[Users] vm-fex paramters
Hi all Does someone success to make the vm-fex plugin to work ? I've setup the engine with the vmfex parameter and on my VM I tried to setup the options but I always have a error, vdsm plugin doesn't recognive my syntaxe. 'mac':'profile' mac:profile 'mac':profile I follow these tutos : http://digitalcritical.wordpress.com/tag/vmfex/ http://wiki.ovirt.org/VDSM-Hooks/vmfex -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vm-fex paramters
On Wed, Jan 02, 2013 at 10:37:03AM +0100, Kevin Maziere Aubry wrote: Hi all Does someone success to make the vm-fex plugin to work ? I've setup the engine with the vmfex parameter and on my VM I tried to setup the options but I always have a error, vdsm plugin doesn't recognive my syntaxe. 'mac':'profile' mac:profile 'mac':profile Is there an error line in your vdsm.log? Could you copy the (very long) log line with call vmCreate to the mailing list? I follow these tutos : http://digitalcritical.wordpress.com/tag/vmfex/ http://wiki.ovirt.org/VDSM-Hooks/vmfex ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vm-fex paramters
- Original Message - From: Kevin Maziere Aubry kevin.mazi...@alterway.fr To: users@ovirt.org Sent: Wednesday, 2 January, 2013 11:37:03 AM Subject: [Users] vm-fex paramters Hi all Does someone success to make the vm-fex plugin to work ? I've setup the engine with the vmfex parameter and on my VM I tried to setup the options but I always have a error, vdsm plugin doesn't recognive my syntaxe. 'mac':'profile' mac:profile 'mac':profile I follow these tutos : http://digitalcritical.wordpress.com/tag/vmfex/ http://wiki.ovirt.org/VDSM-Hooks/vmfex Hi Kevin, Where did you download the hook from? -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Regards, Dan Yasny Red Hat Israel +972 9769 2280 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vm-fex paramters
Hi I get the plugin from here : yum install http://resources.ovirt.org/releases/nightly/rpm/Fedora/17/noarch/vdsm-hook-vmfex-4.10.3-0.41.gitad916c7.fc17.noarch.rpm The error are : Thread-801738::DEBUG::2013-01-02 10:35:24,568::__init__::1249::Storage.Misc.excCmd::(_log) FAILED: err = 'vmfex: starting to edit VM \nvmfex: customProperty: \'00:1a:4a:1f:96:01\':\'p1p\'\nvmfex: ERROR Traceback (most recent call last):\n File /usr/libexec/vdsm/hooks/before_vm_start/50_vmfex, line 174, in module\nvmfexd = ast.literal_eval(vmfex)\n File /usr/lib64/python2.7/ast.py, line 49, in literal_eval\nnode_or_string = parse(node_or_string, mode=\'eval\')\n File /usr/lib64/python2.7/ast.py, line 37, in parse\nreturn compile(source, filename, mode, PyCF_ONLY_AST)\n File unknown, line 1\n\'00:1a:4a:1f:96:01\':\'p1p\'\n ^\nSyntaxError: invalid syntax\n\n'; rc = 2 SyntaxError: invalid syntax Where p1p is my UCS profile. Kévin 2013/1/2 Dan Yasny dya...@redhat.com - Original Message - From: Kevin Maziere Aubry kevin.mazi...@alterway.fr To: users@ovirt.org Sent: Wednesday, 2 January, 2013 11:37:03 AM Subject: [Users] vm-fex paramters Hi all Does someone success to make the vm-fex plugin to work ? I've setup the engine with the vmfex parameter and on my VM I tried to setup the options but I always have a error, vdsm plugin doesn't recognive my syntaxe. 'mac':'profile' mac:profile 'mac':profile I follow these tutos : http://digitalcritical.wordpress.com/tag/vmfex/ http://wiki.ovirt.org/VDSM-Hooks/vmfex Hi Kevin, Where did you download the hook from? -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Regards, Dan Yasny Red Hat Israel +972 9769 2280 -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] No spice connection - Remote-Viewer quits after a few seconds
Hi Dennis, this log isn't exactly helpful either. :( Spicec just quits before it could receive any connection info from the plugin... Could you try to set another variable: SPICEC_LOG_LEVEL=0 and find spicec log (also in %temp%)? David Dennis Böck píše v Čt 27. 12. 2012 v 14:12 +: Hi David, here is my %temp%/low/spicex.log (%temp%/spicex.log is not updated!), after setting the system variable spicex_debug_level=0: 1356616807 INFO [4944:5044] spicex_init_logger: started 1356616807 DEBUG [4944:5044] COSpiceX::put_DynamicMenu: DynamicMenu 1356616807 INFO [4944:5044] COSpiceX::put_FullScreen: New FullScreen request newVal=0x0 1356616807 DEBUG [4944:5044] COSpiceX::Connect: Running spicec (C:\Users\Dennis\AppData\Local\virt-viewer\bin\remote-viewer.exe --spice-controller) 1356616807 INFO [4944:5044] COSpiceX::Connect: spicec pid 5996 1356616809 DEBUG [4944:5044] COSpiceX::Connect: connecting to spice client's pipe 1356616814 ERROR [4944:5044] COSpiceX::Connect: failed to connect to spice client pipe Best regards Dennis Von: David Jaša [dj...@redhat.com] Gesendet: Dienstag, 4. Dezember 2012 12:16 An: Einav Cohen Cc: Dennis Böck; users@oVirt.org Betreff: Re: [Users] No spice connection - Remote-Viewer quits after a few seconds Einav, Dennis's previous logs suggest that he's using spicex/IE/windows, not xpi/firefox/linux. Dennis, could you go through my last week conversation with Karli Sjöberg and repeat the debugging steps described there? David Einav Cohen píše v Po 03. 12. 2012 v 14:52 -0500: Hi Dennis, We need some more information that can be useful to us in order to try solving the problem. Can you please follow the instructions below for getting more detailed logs and reply with the results? 1. Set spice-xpi log level to DEBUG (for versions 2.8, modify logger.ini). 2. Verify which client is running (we should get that from 1), e.g. by using top, or checking alternatives. 3. Getting version: rpm -q spice-xpi virt-viewer spice-client 4. client/remote-viewer logs: For spicec, there should be a file ~/.spicec/spicec.log For remote-viewer: In order to also get log messages of remote-viewer, run firefox from shell. For debug level log messages, the following environment variables should be set, for example $ export SPICE_DEBUG=1 $ export G_DEBUG_MESSAGES=all $ firefox Thanks, Einav - Original Message - From: Dennis Böck den...@webdienstleistungen.com To: Itamar Heim ih...@redhat.com Cc: users@oVirt.org users@ovirt.org Sent: Sunday, December 2, 2012 5:28:58 PM Subject: Re: [Users] No spice connection - Remote-Viewer quits after a few seconds I have the same problem, if I try to connect from admin portal. -Ursprüngliche Nachricht- Von: Itamar Heim [mailto:ih...@redhat.com] Gesendet: Samstag, 24. November 2012 23:47 An: Dennis Böck Cc: users@oVirt.org Betreff: Re: [Users] No spice connection - Remote-Viewer quits after a few seconds On 11/23/2012 11:04 PM, Dennis Böck wrote: Here are some logs: is the same working from admin portal? 1351785267 INFO [4504:4560] spicex_log_cleanup: done 1351785268 INFO [3788:5440] spicex_log_cleanup: done 1351867007 INFO [4868:4916] spicex_init_logger: started 1351867007 INFO [4868:4916] COSpiceX::put_FullScreen: New FullScreen request newVal=0x0 1351867007 INFO [4868:4916] COSpiceX::Connect: spicec pid 4948 1351867013 ERROR [4868:4916] COSpiceX::Connect: failed to connect to spice client pipe 1351867038 INFO [4868:4916] COSpiceX::put_FullScreen: New FullScreen request newVal=0x0 1351867038 INFO [4868:4916] COSpiceX::Connect: spicec pid 2732 1351867043 ERROR [4868:4916] COSpiceX::Connect: failed to connect to spice client pipe 1351867169 INFO [4868:4916] spicex_log_cleanup: done 1353687854 INFO [4568:2008] spicex_init_logger: started 1353687854 INFO [4568:2008] COSpiceX::put_FullScreen: New FullScreen request newVal=0x0 1353687854 INFO [4568:2008] COSpiceX::Connect: spicec pid 5776 1353687860 ERROR [4568:2008] COSpiceX::Connect: failed to connect to spice client pipe 1353687901 INFO [3064:6084] spicex_init_logger: started 1353687901 INFO [3064:6084] COSpiceX::put_FullScreen: New FullScreen request newVal=0x0 1353687901 INFO [3064:6084] COSpiceX::Connect: spicec pid 1576 1353687906 ERROR [3064:6084] COSpiceX::Connect: failed to connect to spice client pipe 1353687928 INFO [3064:6084] COSpiceX::put_FullScreen: New FullScreen request newVal=0x0 1353687928 INFO [3064:6084] COSpiceX::Connect: spicec pid 2412 1353687934 ERROR [3064:6084] COSpiceX::Connect: failed to connect to spice client pipe 1353688155 INFO [3064:6084]
Re: [Users] vm-fex paramters
- Original Message - From: Kevin Maziere Aubry kevin.mazi...@alterway.fr To: Dan Yasny dya...@redhat.com Cc: users@ovirt.org Sent: Wednesday, 2 January, 2013 12:01:27 PM Subject: Re: [Users] vm-fex paramters Hi I get the plugin from here : yum install http://resources.ovirt.org/releases/nightly/rpm/Fedora/17/noarch/vdsm-hook-vmfex-4.10.3-0.41.gitad916c7.fc17.noarch.rpm The error are : Thread-801738::DEBUG::2013-01-02 10:35:24,568::__init__::1249::Storage.Misc.excCmd::(_log) FAILED: err = 'vmfex: starting to edit VM \nvmfex: customProperty: \'00:1a:4a:1f:96:01\':\'p1p\'\nvmfex: ERROR Traceback (most recent call last):\n File /usr/libexec/vdsm/hooks/before_vm_start/50_vmfex, line 174, in module\n vmfexd = ast.literal_eval(vmfex)\n File /usr/lib64/python2.7/ast.py, line 49, in literal_eval\n node_or_string = parse(node_or_string, mode=\'eval\')\n File /usr/lib64/python2.7/ast.py, line 37, in parse\n return compile(source, filename, mode, PyCF_ONLY_AST)\n File unknown, line 1\n \'00:1a:4a:1f:96:01\':\'p1p\'\n ^\nSyntaxError: invalid syntax\n\n'; rc = 2 SyntaxError: invalid syntax Where p1p is my UCS profile. Thanks, can you also post your custom property, exactly as is looks in the GUI? Kévin 2013/1/2 Dan Yasny dya...@redhat.com - Original Message - From: Kevin Maziere Aubry kevin.mazi...@alterway.fr To: users@ovirt.org Sent: Wednesday, 2 January, 2013 11:37:03 AM Subject: [Users] vm-fex paramters Hi all Does someone success to make the vm-fex plugin to work ? I've setup the engine with the vmfex parameter and on my VM I tried to setup the options but I always have a error, vdsm plugin doesn't recognive my syntaxe. 'mac':'profile' mac:profile 'mac':profile I follow these tutos : http://digitalcritical.wordpress.com/tag/vmfex/ http://wiki.ovirt.org/VDSM-Hooks/vmfex Hi Kevin, Where did you download the hook from? -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Regards, Dan Yasny Red Hat Israel +972 9769 2280 -- Kevin Mazière Responsable Infrastructure Alter Way – Hosting 1 rue Royal - 227 Bureaux de la Colline 92213 Saint-Cloud Cedex Tél : +33 (0)1 41 16 38 41 Mob : +33 (0)7 62 55 57 05 http://www.alterway.fr -- Regards, Dan Yasny Red Hat Israel +972 9769 2280 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Ovirt Node rebooting +/- every 10 days
Am Freitag, den 21.12.2012, 07:46 -0500 schrieb EricD: I have oVirt 3.1 with two nodes, one of them is running good without restarting the other keep restarting, the maximum uptime that the server can get is 10 days before it restart, I think that it might be something related to the disk. FYI, the disk are 2 disk of 1TB (RAID-0) to get 2TB. # /var/log/messages Dec 21 05:28:44 hypervisor01a ntpd[945]: 0.0.0.0 c61c 0c clock_step +17997.588918 s Dec 21 05:28:44 hypervisor01a ntpd[945]: 0.0.0.0 c614 04 freq_mode Dec 21 05:28:45 hypervisor01a kdump: No crashkernel parameter specified for running kernel Dec 21 05:28:45 hypervisor01a kdumpctl[1366]: Starting kdump: Dec 21 05:28:45 hypervisor01a kdump: failed to start up Dec 21 05:28:45 hypervisor01a systemd[1]: kdump.service: main process exited, code=exited, status=1 Dec 21 05:28:45 hypervisor01a systemd[1]: Unit kdump.service entered failed state. Dec 21 05:28:45 hypervisor01a systemd[1]: Startup finished in 888ms 157us (kernel) + 2s 521ms 289us (initrd) + 15s 577ms 672us (userspace) = 18s 987ms 118us. Dec 21 05:28:45 hypervisor01a ntpd[945]: 0.0.0.0 c618 08 no_sys_peer Dec 21 05:29:04 hypervisor01a vdsm TaskManager.Task ERROR Task=`5f51ff52-f9a4-4854-a41d-d5d33c872458`::Unexpected error Dec 21 05:29:04 hypervisor01a vdsm Storage.Dispatcher.Protect ERROR {'status': {'message': Unknown pool id, pool not connected: ('dbb49db6-9a24-4395-a8bd-c9f222eaecab',), 'code': 309}} Dec 21 05:29:04 hypervisor01a vdsm TaskManager.Task ERROR Task=`7b0cf3b0-6d26-4421-a221-29f2ecaaeb1f`::Unexpected error Dec 21 05:29:04 hypervisor01a vdsm Storage.Dispatcher.Protect ERROR {'status': {'message': Unknown pool id, pool not connected: ('dbb49db6-9a24-4395-a8bd-c9f222eaecab',), 'code': 309}} Dec 21 05:29:04 hypervisor01a kernel: [ 37.944421] ata1: hard resetting link Dec 21 05:29:04 hypervisor01a kernel: [ 38.247979] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Dec 21 05:29:04 hypervisor01a kernel: [ 38.248802] ata1.00: configured for UDMA/133 Dec 21 05:29:04 hypervisor01a kernel: [ 38.248807] ata1: EH complete Dec 21 05:29:04 hypervisor01a kernel: [ 38.249013] ata2: hard resetting link Dec 21 05:29:04 hypervisor01a kernel: [ 38.553112] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Dec 21 05:29:04 hypervisor01a kernel: [ 38.553881] ata2.00: configured for UDMA/133 Dec 21 05:29:04 hypervisor01a kernel: [ 38.553886] ata2: EH complete Dec 21 05:29:04 hypervisor01a kernel: [ 38.554064] ata3: hard resetting link Dec 21 05:29:05 hypervisor01a kernel: [ 38.858275] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Dec 21 05:29:05 hypervisor01a kernel: [ 38.861154] ata3.00: configured for UDMA/133 Dec 21 05:29:05 hypervisor01a kernel: [ 38.861159] ata3: EH complete Dec 21 05:29:05 hypervisor01a kernel: [ 38.861352] ata4: hard resetting link Dec 21 05:29:05 hypervisor01a kernel: [ 39.165397] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Dec 21 05:29:05 hypervisor01a kernel: [ 39.168223] ata4.00: configured for UDMA/133 Dec 21 05:29:05 hypervisor01a kernel: [ 39.168229] ata4: EH complete Dec 21 05:29:05 hypervisor01a kernel: [ 39.168421] ata5: hard resetting link Dec 21 05:29:05 hypervisor01a kernel: [ 39.472459] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) Dec 21 05:29:05 hypervisor01a kernel: [ 39.480040] ata5.00: configured for UDMA/100 Dec 21 05:29:05 hypervisor01a kernel: [ 39.485478] ata5: EH complete Dec 21 05:29:05 hypervisor01a kernel: [ 39.485642] ata6: limiting SATA link speed to 1.5 Gbps Dec 21 05:29:05 hypervisor01a kernel: [ 39.485647] ata6: hard resetting link Dec 21 05:29:06 hypervisor01a kernel: [ 39.790610] ata6: SATA link down (SStatus 0 SControl 310) Hey, to me this looks like some generic SATA error - did you try to run a stock Fedora on the affected machine and look if it behaves similar? Greetings fabian # RAID-0 mdadm --detail /dev/md127 /dev/md127: Version : 1.2 Creation Time : Sun Nov 18 14:47:15 2012 Raid Level : raid0 Array Size : 1953524736 (1863.03 GiB 2000.41 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Update Time : Sun Nov 18 14:47:15 2012 State : clean Active Devices : 2 Working Devices : 2 Failed Devices : 0 Spare Devices : 0 Chunk Size : 512K Name : hypervisor01-a:0 (local to host hypervisor01-a) UUID : 9eb1324d:57eed46d:c23ae815:0666e238 Events : 0 Number Major Minor RaidDevice State 0 25320 active sync /dev/dm-2 1 25331 active sync /dev/dm-3 signature.asc Description: This is a digitally signed message part ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] No spice connection - Remote-Viewer quits after a few seconds
Hi David, I set SPICEC_LOG_LEVEL=0 rebooted the machine but no spicec log was written in %temp%. If I perform a search in this folder for spice only two files appear: %temp%/spicex.log %temp%/low/spicex.log I even tried a new installation of http://spice-space.org/download/gtk/windows/virt-viewer-0.5.3_x86.exe but nothing changed. Best regards Dennis Von: David Jaša [dj...@redhat.com] Gesendet: Mittwoch, 2. Januar 2013 11:10 An: Dennis Böck Cc: users@oVirt.org Betreff: Re: [Users] No spice connection - Remote-Viewer quits after a few seconds Hi Dennis, this log isn't exactly helpful either. :( Spicec just quits before it could receive any connection info from the plugin... Could you try to set another variable: SPICEC_LOG_LEVEL=0 and find spicec log (also in %temp%)? David Dennis Böck píše v Čt 27. 12. 2012 v 14:12 +: Hi David, here is my %temp%/low/spicex.log (%temp%/spicex.log is not updated!), after setting the system variable spicex_debug_level=0: 1356616807 INFO [4944:5044] spicex_init_logger: started 1356616807 DEBUG [4944:5044] COSpiceX::put_DynamicMenu: DynamicMenu 1356616807 INFO [4944:5044] COSpiceX::put_FullScreen: New FullScreen request newVal=0x0 1356616807 DEBUG [4944:5044] COSpiceX::Connect: Running spicec (C:\Users\Dennis\AppData\Local\virt-viewer\bin\remote-viewer.exe --spice-controller) 1356616807 INFO [4944:5044] COSpiceX::Connect: spicec pid 5996 1356616809 DEBUG [4944:5044] COSpiceX::Connect: connecting to spice client's pipe 1356616814 ERROR [4944:5044] COSpiceX::Connect: failed to connect to spice client pipe Best regards Dennis Von: David Jaša [dj...@redhat.com] Gesendet: Dienstag, 4. Dezember 2012 12:16 An: Einav Cohen Cc: Dennis Böck; users@oVirt.org Betreff: Re: [Users] No spice connection - Remote-Viewer quits after a few seconds Einav, Dennis's previous logs suggest that he's using spicex/IE/windows, not xpi/firefox/linux. Dennis, could you go through my last week conversation with Karli Sjöberg and repeat the debugging steps described there? David Einav Cohen píše v Po 03. 12. 2012 v 14:52 -0500: Hi Dennis, We need some more information that can be useful to us in order to try solving the problem. Can you please follow the instructions below for getting more detailed logs and reply with the results? 1. Set spice-xpi log level to DEBUG (for versions 2.8, modify logger.ini). 2. Verify which client is running (we should get that from 1), e.g. by using top, or checking alternatives. 3. Getting version: rpm -q spice-xpi virt-viewer spice-client 4. client/remote-viewer logs: For spicec, there should be a file ~/.spicec/spicec.log For remote-viewer: In order to also get log messages of remote-viewer, run firefox from shell. For debug level log messages, the following environment variables should be set, for example $ export SPICE_DEBUG=1 $ export G_DEBUG_MESSAGES=all $ firefox Thanks, Einav - Original Message - From: Dennis Böck den...@webdienstleistungen.com To: Itamar Heim ih...@redhat.com Cc: users@oVirt.org users@ovirt.org Sent: Sunday, December 2, 2012 5:28:58 PM Subject: Re: [Users] No spice connection - Remote-Viewer quits after a few seconds I have the same problem, if I try to connect from admin portal. -Ursprüngliche Nachricht- Von: Itamar Heim [mailto:ih...@redhat.com] Gesendet: Samstag, 24. November 2012 23:47 An: Dennis Böck Cc: users@oVirt.org Betreff: Re: [Users] No spice connection - Remote-Viewer quits after a few seconds On 11/23/2012 11:04 PM, Dennis Böck wrote: Here are some logs: is the same working from admin portal? 1351785267 INFO [4504:4560] spicex_log_cleanup: done 1351785268 INFO [3788:5440] spicex_log_cleanup: done 1351867007 INFO [4868:4916] spicex_init_logger: started 1351867007 INFO [4868:4916] COSpiceX::put_FullScreen: New FullScreen request newVal=0x0 1351867007 INFO [4868:4916] COSpiceX::Connect: spicec pid 4948 1351867013 ERROR [4868:4916] COSpiceX::Connect: failed to connect to spice client pipe 1351867038 INFO [4868:4916] COSpiceX::put_FullScreen: New FullScreen request newVal=0x0 1351867038 INFO [4868:4916] COSpiceX::Connect: spicec pid 2732 1351867043 ERROR [4868:4916] COSpiceX::Connect: failed to connect to spice client pipe 1351867169 INFO [4868:4916] spicex_log_cleanup: done 1353687854 INFO [4568:2008] spicex_init_logger: started 1353687854 INFO [4568:2008] COSpiceX::put_FullScreen: New FullScreen request newVal=0x0 1353687854 INFO [4568:2008] COSpiceX::Connect: spicec pid 5776 1353687860 ERROR [4568:2008] COSpiceX::Connect: failed to connect to spice client pipe 1353687901 INFO [3064:6084]
[Users] ovirt reporting wrong cpu family
Hi, I have installed ovirt 3.1 on fedora 17. I added my node wtih intel E5-2620 (sandy bridge) to cluster. Even though model is detected properly,CPU name is shown as Intel Conroe family instead of sandy bridge. Since my cluster is configured as sandy bridge i got this error: Host fig moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : model_SandyBridge. as per cpuinfo :model name : Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz. i moved the cluster to conroe ,got the host up. reference: http://en.wikipedia.org/wiki/Sandy_Bridge_(microarchitecture) http://ark.intel.com/products/64594 PFA for screenshot. Thanks, Jithin attachment: cpu wrong info.JPG___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] pvscan error in AIO fr a new disk
Hello, I have an f18 AIO setup where the server is a guest inside updated f17 host. The guest has a scsi disk configured this way disk type='file' device='disk' driver name='qemu' type='qcow2'/ source file='/var/lib/libvirt/images/f18e.img'/ target dev='sda' bus='scsi'/ address type='drive' controller='0' bus='0' target='0' unit='0'/ /disk From virt-manager of host I add a second scsi disk. In guest I run echo - - - /sys/class/scsi_host/host2/scan and I get inside it # dmesg| tail [ 531.004145] ata2.00: configured for MWDMA2 [ 531.004638] ata2: EH complete [ 8133.578309] scsi 2:0:0:1: Direct-Access QEMU QEMU HARDDISK 1.0. PQ: 0 ANSI: 5 [ 8133.579128] sd 2:0:0:1: [sdb] 20971520 512-byte logical blocks: (10.7 GB/10.0 GiB) [ 8133.579213] sd 2:0:0:1: [sdb] Write Protect is off [ 8133.579216] sd 2:0:0:1: [sdb] Mode Sense: 63 00 00 08 [ 8133.579255] sd 2:0:0:1: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 8133.579760] sd 2:0:0:1: Attached scsi generic sg2 type 0 [ 8133.580220] sdb: unknown partition table [ 8133.580403] sd 2:0:0:1: [sdb] Attached SCSI disk So that # fdisk -l /dev/sdb Disk /dev/sdb: 10.7 GB, 10737418240 bytes, 20971520 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes But : # pvcreate /dev/sdb Device /dev/sdb not found (or ignored by filtering). Could it be oVirt preventing this or should I post against F18 and/or libvirt ? BTW: packages are from nightly as for ovirt-engine-3.2.0-1.20130101.git9486bfd.fc18.noarch Thanks, Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] pvscan error in AIO fr a new disk
Probably something related with multipath default F18 config or what set up by oVirt, as I see this in multipath.conf: # RHEV REVISION 0.9 Any way # lvm dumpconfig |grep filter filter=a/.*/ # multipath -l Jan 02 16:42:52 | multipath.conf +5, invalid keyword: getuid_callout Jan 02 16:42:52 | multipath.conf +18, invalid keyword: getuid_callout 0QEMU_QEMU_HARDDISK_drive-scsi0-0-0-1 dm-5 QEMU,QEMU HARDDISK size=10G features='0' hwhandler='0' wp=rw `-+- policy='service-time 0' prio=0 status=active `- 2:0:0:1 sdb 8:16 active undef running 0QEMU_QEMU_HARDDISK_drive-scsi0-0-0-0 dm-0 QEMU,QEMU HARDDISK size=18G features='0' hwhandler='0' wp=rw `-+- policy='service-time 0' prio=0 status=active `- 2:0:0:0 sda 8:0 active undef running and # pvcreate /dev/mapper/0QEMU_QEMU_HARDDISK_drive-scsi0-0-0-1 Physical volume /dev/mapper/0QEMU_QEMU_HARDDISK_drive-scsi0-0-0-1 successfully created # vgs VG #PV #LV #SN Attr VSize VFree fedora 1 2 0 wz--n- 17.51g0 # vgextend fedora /dev/mapper/0QEMU_QEMU_HARDDISK_drive-scsi0-0-0-1 Volume group fedora successfully extended # vgs VG #PV #LV #SN Attr VSize VFree fedora 2 2 0 wz--n- 27.50g 10.00g Gianluca ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] oVirt Templates // remove after a couple VMs got created is not possible ?
Hi All, I was wondering why there is a necessity of keeping a oVirt Template ? I just tried to remove a template but it complained that it was in use by other VMs ? I thoguht a VM is created independently using the Template to copy settings disk from and once done is independent from the Template ? So either way - how can I remove the Template without shutting down / removing any of the VMs already created based on that Template ? Thanks Alex ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] vm-fex paramters
Thanks Dan, the params are now good. New error regarding libvirt : Traceback (most recent call last): File /usr/share/vdsm/vm.py, line 570, in _startUnderlyingVm self._run() File /usr/share/vdsm/libvirtvm.py, line 1364, in _run self._connection.createXML(domxml, flags), File /usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py, line 82, in wrapper ret = f(*args, **kwargs) File /usr/lib64/python2.7/site-packages/libvirt.py, line 2564, in createXML if ret is None:raise libvirtError('virDomainCreateXML() failed', conn=self) libvirtError: erreur interne network 'direct-pool' uses a direct mode, but has no forward dev and no interface pool Thread-823791::DEBUG::2013-01-02 18:21:49,892::vm::920::vm.Vm::(setDownStatus) vmId=`32c3e4a2-96c1-40a5-b03c-dafeba50962e`::Changed state to Down: erreur interne network 'direct-pool' uses a direct mode, but has no forward dev and no interface pool [root@node1 ~]# rpm -qa | grep libvirt libvirt-debuginfo-0.10.1-1.fc17.x86_64 libvirt-0.10.1-1.fc17.x86_64 libvirt-daemon-config-network-0.10.1-1.fc17.x86_64 libvirt-daemon-driver-interface-0.10.1-1.fc17.x86_64 libvirt-daemon-driver-network-0.10.1-1.fc17.x86_64 libvirt-daemon-driver-storage-0.10.1-1.fc17.x86_64 libvirt-daemon-lxc-0.10.1-1.fc17.x86_64 libvirt-daemon-qemu-0.10.1-1.fc17.x86_64 libvirt-docs-0.10.1-1.fc17.x86_64 libvirt-python-0.10.1-1.fc17.x86_64 libvirt-client-0.10.1-1.fc17.x86_64 libvirt-daemon-0.10.1-1.fc17.x86_64 libvirt-daemon-config-nwfilter-0.10.1-1.fc17.x86_64 libvirt-daemon-driver-libxl-0.10.1-1.fc17.x86_64 libvirt-daemon-driver-lxc-0.10.1-1.fc17.x86_64 libvirt-daemon-driver-nodedev-0.10.1-1.fc17.x86_64 libvirt-daemon-driver-nwfilter-0.10.1-1.fc17.x86_64 libvirt-daemon-driver-secret-0.10.1-1.fc17.x86_64 libvirt-daemon-driver-uml-0.10.1-1.fc17.x86_64 libvirt-daemon-kvm-0.10.1-1.fc17.x86_64 libvirt-daemon-uml-0.10.1-1.fc17.x86_64 libvirt-devel-0.10.1-1.fc17.x86_64 libvirt-lock-sanlock-0.10.1-1.fc17.x86_64 libvirt-daemon-driver-qemu-0.10.1-1.fc17.x86_64 libvirt-daemon-driver-xen-0.10.1-1.fc17.x86_64 [root@node1 ~]# Kevin 2013/1/2 Dan Yasny dya...@redhat.com - Original Message - From: Kevin Maziere Aubry kevin.mazi...@alterway.fr To: Dan Yasny dya...@redhat.com Sent: Wednesday, 2 January, 2013 3:26:46 PM Subject: Re: [Users] vm-fex paramters Hi I tried these syntax : 'macadress':'profile' macadress:profile macadress:profile The custom property you enter in the UI should look like this: {'00:1a:4a:1f:96:01':'p1p'} for additional mappings, what you write in the UI is as follows: {'$MAC':'$PROFILE','$MAC1':'PROFILE1','MAC2':'PROFILE2'} This strictly follows the python dictionary syntax, and it fails, because the syntax requires curly braces With macadress the mac adresse generic format : aa:aa:aa:aa:aa:aa And the profile the name I set un UCs : p1p Kevin 2013/1/2 Dan Yasny dya...@redhat.com - Original Message - From: Kevin Maziere Aubry kevin.mazi...@alterway.fr To: Dan Yasny dya...@redhat.com Sent: Wednesday, 2 January, 2013 1:26:52 PM Subject: Re: [Users] vm-fex paramters vmfex and I can add whatever I want as a parameter Yes, but what exactly did you add? 2013/1/2 Dan Yasny dya...@redhat.com - Original Message - From: Kevin Maziere Aubry kevin.mazi...@alterway.fr To: Dan Yasny dya...@redhat.com Cc: users@ovirt.org Sent: Wednesday, 2 January, 2013 12:01:27 PM Subject: Re: [Users] vm-fex paramters Hi I get the plugin from here : yum install http://resources.ovirt.org/releases/nightly/rpm/Fedora/17/noarch/vdsm-hook-vmfex-4.10.3-0.41.gitad916c7.fc17.noarch.rpm The error are : Thread-801738::DEBUG::2013-01-02 10:35:24,568::__init__::1249::Storage.Misc.excCmd::(_log) FAILED: err = 'vmfex: starting to edit VM \nvmfex: customProperty: \'00:1a:4a:1f:96:01\':\'p1p\'\nvmfex: ERROR Traceback (most recent call last):\n File /usr/libexec/vdsm/hooks/before_vm_start/50_vmfex, line 174, in module\n vmfexd = ast.literal_eval(vmfex)\n File /usr/lib64/python2.7/ast.py, line 49, in literal_eval\n node_or_string = parse(node_or_string, mode=\'eval\')\n File /usr/lib64/python2.7/ast.py, line 37, in parse\n return compile(source, filename, mode, PyCF_ONLY_AST)\n File unknown, line 1\n \'00:1a:4a:1f:96:01\':\'p1p\'\n ^\nSyntaxError: invalid syntax\n\n'; rc = 2 SyntaxError: invalid syntax Where p1p is my UCS profile. Thanks, can you also post your custom property, exactly as is looks in the GUI? Kévin 2013/1/2 Dan Yasny dya...@redhat.com - Original Message - From: Kevin Maziere Aubry kevin.mazi...@alterway.fr To: users@ovirt.org Sent: Wednesday, 2 January, 2013 11:37:03 AM Subject:
[Users] Upgrading ovirt-engine from Centos dre repo
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Finally. After some major issues that comes and goes I end up in a situation where I am unable to upgrade my oVirt. I think this is the base of my problem and if I cannot solve this I will have strange issues for the rest Its seems to be exact same problem as in this thread http://lists.ovirt.org/pipermail/users/2012-August/008799.html. I run an engine-upgrade and got Loaded plugins: fastestmirror, versionlock Checking for updates... (This may take several minutes) Loading mirror speeds from cached hostfile * base: ftp.availo.se * epel: mirror.nsc.liu.se * extras: ftp.availo.se * updates: ftp.availo.se 11 Updates available: * ovirt-engine-3.1.0-3.19.el6.noarch * ovirt-engine-backend-3.1.0-3.19.el6.noarch * ovirt-engine-config-3.1.0-3.19.el6.noarch * ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch * ovirt-engine-genericapi-3.1.0-3.19.el6.noarch * ovirt-engine-notification-service-3.1.0-3.19.el6.noarch * ovirt-engine-restapi-3.1.0-3.19.el6.noarch * ovirt-engine-setup-3.1.0-3.19.el6.noarch * ovirt-engine-tools-common-3.1.0-3.19.el6.noarch * ovirt-engine-userportal-3.1.0-3.19.el6.noarch * ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch Error: New ovirt-engine-setup rpm available via yum. Please execute `yum update ovirt-engine-setup`, then re-execute 'ovirt-engine-upgrade'. To use the current ovirt-engine-setup rpm, execute 'ovirt-engine-upgrade --force-current-setup-rpm'. So I did. [root@ovirt ~]# yum update ovirt-engine-setup Loaded plugins: fastestmirror, versionlock Loading mirror speeds from cached hostfile * base: ftp.availo.se * epel: mirror.nsc.liu.se * extras: ftp.availo.se * updates: ftp.availo.se Setting up Update Process No Packages marked for Update I also checked which version i have. [root@ovirt ~]# rpm -q ovirt-engine-setup ovirt-engine-setup-3.1.0_0001-1.8.el6.x86_64 Then I start Becuase the installed package was missing in repos I did... [root@ovirt ~]# engine-upgrade --force-current-setup-rpm --no-yum-rollback Loaded plugins: fastestmirror, versionlock Checking for updates... (This may take several minutes) Loading mirror speeds from cached hostfile * base: ftp.availo.se * epel: mirror.nsc.liu.se * extras: ftp.availo.se * updates: ftp.availo.se 11 Updates available: * ovirt-engine-3.1.0-3.19.el6.noarch * ovirt-engine-backend-3.1.0-3.19.el6.noarch * ovirt-engine-config-3.1.0-3.19.el6.noarch * ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch * ovirt-engine-genericapi-3.1.0-3.19.el6.noarch * ovirt-engine-notification-service-3.1.0-3.19.el6.noarch * ovirt-engine-restapi-3.1.0-3.19.el6.noarch * ovirt-engine-setup-3.1.0-3.19.el6.noarch * ovirt-engine-tools-common-3.1.0-3.19.el6.noarch * ovirt-engine-userportal-3.1.0-3.19.el6.noarch * ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch During the upgrade process, oVirt-Engine will not be accessible. All existing running virtual machines will continue but you will not be able to start or stop any new virtual machines during the process. Would you like to proceed? (yes|no): yes Stopping JBoss Service...[ DONE ] Backing Up Database... [ DONE ] Rename Database... [ DONE ] Updating rpms... [ DONE ] Updating Database... [ DONE ] Restore Database name... [ DONE ] Running post install configuration...[ DONE ] Starting JBoss...[ DONE ] oVirt-Engine upgrade completed successfully! To complete the upgrade (last line) I have to restart jboss-as service in another session. I then repeat the first step and got this... [root@ovirt ~]# engine-upgrade Loaded plugins: fastestmirror, versionlock Checking for updates... (This may take several minutes) Loading mirror speeds from cached hostfile * base: ftp.availo.se * epel: mirror.nsc.liu.se * extras: ftp.availo.se * updates: ftp.availo.se 11 Updates available: * ovirt-engine-3.1.0-3.19.el6.noarch * ovirt-engine-backend-3.1.0-3.19.el6.noarch * ovirt-engine-config-3.1.0-3.19.el6.noarch * ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch * ovirt-engine-genericapi-3.1.0-3.19.el6.noarch * ovirt-engine-notification-service-3.1.0-3.19.el6.noarch * ovirt-engine-restapi-3.1.0-3.19.el6.noarch * ovirt-engine-setup-3.1.0-3.19.el6.noarch * ovirt-engine-tools-common-3.1.0-3.19.el6.noarch * ovirt-engine-userportal-3.1.0-3.19.el6.noarch * ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch Error: New ovirt-engine-setup rpm available via yum. Please execute `yum update ovirt-engine-setup`, then re-execute 'ovirt-engine-upgrade'. To use the current ovirt-engine-setup rpm, execute 'ovirt-engine-upgrade --force-current-setup-rpm'. [root@ovirt ~]# rpm -q ovirt-engine-setup ovirt-engine-setup-3.1.0_0001-1.8.el6.x86_64 Is there a proper way to recover from
Re: [Users] Upgrading ovirt-engine from Centos dre repo
On 01/02/2013 08:47 PM, Ricky Schneberger wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Finally. After some major issues that comes and goes I end up in a situation where I am unable to upgrade my oVirt. I hope someone can help, but since you are using rpms which we have no idea which patches they include, etc, it is a bit hard. (i.e., iiuc, its from a specific distro, maintaining backports of patches on its own) I think this is the base of my problem and if I cannot solve this I will have strange issues for the rest Its seems to be exact same problem as in this thread http://lists.ovirt.org/pipermail/users/2012-August/008799.html. I run an engine-upgrade and got Loaded plugins: fastestmirror, versionlock Checking for updates... (This may take several minutes) Loading mirror speeds from cached hostfile * base: ftp.availo.se * epel: mirror.nsc.liu.se * extras: ftp.availo.se * updates: ftp.availo.se 11 Updates available: * ovirt-engine-3.1.0-3.19.el6.noarch * ovirt-engine-backend-3.1.0-3.19.el6.noarch * ovirt-engine-config-3.1.0-3.19.el6.noarch * ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch * ovirt-engine-genericapi-3.1.0-3.19.el6.noarch * ovirt-engine-notification-service-3.1.0-3.19.el6.noarch * ovirt-engine-restapi-3.1.0-3.19.el6.noarch * ovirt-engine-setup-3.1.0-3.19.el6.noarch * ovirt-engine-tools-common-3.1.0-3.19.el6.noarch * ovirt-engine-userportal-3.1.0-3.19.el6.noarch * ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch Error: New ovirt-engine-setup rpm available via yum. Please execute `yum update ovirt-engine-setup`, then re-execute 'ovirt-engine-upgrade'. To use the current ovirt-engine-setup rpm, execute 'ovirt-engine-upgrade --force-current-setup-rpm'. So I did. [root@ovirt ~]# yum update ovirt-engine-setup Loaded plugins: fastestmirror, versionlock Loading mirror speeds from cached hostfile * base: ftp.availo.se * epel: mirror.nsc.liu.se * extras: ftp.availo.se * updates: ftp.availo.se Setting up Update Process No Packages marked for Update I also checked which version i have. [root@ovirt ~]# rpm -q ovirt-engine-setup ovirt-engine-setup-3.1.0_0001-1.8.el6.x86_64 Then I start Becuase the installed package was missing in repos I did... [root@ovirt ~]# engine-upgrade --force-current-setup-rpm --no-yum-rollback Loaded plugins: fastestmirror, versionlock Checking for updates... (This may take several minutes) Loading mirror speeds from cached hostfile * base: ftp.availo.se * epel: mirror.nsc.liu.se * extras: ftp.availo.se * updates: ftp.availo.se 11 Updates available: * ovirt-engine-3.1.0-3.19.el6.noarch * ovirt-engine-backend-3.1.0-3.19.el6.noarch * ovirt-engine-config-3.1.0-3.19.el6.noarch * ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch * ovirt-engine-genericapi-3.1.0-3.19.el6.noarch * ovirt-engine-notification-service-3.1.0-3.19.el6.noarch * ovirt-engine-restapi-3.1.0-3.19.el6.noarch * ovirt-engine-setup-3.1.0-3.19.el6.noarch * ovirt-engine-tools-common-3.1.0-3.19.el6.noarch * ovirt-engine-userportal-3.1.0-3.19.el6.noarch * ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch During the upgrade process, oVirt-Engine will not be accessible. All existing running virtual machines will continue but you will not be able to start or stop any new virtual machines during the process. Would you like to proceed? (yes|no): yes Stopping JBoss Service...[ DONE ] Backing Up Database... [ DONE ] Rename Database... [ DONE ] Updating rpms... [ DONE ] Updating Database... [ DONE ] Restore Database name... [ DONE ] Running post install configuration...[ DONE ] Starting JBoss...[ DONE ] oVirt-Engine upgrade completed successfully! To complete the upgrade (last line) I have to restart jboss-as service in another session. I then repeat the first step and got this... [root@ovirt ~]# engine-upgrade Loaded plugins: fastestmirror, versionlock Checking for updates... (This may take several minutes) Loading mirror speeds from cached hostfile * base: ftp.availo.se * epel: mirror.nsc.liu.se * extras: ftp.availo.se * updates: ftp.availo.se 11 Updates available: * ovirt-engine-3.1.0-3.19.el6.noarch * ovirt-engine-backend-3.1.0-3.19.el6.noarch * ovirt-engine-config-3.1.0-3.19.el6.noarch * ovirt-engine-dbscripts-3.1.0-3.19.el6.noarch * ovirt-engine-genericapi-3.1.0-3.19.el6.noarch * ovirt-engine-notification-service-3.1.0-3.19.el6.noarch * ovirt-engine-restapi-3.1.0-3.19.el6.noarch * ovirt-engine-setup-3.1.0-3.19.el6.noarch * ovirt-engine-tools-common-3.1.0-3.19.el6.noarch * ovirt-engine-userportal-3.1.0-3.19.el6.noarch * ovirt-engine-webadmin-portal-3.1.0-3.19.el6.noarch Error: New ovirt-engine-setup rpm available via
Re: [Users] ovirt reporting wrong cpu family
On 01/02/2013 03:37 PM, Jithin Raju wrote: Hi, I have installed ovirt 3.1 on fedora 17. I added my node wtih intel E5-2620 (sandy bridge) to cluster. Even though model is detected properly,CPU name is shown as Intel Conroe family instead of sandy bridge. Since my cluster is configured as sandy bridge i got this error: Host fig moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : model_SandyBridge. as per cpuinfo :model name : Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz. i moved the cluster to conroe ,got the host up. reference: http://en.wikipedia.org/wiki/Sandy_Bridge_(microarchitecture) http://ark.intel.com/products/64594 PFA for screenshot. Thanks, Jithin ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users please share vdsClient -s 0 getVdsCaps | grep -i flags from the host ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] ovirt reporting wrong cpu family
On 1/2/2013 3:33 PM, Itamar Heim wrote: On 01/02/2013 03:37 PM, Jithin Raju wrote: Hi, I have installed ovirt 3.1 on fedora 17. I added my node wtih intel E5-2620 (sandy bridge) to cluster. Even though model is detected properly,CPU name is shown as Intel Conroe family instead of sandy bridge. Since my cluster is configured as sandy bridge i got this error: Host fig moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : model_SandyBridge. I had a similar problem with 3.1 and E5-2670's. The 3.2 alpha works fine though. as per cpuinfo :model name : Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz. i moved the cluster to conroe ,got the host up. reference: http://en.wikipedia.org/wiki/Sandy_Bridge_(microarchitecture) http://ark.intel.com/products/64594 PFA for screenshot. Thanks, Jithin ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users please share vdsClient -s 0 getVdsCaps | grep -i flags from the host ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] ovirt reporting wrong cpu family
Hi , Please find the requested flags below: [root@fig /]# vdsClient -s 0 getVdsCaps | grep -i flags cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dtherm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_coreduo,model_Conroe Thanks, Jithin On Thu, Jan 3, 2013 at 2:03 AM, Itamar Heim ih...@redhat.com wrote: On 01/02/2013 03:37 PM, Jithin Raju wrote: Hi, I have installed ovirt 3.1 on fedora 17. I added my node wtih intel E5-2620 (sandy bridge) to cluster. Even though model is detected properly,CPU name is shown as Intel Conroe family instead of sandy bridge. Since my cluster is configured as sandy bridge i got this error: Host fig moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : model_SandyBridge. as per cpuinfo :model name : Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz. i moved the cluster to conroe ,got the host up. reference: http://en.wikipedia.org/wiki/**Sandy_Bridge_(**microarchitecture)http://en.wikipedia.org/wiki/Sandy_Bridge_(microarchitecture) http://ark.intel.com/products/**64594http://ark.intel.com/products/64594 PFA for screenshot. Thanks, Jithin __**_ Users mailing list Users@ovirt.org http://lists.ovirt.org/**mailman/listinfo/usershttp://lists.ovirt.org/mailman/listinfo/users please share vdsClient -s 0 getVdsCaps | grep -i flags from the host ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] ovirt reporting wrong cpu family
On 01/03/2013 05:49 AM, Jithin Raju wrote: Hi , Please find the requested flags below: [root@fig /]# vdsClient -s 0 getVdsCaps | grep -i flags cpuFlags = fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,dts,acpi,mmx,fxsr,sse,sse2,ss,ht,tm,pbe,syscall,nx,pdpe1gb,rdtscp,lm,constant_tsc,arch_perfmon,pebs,bts,rep_good,nopl,xtopology,nonstop_tsc,aperfmperf,pni,pclmulqdq,dtes64,monitor,ds_cpl,vmx,smx,est,tm2,ssse3,cx16,xtpr,pdcm,pcid,dca,sse4_1,sse4_2,x2apic,popcnt,tsc_deadline_timer,aes,xsave,avx,lahf_lm,ida,arat,epb,xsaveopt,pln,pts,dtherm,tpr_shadow,vnmi,flexpriority,ept,vpid,model_coreduo,model_Conroe i think a libvirt bug not detecting the model correctly (vdsm collects the list of models detect by libvirt and appends them to the cpu flags string - here model_Conroe). martin? Thanks, Jithin On Thu, Jan 3, 2013 at 2:03 AM, Itamar Heim ih...@redhat.com mailto:ih...@redhat.com wrote: On 01/02/2013 03:37 PM, Jithin Raju wrote: Hi, I have installed ovirt 3.1 on fedora 17. I added my node wtih intel E5-2620 (sandy bridge) to cluster. Even though model is detected properly,CPU name is shown as Intel Conroe family instead of sandy bridge. Since my cluster is configured as sandy bridge i got this error: Host fig moved to Non-Operational state as host does not meet the cluster's minimum CPU level. Missing CPU features : model_SandyBridge. as per cpuinfo :model name : Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz. i moved the cluster to conroe ,got the host up. reference: http://en.wikipedia.org/wiki/__Sandy_Bridge_(__microarchitecture) http://en.wikipedia.org/wiki/Sandy_Bridge_(microarchitecture) http://ark.intel.com/products/__64594 http://ark.intel.com/products/64594 PFA for screenshot. Thanks, Jithin _ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/__mailman/listinfo/users http://lists.ovirt.org/mailman/listinfo/users please share vdsClient -s 0 getVdsCaps | grep -i flags from the host ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users