On Tue, 2014-01-21 at 21:22 -0300, Federico Sayd wrote:
> Hello:
>
> I am having problems with bonding
>
> I have installed Centos 6.5 in order to use it as host. I configured
> eth0 with the vlan of the management network (Vlan 70). Then I
> registered the host to the engine (3.3.2-1-el6) and th
Thanks Malini for the comments.
We will re-visit the points mentioned below and update you on the same.
Thanks and Regards,
Shubhendu Tripathi
On 01/22/2014 01:07 AM, Malini Rao wrote:
Hi Shubendu,
I saw your invite for your walkthrough on the feature - Gluster volume
snapshots and also follo
Michal,
- Original Message -
> From: Michal Skrivanek
> To: David Li
> Cc: Itamar Heim ; "d...@redhat.com" ;
> "users@ovirt.org List"
> Sent: Tuesday, January 21, 2014 3:03 PM
> Subject: Re: [Users] Blank VM Install Console
>
>
>
>> On 21 Jan 2014, at 23:18, David Li wrote:
>>
Hello:I am having problems with bondingI have installed Centos 6.5 in order to use it as host. I configured eth0 with the vlan of the management network (Vlan 70). Then I registered the host to the engine (3.3.2-1-el6) and the engine installed oVirt in the host without problem. Ovirtmgmt was creat
> On 21 Jan 2014, at 23:18, David Li wrote:
>
> Hi Michal,
>
> Should I use SPICE as console protocol in order to use web proxy?
It's for both noVNC and SPICE-HTML5 client
Not for virt-viewer or custom native vnc clients
"Spice proxy" would be for similar network layout but native spice clie
Hi Michal,
Should I use SPICE as console protocol in order to use web proxy?
On my engine, I have:
WebSocketProxy: Engine:6100 version: general
WebSocketProxyTicketValiditySeconds: 120 version: general
So is Webproxy using port 6100?
- Original Message -
> From: Michal Skrivanek
>
On 01/22/2014 12:09 AM, Michal Skrivanek wrote:
On 21 Jan 2014, at 22:57, David Li wrote:
Hi Michal,
Itamar asked me to write to you about how to use WebProxy to access the VM
console.
I have a set up like this on three different physical servers:
Browser (RHEL6, firefox 24.2.0) --
> On 21 Jan 2014, at 22:57, David Li wrote:
>
> Hi Michal,
>
> Itamar asked me to write to you about how to use WebProxy to access the VM
> console.
>
> I have a set up like this on three different physical servers:
>
>
> Browser (RHEL6, firefox 24.2.0) --- ovirt-engine
> --
Hi Michal,
Itamar asked me to write to you about how to use WebProxy to access the VM
console.
I have a set up like this on three different physical servers:
Browser (RHEL6, firefox 24.2.0) --- ovirt-engine
--- host (CPU)
However the browser machine doesn't
On 01/21/2014 10:31 PM, David Li wrote:
Dafna,
I have restarted the host and now started to install the Vm from scratch.
Following Itamar's suggestion this time, I chose VNC as console option.
How can I use vnc viewer to attach to the VM?
I don't remember if virt-viewer detects the vnc in the
Dafna,
I have restarted the host and now started to install the Vm from scratch.
Following Itamar's suggestion this time, I chose VNC as console option.
How can I use vnc viewer to attach to the VM?
David
- Original Message -
> From: Dafna Ron
> To: Michal Skrivanek
> Cc: David Li
On 01/21/2014 02:26 PM, Adam Litke wrote:
> On 21/01/14 12:49 +0100, Juan Hernandez wrote:
>> On 01/20/2014 11:33 PM, Yair Zaslavsky wrote:
>>> Hi Adam,
>>> Looks like you have problems in running the Root DSE query.
>>> I would like you to try and troubleshoot by comparing this to the execution
>
Hi Shubendu,
I saw your invite for your walkthrough on the feature - Gluster volume
snapshots and also followed the feature link on the wiki and reviewed it. From
the UX/ UI perspective, it looks good and I had only a couple of comments.
The remove snapshot section seems to indicate an abilit
Thanks for the response, Dafna...
> vdsm is using mount command.
> please look at vdsm log and find the mount command that is failing and
> run it manually to see the mount trace.
>
> you can also attach the vdsm log here and we can try to find it :)
>
> Dafna
Just needed a clue where to look
David,
Let's try to debug the issue you have now.
Can you please attach engine and vdsm logs?
Thanks,
Dafna
On 01/21/2014 05:32 PM, Michal Skrivanek wrote:
On 21 Jan 2014, at 18:26, David Li wrote:
Before the VM install console problem, everything was normal, the cpu, host,
storage were
On 21 Jan 2014, at 18:26, David Li wrote:
> Before the VM install console problem, everything was normal, the cpu, host,
> storage were done following the quick start guide.
Well, whatever is the reason the symptoms you see suggests something is either
crashing (vdsm on the host) or is unre
Before the VM install console problem, everything was normal, the cpu, host,
storage were done following the quick start guide.
- Original Message -
> From: Michal Skrivanek
> To: David Li
> Cc: Itamar Heim ; "users@ovirt.org List"
> Sent: Tuesday, January 21, 2014 9:24 AM
> Subject:
On 21 Jan 2014, at 18:20, David Li wrote:
> Itamar,
>
> I tried what you suggested. Now when I restart the VM, it ends up in unknown
> state. Moreover, all storage domains and the host are all down. What do I
> need to do to recover from here?
Thos is way beyond graphics issues. You have so
Itamar,
I tried what you suggested. Now when I restart the VM, it ends up in unknown
state. Moreover, all storage domains and the host are all down. What do I need
to do to recover from here?
- Original Message -
> From: Itamar Heim
> To: David Li ; Michal Skrivanek
>
> Cc: "users@o
the storage space is configured in percentages and not physical size.
so if 20G is less than 10% (default config) of your storage it will
pause the vms regardless of how much GB you still have.
this is configurable though so you can change it to less than 10% if you
like.
to answer the second
vdsm is using mount command.
please look at vdsm log and find the mount command that is failing and
run it manually to see the mount trace.
you can also attach the vdsm log here and we can try to find it :)
Dafna
On 01/20/2014 09:17 PM, Willard Dennis wrote:
Thanks for the reply, Markus.
Hi,
I just checked this BZ:
https://bugzilla.redhat.com/show_bug.cgi?id=1025845
This is closed for RedHat but afaik not for upstream.
It mentions the fixed mom version:
mom-0.3.2-8.el6ev
but on resources.ovirt.org I find just older versions
like
http://resources.ovirt.org/releases/3.4.0-alpha/r
On Thu, Jan 9, 2014 at 2:27 PM, Ján Tomko wrote:
> On 01/08/2014 05:48 PM, Eric Blake wrote:
>> On 01/08/2014 02:45 AM, Dan Kenigsberg wrote:
>>> On Wed, Jan 08, 2014 at 01:26:23AM +0100, Gianluca Cecchi wrote:
Hello,
following the bugzilla here:
https://bugzilla.redhat.com/show_bug
> Von: sander.grendel...@gmail.com [sander.grendel...@gmail.com]" im
> Auftrag von "Sander Grendelman [san...@grendelman.com]
> Gesendet: Dienstag, 21. Januar 2014 16:25
> An: Markus Stockhausen
> Cc: noc; users@ovirt.org
> Betreff: Re: [Users] Change bootdisk from IDE to virtio
>
> (Below is bas
No, I think I didn't explain it good enough.
the link in webadmin is created via the novnc program, right?
(basically just html+js)
currently it resides directly on the host where ovirt-engine
is installed.
we want to move this to a different host, but how?
I mean, I got the ticket, I got the we
I am still trying to resolve this issue. I found the "Troubleshooting NFS
Storage Issues" page, and have a few questions regarding the troubleshooting
steps contained therein...
1) In the "Permissions" section, there's a suggestion under the "SELinux"
subsection to "su - vdsm -s /bin/bash" and t
On Jan 21, 2014, at 15:55 , Sven Kieske wrote:
> Hi,
>
> yeah we have already setup a websocket proxy on a different host.
> But our goal is not just to use this websocket proxy in the engine
> and clicking the console link in webadmin.
>
> We want a setup like this:
>
> Host a: engine
> Host
(Below is based on rhel6 experience, please translate to Suse)
May be a grub issue, look at /boot/grub/device.map and /boot/grub/grub.conf
On Tue, Jan 21, 2014 at 2:06 PM, Markus Stockhausen
wrote:
>> > After switching the disk over to virtio the boot process hangs at
>> >
>> > SeaBIOS...
>> >
Hi Alan,
May I just inquire about the two alternative solutions that had been
proposed here, and why you opted against? As a reminder, I'm referring to:
1. Using a firewall VM with one vNIC per VLAN network.
2. Using VDMS hooks to simulate TRUNK.
Both of these should allow migration, etc. without
Hi,
yeah we have already setup a websocket proxy on a different host.
But our goal is not just to use this websocket proxy in the engine
and clicking the console link in webadmin.
We want a setup like this:
Host a: engine
Host b: websocket proxy
Host c: custom user portal with a link which opens
It looks like this (kind of) works on ovirt already.
I was able to install win98 from cdrom on a VM with IDE disk.
There are some issues:
- The VM tends to hang during boot, choosing step by step confirmation
(my first suspect was javasup.vxd) seems to fix this, this doesn't
happen if I use the "-
Hi Meital and Liron
Any progress troubleshooting this VM import issue?
it happens in ovirt-engine 3.3.2 and ovirt-engine 3.3.3 as well.
Madhav
-Original Message-T
o: Madhav V Diwan
Subject: Re: [Users] fedora19 ovirt host-- VM import failed
Date: Fri, 17 Jan 2014 16:53:37 -0500 (EST
On Jan 21, 2014, at 13:09 , Sven Kieske wrote:
> Hi,
>
> Am 21.01.2014 12:22, schrieb Michal Skrivanek:
>> setting the ticket is a VM's action "ticket"
>> after that you can spawn your client and connect to the desired host/port
>> you get from VM display's address, secureport
>
> well it's c
On Jan 21, 2014, at 13:15 , Juan Hernandez wrote:
> On 01/21/2014 12:22 PM, Michal Skrivanek wrote:
>>
>> On Jan 21, 2014, at 11:48 , Sven Kieske wrote:
>>
>>> Hi,
>>>
>>> we are quite impressed of the novnc console
>>> option to get access to the vms.
>>>
>>> however, we want to implement
On 21/01/14 12:49 +0100, Juan Hernandez wrote:
On 01/20/2014 11:33 PM, Yair Zaslavsky wrote:
Hi Adam,
Looks like you have problems in running the Root DSE query.
I would like you to try and troubleshoot by comparing this to the execution of -
ldapsearch -x -h -s base
I think the problem is
On 20/01/14 17:33 -0500, Yair Zaslavsky wrote:
Hi Adam,
Looks like you have problems in running the Root DSE query.
I would like you to try and troubleshoot by comparing this to the execution of -
ldapsearch -x -h -s base
Thanks for taking a look. Here is the result:
[alitke:~] $ ldapsearc
> > After switching the disk over to virtio the boot process hangs at
> >
> > SeaBIOS...
> >
> > Machine UUID ...
> >
> > iPXE ...
> >
> > Booting from Hard Disk ...
>
> initramfs doesn't contain virtio drivers?
Tried it without luck:
linux-xj78:~ # blkid
/dev/vda1: UUID="d03b0079-c2e1-4ca2-
On 21-1-2014 13:16, Markus Stockhausen wrote:
Hello,
i have a SLES 11 VM that was migrated into ovirt. I successfully
changed all except the boot/root disk to virtio. Nevertheless I'm
unable to do the same for the boot disk itself
What I've done so far:
- replace all /dev/sdx entries in fstab
Hello,
i have a SLES 11 VM that was migrated into ovirt. I successfully
changed all except the boot/root disk to virtio. Nevertheless I'm
unable to do the same for the boot disk itself
What I've done so far:
- replace all /dev/sdx entries in fstab to /disk/by-uuid
- replace all /dev/sdx entries
On 01/21/2014 12:22 PM, Michal Skrivanek wrote:
>
> On Jan 21, 2014, at 11:48 , Sven Kieske wrote:
>
>> Hi,
>>
>> we are quite impressed of the novnc console
>> option to get access to the vms.
>>
>> however, we want to implement our own
>> userportal. So is it possible
>> to create the novnc ti
Hi,
Am 21.01.2014 12:22, schrieb Michal Skrivanek:
> setting the ticket is a VM's action "ticket"
> after that you can spawn your client and connect to the desired host/port you
> get from VM display's address, secureport
well it's cool I can set the ticket, but the "client" would be novnc in
ou
On 01/20/2014 11:33 PM, Yair Zaslavsky wrote:
> Hi Adam,
> Looks like you have problems in running the Root DSE query.
> I would like you to try and troubleshoot by comparing this to the execution
> of -
>
> ldapsearch -x -h -s base
>
I think the problem is that your LDAP server is configured
BEGIN:VCALENDAR
PRODID:Zimbra-Calendar-Provider
VERSION:2.0
METHOD:REQUEST
BEGIN:VTIMEZONE
TZID:Asia/Kolkata
BEGIN:STANDARD
DTSTART:16010101T00
TZOFFSETTO:+0530
TZOFFSETFROM:+0530
TZNAME:IST
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
UID:3440764a-ef38-4491-a023-f369dcfe9a18
SUMMARY:Feature Review:
BEGIN:VCALENDAR
VERSION:2.0
METHOD:REQUEST
PRODID:-//PYVOBJECT//NONSGML Version 1//EN
BEGIN:VTIMEZONE
TZID:Asia/Kolkata
TZURL:http://tzurl.org/zoneinfo-outlook/Asia/Kolkata
X-LIC-LOCATION:Asia/Kolkata
BEGIN:STANDARD
TZOFFSETFROM:+0530
TZOFFSETTO:+0530
TZNAME:IST
DTSTART:19700101T00
END:STANDARD
On Jan 21, 2014, at 11:48 , Sven Kieske wrote:
> Hi,
>
> we are quite impressed of the novnc console
> option to get access to the vms.
>
> however, we want to implement our own
> userportal. So is it possible
> to create the novnc ticket / open a vnc
> session with the vm event via REST-API?
Hi,
we are quite impressed of the novnc console
option to get access to the vms.
however, we want to implement our own
userportal. So is it possible
to create the novnc ticket / open a vnc
session with the vm event via REST-API?
If yes how?
If not, how could this be achieved?
--
Mit freundlic
Am Dienstag, den 21.01.2014, 11:33 +0500 schrieb Nauman Abbas:
> Hello there
>
>
> I'm facing this problem and this has happened to me multiple times on
> different machines. I have two hard drives in my system (lets say HDD
> A and HDD B). I boot the system from the oVirt node CD to install it.
Hi Dan,
Sorry, attached is engine.log I've taken out the two sections where
each of the VM's were paused.
Does the error "VM babbage has paused due to no Storage space error"
mean the main storage domain has run out of storage, or that the VM
has run out?
Both VM's appear to have been running on
Hi Dan,
Sorry for only coming back to you now.
The VM's are thin provisioned. The Server 2003 VM hasn't run out of
disk space there is about 20Gigs free, and the usage barely grows as
the VM only shares printers. The other VM that paused is also on thin
provisioned disks and also has plenty space,
Hi
If you want to enlarge an existing storage domain the easiest way is
to extend the storage domain. You can edit the domain and add another
LUN to be a part of that domain and oVirt will take care of extending
the domain - the only thing you need is another LUN to use.
wow, it it looks so si
50 matches
Mail list logo
