Does the strongSwan project still provide consulting services? I have
been unable to reach the posted consulting contact
andreas.stef...@strongswan.org .
thanks,
Jeff
Sorry for wasting your time; I instead used a recipe provided at
https://github.com/jawj/IKEv2-setup and it configured StrongSwan for
me flawlessly - now works with Android and Windows 10 clients.
Works like a charm, much faster and better than commercial VPN providers.
On Mon, Nov 20, 2017 at
You can try to remove/comment out lines of ike= and esp= and try to connect to
server (leaving it to use default strongswan ciphers).
Anvar Kuchkartaev
an...@anvartay.com
Original Message
From: Bugakov, Alexander
Sent: lunes, 20 de noviembre de 2017 04:30 p.m.
To:
Hi Alexander,
could you increase the debug level to "cfg 2" on the server which would
show the received and installed crypto algorithms.
Regards
Andreas
On 20.11.2017 16:30, Bugakov, Alexander wrote:
> Hello,
>
> I tried to install StrongSwan IKEv2 on DigitalOcean's freshly
> configured
Hello Andreas
Thanks for the help..
Yes!!! It works!I did just as mentioned in the example shown by you
==
root@lssimgw2:/usr/local/etc#
root@lssimgw2:/usr/local/etc#
root@lssimgw2:/usr/local/etc# ipsec statusall
Hi,
Currently StrongSwan logs every information. Additionally, you can get a lot of
information when you start ipsec with --nofork --all. But, is it possible to
get a reply directly from strongswan? Especially, when there is a certificate
error or mismatch, or if ipsec / ike has some other
Hi Rajiv,
if "left" is local and "right" is remote then only
leftfirewall and lefthostaccess are defined.
rightfirewall and righthostaccess are used when
"right" is local and "left" is remote as in the
following scenario where sides are swapped:
Hello,
I tried to install StrongSwan IKEv2 on DigitalOcean's freshly
configured server using this tutorial -
https://www.digitalocean.com/community/tutorials/how-to-set-up-an-ikev2-vpn-server-with-strongswan-on-ubuntu-16-04
I created fresh Ubuntu instance, got an IP address 128.199.36.88 and
Hi
I have a ipsec tunnel deployed/configured as below:
PC1(lan)[GW1](wan)=IPSEC(wan)[GW2](lan)---PC2
PC1-ipaddr: 192.168.22.x
PC2-ipaddr: 192.168.25.x
GW1-lan-ipaddr: 192.168.22.1
GW2-lan-ipaddr: 192.168.25.1
I see that to allow access to 192.168.22.1 from PC2 (via the ipsec
It's certainly not something with strongSwan. Maybe Windows tries to access
some URL to check connectivity, like Android and iOS do.
On 19.11.2017 17:03, Mek wrote:
> In the meantime, the connection dropped even if it was active, e.g. there was
> a video stream going through. And the connection
10 matches
Mail list logo