On Thu, Aug 5, 2021 at 1:44 AM wrote:
> I'm attempting to upload an ISO that is approximately 9GB in size. I've
> succssfullly started th upload process via the oVirt Management
> Console/Disk. The upload started however, it now has a status of "Paused
> by System". My storage type is set to
Appreciate all for sharing the valuable information.
1. I am downloading centos 8 as the Python Ovirt SDK installation says
it works on Centos 8 and Need to setup a VM with this OS and install
ovirt Python SDK on this VM. The requirement is that this
Centos 8 VM should able to
*should be 2
On Thu, Aug 5, 2021 at 7:42, Strahil Nikolov wrote:
when you use 'remove-brick replica 1', you need to specify the removed bricks
which should be 1 (data brick and arbiter).Something is mising in your
description.
Best Regards,Strahil Nikolov
On Thu, Aug 5, 2021 at
when you use 'remove-brick replica 1', you need to specify the removed bricks
which should be 1 (data brick and arbiter).Something is mising in your
description.
Best Regards,Strahil Nikolov
On Thu, Aug 5, 2021 at 7:33, Strahil Nikolov via Users
wrote:
First of all you diddn't 'mkfs.xfs -i size=512' . You just 'mkfs.xfs' , whis is
not good and could have caused your VM problems. Also , check with xfs_info the
isize of the FS.
You have to find the uuid of the disks of the affected VM.Then go to the
removed host,and find that file -> this is
I have configured a host with pci passthrough for GPU pass through. Using
this knowledge I went ahead and configured nvme SSD pci pass through. On
the guest, I partitioned and mounted the SSD without any issues.
Searching google for this exact setup I only see results about "local
storage" where
Hello,
Is there a way to keep Mellanox OFED and oVirt/RHV playing nice with each other?
The real issue is regarding GlusterFS. It seems to be a Mellanox issue, but I
would like to know if there's something that we can do make both play nice on
the same machine:
[root@rhvepyc2 ~]# dnf update
I'm attempting to upload an ISO that is approximately 9GB in size. I've
succssfullly started th upload process via the oVirt Management Console/Disk.
The upload started however, it now has a status of "Paused by System". My
storage type is set to NFS Data.
Is something happing the back
The storage domain lists the type as "Local on Host". It's been a while since I
set it up, but I thought the engine deployment had an option for local storage.
The VM's reside in a directory under /opt on the Physical Host.
https://i.postimg.cc/z3mMNj3J/Capture.png
I forget which version I
On Tue, Aug 3, 2021 at 3:18 PM wrote:
> Yes - local as in 5400 RPM SATA - standard desktop, slow storage.. :)
>
> It's still 'slow' being 5400 RPM SATA, but after setting the new VM to
> 'VirtIO-SCSI' and loading the driver, the performance is 'as expected'. I
> don't notice with with the Linux
On Tue, Aug 3, 2021 at 12:24 PM Tony Pearce wrote:
> I believe "local" in this context is using the local ovirt Host OS disk as
> VM storage ie "local storage". The disk info mentioned "WDC WD40EZRZ-00G" =
> a single 4TB disk, at 5400RPM.
>
> OP the seek time on that disk will be high. How many
On Tue, Aug 3, 2021 at 3:11 AM wrote:
> I've installed ovirt on the my server (HPDL380Gen10) and was able to start
> the configuration process on the local machine. I'm tried to access the
> ovirt console remotely via the web however I've had no success. I'm using
> the same URL that is used
On Tue, Aug 3, 2021 at 11:22 PM Nicolás wrote:
> Hi,
>
> As I see this is an issue hard to get help on, I'll ask it otherwise:
>
> Alternatively to backup and restore, is there a way to migrate an
> oVirt-manager installation to other machine? We're trying to move the
> manager machine since the
Thanks for your reply,
[root@server ~]# tar tvf
/usr/share/ovirt-engine-appliance/ovirt-engine-appliance-4.4-20210720124053.1.el8.ova
-rw-r--r-- root/root 3725 2021-07-20 05:29
master/vms/f2b9699d-5693-46a4-93ff-632c051dedef/f2b9699d-5693-46a4-93ff-632c051dedef.ovf
-rwxr-xr-x root/root
I have recently added a fresh installed host on 4.4, with 3 x nvidia gpu's
which have been passed through to a guest VM instance. This went very
smoothly and the guest can use all 3 host GPUs.
The next thing we did was to configure "local storage" so that the single
guest instance can make use of
check the logs /var/log/vdsm/import//x by loging into specific host where
the vm import getting, if there is a vcenter time out happened, follow this
https://bugzilla.redhat.com/show_bug.cgi?id=1848862
It looks like virt-v2v creates too many HTTP sessions to the VCenter and it
results in
On Wed, 4 Aug 2021, Sketch wrote:
What doesn't work is live migration of running VMs between hosts running
4.4.7 (or 4.4.6 before I updated) when their disks are on ceph. It appears
that vdsm attempts to launch the VM on the destination host, and it either
fails to start or dies right after
Hi.
I have created a new vmware provider to connet to my vmware esxi node.
But I have this problem.
If I choose to import a vm from that provider, the process always fails.
But the errror message is generic:
"failed to import vm xyz to Data Center Default, Cluster Default"
I have tried to
On Wednesday, 4 August 2021 03:54:36 CEST KK CHN wrote:
> On Wed, Aug 4, 2021 at 1:38 AM Nir Soffer wrote:
> > On Tue, Aug 3, 2021 at 7:29 PM KK CHN wrote:
> > > I have asked our VM maintainer to run the command
> > >
> > > # virsh -r dumpxml vm-name_blah//as Super user
> > >
> > > But no
here os the vdsm.log from the SPM
there is a report for the second disk of the vm but the first (the one which
failes to merge does not seem to be anywhere)
2021-08-03 15:51:40,051+0300 INFO (jsonrpc/7) [vdsm.api] START
getVolumeInfo(sdUUID=u'96000ec9-e181-44eb-893f-e0a36e3a6775',
hello Benny and thank you for the quick response:
this is the vdsm log:
2021-08-03 15:50:58,655+0300 INFO (jsonrpc/3) [storage.VolumeManifest]
96000ec9-e181-44eb-893f-e0a36e3a6775/205a30a3-fc06-4ceb-8ef2-018f16d4ccbb/7611ebcf-5323-45ca-b16c-9302d0bdedc6
info is {'status': 'OK', 'domain':
21 matches
Mail list logo
