1 from context cd? On Thu, Aug 21, 2014 at 10:06 PM, Javier Fontan jfon...@opennebula.org wrote: You have to take into account that the context CD is not regenerated after the VM is created so attached nics can not be automatically configured. On Thu, Aug 21, 2014 at 6:17 PM, kiran ranjane kiran.ranj...@gmail.com wrote: Hello Andre, Windows machine boot fine and I am able to login. Issue is with ip contextualization where the IP is different inside the VM and different in Sunstone. I followed Windows Contextualization 4.8 documentation -- Copied .vbs script to C: and enable it as a startup script. -- Include context.ps1 into the CONTEXT files through Sunstone -- rebooted the VM -- After reboot it did not assign the ip that was displayed in sunstone. -- Then I deleted .opennebula-context and rebooted again and it took correct Ip that was assigned in Sunstone. -- However when I hot added another nic to the VM it did not assign the ip as it was in sunstone instead it took different ip from DHCP. -- I delete the .opennebula-context file and rebooted it again but first nic got correct IP but the second nic did not. Regards Kiran Ranjane On Thu, Aug 21, 2014 at 8:56 PM, André Monteiro andremonte...@ua.pt wrote: Hi Kiran, Can you provide more details on the your problem? I need to know if the problem is the machine not booting, not starting windows or not executing the script. -- André Monteiro De: kiran ranjane kiran.ranj...@gmail.com Enviado: 21 de agosto de 2014 15:55 Para: Javier Fontan Cc: André Monteiro; Users OpenNebula Assunto: Re: [one-users] OpenNebula Windows Server 2008 R2. Hi Javier, I downloaded context from the latest 4.8 version documentation. I tried Linux version both .deb and .rmp on ubuntu and centos and they are working fine but having trouble with windows context. Regards Kiran Ranjane On Thu, Aug 21, 2014 at 7:19 PM, Javier Fontan jfon...@opennebula.org wrote: Which version of the context scripts are you using? I've been using the latest version from the documentation and work OK for me. http://docs.opennebula.org/4.8/user/virtual_machine_setup/windows_context.html On Thu, Aug 21, 2014 at 3:42 PM, kiran ranjane kiran.ranj...@gmail.com wrote: Hello Andre, I am also facing the same issue while contextualization Windows 2008 R2 virtual machine. As said above, first time it does not work and I need to delete .opennebula from c drive and then restart the VM and it works, However if I add second nic interface it does not contextualize even after deleting .opennebula and re-running the the vbs scripts. Windows Version - Windows Server 2008 R2 Enterprise WMI - 6.1.7600.16385 Powershell - 2.0 Regards Kiran Ranjane On Tue, Apr 29, 2014 at 4:19 PM, André Monteiro andremonte...@ua.pt wrote: Hi Leszek, Please send me details about your Windows version, Powershell and WMI, it may be a problem of versions. Executing the file on Powershell ISE returns any error? -- André Monteiro De: Jaime Melis jme...@opennebula.org Enviado: terça-feira, 29 de Abril de 2014 10:45 Para: Leszek Master Cc: Users OpenNebula; André Monteiro Assunto: Re: [one-users] OpenNebula Windows Server 2008 R2. Hi Leszek, apologies with the delay. We've been busy with the release. Does the hostname change with a reboot? Does anyone have expertise changing the windows hostname without a reboot from the powershell CLI? these ares the lines that change the hostname: https://github.com/OpenNebula/addon-context-windows/blob/master/context.ps1#L134 Adding Andé Monteiro, the original author of that line, to the conversation. cheers, Jaime On Wed, Apr 23, 2014 at 4:09 PM, Leszek Master
Re: [one-users] OpenNebula Windows Server 2008 R2.
No, I mean that attached nics are not configured by the context system. You need to do it manually. On Thu, Aug 21, 2014 at 6:53 PM, kiran ranjane kiran.ranj...@gmail.com wrote: Okay, so you mean to say that once the script is copied and executed, I need to remove context.ps1 from context cd? On Thu, Aug 21, 2014 at 10:06 PM, Javier Fontan jfon...@opennebula.org wrote: You have to take into account that the context CD is not regenerated after the VM is created so attached nics can not be automatically configured. On Thu, Aug 21, 2014 at 6:17 PM, kiran ranjane kiran.ranj...@gmail.com wrote: Hello Andre, Windows machine boot fine and I am able to login. Issue is with ip contextualization where the IP is different inside the VM and different in Sunstone. I followed Windows Contextualization 4.8 documentation -- Copied .vbs script to C: and enable it as a startup script. -- Include context.ps1 into the CONTEXT files through Sunstone -- rebooted the VM -- After reboot it did not assign the ip that was displayed in sunstone. -- Then I deleted .opennebula-context and rebooted again and it took correct Ip that was assigned in Sunstone. -- However when I hot added another nic to the VM it did not assign the ip as it was in sunstone instead it took different ip from DHCP. -- I delete the .opennebula-context file and rebooted it again but first nic got correct IP but the second nic did not. Regards Kiran Ranjane On Thu, Aug 21, 2014 at 8:56 PM, André Monteiro andremonte...@ua.pt wrote: Hi Kiran, Can you provide more details on the your problem? I need to know if the problem is the machine not booting, not starting windows or not executing the script. -- André Monteiro De: kiran ranjane kiran.ranj...@gmail.com Enviado: 21 de agosto de 2014 15:55 Para: Javier Fontan Cc: André Monteiro; Users OpenNebula Assunto: Re: [one-users] OpenNebula Windows Server 2008 R2. Hi Javier, I downloaded context from the latest 4.8 version documentation. I tried Linux version both .deb and .rmp on ubuntu and centos and they are working fine but having trouble with windows context. Regards Kiran Ranjane On Thu, Aug 21, 2014 at 7:19 PM, Javier Fontan jfon...@opennebula.org wrote: Which version of the context scripts are you using? I've been using the latest version from the documentation and work OK for me. http://docs.opennebula.org/4.8/user/virtual_machine_setup/windows_context.html On Thu, Aug 21, 2014 at 3:42 PM, kiran ranjane kiran.ranj...@gmail.com wrote: Hello Andre, I am also facing the same issue while contextualization Windows 2008 R2 virtual machine. As said above, first time it does not work and I need to delete .opennebula from c drive and then restart the VM and it works, However if I add second nic interface it does not contextualize even after deleting .opennebula and re-running the the vbs scripts. Windows Version - Windows Server 2008 R2 Enterprise WMI - 6.1.7600.16385 Powershell - 2.0 Regards Kiran Ranjane On Tue, Apr 29, 2014 at 4:19 PM, André Monteiro andremonte...@ua.pt wrote: Hi Leszek, Please send me details about your Windows version, Powershell and WMI, it may be a problem of versions. Executing the file on Powershell ISE returns any error? -- André Monteiro De: Jaime Melis jme...@opennebula.org Enviado: terça-feira, 29 de Abril de 2014 10:45 Para: Leszek Master Cc: Users OpenNebula; André Monteiro Assunto: Re: [one-users] OpenNebula Windows Server 2008 R2. Hi Leszek, apologies with the delay. We've been busy with the release. Does the hostname change with a reboot? Does anyone have expertise changing the windows hostname without a reboot from the powershell CLI? these ares the lines that change the hostname: https://github.com/OpenNebula/addon-context-windows/blob/master/context.ps1#L134 Adding Andé Monteiro, the original author of that line, to the conversation. cheers, Jaime On Wed, Apr 23, 2014 at 4:09 PM, Leszek Master keks...@gmail.com wrote: Also now i see that it do everything beside changing hostname. The Hostname stays unchanged :( 2014-04-23 16:07 GMT+02:00 Leszek Master keks...@gmail.com: I've got VM already contextualized but if i delete .opennebula file from C: and rerun this, it works 100% good. So why it doesn't work in the first time? Any idea how to track this down? Also how to delete the cd-rom permamently after contextualizing my VM? 2014-04-23 16:03 GMT+02:00 Jaime Melis jme...@opennebula.org: Hi Leszek, have you tried running the context.ps1 manually? (inside the
Re: [one-users] OpenNebula Windows Server 2008 R2.
If I use a Virtual router in that case I still need to do it manually? On Fri, Aug 22, 2014 at 5:50 PM, Javier Fontan jfon...@opennebula.org wrote: No, I mean that attached nics are not configured by the context system. You need to do it manually. On Thu, Aug 21, 2014 at 6:53 PM, kiran ranjane kiran.ranj...@gmail.com wrote: Okay, so you mean to say that once the script is copied and executed, I need to remove context.ps1 from context cd? On Thu, Aug 21, 2014 at 10:06 PM, Javier Fontan jfon...@opennebula.org wrote: You have to take into account that the context CD is not regenerated after the VM is created so attached nics can not be automatically configured. On Thu, Aug 21, 2014 at 6:17 PM, kiran ranjane kiran.ranj...@gmail.com wrote: Hello Andre, Windows machine boot fine and I am able to login. Issue is with ip contextualization where the IP is different inside the VM and different in Sunstone. I followed Windows Contextualization 4.8 documentation -- Copied .vbs script to C: and enable it as a startup script. -- Include context.ps1 into the CONTEXT files through Sunstone -- rebooted the VM -- After reboot it did not assign the ip that was displayed in sunstone. -- Then I deleted .opennebula-context and rebooted again and it took correct Ip that was assigned in Sunstone. -- However when I hot added another nic to the VM it did not assign the ip as it was in sunstone instead it took different ip from DHCP. -- I delete the .opennebula-context file and rebooted it again but first nic got correct IP but the second nic did not. Regards Kiran Ranjane On Thu, Aug 21, 2014 at 8:56 PM, André Monteiro andremonte...@ua.pt wrote: Hi Kiran, Can you provide more details on the your problem? I need to know if the problem is the machine not booting, not starting windows or not executing the script. -- André Monteiro De: kiran ranjane kiran.ranj...@gmail.com Enviado: 21 de agosto de 2014 15:55 Para: Javier Fontan Cc: André Monteiro; Users OpenNebula Assunto: Re: [one-users] OpenNebula Windows Server 2008 R2. Hi Javier, I downloaded context from the latest 4.8 version documentation. I tried Linux version both .deb and .rmp on ubuntu and centos and they are working fine but having trouble with windows context. Regards Kiran Ranjane On Thu, Aug 21, 2014 at 7:19 PM, Javier Fontan jfon...@opennebula.org wrote: Which version of the context scripts are you using? I've been using the latest version from the documentation and work OK for me. http://docs.opennebula.org/4.8/user/virtual_machine_setup/windows_context.html On Thu, Aug 21, 2014 at 3:42 PM, kiran ranjane kiran.ranj...@gmail.com wrote: Hello Andre, I am also facing the same issue while contextualization Windows 2008 R2 virtual machine. As said above, first time it does not work and I need to delete .opennebula from c drive and then restart the VM and it works, However if I add second nic interface it does not contextualize even after deleting .opennebula and re-running the the vbs scripts. Windows Version - Windows Server 2008 R2 Enterprise WMI - 6.1.7600.16385 Powershell - 2.0 Regards Kiran Ranjane On Tue, Apr 29, 2014 at 4:19 PM, André Monteiro andremonte...@ua.pt wrote: Hi Leszek, Please send me details about your Windows version, Powershell and WMI, it may be a problem of versions. Executing the file on Powershell ISE returns any error? -- André Monteiro De: Jaime Melis jme...@opennebula.org Enviado: terça-feira, 29 de Abril de 2014 10:45 Para: Leszek Master Cc: Users OpenNebula; André Monteiro Assunto: Re: [one-users] OpenNebula Windows Server 2008 R2. Hi Leszek, apologies with the delay. We've been busy with the release. Does the hostname change with a reboot? Does anyone have expertise changing the windows hostname without a reboot from the powershell CLI? these ares the lines that change the hostname: https://github.com/OpenNebula/addon-context-windows/blob/master/context.ps1#L134 Adding Andé Monteiro, the original author of that line, to the conversation. cheers, Jaime On Wed, Apr 23, 2014 at 4:09 PM, Leszek Master keks...@gmail.com wrote: Also now i see that it do everything beside changing hostname. The Hostname stays unchanged :( 2014-04-23 16:07 GMT+02:00 Leszek Master keks...@gmail.com: I've got VM already contextualized but if i delete .opennebula file from C: and rerun this, it
[one-users] VMs stuck in pending
Hey all, I've been scratching my head against this one for a while, all my VMs are stuck in a pending mode. I checked sched.log to see why and got this: Fri Aug 22 15:20:47 2014 [VM][D]: Pending/rescheduling VM and capacity requirements: VM CPU Memory System DS Image DS 418 10 1048576 236 DS 100: 20 DS 101: 0 419 10 1048576 236 DS 100: 20 DS 101: 0 Fri Aug 22 15:20:47 2014 [HOST][D]: Discovered Hosts (enabled): 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 246 247 248 249 250 251 252 253 254 255 256 259 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 316 317 318 319 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 Fri Aug 22 15:20:47 2014 [SCHED][I]: VM 418: Image Datastore 100 does not have enough free storage. Fri Aug 22 15:20:47 2014 [SCHED][I]: VM 419: Image Datastore 100 does not have enough free storage. Fri Aug 22 15:20:47 2014 [SCHED][I]: Scheduling Results: This is the datastore in question that it's failing on one-master:~$ onedatastore show 100 DATASTORE 100 INFORMATION ID : 100 NAME : qcow2ssh USER : oneadmin GROUP : oneadmin CLUSTER: - TYPE : IMAGE DS_MAD : fs TM_MAD : qcow2ssh BASE PATH : /var/lib/one//datastores/100 DISK_TYPE : FILE DATASTORE CAPACITY TOTAL: : 233.7G FREE: : 119.6G USED: : 2.4G LIMIT: : - PERMISSIONS OWNER : uma GROUP : u-- OTHER : u-- DATASTORE TEMPLATE CLONE_TARGET=SELF DISK_TYPE=FILE DS_MAD=fs LN_TARGET=NONE TM_MAD=qcow2ssh IMAGES 4 11 13 15 I checked VirtualMachineXML.cc and noticed it looped through all datastores to determine if there was enough capacity. If the virtual machine isn't being deployed to an image datastore, why does it check the capacity, and subsequently cause my vm not to be deployed? Manually deploying using onevm deploy works just fine. Thanks, Simon ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
[one-users] Opennebula 4.8 Create VM
Hi. The Create Virtual Machine window does not render properly on Google chrome on Red Hat. I have included a screen capture of the window. The same window renders correctly on Firefox and on Google Chrome on Windows. Thanks, Lorraine [Screenshot.png] ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
[one-users] why VM on slave zone is shutdown itself?
All, I wonder if anyone experienced the same weird error -- VMs shutdown themselves? (in my environment, after running about 2 minutes) The VMs from same template/image run well on master zone. Anyone has any ideas? Log from sunstone console. (other logs are clean) Fri Aug 22 14:56:12 2014 [Z100][DiM][I]: New VM state is ACTIVE. Fri Aug 22 14:56:12 2014 [Z100][LCM][I]: New VM state is PROLOG. Fri Aug 22 14:56:32 2014 [Z100][LCM][I]: New VM state is BOOT Fri Aug 22 14:56:32 2014 [Z100][VMM][I]: Generating deployment file: /var/lib/one/vms/6/deployment.0 Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: ExitCode: 0 Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: Successfully execute network driver operation: pre. Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: ExitCode: 0 Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: Successfully execute virtualization driver operation: deploy. Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: ExitCode: 0 Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: Successfully execute network driver operation: post. Fri Aug 22 14:56:42 2014 [Z100][LCM][I]: New VM state is RUNNING Fri Aug 22 14:58:36 2014 [Z100][DiM][I]: New VM state is POWEROFF Thanks, Gene ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
Re: [one-users] why VM on slave zone is shutdown itself?
Sorry that I missed some important information: OpenNebula 4.8 Nodes and frontend server are all RHEL7.0 Hypervisor: KVM Thanks, Gene On 14-08-22 03:13 PM, Liu, Gene wrote: All, I wonder if anyone experienced the same weird error -- VMs shutdown themselves? (in my environment, after running about 2 minutes) The VMs from same template/image run well on master zone. Anyone has any ideas? Log from sunstone console. (other logs are clean) Fri Aug 22 14:56:12 2014 [Z100][DiM][I]: New VM state is ACTIVE. Fri Aug 22 14:56:12 2014 [Z100][LCM][I]: New VM state is PROLOG. Fri Aug 22 14:56:32 2014 [Z100][LCM][I]: New VM state is BOOT Fri Aug 22 14:56:32 2014 [Z100][VMM][I]: Generating deployment file: /var/lib/one/vms/6/deployment.0 Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: ExitCode: 0 Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: Successfully execute network driver operation: pre. Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: ExitCode: 0 Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: Successfully execute virtualization driver operation: deploy. Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: ExitCode: 0 Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: Successfully execute network driver operation: post. Fri Aug 22 14:56:42 2014 [Z100][LCM][I]: New VM state is RUNNING Fri Aug 22 14:58:36 2014 [Z100][DiM][I]: New VM state is POWEROFF Thanks, Gene ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
Re: [one-users] why VM on slave zone is shutdown itself?
I just found that these VMs are running still on the nodes. Its weird that OpenNebula changed their status to POWEROFF Sounds like bug of OpenNebula? --- [root@node2 ~]# virsh list IdName State 5 one-7 running On 14-08-22 03:16 PM, Liu, Gene wrote: Sorry that I missed some important information: OpenNebula 4.8 Nodes and frontend server are all RHEL7.0 Hypervisor: KVM Thanks, Gene On 14-08-22 03:13 PM, Liu, Gene wrote: All, I wonder if anyone experienced the same weird error -- VMs shutdown themselves? (in my environment, after running about 2 minutes) The VMs from same template/image run well on master zone. Anyone has any ideas? Log from sunstone console. (other logs are clean) Fri Aug 22 14:56:12 2014 [Z100][DiM][I]: New VM state is ACTIVE. Fri Aug 22 14:56:12 2014 [Z100][LCM][I]: New VM state is PROLOG. Fri Aug 22 14:56:32 2014 [Z100][LCM][I]: New VM state is BOOT Fri Aug 22 14:56:32 2014 [Z100][VMM][I]: Generating deployment file: /var/lib/one/vms/6/deployment.0 Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: ExitCode: 0 Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: Successfully execute network driver operation: pre. Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: ExitCode: 0 Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: Successfully execute virtualization driver operation: deploy. Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: ExitCode: 0 Fri Aug 22 14:56:42 2014 [Z100][VMM][I]: Successfully execute network driver operation: post. Fri Aug 22 14:56:42 2014 [Z100][LCM][I]: New VM state is RUNNING Fri Aug 22 14:58:36 2014 [Z100][DiM][I]: New VM state is POWEROFF Thanks, Gene ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
Re: [one-users] Automatic recover from hardware failure
Sander, See https://github.com/dignus/one/commit/02a5a65eae48d58edaa414af94802bc74e5b1e24 for the fix you can apply yourself before 4.8.1 is released. On Thu, Aug 14, 2014 at 8:36 PM, Sander Klein roe...@roedie.nl wrote: Hi, On 14.08.2014 16:20, Carlos Martín Sánchez wrote: Hi, On Thu, Aug 14, 2014 at 1:07 PM, Johan Kooijman m...@johankooijman.com wrote: Hi all, I'm almost finished setting up the POC for ONE so far. One last piece I can't really figure out is how to recreate VM's on a different host in case a host fails, like hardware off the grid. How would I do such a thing? You can enable the fault tolerance hook in oned.conf [1]. This hook will perform the onevm delete --recreate action on the VMs of the failed host. To avoid false positives because of network connectivity issues, use the -p flag of the hook. The delete-recreate action will create a new VM from the original template. This means that the VM will have a new ID, IP, and clean disks. We are working on a new mechanism for hosts with shared storage, to migrate the failed VM to a new host keeping the current IPs, disk state, etc. Is there an ETA on this new mechanism? I just ran into the same problem today in my test setup. Greets, Sander -- Met vriendelijke groeten / With kind regards, Johan Kooijman ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
[one-users] SSL proxy
Hi all, I've installed an nginx proxy for SSL offloading in front of Sunstone. All works fine, except for opening a console. When clicking VNC, a small icon appears in my Chrome URL bar telling me I'm trying to load unsafe scripts. Javascript console tells me: [blocked] The page at 'https://theonepoc.cloud.nl/' was loaded over HTTPS, but ran insecure content from 'ws://localhost:17523/': this content should also be loaded over HTTPS. When I tick the VNC Secure websockets option in my user profile, I don't get that message, but the VNC layer displays VNC Server disconnected (code: 1006) immediatly. Is there something wrong with my setup? Or did I miss something? -- Met vriendelijke groeten / With kind regards, Johan Kooijman ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
Re: [one-users] SSL proxy
As a follow up: the connection can be made, telnet works. Firefox tells me: GET https://theonepoc.cloud.nl:29876/ [HTTP/1.0 403 Forbidden 35ms] New state 'loaded', was 'disconnected'. Msg: noVNC ready: native WebSockets, canvas rendering util.js:110 New state 'connect', was 'loaded'. util.js:110 Skipping unsupported WebSocket binary sub-protocol util.js:111 Firefox can't establish a connection to the server at wss:// theonepoc.cloud.nl:29876/?token=xbw7pps1nuzhxz5b9nds. websock.js:333 WebSocket on-error event util.js:110 WebSocket on-close event util.js:110 New state 'failed', was 'connect'. Msg: Server disconnected (code: 1006) util.js:111 New state 'disconnected', was 'failed'. util.js:110 New state 'disconnect', was 'failed'. Msg: Disconnecting util.js:110 New state 'failed', was 'disconnect'. Msg: Disconnect timeout util.js:111 New state 'disconnected', was 'failed'. On Fri, Aug 22, 2014 at 11:13 PM, Johan Kooijman m...@johankooijman.com wrote: Hi all, I've installed an nginx proxy for SSL offloading in front of Sunstone. All works fine, except for opening a console. When clicking VNC, a small icon appears in my Chrome URL bar telling me I'm trying to load unsafe scripts. Javascript console tells me: [blocked] The page at 'https://theonepoc.cloud.nl/' was loaded over HTTPS, but ran insecure content from 'ws://localhost:17523/': this content should also be loaded over HTTPS. When I tick the VNC Secure websockets option in my user profile, I don't get that message, but the VNC layer displays VNC Server disconnected (code: 1006) immediatly. Is there something wrong with my setup? Or did I miss something? -- Met vriendelijke groeten / With kind regards, Johan Kooijman -- Met vriendelijke groeten / With kind regards, Johan Kooijman ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org
Re: [one-users] SSL proxy
Johan Kooijman m...@johankooijman.com writes: As a follow up: the connection can be made, telnet works. Firefox tells me: GET https://theonepoc.cloud.nl:29876/ [HTTP/1.0 403 Forbidden 35ms] New state 'loaded', was 'disconnected'. Msg: noVNC ready: native WebSockets, canvas rendering util.js:110 New state 'connect', was 'loaded'. util.js:110 Skipping unsupported WebSocket binary sub-protocol util.js:111 Firefox can't establish a connection to the server at wss:// theonepoc.cloud.nl:29876/?token=xbw7pps1nuzhxz5b9nds. websock.js:333 As far as I understand, theonepoc.cloud.nl:29876 is not managed by nginx but by the python-websocket, nginx just serve the javascript code which open the WSS connection. Maybe with nginx support[1] you can reverse proxy the WebSocket: 1) make python-websocket listen on 127.0.0.1 only 2) configure nginx to listen on theonepoc.cloud.nl:29876 with SSL and proxy_pass it to python-websocket on 127.0.0.1 I do not test it, but a simpler approach could be to configure wss in /etc/one/sunstone-server.conf to use the same certificate and key than nginx? Regards. Footnotes: [1] http://nginx.org/en/docs/http/websocket.html -- Daniel Dehennin Récupérer ma clef GPG: gpg --recv-keys 0xCC1E9E5B7A6FE2DF Fingerprint: 3E69 014E 5C23 50E8 9ED6 2AAD CC1E 9E5B 7A6F E2DF signature.asc Description: PGP signature ___ Users mailing list Users@lists.opennebula.org http://lists.opennebula.org/listinfo.cgi/users-opennebula.org