Hi,
In this morning I have got a lot of similar messages to console:
2014-Nov-17, 03:21
Detected conflict in hook set-POST-30samba-set.sh of Cluster r710cluster1.
2014-Nov-17, 03:21
Detected conflict in hook stop-PRE-29CTDB-teardown.sh of Cluster r710cluster1.
2014-Nov-17, 03:21
Hi!
I have a little problem with my 3.5.
I have a not-exist gluster volume that is mounted on a node.
Some weeks ago it's really existed, but it has been deleted.
After node restart or a single service restart it's always shown as mounted on
one node.
How can I refresh the good
Hi,
Did you set your bond devices and IP addresses via ovirt's network management,
or by hand on the nodes?
In my experiences you need to set up ip addresses on the node's network
interface via ovirt' management, because it won't working.
Tibor
- Eredeti üzenet -
Hi,
I have
Hi,
I have a 3 node gluster based cluster. There are 3x3 Nic with bonding.
Sometimes the management is very slow because high gluster traffic.
Is it possible to separate ovirtmgmt network from glusterfs traffic?
I have only one interface (ovirtmgmt) for all of services (migration, etc).
I
Hi,
After yum update just need a service glusterd restart?
Is it possible on a active node that use gluster fs?
Thank you.
Tibor
On 11/12/2014 12:58 PM, Demeter Tibor wrote:
Hi,
I see that glusterfs 3.6 has released.
What is the official way to upgrade this under a production
Hi!
I thought this might be because the balloon driver needs the guest agent
to work and obviously this is not loaded yet. I assume further
ballooning resumes normal operation later on?
No. I get this message continuously. But only on this guest of 9.
I have loaded virtio_balloon
is all the other guest-agent reported information displayed?
e.g. FQDN, IP…
just to rule out communication between vdsm and guest-agent
Yes, all information are displayed.
Thanks,
Tibor
Thanks,
michal
[root@guest1~]# rpm -q ovirt-guest-agent
Hi,
I see that glusterfs 3.6 has released.
What is the official way to upgrade this under a production ovirt cluster?
Can I use the yum update command or I need to switch to the host to
maintenance and select reinstall button?
Thanks
Tibor
___
Hi,
I have a lot of centos 6 based vms and I have install ovirt guest agent for
those vms.
But two vm always say The balloon driver on xxxvm on hostX is requested but
unavailable
I did check the virtio_balloon module are loaded on vms.
Anybody can me help?
Thanks in advance
Tibor
Hello,
At last night I have sussessfully migrated my vms from kvm to gluster based
ovirt 3.5.
It sounds good, but the results was terrible: The glusterfs (two node
replicated) is too slow for our vms. It is a very big problem, so I have
looking for soultion.
I don't know why but glusterfsd
Hi,
I have a question.
Need I rebuild and install the redhat's qemu-kvm for ovirt 3.5 if I wanna
working live migration function?
At this moment it is not working for me.
Thanks
Tibor
___
Users mailing list
Users@ovirt.org
Demeter Tibor
Email: tdemeter @itsmart.hu
Skype: candyman_78
Phone: +36 30 462 0500
Web : www.it smart.hu
Hi,
I have centos 6.6.
There is a two node cluster that based on a gluster based storage.
The node0 is an all-in-one install, the node1 is a single host.
It is stange, because
Hi,
After I did a restart on node0 the live migration does working fine.
I don't know what was the reason of this.
Thank you for responses.
Tibor
- Eredeti üzenet -
Demeter Tibor
Email: tdemeter @itsmart.hu
Skype: candyman_78
Phone: +36 30 462 0500
Web : www.it
Hi,
Could somebody know, how long will be supported ovirt on centos 6.5 as
host/portal server?
I would like to planning for long time (2-3 years) for my production
environment.
Thanks,
Tibor
___
Users mailing list
Users@ovirt.org
Hello all,
I've created a self-hosted ovirt engine with two node, but on the last steps
the engine-setup could not attach the node to the default cluster.
I think it was because I have different services on different vlans.
I have vlan100 for glusterfs and vlan101 for vdsm hosts with
Hi,
I did a yum update but same.
I don't know why, but I have a supervdsm.log but since the update it did not
changed.
Also I have 3 vlan and 3 bonded interface, is it cause same problems?
Thanks
Tibor
- Eredeti üzenet -
Il 02/10/2014 21:40, Demeter Tibor ha scritto:
Hi
: Invalid
flag provided.
okt 03 16:44:25 node0.itsmart.cloud systemd[1]: supervdsmd.service: main
process exited, code=exited, status=1/FAILURE
okt 03 16:44:25 node0.itsmart.cloud systemd[1]: Unit supervdsmd.service entered
failed state.
What the problem with my partiton?
Thanks
Demeter Tibor
regards,
Demeter Tibor
- Eredeti üzenet -
I ran a service restart.
The vdsmd and supervdsmd service cannot run.
[root@node0 vdsm]# service supervdsmd status
Redirecting to /bin/systemctl status supervdsmd.service
supervdsmd.service - Auxiliary vdsm service for running
Hi,
I've trying to install a hosted engine on centos7 with 3.5 rc3, but it was
failed.
[root@node0 network-scripts]# hosted-engine --deploy
[ INFO ] Stage: Initializing
Continuing will configure this host for serving as hypervisor and create a VM
where you have to install oVirt Engine
AM, Demeter Tibor wrote:
Hi,
Is there any method in glusterfs, like raid-5?
I have three node, each node has 5 TB of disk. I would like utilize all
of
space with redundancy, like raid-5.
If it not possible, can I make raid-6 like redundanci within three node
Hi,
Is there any method in glusterfs, like raid-5?
I have three node, each node has 5 TB of disk. I would like utilize all of
space with redundancy, like raid-5.
If it not possible, can I make raid-6 like redundanci within three node? (two
brick/node?).
Thanks in advance,
Tibor
Hi,
I would make a self-hosted ovirt3.5 based on glusterfs, so the hosts will be
the main storage.
I followed up the
http://community.redhat.com/blog/2014/05/ovirt-3-4-glusterized/ .
I have a question about it.
Does really need the ctdb service for this? Is the localhost trick won't
On shared glusterfs.
Tibor
- Eredeti üzenet -
On 09/03/2014 08:46 AM, Demeter Tibor wrote:
Hi,
Firstly, I don't want make an import domain. I just want to make a vm with
same parameters (disk size,ram, etc) then replace the disk images with our
original disks.
on which
Hi,
So, what do you recommend for glusterfs?
I have try out on local storage with native qcow2 format and the vm still could
start, but does not boot. It sad no bootable device found.
I convert to raw and it could boot without problems.
I will try out on my glusterfs based storage soon.
Thanks,
Hi,
I have a lot of qcow2 based vm (from my kvm box) disks and I would like to copy
to ovirt them.
Ovirt can use qcow2 based images directly or I need to convert to raw in any
case?
I don't have long time for migration, the conversion process takes a long time.
Thanks in advance
Tibor
Hi,
Firstly, I don't want make an import domain. I just want to make a vm with same
parameters (disk size,ram, etc) then replace the disk images with our original
disks.
Tibor
- Eredeti üzenet -
On 09/02/2014 06:21 PM, Demeter Tibor wrote:
Hi,
I have a lot of qcow2 based vm
Hi,
I would like to make a four-node gluster based cluster, but I don't have
enought hdd. I just wondering, on the hosts (not on the portal) I won't use
raid for the main system (os).
I have disks only for bricks. I will give one disk for the os, and one disk for
gluster brick per server.
Hi,
Thank you for you reply.
Is it better than a replica beetwen two node?
My plan is one server for ovirt (based on hw raid10) and two server for
replication.
Is better with 3 servers?
Also, is 1GBe NIC will be enought for performance? I would use bonding.
Thanks
Demeter Tibor
Hi,
We have a production environment with KVM+centos6 and we want to switch to
ovirt.
At this moment we have 12 VM on three independent server.
This VMs uses the local disks of servers, we don't have a central storage.
currently we have for ovirt
- Two Dell R710 with 128 gigs of ram.
- A
AM, Demeter Tibor wrote:
Dear listmembers,
I have created a test environment for ovirt via four pc and a server.
I have two datacenter on the main server:
- a local datacenter on the server
- a gluster based datacenter by the four dekstop pc
2 weeks ago
.
- Eredeti üzenet -
Sorry for the late reply - was this solved?
--
Didi
- Original Message -
From: Demeter Tibor tdeme...@itsmart.hu
To: Yedidyah Bar David d...@redhat.com
Cc: users@ovirt.org, Yair Zaslavsky yzasl...@redhat.com
Sent: Tuesday, June 24, 2014 7:36:31 PM
:
F19glusters:
Cannot remove VM: Storage Domain cannot be accessed.
-Please check that at least one Host is operational and Data Center state is
up.
So it is an vicious circle
Tibor
- Eredeti üzenet -
On 07/09/2014 01:45 AM, Demeter Tibor wrote:
Dear listmembers,
I have created
Dear listmembers,
I have created a test environment for ovirt via four pc and a server.
I have two datacenter on the main server:
- a local datacenter on the server
- a gluster based datacenter by the four dekstop pc
2 weeks ago someone took my pc-s (for doing other things:)
I am could
/VDSM-Hooks/hostusb
26.06.2014 21:37, Demeter Tibor пишет:
Hi,
Is there any possibility for using the host's usb ports for a guest?
I need to migrate a physical windows based machine that using usb tokens.
Thanks in advance.
Tibor
Hi,
Is there any possibility for using the host's usb ports for a guest?
I need to migrate a physical windows based machine that using usb tokens.
Thanks in advance.
Tibor
___
Users mailing list
Users@ovirt.org
Hi,
Thank you for your help.
Please help me in psql how can I drop the second record because I don't know
how can I made it.
Best Regards,
Demeter Tibor
- Eredeti üzenet -
- Original Message -
From: Demeter Tibor tdeme...@itsmart.hu
To: Yedidyah Bar David d
Hi,
I have two of centos KVM servers and there are a lot of VMs.
I would like switch to ovirt.
I know, I need to make an import domain where I need to store the VM-s before
importing to an ovirt domain. I need to make an import domain in any case?
My problem is the long convertation
Hi,
I got this:
-bash-4.1$ psql engine
Password:
psql: FATAL: database engine does not exist
Is this mean, my engine database does not exist?
Thanks,
Tibor
- Eredeti üzenet -
Hi,
- Original Message -
From: Demeter Tibor tdeme...@itsmart.hu
To: Yedidyah Bar David d
-
Hi,
- Original Message -
From: Demeter Tibor tdeme...@itsmart.hu
To: Yedidyah Bar David d...@redhat.com
Cc: users@ovirt.org
Sent: Wednesday, June 18, 2014 7:37:24 PM
Subject: Re: [ovirt-users] Upgrade to 3.4.2 failed
Hi,
Yes, I have a FreeIPA server
without ovirt?
- If no, then how can I remove the ipaserver from ovirt configuration ?
Thank in advance.
Tibor
- Eredeti üzenet -
- Original Message -
From: Demeter Tibor tdeme...@itsmart.hu
To: users@ovirt.org
Sent: Tuesday, June 17, 2014 3:11:54 PM
Subject: [ovirt-users
Hi,
I just did an upgrade to my 3.4.0 box.
I did a yum update and an engine-setup
After the package downloading process got this:
[ INFO ] Yum Verify: 14/14: ovirt-engine.noarch 0:3.4.0-1.el6 - ud
[ INFO ] Stage: Misc configuration
[ INFO ] Backing up database
Hi,
Can I redirect the vm host's usb and serial ports to the guests?
It is very important me, because we need to virtualize a physical host that use
hardware tokens (usb hw key).
I didn't find any option for this.
Thanks in advance
Best regards,
Tibor
Dear members,
We made a test plaform for testing ovirt 3.4 features. We got four amd x2 4400+
machine with 2 gigs of ram and build a gluster based cluster. I set up an
amd-G2 based cluster.
I rebuild and installed the qemu-kvm-rhev package (
and gluster logs from
both the create snapshot and live migration actions.
Thanks,
Dafna
On 04/10/2014 05:59 PM, Demeter Tibor wrote:
Dear members,
We made a test plaform for testing ovirt 3.4 features. We got four amd
x2 4400+ machine with 2 gigs of ram and build a gluster based
Hi,
Thank for the responses, the kerberos SRV records sloved this problem.
Thx,
Demeter Tibor
- Eredeti üzenet -
One more piece of info - in my case ovirt-engine server is joined to my local
domain. During joining procedure FreeIPA creates needed records for this
server. I am
Hi,
I made an IPA server for testing purposes, but I cannot add to ovirt 3.4. The
IPA server seems to be working good.
When I add IPA to ovirt, I get this error mesage:
[root@ovirttest etc]# engine-manage-domains add --domain=itsmart.local
--user=admin --provider=ipa
101 - 146 of 146 matches
Mail list logo