On 28.08.14 11:05, Punit Dambiwal wrote:
Hi All,
Please help me to solve this problem...or suggest me any workaround ??
Thanks,
Punit
On Wed, Aug 27, 2014 at 8:01 PM, Karli Sjöberg karli.sjob...@slu.se wrote:
On Wed, 2014-08-27 at 19:52 +0800, Punit Dambiwal wrote:
Hi Itamar,
On 08/27/2014 02:29 PM, Markus Mathes wrote:
Hi,
I thought about a self hosted engine setup using 2 hosts connected to
a iSCSI storage.
A few questions arose and I didn't succeed finding the answers on the
web. I somehow don't get how the iSCSI integration in ovirt works.
- As far as I
Hello,
Well, I did not have success with my questions ;-) May be you have
considered they were too far from oVirt...
For the first one, after further research, I've found that it is OK
(GlusterFS over FC [SAN mode])...
But, about performance, I can't find useful results... Do you have
links
Punit,
What file system is your VM's partition, what operating system and
version ?
A question to others, if the doco says we support disk resize since
3.4, for what virtual disk type, and which operating systems and
their partition types are supported by this. I would have believed
you
Any knowledge as of when this on the works will be done?
In addition, we will want to migrate the VMs later on to be on the local
disks,
which setup would be currently better? Using NFS with single datacenter,
each kvm host will export his local drive as NFS and the VMS will be binded
to start on
Dear all,
Besides the fact that we as team where very happy about ovirt and the
community, there is a chance that we have to move to RHEV... Superiors
decisions...
Now my next obvious question is... IF this will be the case, can we move
all of our vms to RHEV or... If so, how can we do this in
On 08/28/2014 10:31 AM, Elad Shmitanka wrote:
Any knowledge as of when this on the works will be done?
to mix local storage and shared storage in same cluster - i doubt will
make it for 3.6 (which will focus on enabling this flow by removing the
SPM role). so ~12 months.
In addition, we
On 08/28/2014 10:35 AM, Koen Vanoppen wrote:
Dear all,
Besides the fact that we as team where very happy about ovirt and the
community, there is a chance that we have to move to RHEV... Superiors
decisions...
Now my next obvious question is... IF this will be the case, can we move
all of our
- Original Message -
From: Michel Rode r...@b1-systems.de
To: users@ovirt.org
Sent: Wednesday, August 27, 2014 10:53:00 PM
Subject: [ovirt-users] Prestarted vms in a pool
Hi all,
we have a little problem here...we created a new pool with 10 vms and 4
of them as prestarted.
On Aug 28, 2014, at 09:56 , Omer Frenkel ofren...@redhat.com wrote:
- Original Message -
From: Michel Rode r...@b1-systems.de
To: users@ovirt.org
Sent: Wednesday, August 27, 2014 10:53:00 PM
Subject: [ovirt-users] Prestarted vms in a pool
Hi all,
we have a little problem
- Original Message -
From: Michal Skrivanek michal.skriva...@redhat.com
To: Omer Frenkel ofren...@redhat.com
Cc: Michel Rode r...@b1-systems.de, users@ovirt.org
Sent: Thursday, August 28, 2014 10:59:16 AM
Subject: Re: [ovirt-users] Prestarted vms in a pool
On Aug 28, 2014, at
On Aug 28, 2014, at 10:16 , Omer Frenkel ofren...@redhat.com wrote:
- Original Message -
From: Michal Skrivanek michal.skriva...@redhat.com
To: Omer Frenkel ofren...@redhat.com
Cc: Michel Rode r...@b1-systems.de, users@ovirt.org
Sent: Thursday, August 28, 2014 10:59:16 AM
Hi Aill,
We are creating two nics using the api, but it seems the second network is
not come up and the first one is working. The following xml is used to for
the nic creation
nic
interfacevirtio/interface
nameeth0/name
boot_protocolstatic/boot_protocol
mac
Hi OvirtKVM,
Here is the details :-
1. Ovirt :- 3.4
2. VM :- Centos 6.5
3. VM Disk Partition :- Based on LVM
4. Base Datastorage :- Gluster
I am able to expend the disk...but the disk expand doesn't touch the
partition table..so after expand all the existing partition remain with the
same disk
Hi All,
I am unable to assign the profile using the ovirt api code, the following
xml code is used for creating the nic
nic
interfacevirtio/interface
nameeth0/name
boot_protocolstatic/boot_protocol
mac address='.$ip-mac_address.'/
network
ip address='.$ip-mac_ip.'
Am 28.08.2014 09:27, schrieb David BERCOT:
Hello,
Well, I did not have success with my questions ;-) May be you have
considered they were too far from oVirt...
For the first one, after further research, I've found that it is OK
(GlusterFS over FC [SAN mode])...
But, about
On 08/28/2014 10:31 AM, Shanil S wrote:
Hi All,
I am unable to assign the profile using the ovirt api code, the
following xml code is used for creating the nic
nic
interfacevirtio/interface
nameeth0/name
boot_protocolstatic/boot_protocol
mac
On Thu, Aug 28, 2014 at 01:50:22PM +0530, Shanil S wrote:
Hi Aill,
We are creating two nics using the api, but it seems the second network is
not come up and the first one is working. The following xml is used to for
the nic creation
nic
interfacevirtio/interface
nameeth0/name
- Original Message -
From: Manfred Landauer manfred.landa...@fabasoft.com
To: users@ovirt.org
Sent: Thursday, August 14, 2014 6:29:21 PM
Subject: [ovirt-users] Migration failed due to Error: Fatal error during
migration
Hi all
When we try to migrate a VM on oVirt
On Thu, Aug 28, 2014 at 02:14:07PM +0200, Andy Michielsen wrote:
Dear all,
I need some help. I wanted to start a VM but got the following error.
[image: Inline afbeelding 1]
What's going on here ? How can I fix this.
does engine.log have any clues regarding the falure to find a valid
Hi,
I am currently testing oVirt 3.4.3 + gluster 3.5.2 for use in my relatively
small home office environment on a single host. I have 2 Intel hosts with
SSD and magnetic disk and one AMD host with only magnetic disk. I have
been trying to figure out the best way to configure my environment
On Aug 27, 2014, at 13:52 , Punit Dambiwal hypu...@gmail.com wrote:
Hi Itamar,
It's the same as i used and discussed in last reply...create the VM with 1GB
virtual template and expand the disk size after deployment...but the problem
here is disk will expand or resize...but it will not
Hi Ryan,
Should have replied to all, my bad.
See my answer embedded below:
- Original Message -
From: Ryan Groten ryan.gro...@stantec.com
To: Vered Volansky ve...@redhat.com
Sent: Thursday, August 28, 2014 5:50:12 PM
Subject: RE: [ovirt-users] How long can a disk snapshot exist for?
Hello Dan,
Nevermind. After 2 months I had some time to look at this problem again but
didn't remember I put the server in maintenance mode.
I put it in maintenance mode to install updates and doublecheck all
configuration and apparently I did something wright as it just works now.
Kind
Thanks that's exactly the explanation I was looking for.
-Original Message-
From: Vered Volansky [mailto:ve...@redhat.com]
Sent: August-28-14 9:29 AM
To: Groten, Ryan; users
Subject: Re: [ovirt-users] How long can a disk snapshot exist for?
Hi Ryan,
Should have replied to all, my bad.
Just to complete the answer, Red Hat Buys Inktank (CEPH).
http://techcrunch.com/2014/04/30/red-hat-buys-ceph-provider-inktank-for-175m-in-cash-to-beef-up-its-cloud-storage-offerings/
http://www.zdnet.com/red-hat-releases-inktank-ceph-enterprise-1-2-731694/
Hi.
I tried to start the connection novnc the new machine, but still the same.
Even if I imported the CA certificate and added it to the trusted
2014-08-27 14:50 GMT+02:00 Grzegorz Szypa grzegorz.sz...@gmail.com:
Hi.
I try do someting and I change to line in: /usr/share/novnc/include/rfb.js
I assume the same would apply in reverse.
Given our utter disappointment with Red Hat support (or more
accurately, the lack of it), we see no good reason to continue with RHEV
and will very likely switch to Ovirt when our current subscription runs
out. We've had far more support from this list
I'll try to answer some of these.1) its not a serious problem persay the issue is if one node goes down and you delete a file while the second node is down it will be restored when the second node comes back which may cause orphaned files where as if you use 3 servers they will use quorum to
Hi All,
I read this article...can this help...
https://catn.com/2013/06/03/resize-a-centos-virtual-machine-image/
Thanks,
Punit
On Thu, Aug 28, 2014 at 10:33 PM, Michal Skrivanek
michal.skriva...@redhat.com wrote:
On Aug 27, 2014, at 13:52 , Punit Dambiwal hypu...@gmail.com wrote:
Hi
Hi ,
I am also facing the same issue...
here is the engine logs :-
2014-08-29 09:27:45,432 INFO
[org.ovirt.engine.core.vdsbroker.vdsbroker.MigrateStatusVDSCommand]
(org.ovirt.thread.pool-6-thread-24) FINISH, MigrateStatusVDSCommand, log
id: 1f3e4161
2014-08-29 09:27:45,439 INFO
Hi,
I haven't try it on 3.53.4 it's work...
Thanks,
Punit
On Fri, Aug 29, 2014 at 4:13 AM, Grzegorz Szypa grzegorz.sz...@gmail.com
wrote:
Hi.
I tried to start the connection novnc the new machine, but still the same.
Even if I imported the CA certificate and added it to the trusted
Hi Dan,
I have attached the screenshot of the console, please check it.
--
Regards
Shanil
On Thu, Aug 28, 2014 at 4:46 PM, Dan Kenigsberg dan...@redhat.com wrote:
On Thu, Aug 28, 2014 at 01:50:22PM +0530, Shanil S wrote:
Hi Aill,
We are creating two nics using the api, but it seems
Hi Dan,
Please ignore the previous screenshot and check this.
--
Regards
Shanil
On Fri, Aug 29, 2014 at 8:49 AM, Shanil S xielessha...@gmail.com wrote:
Hi Dan,
I have attached the screenshot of the console, please check it.
--
Regards
Shanil
On Thu, Aug 28, 2014 at 4:46 PM, Dan
Hi Daniel,
Okay.. Thanks..
I will try and get back to you if any issues exists..
--
Regards
Shanil
On Thu, Aug 28, 2014 at 11:53 AM, Daniel Erez de...@redhat.com wrote:
- Original Message -
From: Doron Fediuck dfedi...@redhat.com
To: Shanil S xielessha...@gmail.com
Cc:
Hi All,
Is there any api methods to get the real time network usages and IO usages
os of each vm ? I tried it by using api/vms/$id/statistics but its not
getting the network and IO usages. Is it possible to get these details
using the api calls ?
--
Regards
Shanil
36 matches
Mail list logo
