I don’t know, but from what you say, it sounds like a page thing, not
opensips. Check the web page
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Sun, 17 Mar 2024 at 14:19, Prathibha B wrote:
> This happens once in a minutes. Once a min
Timeout? If so then
https://opensips.org/html/docs/modules/2.3.x/tm.html#fr_timeout
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Sun, 24 Dec 2023 at 10:15, Prathibha B wrote:
> How to increase the ringing time?
>
> Sent from Outlook fo
And what do you mean by “opensips creates a new invite as the caller sent”?
On Mon, 13 Nov 2023 at 08:57, Bogdan-Andrei Iancu
wrote:
> Hi,
>
> May I ask why using the "B" flag here ?
>
> Regards,
>
> Bogdan-Andrei Iancu
>
> OpenSIPS Founder and Developer
> https://www.opensips-solutions.com
>
Make you opensips finds a next hope. This usually happens when no next hope
is set and opensips forwards to itself.
On Sat, 23 Sep 2023 at 07:59, Prathibha B wrote:
> While executing opensips using sipml5, I'm getting Too Mnay Hops error.
> This occurs when I am using ip address instead of
damn... it seems there's a new law in France to do stir/shaken...
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Wed, Sep 6, 2023 at 2:38 PM Mickael Hubert wrote:
> We are deploying it in France.
> In France on providers interconnections, we c
Is ST/SH being used other than the US? AFAIK it only applies to US numbers,
thus 10 digits, no?
On Wed, 6 Sep 2023 at 14:27, Mickael Hubert wrote:
> yep I found...
>
> if (end - start < 2 || end - start > 15)
> return -1;
>
> I have to modify this code.
> I will propose a PR.
>
> Thanks a lot
>
ips.org/cgi-bin/mailman/listinfo/users;> <
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users;> <
> http://lists.opensips.org/cgi-bin/mailman/listinfo/usersgt;;>
> >
> >
> > ___
> > Users mailing list
> > Users
lid identity header.
>
> When I remove or replace "ca_list" file with something bogus opensips
> does not even start with errors:
>
> ERROR:stir_shaken:init_cert_validation: Failed to load trustefd CAs
> ERROR:core:init_mod: failed to initialize module stir_shaken
PS Founder and Developer
> https://www.opensips-solutions.com
> OpenSIPS Bootcamp 5-16 Dec 2022, online
> https://www.opensips.org/training/OpenSIPS_eBootcamp_2022/
>
> On 1/5/23 11:47 AM, David Villasmil wrote:
>
> No, that’s the thing. I want to be able to change them without
Hello folks,
Is there such a thing? cfgutils seems to be an alternative, but looks like
too much for such a simple thing.
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
___
Users mailing list
Users
gt;>>
> >>> Please Help Team :)
> >>>
> >>> Kind Regards,
> >>> Terrance
> >>
> >> ___
> >> Users mailing list
> >> Users@lists.opensips.org
> >> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> >
>
c4
>
>
> On Wed, Dec 21, 2022 at 9:14 AM David Villasmil <
> david.villasmil.w...@gmail.com> wrote:
>
>> Hello folks,
>>
>> I'm trying to find in opensips an equivalent to kamailio's htable module.
>> Opensips' cachedb_local doesn't have autoexpires...
>
Hello folks,
I'm trying to find in opensips an equivalent to kamailio's htable module.
Opensips' cachedb_local doesn't have autoexpires...
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
___
Users mailing list
Users
s, we receive the "401 Unauthorized" message from that server. But
> when UAC sends the INVITE with the authorization, the LB-module sends it to
> another Asterisk. Sometimes it happens multiple times.
> >>>>>
> >>>>>
> >>>>> Than
Hello Callum,
Can you share how you are doing late negotiation?
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Wed, May 15, 2019 at 6:37 PM Callum Guy wrote:
> Hi All,
>
> I am working on a problem where for a few destinations my
ough each
> gateway of each carrier in order, unless the flag Bogdan referenced below
> is set.
>
>
>
> Ben Newlin
>
>
>
> *From: *Users on behalf of
> Bogdan-Andrei Iancu
> *Date: *Tuesday, September 6, 2022 at 10:06 AM
> *To: *OpenSIPS users mailling list , Dav
Is there anything like “use_next_carrier”? I.e.: decide when I want to stop
trying gws for the current carrier.
On Tue, 6 Sep 2022 at 18:04, David Villasmil
wrote:
> I may not have been clear, I want to try the first _two_ (2) gws for each
> carrier.
>
> Is this possible?
>
>
Hello folks,
I'm trying to route to the first provider and if the first gw attempted
fails, try the next gw on that provider, and if that fails THEN failover to
the next provider. NOTE ALL PROVIDERS CAN HAVE MULTIPLE gws.
Is this possible on 2.4.7?
I really appreciate your help!
David
ot;ds_probing_threshhold", 1)
>
> modparam("dispatcher", "persistent_state", 0)
>
> modparam("dispatcher", "ds_ping_interval", 5)
>
> modparam("dispatcher", "table_name", "dispatcher")
>
> modparam("
Hello folks,
It's been a while since i've worked with OpenSIPS, and I'm seeing a script
using
$var(addPrefix) = $param(1);
I don't really know what that $param does, can anyone help me out here?
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
t; Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
--
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
___
Users mailing list
Users@lists.opensips.org
htt
per
> https://www.opensips-solutions.com
> OpenSIPS eBootcamp 2021
> https://opensips.org/training/OpenSIPS_eBootcamp_2021/
>
> On 11/26/21 3:48 AM, David Villasmil wrote:
>
> Hello folks,
>
> I'm facing this issue on this scenario:
>
> [ 1] USER---INVITE---
https://www.opensips.org/Documentation/Script-Tran-2-4#toc60
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Mon, Nov 29, 2021 at 12:22 PM Mickael MONSIEUR <
mickael.monsi...@gmail.com> wrote:
> Hello,
>
> My provider add to my INVITE's :
Hello folks,
So, the way the script is, it's adding a record_route() before doing the
STSH stuff, and that's adding that route for the rest of the flow...
I wonder if there's any way of removing it.
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Fri, Nov
OPENSIPS<-- ACK
This only happens when I enable that STIR/SHAKEN functionality and use the
302, when OpenSIPS sends out the INVITE [
The 200 OK has this as a record route:
Record-Route:
what do i need to do to remove those duplicated record-routes after
receiving the 302?
ator if you have
> received it in error.
>
> *Caution for viruses, malware etc.*
> This communication, including any attachments, may not be free of viruses,
> trojans, similar or new contaminants/malware, interceptions or
> interference,
;
>
>
> ___
> Users mailing
> listUsers@lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
>
> ___
> Users mailing list
> Users@lists.opensips.org
> http:
Thanks again Ben,
I'm still not understanding: Setting it to (as is, nothing)
would then only send to the first gw, and only to the second on failure?
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Wed, Nov 10, 2021 at 2:06 PM Ben Newlin wrote:
>
Sorry,
it's defined in cr_carriers, that's the list of gws which are then defined
on dr_gateways.
The "flags" field is "1", which i take to mean weight-based (this is
opensips 2.4)
So i would need to set the flags to "2"?
Regards,
David Villasmil
email: david.
Hello folks,
i have the following gw_list
PrimaryGW=100,SecondaryGW=10
I'm seeing calls going to the SecondaryGW.
How should i set this if i only want the SecondaryGW to be used for
failover?
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
or is there a more efficient/easier way to do it?
Thanks!
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Tue, Jun 15, 2021 at 12:10 AM David Villasmil <
david.villasmil.w...@gmail.com> wrote:
> Thanks Jeff,
>
> That's not going to work for
Thanks Jeff,
That's not going to work for me, I don't want to add new branches.
What I'm doing is forwarding the call to a sip server that replies with a
302 and some extra headers.
I then need to get these headers and continue routing normally, one single
branch.
Regards,
David Villasmil
email
Hello guys,
So, I'm appending a header (append_hf("header")) to a forward.
That forward fails and I'm trying to remove it with remove_hf("header"),
but it's not getting removed for some reason, what am I doing wrong?
Thanks everyone!
David Villasmil
email: david.villasmil.
just check $(hdr(X-MyHeader))
is not $null?
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Thu, Jun 3, 2021 at 2:27 PM David Villasmil <
david.villasmil.w...@gmail.com> wrote:
> Thanks Ben,
>
> I understand now. Perfect.
>
> David
>
Thanks Ovidiu, that was it! Didn't register one was a bitmask and the other
the position.
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Thu, Jun 10, 2021 at 2:11 AM Ovidiu Sas wrote:
> Read the docs.
> In the script, the argument is the po
Point is on the CLI I get TRUE, but on the script no matter what I do it is
always false
On Thu, 10 Jun 2021 at 01:51, David Villasmil <
david.villasmil.w...@gmail.com> wrote:
> Thanks Ben, I tried both :(
>
> On Thu, 10 Jun 2021 at 01:26, Ben Newlin wrote:
>
>>
//opensips.org/docs/modules/2.4.x/gflags.html#exported_mi_functions
>
>
>
> Ben Newlin
>
>
>
> *From: *Users on behalf of David
> Villasmil
> *Date: *Wednesday, June 9, 2021 at 6:34 PM
> *To: *users@lists.opensips.org
> *Subject: *Re: [OpenSIPS-Users] Set flag
t;
TRUE
But no matter what i do, the script always sees the flag as not set.
Did I misunderstand the purpose of the module? I want to be able to set the
flag dynamically from the CLI to enable/disable a feature at runtime... is
this not possible?
thanks guys.
Regards,
David Villasmil
email: david.vil
gflags!
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Wed, Jun 9, 2021 at 5:05 PM David Villasmil <
david.villasmil.w...@gmail.com> wrote:
> Hello guys,
>
> On 2.4 is it possible to set a flag at runtime? I want to set a feature
Hello guys,
On 2.4 is it possible to set a flag at runtime? I want to set a feature
toggle based on that.
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
___
Users mailing list
Users@lists.opensips.org
http
>
>
>
> Ben Newlin
>
>
>
> *From: *Users on behalf of David
> Villasmil
> *Date: *Thursday, June 3, 2021 at 8:10 AM
> *To: *OpenSIPS users mailling list
> *Subject: *Re: [OpenSIPS-Users] Getting header from 302
>
> Oh I didn’t register that p
gt; reply route and do everything else in the failure route. Or, try Liviu's
> suggestion of using $(hdr(Identity)) in the failure_route directly.
> Either way, then continue in the failure_route to do whatever else needs to
> happen.
>
>
> - Jeff
>
>
>
> On Wed, J
normally
if (t_check_status("302") && is_present_hf("myheader")) {
$avp(identity_header) = $(hdr(myheader));
setflag(100);
drop();
}
}
So I suppose i don't need the drop()?
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
lling list
> *Subject: *Re: [OpenSIPS-Users] Getting header from 302
>
> Oh! Understood.
>
>
>
>
>
> - Jeff
>
>
>
>
>
> On Tue, Jun 1, 2021 at 2:42 PM David Villasmil <
> david.villasmil.w...@gmail.com> wrote:
>
> The thing is I _want_
The thing is I _want_ to drop the 302, I don't want to do anything else
with it.
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Tue, Jun 1, 2021 at 6:46 PM Jeff Pyle wrote:
> In my experience you don't need drop() in the reply route. Just st
lag and then drop(). I noticed the "failure" route is then executed.
>From there I can send the processing to the invite route and by checking
the flag, adding the header from the avp.
Thanks for your help!
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669
with 302 including a header.
- I want to grab that header and continue routing normally (do_routing)
I could do that with the failure route, but not so sure about the onreply
route.
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Tue, Jun 1, 2021 at 2:34 PM
ither the armed onreply_route or failure_route.
>
> I think From is available because it was present in the original request
> route.
>
>
> - Jeff
>
> On Tue, Jun 1, 2021 at 5:39 AM David Villasmil <
> david.villasmil.w...@gmail.com> wrote:
>
>> Anyone h
Anyone has any idea about this? Appreciate your help.
On Mon, 31 May 2021 at 21:11, David Villasmil <
david.villasmil.w...@gmail.com> wrote:
> So weird,
> I can get the From header, but not "Identity"...
>
> Regards,
>
> David Villasmil
> email: d
So weird,
I can get the From header, but not "Identity"...
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Mon, May 31, 2021 at 8:22 PM David Villasmil <
david.villasmil.w...@gmail.com> wrote:
> This is really weird,
>
> if
This is really weird,
if (is_present_hf("Identity"))
says it is not present, but it is!
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Mon, May 31, 2021 at 7:47 PM David Villasmil <
david.villasmil.w...@gmail.com> wrote:
> Hello Gu
)
Content-Length: 0
I'm trying to get the "Identity" header with:
$avp(identity_header) = $(hdr(Identity));
But It's coming up
Any ideas of what I'm doing wrong?
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
_
>
>
> - Jeff
>
> On Tue, May 25, 2021 at 5:12 PM David Villasmil <
> david.villasmil.w...@gmail.com> wrote:
>
>> Hello guys,
>>
>> I'm receiving an INVITE which I forward to a redirect server. When this
>> redirect server's response is not what
is not what I need, how can I continue processing the call
normally? i.e. using do_routing.
Thanks all,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org
Hello Rafael,
You might want to start by installing Opensips and going through the
quick-start:
https://www.opensips.org/Documentation/Tutorials-GettingStarted
Once you've done that, and gone through the configuration file, you can ask
more pointed questions.
Regards,
David Villasmil
email
___
>> Users mailing list
>> Users@lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>> _______
>> Users mailing list
_
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
--
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
t; Liviu Chircu
>
>
> > www.twitter.com/liviuchircu |
>
> www.opensips-solutions.com
>
>
> >
>
>
> >
>
>
> > ___
>
>
> > Users mailing list
>
>
> > Users@lists.opensips.org
>
>
> >
>
>
> https://protect-us.mimecast.com/s/QQVvCJ67Pkiknr58cGCME1?domain=lists.opensips.org
> <http://lists.opensips.org/cgi-bin/mailman/listinfo/users>
>
>
>
>
>
>
>
>
>
>
>
>
>
> --
>
>
> VoIP Embedded, Inc.
>
>
> http://www.voipembedded.com
>
>
>
>
>
> ___
>
>
> Users mailing list
>
>
> Users@lists.opensips.org
>
>
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
>
>
>
>
>
>
>
>
>
> ___
>
> Users mailing list
>
> Users@lists.opensips.org
>
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
> --
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
There's a lot of info here which applies to everything, really.
https://freeswitch.org/confluence/display/FREESWITCH/Performance+Testing+and+Configurations
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Tue, Sep 22, 2020 at 3:36 PM Kirill Galinurov
n,
>> 212992 is the default--at least, it is on all my CentOS 7.x and 8.x
>>
>> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
&
___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
--
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
You could use
https://opensips.org/html/docs/modules/1.7.x/avpops.html#id293960
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Thu, Jun 11, 2020 at 12:07 PM Mark Farmer wrote:
> Hmm... Doesn't seem to exist in OpenSIPS.
>
> How do others do
>> Users mailing list
>> Users@lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>
>
> --
> Mark Farmer
> farm...@gmail.com
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
--
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
er.com/liviuchircu | www.opensips-solutions.com
>
>
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
--
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
ph
No idea, but can always check with any of several utilities, I.e.: netstat
On Fri, 5 Jun 2020 at 01:37, Calvin Ellison
wrote:
> On Thu, Jun 4, 2020 at 5:18 PM David Villasmil
> wrote:
> >
> > Maybe you are hitting the max connections? How many connections are
> there w
will chew up available
> computation cycles.
>
> Both opensips servers and the database have plenty of free memory. How
> do I know how much shared and process memory to use? I see warnings
> about the reactor size shrinking to a percentage of the process memory
> but have no idea w
or opinions expressed by an individual
> within this email may not necessarily reflect the views of X-on or its
> associated companies. Although X-on routinely screens for viruses,
> addressees should scan this email and any attachments
> for viruses. X-on makes no representation or warranty as to the absence of
> viruses i
ari
>
>
> On Saturday, May 2, 2020, 4:54:01 PM GMT+4:30, David Villasmil <
> david.villasmil.w...@gmail.com> wrote:
>
>
> Hello,
>
> I have never run into those problems. The people I’ve seen running into
> them are doing thousands upon thousands of packets por seco
with projects like Freepbx.
>
>
> Regards,
> HY
>
>
>
> On Saturday, May 2, 2020, 3:48:11 PM GMT+4:30, David Villasmil <
> david.villasmil.w...@gmail.com> wrote:
>
>
> Not sure about OpenSIPS specifically, but I would assume it has been
> implemented in docke
s.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
--
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
Have you tried with 1 or 0?
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Wed, Apr 15, 2020 at 12:09 AM Saint Michael wrote:
> what is the lowest debug level that is safe to use?
>
>
> On Tue, Apr 14, 2020 at 6:59 PM Dav
.100:5060'/52, caller
> tag='as480e6ada'/10, callee tag='KSQ5DeD148vBD'/13
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
--
Regards,
David Villasmil
email: david
I just made a fresh install on a docker and indeed siptrace is not there...
going to compile it
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Tue, Apr 7, 2020 at 10:41 AM David Villasmil <
david.villasmil.w...@gmail.com> wrote:
> or install?
&g
or install?
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Tue, Apr 7, 2020 at 10:39 AM David Villasmil <
david.villasmil.w...@gmail.com> wrote:
> did you compile sipcapture?
>
> Regards,
>
> David Villasmil
> email: david.
did you compile sipcapture?
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Tue, Apr 7, 2020 at 10:32 AM Aleksandar Sosic wrote:
> Hi Guys,
>
> I'm installing Opensips v3.0 via `deb http://apt.opensips.org buster
> 3.0-releases` with:
>
this is where the advertised address is set
https://github.com/OpenSIPS/opensips/blob/628a126fe3523e800440855f10f9841d6a2c39eb/cfg.y#L2373
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Mon, Apr 6, 2020 at 4:12 PM David Villasmil <
david.villasmi
i only see $rd which is the domain to which the sip message was sent, it
"should" have the advertised ip, or de actual domain, in which case if you
need the actual ip, it is useless
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Mon, Apr 6, 2020
see no reference to the same variable in OpenSIPS.
>
> https://www.opensips.org/Documentation/Script-CoreVar-2-4
>
> Am I missing something?
>
>
> On Mon, 6 Apr 2020 at 13:45, David Villasmil <
> david.villasmil.w...@gmail.com> wrote:
>
>> Right here:
>>
>
Right here:
https://www.kamailio.org/wiki/cookbooks/5.2.x/pseudovariables#rai_-_received_advertised_ip_address
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
On Mon, Apr 6, 2020 at 12:08 PM Mark Farmer wrote:
> Many thanks for the reply.
>
if (lookup("location","m")) {
> lb_disable_dst();
> route(relay);
> exit;
> }
> }
>
> thanks in advance,
>
> michael.
>
>
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
--
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
BYE,
> CANCEL, UPDATE, PRACK, REFER
> Reason: Q.850;cause=1
> Content-Length: 0
>
> And at this point Server A can match this reply and responds with an ACK:
>
> ACK sip:X@B.B.B.B SIP/2.0
> Via: SIP/2.0/UDP A.A.A.A:5060;rport;branch=z9hG4bK773616538
> From: &
www.opensips-solutions.com
>
> OpenSIPS Summit, Amsterdam, May 2020
>www.opensips.org/events
>
>
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
--
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
/listinfo/users
>>
>>
>>
>> ___
>> Users mailing
>> listUsers@lists.opensips.orghttp://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
>>
>> ___
>> Users mailing list
>> Users@lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
--
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
t;
> On Mon, Mar 9, 2020 at 12:31 PM David Villasmil <
> david.villasmil.w...@gmail.com> wrote:
>
>> Make sure you don’t have 2 contacts
>>
>> On Sun, 8 Mar 2020 at 23:22, Jehanzaib Younis
>> wrote:
>>
>>> but i have strange issue.
>>> nat
d and Wales.
>>>>> Registered Office : Avaland House, 110 London Road, Apsley, Hemel
>>>>> Hempstead, Herts, HP3 9SD
>>>>> <https://www.google.com/maps/search/110+London+Road,+Apsley,+Hemel+Hempstead,%0D%0AHerts,+HP3+9SD?entry=gmail=g>.
>>>>> Company Reg
fied.”
>
>
>
> Ben Newlin
>
>
>
> *From: *Users on behalf of David
> Villasmil
> *Reply-To: *OpenSIPS users mailling list
> *Date: *Monday, March 2, 2020 at 1:40 PM
> *To: *OpenSIPS users mailling list
> *Subject: *Re: [OpenSIPS-Users] ratelimit network algo
t; >> On Mon, 2 Mar 2020 at 16:19, Jeff Pyle wrote:
> >>>
> >>> This doesn't appear to have anything to do with a any type of limit or
> the network algorithm. In fact, it says, "...and only affects the Taildrop
> and RED algorithms." ?
> >>>
at 16:19, Jeff Pyle wrote:
> This doesn't appear to have anything to do with a any type of limit or the
> network algorithm. In fact, it says, "...and only affects the Taildrop and
> RED algorithms." ?
>
>
> - Jeff
>
>
> On Mon, Mar 2, 2020 at 11:05 AM David
odparam, rl_check
> returns an error." The problem is I don't see a modparam to define the
> limit.
>
>
>
> - Jeff
>
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailm
Not sure, try with \\n instead of \n
On Sun, 1 Mar 2020 at 12:08, Saint Michael wrote:
> Could you post an example? I have no idea?
>
> On Sun, Mar 1, 2020, 4:54 AM David Villasmil <
> david.villasmil.w...@gmail.com> wrote:
>
>>
>> Have you tried scaping it?
.select,0,\n});
> but it does not work. How can I do this?
> Philip Orleans
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
--
Regards,
David Villasmil
email: dav
nsips[4663]: Feb 26 06:19:34 [4744]
> ERROR:core:do_assign: error at /etc/opensips/opensips.cfg:169
>
>
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
--
Regards,
David Villasmil
email: david.villasmil.w..
commands gives the same result.
>
> Starting opensips (via systemctl): Job for opensips.service failed
> because a configured resource limit was exceeded. See "systemctl status
> opensips.service" and "journalctl -xe" for details.
>
>
listinfo/systemd-devel
>
> --
>
> -- Unit opensips.service has failed.
>
> --
>
> -- The result is failed.
>
> Feb 12 10:04:24 a3783871a39f systemd[1]: Unit opensips.service entered
> failed state.
>
> Feb 12 10:04:24 a3783871a39f systemd[1]: opensips.service failed.
>
>
>
s exceeded. See "systemctl status
> opensips.service" and "journalctl -xe" for details.
>
>[FAILED]
>
>
>
> Where is doc page explaining how OpenSIPS 3 starts?
>
.100.100 - opensips
> sipofon.loc - where should the call go after failure_route has worked
>
>
>
>
>
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
--
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone: +34669448337
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
ists.opensips.org
> > http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
> ___
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
--
Regards,
David Villasmil
email: david.villasmil.w...@
The SDP describes the RTP session, should that be enough? MUST It be on the
rtp proxy?
On Fri, 31 Jan 2020 at 14:14, Daniel Zanutti
wrote:
> He didn't said SDP, he said RTP Sessions.
> Opensips cannot inspect rtp sessions.
>
> On Fri, Jan 31, 2020 at 11:09 AM Dav
___
>> Users mailing list
>> Users@lists.opensips.org
>> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>>
> _______
> Users mailing list
> Users@lists.opensips.org
> http://lists.opensips.org/cgi-bin/mailman/listinfo/users
>
--
with:
https://www.kamailio.org/docs/modules/stable/modules/rtpengine.html#rtpengine.f.rtpengine_offer
5.2. rtpengine_offer([flags])
*replace-origin* - flags that IP from the origin description (o=) should be
also changed.
Regards,
David Villasmil
email: david.villasmil.w...@gmail.com
phone
1 - 100 of 151 matches
Mail list logo