Hi, if I understand correctly, you have to get $rb from onreply_route.
ср, 27 мар. 2024 г. в 02:19, Matthew Schumacher :
>
> Hello,
>
> I'm trying to log the media port for another system and using this code
> to grab the m line out of an SDP header:
>
>if (has_body("application/sdp")){
>
Hi
1. Try to run with default config - it will give you a way to understand if
crash depends on configuration
If it will start successfully then just check config again params specific
for new VM.
пт, 10 февр. 2023 г. в 15:45, Sasmita Panda :
> Hi All ,
>
> I have been using opensips 3.2 for the
if you find this feature useful.
>
> [1] https://github.com/OpenSIPS/opensips/issues
>
> Best regards,
>
> Răzvan Crainea
> OpenSIPS Core Developer
> http://www.opensips-solutions.com
>
> On 6/28/22 11:03, Pavel Eremin wrote:
> > Hi, all, does anyone work with |stat_ser
Hi, all, does anyone work with stat_series_profile, it seems very useful.
My question is if some value was created by update_stat_series, then this
stat variable will lives forever, even it 0.
Is it possible to set the lifetime for series?
___
Users
Hey!
In short, you should use the uac_auth() function in failure_route if you
are using default opensips.cfg.
If the carrier(trunk) wants you to be REGISTERED, then you have to use
restaurant module also.
вс, 9 янв. 2022 г. в 19:35, Gokan Atmaca :
> Hello
>
> (I sent wrong email before.) I
Thanks for your answer I suppose there is some little mistake in the code
of mid_registrar due to this error easylly reproducing on the new opensips
installation.
Conditions are simple: centos 7 or debian 10, opensips 3.2 ver, use
mid_registrar (mode=2 or 1) and registrar in the same script.
For
I am not sure, but seems you are sending calls to the same IP that you have
on Opensips? like SIP -> IP_A (opensips) -> IP_B(OPensips).
if you want to send a call through an external interface just send call to
some external IP (like sethost("ANY EXTERNAL IP");) and opensips will do
that with an
Hey,
to relay with specific interface i suppose you have use function
force_send_socket();
i am sure only about that scenario:
"
socket=udp:eth0:5060 as 1.1.1.1 #dhcp interface with external ip
socket=udp:2.2.2.2:5061
...
force_send_socket("udp:1.1.1.1:5060");
t_relay();
HI, add require("../../../common/cfg_comm.php");
before "require("template/header.php");"
works for me. Maybe a little bug.
чт, 21 окт. 2021 г. в 22:12, Eamon Garland :
> Hi Bogdan
> i am using the following for the install
>
> wget https://github.com/OpenSIPS/opensips-cp/archive/master.zip
>
ocessed or not, and
> only reprocess it if the flag is not set.
>
> [1] https://opensips.org/docs/modules/3.1.x/tm.html#param_T1_timer
>
> Best regards,
>
> Răzvan Crainea
> OpenSIPS Core Developer
> http://www.opensips-solutions.com
>
> On 10/22/20 12:32 PM, Pavel Eremin
Hi, community!
Is anyone can help me to understand how to avoid 2 situations:
1. I don't want to send retransmission (INVITE) from "opensips" to
"redirect" server, even "redirect" does not answer.
2. If I have sent a few invites to "redirect" , then i will receive a few
300 Redirect messages,
Hello, my 5 cents for understanding load balancer scheme:
https://opensips.org/pub/events/2016-05-10_OpenSIPS-Summit_Amsterdam/Giovanni_Maruzzelli-OpenSIPS_Summit2016-FreeSWITCH_HA.pdf
ср, 18 дек. 2019 г. в 22:31, Abu Ibrahim via Users :
> Hi,
>
> I recently started using opensips and installed
Hello why not regexp not working for you. I give you my example that works
fine.(but with 1.11)
to reload i use command opensipsctl fifo regex_reload
[config]
REGEX
loadmodule "regex.so"
modparam("regex", "file", "/usr/out_isp/etc/opensips/regex_groups")
...
if (pcre_match_group("$fU",
number ?
>
> On 01/29/2016 01:35 PM, MichaelLeung wrote:
>
> ok, thanks .
>
>
> On 01/29/2016 12:05 PM, Pavel Eremin wrote:
>
> Opensips will not change CLI or CAllerID (real number from carrier) if you
> don't tell him to do it. So, It's like ask what name f
Opensips will not change CLI or CAllerID (real number from carrier) if you
don't tell him to do it. So, It's like ask what name for "painting white
pages" - there is no name it's just blank pages.. I think
2016-01-29 8:08 GMT+05:00 MichaelLeung :
> any reply ?
>
>
> On
Hi, all! can CDRTool rate ordinary call and call to Toll-Free numbers at
the same time?
I know that we can change field Username (BillingPartyId) but how to use
field FROM for Toll-Free numbers and Username for ordinary calls.
___
Users mailing list
It's only discussion about new module, no real module available.
07.11.2014 11:29 пользователь Лытаев Антон Викторович l...@ptcomm.ru
написал:
This unit is compatible with version Opensips 1.11.2-tls (x86_64)? You can
get a direct link?
02.09.2014 20:26, Răzvan Crainea wrote:
Hi all,
The
Already make a bid as Erewin.
05.10.2014 20:36 пользователь Adam Raszynski netcentr...@gmail.com
написал:
Hi All,
I'm looking for paid support in fixing my opensips config file
All interested OpenSIPS hackers are welcome:
Thanks, i read all of docs and have question about performance. (I Did
describe it in another email to community)
30.09.2014 4:56 пользователь Adrian Georgescu a...@ag-projects.com
написал:
If you want to dive this deep into CDRTool, it would be a good start to
read the documentation, that is
Hi, All! I am using CDRTool with prepaid and when reached 15 calls per
second i have low performance.
As I understood CDRtool engine gets ALL active session and recalc
MaxSessionTime for ALL calls when new call happens?
so if i have many short calls CDRTool has heavy load.
I don't want to
Hi, All!
Trying to use callcontrol 2.1.0 and always get prepaid = None.
I can't see that callcontrol send request to CDRTool Engine? There is my
logs:
Sep 29 11:49:39 fiber4 call-control[15122]: Got request: init: callid=
303-7439@103.239.147.16 from=pavel sip:pa...@sip.fiberpipe.in:5060 ruri=
Thanks a lot! It's so simple)
2014-09-29 18:13 GMT+06:00 Venkatesh Macha linuxven...@gmail.com:
Hi pavel,
Are you setting prepaid_account_flag in opensips.cfg, i think
callcontrol is always treating your call as postpaid. so try to set
prepaid_account_flag.
Venkatesh
Hi, All! Let's dance with CDRTool
I am trying to use it on heavy load system and get stack.
Why in this code author match canonical number with string started by 0?(in
hard way) Because of this line all calls are postpaid...:(
* if
This code in rating.php...
2014-09-29 22:18 GMT+06:00 Pavel Eremin eremina@gmail.com:
Hi, All! Let's dance with CDRTool
I am trying to use it on heavy load system and get stack.
Why in this code author match canonical number with string started by
0?(in hard way) Because of this line
Hi people!
We need to implement some features in CDRTool and ready to work with
developer who can do it.
Core:
1. Prepaid based on IP Authorization.
Web:
For customer:
Add some pages and other things.
1. Balance - default page with account information,
2. Balance History - recharge
Why not use Dialplan module?
...
dp_translate(1,$fU/$var(from_user))
uac_replace_from(,sip:$var(from_user)$fd)
...
On Mon, 29 Aug 2011 01:53:10 +0600, s...@veliko-turnovo.com wrote:
Dear all,
I try to remove prefix from phone number without success.
$avp(prefix)=159#;
$avp(number)=$fU;
If you can reproduce the case, could you run a call with
debug=6 and post the opensips log ?
Regards,
Bogdan
On 08/08/2011 08:24 AM, Pavel Eremin wrote:
Hi!
iF i use topology_hiding in initial request then initial 'INVITE' are
good. There are no Record-Route or Via(except myself) header
It may be helpful for other people. if you solve it, please post answer...
i want to use TLS in near future.
On Fri, 22 Jul 2011 20:05:24 +0600, g...@dataproducts.ae wrote:
Dear Sir,
We are trying to connect a Grandstream Handy Tone 503 with Opensips 1.6.4
using TLS, and are having
in same directory.
i have done successfully make all when i got opensips_1_6_4 distribution and
put it in different directory.
--
Pavel Eremin
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
in my case it was because i doing svn co ... opensips_1_6 in same directory.
i have done successfully make all when i got opensips_1_6_4 distribution and
put it in different directory.
sorry, not distr, of course i got src.
--
Написано в почтовом клиенте браузера Opera:
I include RATELIMIT module to my OpenSIPS installation and i have a question:
What is DROP_RATE when i run rl_stat command...
if DROP_RATE grows is it dangerous?
--
Pavel Eremin
___
Users mailing list
Users@lists.opensips.org
http
you may change and control content of SDP body by module textops. So, if
port is change you may change it back or log it or smth else...
i use it when Broadworks change media port for G711 to 0...
Julian Yap julianok...@gmail.com писал(а) в своём письме Sat, 03 Jul
2010 03:37:48 +0600:
Any
I've got same trouble
and fix it in the same way...
--
Pavel Eremin
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo/users
.
Pleae help.
Thanks,
Prem
__ Information from ESET NOD32 Antivirus, version of virus signature
database 5178 (20100607) __
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
--
Pavel Eremin
___
Users
, version of virus signature
database 5180 (20100607) __
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
--
Pavel Eremin
___
Users mailing list
Users@lists.opensips.org
http://lists.opensips.org/cgi-bin/mailman/listinfo
35 matches
Mail list logo