It seems I haven't learned my lesson with upgrading via GUI.
For some reason my server crashed during use of the GUI Upgrade method and it
looks like maybe it did not complete or the like.
3NodeGluster
I then noticed that I had actually upgrading a single node to the 4.5.1 Testing
Version, that
1. Put the engine in a match block where passowrd authentication is possible.
2. Firewalld rate limit has a burst effect so ot will never limit on the third
attempt. Put a higher value like 10-15 and you will notice that it works.
Usually infrastructure like oVirt ahould not be exposed to the
Hello,
1.
Is it possible to disable ssh root password authentication in a working oVirt
cluster without any problems? (host and ovirt-engine)
/etc/ssh/sshd_config
PasswordAuthentication no
The SSH public authentication key is set on the host.
2.
I tried setting ssh rate limit using
THis is for version oVirt 4.5.0.8-1. Sorry left out the exact release.
Don
On Fri, Jun 10, 2022 at 11:41 AM Don Dupuis wrote:
> Hello
> I have a RHEL 8.6 based hypervisor with a Mellanox ConnectX-5 IB card
> installed with SRIOV enabled. The host device I am assigning is
> pci__af_00_2.
Hello
I have a RHEL 8.6 based hypervisor with a Mellanox ConnectX-5 IB card
installed with SRIOV enabled. The host device I am assigning is
pci__af_00_2. The card is working as I can talk to other infiniband
interfaces on other servers. Below is the output of lspci.
3b:00.0 Ethernet
That can happen if the builtin password for the engine database's
grafana user changes, or if you manually restore the grafana database
from a backup.
You could try resetting the password by copying it back into the data
source config in grafana's UI. (You'll need admin privlieges for
grafana to
6 matches
Mail list logo
