Hi All
Having a strange issue, whereby if a call is placed between a WSS and a normal
sip device or even WSS - WSS the webclient does not respond to bye
[image.png]
SIP to SIP calls are fine
the error i see in the logs are
2023-11-24T16:40:50.024639+00:00 ip-10-254-49-96
>
>> You should route the REFER as any other sequential request and then the
>> other UA will handle it and transfer.
>>
>> Em seg., 23 de out. de 2023 às 12:02, nutxase via Users
>> escreveu:
>>
>>> So when using a webrtc client with mid_registrar it seems t
so no
> special handling. What transfer scenario are you currently failing ?
>
> Regards,
>
> Bogdan-Andrei Iancu
>
> OpenSIPS Founder and Developer
> https://www.opensips-solutions.com
>
> https://www.siphub.com
>
> On 10/16/23 5:49 PM, nutxase via Users wrote:
Hi All
I am using opensips as a mid_registrar for webrtc and everything is working
fine except call transfers, as i understand they use refer, is there anything
specific i need to change to get them to work?
if you can point me to a module id appreciate it
Sent with [Proton
t;>>>
>>>>> Hi Bogdan
>>>>>
>>>>> So the ip is the ip of the uac client (internet ip)and not sure how to
>>>>> check for any nat issues there? please help :)
>>>>> not sure exactly sure how it would be down as it is mid reg
y sure how it would be down as it is mid registrar looking
>>>> up the location then establishing the call
>>>>
>>>> Sent with [Proton Mail](https://proton.me/) secure email.
>>>>
>>>> --- Original Message ---
>>>> On Tuesday, June 1
the original connection is down and opensips is not
>>> able to create a new one from server side.
>>>
>>> Regards,
>>>
>>> Bogdan-Andrei Iancu
>>>
>>> OpenSIPS Founder and Developer
>>> https://www.opensips-solutions.com
>&g
under and Developer
> https://www.opensips-solutions.com
>
> https://www.siphub.com
>
> On 6/12/23 7:17 PM, nutxase via Users wrote:
>
>> Hi Guys
>>
>> So i am using a wss client and sending registration via mid_registrar to
>> asterisk(pjsip) and all works
Hi Guys
So i am using a wss client and sending registration via mid_registrar to
asterisk(pjsip) and all works fine except on inbound calls we get a lot of
errors and googling has pointed me to this link
https://issues.asterisk.org/jira/browse/ASTERISK-28211
here are the errors i get
Jun 12
e:
>>>
>>>> even with a stateless forward asterisk see's this
>>>>
>>>> Contact: 1000/sip:609q2255@opensipsip:5060 ee32101394 NonQual nan
>>>>
>>>> but i wanted it to be
>>>> Contact: 1000/sip:609q2255@uacip:5060 ee32101394
t to be
>> Contact: 1000/sip:609q2255@uacip:5060 ee32101394 NonQual nan
>>
>> Sent with [Proton Mail](https://proton.me/) secure email.
>>
>> --- Original Message ---
>> On Thursday, June 1st, 2023 at 3:00 PM, nutxase via Users
>> wrote:
>>
---
On Thursday, June 1st, 2023 at 3:00 PM, nutxase via Users
wrote:
> Hi Daniel
>
> Thanks for the reply
>
> So it seems asterisk pjsip shows the contact as the ip of opensips not the uac
> i will try with stateless as i just want to forward it via opensips and
> asterisk to not k
:
>
> Monitore SIP trace and confirm if Opensips is changing the contact (probably
> not)
>
> On Wed, May 31, 2023 at 10:54 AM nutxase via Users
> wrote:
>
>> Hey guys
>>
>> I have set opensips to take registrations and pass them through to asterisk
Hey Guys
How can i make opensips rewrite the contact of the registration sent to the
received ip
currently i have
UAC -> opensips > asterisk
and asterisk shows the ip of the uac as the opensips ip
how can i make it rewrite it to the ip in the path or the via received=
thanks
Sent with
Hey guys
I have set opensips to take registrations and pass them through to asterisk
using the below
but my question is how can i make it set the contact to the ip of the uac and
not the ip of opensips ?
if (is_method("REGISTER")) {
Hi All,
What is the best way to extract a custom X header from a sip message and log it
as a variable
example i receive X-notice:200 and i want to create a variable that with 200
is that possible
Sent with [Proton Mail](https://proton.me/) secure
Hi Guys
When an endpoint sends me a message example
[image.png]
What would be the best way to extract an X-header from it and perform a
specific action, example disable a uac
Sent with [Proton Mail](https://proton.me/) secure email.___
Users mailing
able
> > pinging in your setup to keep the connection open, and ideally reconnect
> > from the browser if the connection gets closed.
> >
> > Best regards,
> >
> > Răzvan Crainea
> > OpenSIPS Core Developer
> > http://www.opensips-solutions.com
&g
Hey All
Strange error
i have registrations working via WSS and all works fine about after about 5
incoming calls
the log gets these errors and the only way to receive calls again is to restart
opensips
Jan 19 20:06:41 [localhost] /usr/sbin/opensips[4263]:
ERROR:proto_wss:ws_sync_connect:
Hi guys
So i notice when i register a WSS client to opensips the contact shows
something like
Contact": "sip:62dntqm1@rwtjcrhyne3j.invalid;transport=wss",
which causes inbound calls to not route and show 476 unresolvable destination.
any tips of where to look here?
Sent with [Proton
anyone have any pointers why uac's wont auth :(
Sent with [Proton Mail](https://proton.me/) secure email.
--- Original Message ---
On Wednesday, January 18th, 2023 at 1:17 PM, nutxase via Users
wrote:
> Hey All
>
> I am trying to get my UAC to register to opensips usin
Hey All
I am trying to get my UAC to register to opensips using auth_db
but i keep getting unathorised, and what i can see is the contact is showing
the extension and the phone local ip
any ideas what im missing?
here is the config
modparam("auth_db", "db_url",
Hi Guys
I notice when i enable the registrar module any registration attempt is getting
a 200
How can i stop this and make authenticate them based on what i have in mysql?
Sent with [Proton Mail](https://proton.me/) secure email.___
Users mailing list
Hi All!
I am trying to get opensips to send a re-invite to asterisk on incoming calls
my scenario is
- Call comes to opensips
- Opensips runs a custom script to wake up a device
- Device sends a new registration to asterisk
- Opensips needs to send a re-invite to asterisk(need help here)
-
Hi Guys
How do i suspend a transaction then run a script then resume it similar to how
kamailio does t_suspend?
Sent with [Proton Mail](https://proton.me/) secure email.___
Users mailing list
Users@lists.opensips.org
Hi All
i notice this is no longer working in 3.3
if (!t_suspend()) {
xlog("Failed to suspend transaction\n");
exit;
any idea what replaced t_suspend?
Sent with [Proton Mail](https://proton.me/) secure email.___
Users mailing list
Hi All
I am trying to get tls working with my letsencrypt cert but i keep getting this
error
ERROR:tls_openssl:openssl_tls_accept: SSL_ERROR_SYSCALL err=Success(0)
ERROR:tls_openssl:openssl_tls_accept: New TLS connection from :47817 failed
to accept
Dec 15 16:32:54 [localhost]
i did try and doesnt seem to go to the second one :(
Sent with [Proton Mail](https://proton.me/) secure email.
--- Original Message ---
On Wednesday, December 7th, 2022 at 5:42 PM, nutxase via Users
wrote:
> Hi Guys
>
> How can i make it that if an invite comes in and the
Hi Guys
How can i make it that if an invite comes in and the location is not found that
it will then try look again for the location before sending 404?
i have tried
if (!mid_registrar_lookup("location")) {
sleep (5);
if (!mid_registrar_lookup("location")) {
t_reply(404, "Not Found");
}
}
Hi All
I am trying to set mid_registrar to retry looking up the location of the
registration if it does not find it the first time
as when it receives the invite it runs a push script to wake up the phone and
then needs to lookup the new location and send the call but currently it just
gives
Has anyone got wolfssl to install on centos?
Sent from Proton Mail mobile
Original Message
On 28 Nov 2022, 16:30, nutxase via Users wrote:
> Hi All
>
> i notice there is no opensips-modules-wolfssl package for centos but only for
> debian
>
> is this intenti
Hi All
i notice there is no opensips-modules-wolfssl package for centos but only for
debian
is this intentional?
as on my centos system where i am having to use openssl i get this error
ERROR:proto_wss:wss_read_req: cannot fix read connection___
i there,
> Just t_relay(); to the Asterisk IP, it should work perfectly fine.
>
> Regards,
> Jehanzaib
>
> On Fri, Nov 18, 2022 at 12:09 AM nutxase via Users
> wrote:
>
>> Yes so thats my idea but the problem i see is that asterisk sees the contact
>> as the opensips det
Yes so thats my idea but the problem i see is that asterisk sees the contact as
the opensips details not the UAC device
Sent with [Proton Mail](https://proton.me/) secure email.
--- Original Message ---
On Thursday, November 17th, 2022 at 11:04 AM, johan wrote:
> If you don't want to
I guess let me go one step further and ask advice
What do you think is the best scenario to use if i want to register to asterisk
and then when when my UAC goes to "sleep" keep the registration up on asterisk
Sent with [Proton Mail](https://proton.me/) secure email.
--- Original Message
, Liviu Chircu
wrote:
> On 16.11.2022 18:56, nutxase via Users wrote:
>
>> Is it possible to change the contact on mid_registrar to be the endpoint ip
>> etc
>>
>> as currently when registering to asterisk we see the details of opensips,
>> but i want to hi
Hi All
Is it possible to change the contact on mid_registrar to be the endpoint ip etc
as currently when registering to asterisk we see the details of opensips, but i
want to hide that and rather show the endpoint
is that possible?___
Users mailing
> could not resolve hostname: "73812158w452.invalid"
>
> Sent with [Proton Mail](https://proton.me/) secure email.
>
> --- Original Message ---
> On Monday, November 14th, 2022 at 4:13 PM, nutxase via Users
> wrote:
>
>> Hi
>>
>> I ju
2022 at 4:13 PM, nutxase via Users
wrote:
> Hi
>
> I just added them and restarted then re-registered but still dont have
> received :(
>
> (opensips-cli): mi ul_dump
> {
> "Domains": [
> {
> "name": "location",
> "hash_siz
Hi
I just added them and restarted then re-registered but still dont have received
:(
(opensips-cli): mi ul_dump
{
"Domains": [
{
"name": "location",
"hash_size": 512,
"AORs": [
{
"AOR": "[2...@sip-proxy.nutxase.co](mailto:2...@sip-proxy.coltek.co.uk)m",
"Contacts": [
{
"Contact":
"AORs": []
>>>> },
>>>> {
>>>> "name": "location p0 v",
>>>> "hash_size": 512,
>>>> "AORs": [
>>>> {
>>>> "AOR": "[200@
ot;,
>> "Callid": "q71r14q930a64a9xecw7o1",
>> "Cseq": 2,
>> "User-agent": "Foreground App",
>> "State": "CS_NEW",
>> "Flags": 0,
>> "Cflags": "",
>> "Socket&quo
t looks to me the lookup succeeds, but the
> the r_relay() fails.
>
> If you do a `opensips-cli -x mi ul_dump `, how is the
> registration record looking like ?
>
> Regards,
>
> Bogdan-Andrei Iancu
>
> OpenSIPS Founder and Developer
> https://www.opensips-solutions.com
>
Hi All
I have got my webrtc client working with mid_registrar to asterisk
But when asterisk sends incoming calls to the phone it fails to lookup the
location and i get
CRITICAL:core:mk_proxy: could not resolve hostname: "zeid6muzjbdj.invalid"
Nov 10 17:00:12 opensips01
I suppose even uac_registrar could be the right way
any suggestions
Thanks,
Mike
Sent with [Proton Mail](https://proton.me/) secure email.
--- Original Message ---
On Monday, November 7th, 2022 at 11:51 AM, nutxase via Users
wrote:
> Hi All,
>
> I am setting up the mid
Hi All,
I am setting up the mid registrar module and was wondering if the following is
possible
when the UAC drops its registration that the opensips keeps the registration
active on asterisk
example we have a mobile softphone that goes to sleep and then opensips
deregisters on asterisk, so
46 matches
Mail list logo
