even if the other hosts can see the domain, it doesn't mean that there
is no problem from that particular host.
if you checked everything and you are positive that the host can see and
connect to the domain please restart vdsm to see that there is no cache
issue.
Dafna
On 07/16/2014 07:21 PM,
Hi,
we have enabled our portal ip address on the engine and hosts firewall but
still the connection failed. so there should be no firewall issues.
--
Regards
Shanil
On Wed, Jul 16, 2014 at 3:26 PM, Shanil S wrote:
> Hi Sven,
>
> Regarding the ticket "path", Is it the direct combination of ho
It is already available the python-pthreading 0.1.3-3 for epel.
And solving the problem with network installing new host.
--
contatos:
Celular: ( 99 ) 9143-5954 - Vivo
skype: lucasd3castro
msn: lucascastrobor...@hotmail.com
___
Users mailing list
Users
- Original Message -
> From: "力波 王"
> To: users@ovirt.org
> Sent: Wednesday, July 16, 2014 10:49:34 AM
> Subject: [ovirt-users] change ovirt-engine's IP
>
> Hi,all:
>
> How could I change overt-engine’s IP and host’s IP
For the engine please see [1].
AFAIK changing just the IP address
After further investigation and reading. Glusterfs is not really designed for
database operations. So I am retracting one question and curious about
anyone’s thoughts regrading the new set of questions.
Should I partition the mirrored pair into two slices (100GB and 800GB). Then
present ovir
I built a new node+hosted engine setup, using up-to-date 6.5 and oVirt
3.4.3-RC. I see some odd messages, that I think are probably related:
- In the hosted engine UI, I have an Alert that says "Failed to verify
Power Management configuration for Host hosted_engine_1."
- On the node, I get the
What do I do when a host in a cluster cant find a storage domain that "it
thinks" doesnt exist? The storage domain is in the db and is online because one
of the other hosts is working just fine. I pulled this out of the vdsm.log. I
even tried rebooting
Thread-30::ERROR::2014-07-16
14:19:10,5
> Von: users-boun...@ovirt.org [users-boun...@ovirt.org]" im Auftrag von "André
> Freitas [afrei...@ubiwhere.com]
> Gesendet: Mittwoch, 16. Juli 2014 15:22
> An: users@ovirt.org
> Betreff: [ovirt-users] Removal of snapshot taking too long
>
> Hi,
>
> i don't know if its normal but i'm having sit
I looked through the logs and did not see anything of interest. Then all of a
sudden the problem fixed itself.
Weird.
Thanks for your help though.
Usman
-Original Message-
From: Itamar Heim [mailto:ih...@redhat.com]
Sent: Wednesday, July 16, 2014 10:52 AM
To: Aslam, Usman; users@ovirt.
I have 10 mac minis at my disposal. (Currently, I’m booting each device using
a centos6.5 usbstick leaving the 2 disks free for use)
GOAL:
To build a cluster of 10 servers running postgres-xc
EQUIPMENT:
10 mac mini: i7-3720QM@2.60GHz/16G RAM/1x1gbit NIC/2x1TB SSDs (zfs mirrored)
REQUEST:
Plea
Hi,
We have a production environment with KVM+centos6 and we want to switch to
ovirt.
At this moment we have 12 VM on three independent server.
This VMs uses the local disks of servers, we don't have a central storage.
currently we have for ovirt
- Two Dell R710 with 128 gigs of ram.
- A
Minutes:http://ovirt.org/meetings/ovirt/2014/ovirt.2014-07-16-14.05.html
Minutes (text): http://ovirt.org/meetings/ovirt/2014/ovirt.2014-07-16-14.05.txt
Log:
http://ovirt.org/meetings/ovirt/2014/ovirt.2014-07-16-14.05.log.html
=
#ovirt: oVirt Weekly Sync
On 07/16/2014 05:47 PM, Aslam, Usman wrote:
Hi Guys,
We have two Ovirt clusters setup in one datacenter. Dev and Prod.
I have a situation where if I power off a VM in the Prod environment, it
does not start up again.
I get the following when trying to run it …
“Failed to run VM tuskweb-prod-0
Hi Guys,
We have two Ovirt clusters setup in one datacenter. Dev and Prod.
I have a situation where if I power off a VM in the Prod environment, it does
not start up again.
I get the following when trying to run it ...
"Failed to run VM tuskweb-prod-02 (User: admin@internal)."
"Error while execu
While attempting to remove a logical network from one of my hosts, Im getting
the following error.
Error while executing action Setup Networks: Unexpected exception
Im seeing the following error in the vdsm.log.
Thread-72::ERROR::2014-07-16 10:03:46,773::BindingXMLRPC::1086::vds::(wrapper)
I believe that this is a system limitation. There should be an RFE open lready
- Original Message -
From: "André Freitas"
To: users@ovirt.org
Sent: Wednesday, July 16, 2014 9:22:24 AM
Subject: [ovirt-users] Removal of snapshot taking too long
Hi,
i don't know if its normal but i'
Hi,
i don't know if its normal but i'm having situations where i have to
wait almost 45 minutes to delete a live snapshot from a offline vm (my
datastores are all NFS).
Is there any way i can speed this? The problem is that i can't start the
correspondent vm until the snapshot is deleted...
Best
On St, 2014-07-16 at 08:50 -0400, Maurice James wrote:
> Does the driver get installed on the host or the vm?
Neither, this applies to the client. The host just creates virtual USB
hub and "plugs" redirected USB devices into it and guest sees the
devices just as if they'd be plugged physically.
C
Does the driver get installed on the host or the vm?
- Original Message -
From: "David Jaša"
To: "Maurice James"
Cc: "users"
Sent: Wednesday, July 16, 2014 6:39:25 AM
Subject: Re: [ovirt-users] USB Device selection
On Po, 2014-07-14 at 12:54 -0400, Maurice James wrote:
> Has anyone g
Il 16/07/2014 00:47, Christopher Jaggon ha scritto:
> Here is a list of packages :
>
> rpm -qa | grep -i vdsm gives :
>
> vdsm-python-4.14.9-0.el6.x86_64
> vdsm-python-zombiereaper-4.14.9-0.el6.noarch
> vdsm-xmlrpc-4.14.9-0.el6.noarch
> vdsm-4.14.9-0.el6.x86_64
> vdsm-cli-4.14.9-0.el6.noarch
>
>
On 07/16/2014 12:47 AM, Christopher Jaggon wrote:
Here is a list of packages :
rpm -qa | grep -i vdsm gives :
vdsm-python-4.14.9-0.el6.x86_64
vdsm-python-zombiereaper-4.14.9-0.el6.noarch
vdsm-xmlrpc-4.14.9-0.el6.noarch
vdsm-4.14.9-0.el6.x86_64
vdsm-cli-4.14.9-0.el6.noarch
When I try to run the
Here is a list of packages :
rpm -qa | grep -i vdsm gives :
vdsm-python-4.14.9-0.el6.x86_64
vdsm-python-zombiereaper-4.14.9-0.el6.noarch
vdsm-xmlrpc-4.14.9-0.el6.noarch
vdsm-4.14.9-0.el6.x86_64
vdsm-cli-4.14.9-0.el6.noarch
When I try to run the hosted engine setup I get this error in the
On Po, 2014-07-14 at 12:54 -0400, Maurice James wrote:
> Has anyone gotten the USB Device selection on the spice-viewer window
> to work?
>
Hi Maurice,
I suppose you use Windows client, is it the case? If so, yo either have
to install WinUSB driver for each device manually, or you need to build
Hi Sven,
Regarding the ticket "path", Is it the direct combination of host and port
? suppose if the host is 1.2.3.4 and the port is 5100 then what should be
the "path" value ? Is there encryption needs here ?
>>so you have access from the browser to the websocket-proxy, network
wise? can you pin
- Original Message -
> From: "Shanil S"
> To: "Sven Kieske"
> Cc: users@ovirt.org, dan...@redhat.com, asegu...@redhat.com
> Sent: Wednesday, July 16, 2014 11:30:32 AM
> Subject: Re: Guest VM Console Creation/Access using REST API and noVNC
>
> Hi Sven,
>
> Thanks for your reply..
>
>
Hi Sven,
Thanks for your reply..
There is no network errors found in the ovirt and we are able to access the
console from the ovirt panel,the only problem is we are not abel to access
from the other host via API….as we don't want to use the Ovirt panel for
the end users…so we use our own portal a
Hi,
We're going to compose oVirt 3.5.0 Second Beta on Mon *2014-07-21 08:00 UTC*.
Maintainers:
- Please be sure that 3.5 snapshot allow to create VMs before *2014-07-20 15:00
UTC*
The bug tracker [1] shows the following proposed blockers to be reviewed:
Bug ID Whiteboard Status Su
Hi,
We're going to start composing oVirt 3.4.3 GA tomorrow *2014-07-17 08:00 UTC*
from 3.4.3 branch.
The bug tracker [1] shows no open blocking bugs for the release
There are still 10 bugs [2] targeted to 3.4.3.
Excluding node and documentation bugs we still have 3 bugs [3] targeted to
3.4.3.
Hi,all:
How could I change overt-engine’s IP and host’s IP
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users
Okay, I can give you a short design overview
how you can make this work:
a) client browser -> gets novnc from ovirt-engine
or any other host where you host it.
b) client browser(novnc) gets the ticket and path via rest api
c) client browser(novnc) -> connects to websocket-proxy
with the rest-api t
30 matches
Mail list logo