Hello,
I'm digging this thread up because I just found out the reason why this
could be happening. Apparently RHEL/CentOS doesn't have support for scsi
drivers in its kvm version. I suggest you use this device prefix: vd
(virtio) and try again.
cheers,
Jaime
On Tue, Nov 27, 2012 at 6:55 PM, jd
I think I was wrong with DRIVER=raw. The correct driver should be
file. Ca you try again with that type?
Can you also send me the disk.x.attach file generated if it still
gives you trouble?
On Tue, Nov 27, 2012 at 6:55 PM, jd daniel ch juni...@gmail.com wrote:
Hello Javier,
I followed your
Hello Javier,
I followed your recommendation BUT still I got the same error. Is there any
way to address the issue? I haven't upgraded to 3.8.1 still using 3.6 yet.
Regards,
Junix
On Mon, Nov 26, 2012 at 4:54 AM, Javier Fontan jfon...@opennebula.orgwrote:
I can not reproduce this problem in
I can not reproduce this problem in 3.8.1. Try to add DRIVER=raw to
the image before attaching it.
2012/11/24 jd daniel ch juni...@gmail.com:
Hello there,
Scenario: OpenNebula 3.6+CentOS 6.3x86_64bit
Issues: When I attached Disk (Type: Existing Image; Device prefix: sd) on my
VM. Image
Hello there,
Scenario: OpenNebula 3.6+CentOS 6.3x86_64bit
Issues: When I attached Disk (Type: Existing Image; Device prefix: sd) on
my VM. Image created dev prefix is sd, target is sdb.
Error log below when I attached the disk -
*Fri Nov 23 16:54:50 2012 [VMM][I]: Successfully execute transfer
