I can add a rule into ipdates such as this
iptables -I INPUT -s 192.168.0.10 -p tcp -m tcp --dport 5666 -j ACCEPT
I can see the addition has succeeded with this
iptables-save > /etc/sysconfig/iptables
But a reboot of the Engine VM (not the Host) doesn't keep the new rule,
and I was expecting
I'm seeing this error "Migrating VM blah-blah because previous host
became non-operational. This appears in the WebUI under the task lists
and is getting annoying since it disrupts things like creating snapshots.
This migration is quite a feat on a single hosted engine installation
with only
I'm not an lvm expert, a quick search indicates either reboot or using
dmsetup to clear the entries
Alternately, you can check on https://www.redhat.com/archives/linux-lvm/ or
ask on the list.
On Mon, May 29, 2017 at 10:03 PM, Joel Diaz wrote:
> Good morning,
>
> Any
Sandro,
If & when one decides to "graduate" & use real hardware, what is the
install process?
Is the gluster part still automated or that has to be done manually?
Another question, what type of use cases & jobs is oVirt being deployed
in & how are people getting tech support?
On 2017-05-29
Good morning,
Any advice on how to remove those stale device mapper entries?
Thank you,
On Thu, May 25, 2017 at 12:52 PM, Joel Diaz wrote:
> Sahina,
>
> I believe you're correct regarding the stale devicemapper entries.
>
> Before this started happening, I added a new
Adding Nir, can you please have a look?
On Mon, May 29, 2017 at 2:15 PM, Moritz Baumann
wrote:
> Here is the vdsm.log from one node
>
> Cheers,
> Moritz
>
> ___
> Users mailing list
> Users@ovirt.org
>
On 29 May 2017 08:22, Sandro Bonazzola wrote:
> Hi, so if I understood correctly, you're trying to work on a single host
> deployment right?
> Or are you just trying to replace the bare metal all-in-one 3.6 in a context
> with more hosts?
> If this is the case, can you share your use case? I'm
Hi,
after an upgrade I get the following errors in the web gui:
VDSM ovirt-node01 command SpmStatusVDS failed: (13, 'Sanlock resource
read failure', 'Permission denied')
VDSM ovirt-node03 command HSMGetAllTasksStatusesVDS failed: Not SPM
These messages happen from all nodes.
I can
On Fri, May 26, 2017 at 1:44 PM, Andy Gibbs wrote:
> Hi,
>
> I am trying to install a new server with oVirt. I have previously had
> relatively good success with the all-in-one plugin on oVirt 3.6, but it is
> time to move to newer things and I am trying to get oVirt
On Mon, May 29, 2017 at 1:14 PM, Andrew Dent wrote:
> Hi
>
> I would like to add rules into the iptables of the Hosted Engine VM in
> Ovirt.
> I am wanting to monitor the Ovirt Engine using Nagios -> NRPE and I would
> like to open port 5666
>
> the version is oVirt Engine
On Fri, May 26, 2017 at 9:09 PM, Alan Griffiths
wrote:
> Hi,
>
> I don't seem to be able create thin provision disks when importing from
> KVM. Once import is complete the disk allocation policy is reported as
> thin, but the actual size is in fact slightly larger than
Hi
I would like to add rules into the iptables of the Hosted Engine VM in
Ovirt.
I am wanting to monitor the Ovirt Engine using Nagios -> NRPE and I
would like to open port 5666
the version is oVirt Engine Version: 4.1.1.8-1.el7.centos
I have tried using the normal process for iptables
Seems to be wokring. Thank you !
-Ursprüngliche Nachricht-
Von: Piotr Kliczewski [mailto:piotr.kliczew...@gmail.com]
Gesendet: Montag, 29. Mai 2017 10:41
An: Sven Achtelik
Cc: Oved Ourfali ; users@ovirt.org
Betreff: Re: [ovirt-users] Timeout
Thank you for the link.
I will definitely check it out.
On 2017-05-29 04:33, Sandro Bonazzola wrote:
On Mon, May 29, 2017 at 10:21 AM, wrote:
I assume people are using oVirt in production?
Sure, I was just wondering why you were running in nested
virtualization :-)
Sven,
This config value is hidden. You can update it by running:
su - postgres -c "psql engine -c "UPDATE vdc_options set option_value
= '' where option_name =
'vdsHeartbeatInSeconds'""
Please note that the default value is 30 seconds.
and next you need to restart your engine.
Thanks,
Piotr
On Mon, May 29, 2017 at 10:21 AM, wrote:
> I assume people are using oVirt in production?
Sure, I was just wondering why you were running in nested virtualization :-)
Being your use case a "playground" environment, I can suggest you to have a
look at Lago
oVirt Engine Version: 4.1.2.2-1.el7.centos
-Ursprüngliche Nachricht-
Von: Piotr Kliczewski [mailto:piotr.kliczew...@gmail.com]
Gesendet: Montag, 29. Mai 2017 10:30
An: Sven Achtelik
Cc: Oved Ourfali ; users@ovirt.org
Betreff: Re:
Sven,
Which version of ovirt-engine do you use?
Thanks,
Piotr
On Mon, May 29, 2017 at 10:26 AM, Sven Achtelik wrote:
> Hi Piotr,
>
> I can't find that in the list of variables to set if I do an "engine-config
> -a" Is this something I have to setup first ?
>
> Thank
Hi Piotr,
I can't find that in the list of variables to set if I do an "engine-config -a"
Is this something I have to setup first ?
Thank you,
Sven
-Ursprüngliche Nachricht-
Von: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] Im Auftrag von
Sven Achtelik
Gesendet:
I assume people are using oVirt in production?
On 2017-05-29 04:13, Sandro Bonazzola wrote:
On Mon, May 29, 2017 at 12:12 AM, wrote:
http://community.redhat.com/blog/2013/08/testing-ovirt-3-3-with-nested-kvm/
[1]
I have one CentOS7 host (physical) & 3x oVirt
On Fri, May 26, 2017 at 1:44 PM, Andy Gibbs wrote:
> Hi,
>
> I am trying to install a new server with oVirt. I have previously had
> relatively good success with the all-in-one plugin on oVirt 3.6, but it is
> time to move to newer things and I am trying to get oVirt
For now, it is just for me to learn.
If I like the solution, I will then build a POC with "real" hardware
(which I already have).
Then I can deploy at my colo for clients.
On 2017-05-29 04:13, Sandro Bonazzola wrote:
On Mon, May 29, 2017 at 12:12 AM, wrote:
On Mon, May 29, 2017 at 12:12 AM, wrote:
> http://community.redhat.com/blog/2013/08/testing-ovirt-3-3-
> with-nested-kvm/
>
> I have one CentOS7 host (physical) & 3x oVirt nodes 4.1.2 (these are vm's).
>
Hi, can you please share the use case for this setup?
> I have
Per this blog post
http://www.ovirt.org/blog/2017/04/up-and-running-with-ovirt-4-1-and-gluster-storage/
I already deleted "ifcfg-eth0.bak"
The first time I ran the setup, I had an error, so I deleted that file
on all 3 nodes.
On 2017-05-29 03:39, Simone Tiraboschi wrote:
It seams that VDSM
It seams that VDSM is not correctly able to crete the managem bridge since
NetworkManager reports an error about
/etc/sysconfig/network-scripts/ifcfg-eth0.bak
Did you manually copied it? could you please move it away?
May 28 23:45:13 ovirt-node1.lab vdsm[13288]: vdsm jsonrpc.JsonRpcServer
ERROR
On 2017-05-29 03:19, Simone Tiraboschi wrote:
Hi,
could you please attach vdsm and hosted-engine-setup log files?
On Mon, May 29, 2017 at 9:15 AM, wrote:
Trying to complete the hosted engine setup, I get this Error
message:
Failed to execute stage 'Closing up': The
On 2017-05-29 03:19, Simone Tiraboschi wrote:
Hi,
could you please attach vdsm and hosted-engine-setup log files?
On Mon, May 29, 2017 at 9:15 AM, wrote:
Trying to complete the hosted engine setup, I get this Error
message:
Failed to execute stage 'Closing up': The
Hi,
could you please attach vdsm and hosted-engine-setup log files?
On Mon, May 29, 2017 at 9:15 AM, wrote:
> Trying to complete the hosted engine setup, I get this Error message:
> Failed to execute stage 'Closing up': The VM is not powering up: please
> check VDSM
Trying to complete the hosted engine setup, I get this Error message:
Failed to execute stage 'Closing up': The VM is not powering up: please
check VDSM logs
Hosted Engine deployment failed: this system is not reliable, please
check the issue,fix and redeploy
I will restart the setup & see
On Mon, May 29, 2017 at 9:32 AM, Yedidyah Bar David wrote:
> On Mon, May 29, 2017 at 6:52 AM, Leni Kadali Mutungi
> wrote:
>> I have read what is in the README.adoc and done all of it.
>> Unfortunately, even with BUILD_ALL_USER_AGENTS=0, my computer would
On Mon, May 29, 2017 at 6:52 AM, Leni Kadali Mutungi
wrote:
> I have read what is in the README.adoc and done all of it.
> Unfortunately, even with BUILD_ALL_USER_AGENTS=0, my computer would
> still freeze. I had to opt to not build the gwt ui instead. I hope
> it's not
Hi,
Could you share your volume-info output and also the brick logs?
-Krutika
On Fri, May 26, 2017 at 4:57 PM, wrote:
> Hi,
>
> I updated glusterfs:
> glusterfs-client-xlators-3.8.12-1.el7.x86_64
> glusterfs-cli-3.8.12-1.el7.x86_64
> glusterfs-api-3.8.12-1.el7.x86_64
>
32 matches
Mail list logo