Re: [Users] virt-v2v fail - GuestfsHandle.pm error + Redhat.pm error

2013-02-07 Thread Nicolas Ecarnot 

Le 07/02/2013 18:28, Gianluca Cecchi a écrit :

On Thu, Feb 7, 2013 at 4:48 PM, Nicolas Ecarnot wrote:


sh: sh:  at /usr/share/perl5/vendor_perl/Sys/VirtConvert/GuestfsHandle.pm
line 200.
  at /usr/share/perl5/vendor_perl/Sys/VirtConvert/Converter/RedHat.pm line
2321



I don't mind the warnings and I also had such errors I was able to correct
manually.

But here, the last two lines are lethal.

It seems oVirt tries to guess which OS is imported, and tries to do specific
actions, and do them bad.
Either there's a way o prevent oVirt from guessing, either there's a way to
correct the actions oVirt is failing to do...


I think you had better to tell which version of virt-v2v and on which platform.
eg:
virt-v2v-0.8.7-7.el6_3.x86_64 on CentOS 6.3

otherwise the lines referred could not be the same as yours...

Gianluca



Hi Gianluca,

Thank you for your answer. You are right, I have to precise the versions 
implied.


- Fedora 17 64 bits
- virt-v2v.x86_64version 0.8.8-1.fc17
- every ovirt component is of the family 3.1.0-4.fc17

I installed nothing exotic nor special. Just following the oVirt website 
doc.


Do I have to debug the perl script, or is there an option I can tweak in 
the virt-v2v command?


--
Nicolas Ecarnot
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Problem with Win 7 VM creation

2013-02-07 Thread Jim Kinney 
I have a iso image of the drivers in my iso storage. Just change CD and use
the driver CD. Be sure to change it back to be the install Cd. The win7
error will look something like "Can't install on that disk" and it looks
like it means the virtual hard drive after the driver installs and it sees
the drive. It really means "I don't have the install Cd anymore to install
from".

 windows...

On Thu, Feb 7, 2013 at 10:31 AM, Juan Jose  wrote:

> Hello everybody and Antoni,
>
> I have changed my NFS server to my engine machine and finally I have had
> to create a Fedora 17 VM machine in my oVirt system and now I'm trying to
> create  a Win 7 VM machine and when I want to Run once my machine, in Boot
> options I don't have the "virtio-win" driver to attach to floppy VM and
> when machine try to install system in virtual hard disk it ask for a driver
> for the disk. How can I install this driver and to be attached to my VM
> floppy?
>
> Many thanks in avanced,
>
> Juanjo.
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>


-- 
-- 
James P. Kinney III
*
*Every time you stop a school, you will have to build a jail. What you gain
at one end you lose at the other. It's like feeding a dog on his own tail.
It won't fatten the dog.
- Speech 11/23/1900 Mark Twain
*
http://electjimkinney.org
http://heretothereideas.blogspot.com/
*
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] windows guest user agent

2013-02-07 Thread Sallee, Stephen (Jake) 
Perfect THANK YOU!

Why couldn’t I find that link anywhere?  I would think that it would at least 
be on the ovirt website.

Jake Sallee
Godfather of Bandwidth
System Engineer
University of Mary Hardin-Baylor
900 College St.
Belton TX. 76513
Fone: 254-295-4658
Phax: 254-295-4221
HTTP://WWW.UMHB.EDU

From: Gianluca Cecchi [mailto:gianluca.cec...@gmail.com]
Sent: Thursday, February 07, 2013 12:15 PM
To: Sallee, Stephen (Jake)
Cc: users
Subject: Re: [Users] windows guest user agent


Il giorno 07/feb/2013 19:05, "Sallee, Stephen (Jake)" 
mailto:jake.sal...@umhb.edu>> ha scritto:
>
> I have been googeling trying to find info on how to install the guest agent 
> for windows, can anyone give me some insight?
>
>
>
> I did find some instructions on how to build it from inside the VM, but the 
> instructions a several months old and before I try them I would like to make 
> sure they are still the best method.
>
>
>
> http://gerrit.ovirt.org/gitweb?p=ovirt-guest-agent.git;a=blob;f=ovirt-guest-agent/README-windows.txt;h=bf6bb3c18567537489b56e6888b2eb7f025cc4f9;hb=HEAD
>
>
>
>
>
> Jake Sallee
>
> Godfather of Bandwidth
>
> System Engineer
>
> University of Mary Hardin-Baylor
>
> 900 College St.
>
> Belton TX. 76513
>
> Fone: 254-295-4658
>
> Phax: 254-295-4221
>
> HTTP://WWW.UMHB.EDU
>
>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
See here the spice-guest-tools iso:
http://spice-space.org/download.html

http://spice-space.org/download/binaries/spice-guest-tools/spice-guest-tools-0.3.exe
Hih,
Gianluca
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] windows guest user agent

2013-02-07 Thread Gianluca Cecchi 
Il giorno 07/feb/2013 19:05, "Sallee, Stephen (Jake)" 
ha scritto:
>
> I have been googeling trying to find info on how to install the guest
agent for windows, can anyone give me some insight?
>
>
>
> I did find some instructions on how to build it from inside the VM, but
the instructions a several months old and before I try them I would like to
make sure they are still the best method.
>
>
>
>
http://gerrit.ovirt.org/gitweb?p=ovirt-guest-agent.git;a=blob;f=ovirt-guest-agent/README-windows.txt;h=bf6bb3c18567537489b56e6888b2eb7f025cc4f9;hb=HEAD
>
>
>
>
>
> Jake Sallee
>
> Godfather of Bandwidth
>
> System Engineer
>
> University of Mary Hardin-Baylor
>
> 900 College St.
>
> Belton TX. 76513
>
> Fone: 254-295-4658
>
> Phax: 254-295-4221
>
> HTTP://WWW.UMHB.EDU
>
>
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
See here the spice-guest-tools iso:
http://spice-space.org/download.html

http://spice-space.org/download/binaries/spice-guest-tools/spice-guest-tools-0.3.exe
Hih,
Gianluca
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] windows guest user agent

2013-02-07 Thread Sallee, Stephen (Jake) 
I have been googeling trying to find info on how to install the guest agent for 
windows, can anyone give me some insight?

I did find some instructions on how to build it from inside the VM, but the 
instructions a several months old and before I try them I would like to make 
sure they are still the best method.

http://gerrit.ovirt.org/gitweb?p=ovirt-guest-agent.git;a=blob;f=ovirt-guest-agent/README-windows.txt;h=bf6bb3c18567537489b56e6888b2eb7f025cc4f9;hb=HEAD


Jake Sallee
Godfather of Bandwidth
System Engineer
University of Mary Hardin-Baylor
900 College St.
Belton TX. 76513
Fone: 254-295-4658
Phax: 254-295-4221
HTTP://WWW.UMHB.EDU

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] virt-v2v fail - GuestfsHandle.pm error + Redhat.pm error

2013-02-07 Thread Gianluca Cecchi 
On Thu, Feb 7, 2013 at 4:48 PM, Nicolas Ecarnot wrote:

>> sh: sh:  at /usr/share/perl5/vendor_perl/Sys/VirtConvert/GuestfsHandle.pm
>> line 200.
>>  at /usr/share/perl5/vendor_perl/Sys/VirtConvert/Converter/RedHat.pm line
>> 2321
>
>
> I don't mind the warnings and I also had such errors I was able to correct
> manually.
>
> But here, the last two lines are lethal.
>
> It seems oVirt tries to guess which OS is imported, and tries to do specific
> actions, and do them bad.
> Either there's a way o prevent oVirt from guessing, either there's a way to
> correct the actions oVirt is failing to do...

I think you had better to tell which version of virt-v2v and on which platform.
eg:
virt-v2v-0.8.7-7.el6_3.x86_64 on CentOS 6.3

otherwise the lines referred could not be the same as yours...

Gianluca
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Live Upgrade

2013-02-07 Thread Tobias Honacker 

Hi Christian,

iam talking about ovirt. Thanks for the RHEV info.


Best regards,
Tobias

Am 07.02.2013 17:17, schrieb Christian Hernandez:

Hi Tobias,

Are you talking about ovirt or RHEVM?

I know I upgraded with 0 downtime migrating from RHEV 3.0 ~> 3.1


Thank you,

Christian Hernandez
1225 Los Angeles Street
Glendale, CA 91204
Phone: 877-782-2737 ext. 4566
Fax: 818-265-3152
christi...@4over.com  
>
www.4over.com  >



On Thu, Feb 7, 2013 at 6:39 AM, Tobias Honacker > wrote:


Hi,

is it possible to do a live upgrade e.g. update from 3.0 to 3.1
without any downtime?


Best regards,
Tobias
___
Users mailing list
Users@ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users




___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Live Upgrade

2013-02-07 Thread Christian Hernandez 
Hi Tobias,

Are you talking about ovirt or RHEVM?

I know I upgraded with 0 downtime migrating from RHEV 3.0 ~> 3.1


Thank you,

Christian Hernandez
1225 Los Angeles Street
Glendale, CA 91204
Phone: 877-782-2737 ext. 4566
Fax: 818-265-3152
christi...@4over.com 
www.4over.com 


On Thu, Feb 7, 2013 at 6:39 AM, Tobias Honacker wrote:

> Hi,
>
> is it possible to do a live upgrade e.g. update from 3.0 to 3.1 without
> any downtime?
>
>
> Best regards,
> Tobias
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Install problems

2013-02-07 Thread Shu Ming 

Bug was filed here.

https://bugzilla.redhat.com/show_bug.cgi?id=908617

It seems that it is a openjdk bug.
https://community.jboss.org/message/796347?_sscc=t#796347
Jonathan Archer:

Hi All,

Just wondering if anyone could shed some light on an issue I'm seeing?

I've followed the instructions on the wiki to try and get an ovirt 
setup running. (F17 minimal, updated, add repo, yum install 
ovirt-engine, engine-setup)
All that seemed to go OK, and the database creation etc seemed to be 
fine, however starting the ovirt-engine service seems to have failed 
to start, was getting a http 503 error on trying the web interface.


Looking deeper into it, it seems that jboss-as seems to be failing to 
start with some errors around logging.
when I run systemctl start ovirt-engine.service i get the following in 
the logs:
Feb 6 14:33:52 host1 engine-service.py[25212]: Started engine process 
25213.
Failed to configure handler FILE on Logger '' in context 
org.jboss.logmanager.LogContext@afc824e: Handler FILE has no class name

Exception in thread "main" java.lang.ExceptionInInitializerError
at org.jboss.as.server.Main.main(Main.java:73)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at 
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:57)
at 
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

at java.lang.reflect.Method.invoke(Method.java:601)
at org.jboss.modules.Module.run(Module.java:260)
at org.jboss.modules.Main.main(Main.java:291)
Caused by: java.lang.IllegalStateException: The LogManager was not 
properly installed (you must set the "java.util.logging.manager" 
system property to "org.jboss.logmanager.LogManager")

at org.jboss.logmanager.Logger.getLogger(Logger.java:60)
at 
org.jboss.logmanager.log4j.BridgeRepositorySelector.(BridgeRepositorySelector.java:42)

... 7 more
Feb 6 14:33:53 host1 systemd[1]: ovirt-engine.service: main process 
exited, code=exited, status=1
Feb 6 14:33:53 host1 engine-service.py[25230]: The engine PID file 
"/var/run/ovirt-engine.pid" contains 25213, but that process doesn't 
exist.
Feb 6 14:33:53 host1 systemd[1]: ovirt-engine.service: control process 
exited, code=exited status=1
Feb 6 14:33:53 host1 systemd[1]: Unit ovirt-engine.service entered 
failed state.


Any ideas?

Thanks

Jon







___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users




--
---
舒明 Shu Ming
Open Virtualization Engineerning; CSTL, IBM Corp.
Tel: 86-10-82451626  Tieline: 9051626 E-mail: shum...@cn.ibm.com or 
shum...@linux.vnet.ibm.com
Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, 
Beijing 100193, PRC


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] How to import KVM machine

2013-02-07 Thread Nicolas Ecarnot 

Le 07/02/2013 16:38, Juan Jose a écrit :

Hello everybody again,

I would like to know if exist some process or tutorial to import another
KVM machine from other computer and to have this other KVM VM machine
inside my oVirt system. Is there some process or page that explains this
issue?

Many thanks in avanced,

Juanjo.


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



I'm a beginner but I'm also in this same process so I may help you.

I found this page very helpful :
https://access.redhat.com/knowledge/docs/en-US/Red_Hat_Enterprise_Virtualization/3.1/html-single/V2V_Guide/index.html

--
Nicolas Ecarnot
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] virt-v2v fail - GuestfsHandle.pm error + Redhat.pm error

2013-02-07 Thread Nicolas Ecarnot 

Hi,

After having successfully migrated Debian, XP, 2003, 2008 VMs, I'm stuck 
with a migration I was expecting to be easy : RHAS3.


Here is the error log I get :


# virt-v2v -i libvirt -ic qemu+ssh://@/system -o rhev -os 
:/data/vmexport -of qcow2 -oa sparse -n ovirtmgmt serv-rhas3-vm1
serv-rhas3-vm1_copy.raw: 100% 
[=]D
 0h10m14s
virt-v2v: Pas de capability dans la configuration correspondant à os='linux' 
name='virtio' distro='rhel' major='3' minor='0'
virt-v2v: Pas de capability dans la configuration correspondant à os='linux' 
name='cirrus' distro='rhel' major='3' minor='0'
virt-v2v: WARNING: Le pilote d'affichage a été modifié en cirrus, mais il est 
impossible d'installer le pilote cirrus. X pourrait ne pas fonctionner 
correctement
virt-v2v: WARNING: /boot/grub/device.map fait référence à un périphérique 
/dev/fd0 inconnu. Cette entrée doit être corrigée manuellement après la 
conversion.
virt-v2v: WARNING: /boot/grub/device.map fait référence à un périphérique 
/dev/sda inconnu. Cette entrée doit être corrigée manuellement après la 
conversion.
sh: sh:  at /usr/share/perl5/vendor_perl/Sys/VirtConvert/GuestfsHandle.pm line 
200.
 at /usr/share/perl5/vendor_perl/Sys/VirtConvert/Converter/RedHat.pm line 2321


I don't mind the warnings and I also had such errors I was able to 
correct manually.


But here, the last two lines are lethal.

It seems oVirt tries to guess which OS is imported, and tries to do 
specific actions, and do them bad.
Either there's a way o prevent oVirt from guessing, either there's a way 
to correct the actions oVirt is failing to do...


Googling was not that helpful about this issue.

Regards.

--
Nicolas Ecarnot
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] How to import KVM machine

2013-02-07 Thread Juan Jose 
Hello everybody again,

I would like to know if exist some process or tutorial to import another
KVM machine from other computer and to have this other KVM VM machine
inside my oVirt system. Is there some process or page that explains this
issue?

Many thanks in avanced,

Juanjo.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] snapshot taken while live VM operates cause unresponsive hypervisor behavior

2013-02-07 Thread Dafna Ron 
also full engine, vdsm and libvirtd logs


On 02/07/2013 05:05 PM, Shu Ming wrote:
> The libvirt and qemu version in the VDSM host may help the debugging.
> Alexandru Vladulescu:
>>
>> Hi,
>>
>>
>> Using 3.1.0-3.19 from dreyou's repo on Centos 6.3 version, running
>> multiple VM on the hypervisor node and attempting to take a snapshot
>> from one of the running VMs generates errors for VDSM daemon as show
>> below:
>> /
>> //[root@hyper02 ~]# vdsClient -s 0 list//
>> //Traceback (most recent call last)://
>> //File "/usr/share/vdsm/vdsClient.py", line 2275, in //
>> //code, message = commands[command][0](commandArgs)//
>> //File "/usr/share/vdsm/vdsClient.py", line 280, in do_list//
>> //response = self.s.list(True, vms)//
>> //File "/usr/lib64/python2.6/xmlrpclib.py", line 1199, in __call__//
>> //return self.__send(self.__name, args)//
>> //File "/usr/lib64/python2.6/xmlrpclib.py", line 1489, in __request//
>> //verbose=self.__verbose//
>> //File "/usr/lib64/python2.6/xmlrpclib.py", line 1253, in request//
>> //return self._parse_response(h.getfile(), sock)//
>> //File "/usr/lib64/python2.6/xmlrpclib.py", line 1392, in
>> _parse_response//
>> //return u.close()//
>> //File "/usr/lib64/python2.6/xmlrpclib.py", line 838, in close//
>> //raise Fault(**self._stack[0])//
>> //Fault: :cannot marshal None
>> unless allow_none is enabled">/
>>
>>
>> Paste from ovirt admin GUI log:
>>
>> /2013-Feb-07, 15:29:59 VM ipa01 is down. Exit message: User shut down//
>> //2013-Feb-07, 15:29:34 Migration failed due to Error: Fatal error
>> during migration (VM: ipa01, Source Host: Hyper02).//
>> //2013-Feb-07, 15:29:32 Starting migration of VM ipa01 from Host
>> Hyper02 to Host Hyper01 (User: admin@internal.).//
>> //2013-Feb-07, 15:29:10 Migration failed due to Error: Fatal error
>> during migration (VM: ipa01, Source Host: Hyper02).//
>> //2013-Feb-07, 15:29:10 Migration failed due to Error: Fatal error
>> during migration (VM: ipa01, Source Host: Hyper02). Trying to migrate
>> to another Host.//
>> //2013-Feb-07, 15:29:08 Starting migration of VM ipa01 from Host
>> Hyper02 to Host Hyper01 (User: admin@internal.).//
>> //2013-Feb-07, 15:24:58 Detected new Host Hyper02. Host state was set
>> to Up.//
>> //2013-Feb-07, 15:24:53 Host Hyper02 is initializing. Message:
>> Recovering from crash or Initializing//
>> //2013-Feb-07, 15:22:18 VM ipa01 was resumed by admin@internal (Host:
>> Hyper02).//
>> //2013-Feb-07, 15:22:18 VM ipa01 was resumed by admin@internal (Host:
>> Hyper02).//
>> //2013-Feb-07, 15:20:43 Snapshot [initial installation][after ipa
>> server installation] creation for VM ipa01 has been completed.//
>> //2013-Feb-07, 15:20:43 VM ipa01 has paused due to unknown storage
>> error./
>>
>> Looking through htop command could see that VM were still running and
>> responsive but any vdsclient command failed with the upper code paste
>> I have given. Solution here was to connect to each VM, shut it down
>> and restart vdsmd and power it up again. There's no problem with the
>> storage size as it has aprox 800GB free of space and running through
>> NFS. All nfs mount points were running okay at that time.
>>
>> After the VM has been snapshoot-ed went into pause mode and had to
>> un-pause it from GUI, but the VM was still responsive through network
>> and operations.
>>
>> Has anybody seen something related to this by now or it's just
>> related to 3.1 version ? Mentioning the fact that I did a research on
>> the similar mailing list topics and could not find something related
>> to this error. I would happily provide logs if needed.
>>
>>
>> Regards,
>> Alex
>>
>>
>> ___
>> Users mailing list
>> Users@ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>
>
> -- 
> ---
> 舒明 Shu Ming
> Open Virtualization Engineerning; CSTL, IBM Corp.
> Tel: 86-10-82451626  Tieline: 9051626 E-mail: shum...@cn.ibm.com or 
> shum...@linux.vnet.ibm.com
> Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, 
> Beijing 100193, PRC
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users


-- 
Dafna Ron
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] Problem with Win 7 VM creation

2013-02-07 Thread Juan Jose 
Hello everybody and Antoni,

I have changed my NFS server to my engine machine and finally I have had to
create a Fedora 17 VM machine in my oVirt system and now I'm trying to
create  a Win 7 VM machine and when I want to Run once my machine, in Boot
options I don't have the "virtio-win" driver to attach to floppy VM and
when machine try to install system in virtual hard disk it ask for a driver
for the disk. How can I install this driver and to be attached to my VM
floppy?

Many thanks in avanced,

Juanjo.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] snapshot taken while live VM operates cause unresponsive hypervisor behavior

2013-02-07 Thread Shu Ming 

The libvirt and qemu version in the VDSM host may help the debugging.
Alexandru Vladulescu:


Hi,


Using 3.1.0-3.19 from dreyou's repo on Centos 6.3 version, running 
multiple VM on the hypervisor node and attempting to take a snapshot 
from one of the running VMs generates errors for VDSM daemon as show 
below:

/
//[root@hyper02 ~]# vdsClient -s 0 list//
//Traceback (most recent call last)://
//  File "/usr/share/vdsm/vdsClient.py", line 2275, in //
//code, message = commands[command][0](commandArgs)//
//  File "/usr/share/vdsm/vdsClient.py", line 280, in do_list//
//response = self.s.list(True, vms)//
//  File "/usr/lib64/python2.6/xmlrpclib.py", line 1199, in __call__//
//return self.__send(self.__name, args)//
//  File "/usr/lib64/python2.6/xmlrpclib.py", line 1489, in __request//
//verbose=self.__verbose//
//  File "/usr/lib64/python2.6/xmlrpclib.py", line 1253, in request//
//return self._parse_response(h.getfile(), sock)//
//  File "/usr/lib64/python2.6/xmlrpclib.py", line 1392, in 
_parse_response//

//return u.close()//
//  File "/usr/lib64/python2.6/xmlrpclib.py", line 838, in close//
//raise Fault(**self._stack[0])//
//Fault: :cannot marshal None 
unless allow_none is enabled">/



Paste from ovirt admin GUI log:

/2013-Feb-07, 15:29:59 VM ipa01 is down. Exit message: User shut down//
//2013-Feb-07, 15:29:34 Migration failed due to Error: Fatal error 
during migration (VM: ipa01, Source Host: Hyper02).//
//2013-Feb-07, 15:29:32 Starting migration of VM ipa01 from Host 
Hyper02 to Host Hyper01 (User: admin@internal.).//
//2013-Feb-07, 15:29:10 Migration failed due to Error: Fatal error 
during migration (VM: ipa01, Source Host: Hyper02).//
//2013-Feb-07, 15:29:10 Migration failed due to Error: Fatal error 
during migration (VM: ipa01, Source Host: Hyper02). Trying to migrate 
to another Host.//
//2013-Feb-07, 15:29:08 Starting migration of VM ipa01 from Host 
Hyper02 to Host Hyper01 (User: admin@internal.).//
//2013-Feb-07, 15:24:58 Detected new Host Hyper02. Host state was set 
to Up.//
//2013-Feb-07, 15:24:53 Host Hyper02 is initializing. Message: 
Recovering from crash or Initializing//
//2013-Feb-07, 15:22:18 VM ipa01 was resumed by admin@internal (Host: 
Hyper02).//
//2013-Feb-07, 15:22:18 VM ipa01 was resumed by admin@internal (Host: 
Hyper02).//
//2013-Feb-07, 15:20:43 Snapshot [initial installation][after ipa 
server installation] creation for VM ipa01 has been completed.//

//2013-Feb-07, 15:20:43 VM ipa01 has paused due to unknown storage error./

Looking through htop command could see that VM were still running and 
responsive but any vdsclient command failed with the upper code paste 
I have given. Solution here was to connect to each VM, shut it down 
and restart vdsmd and power it up again. There's no problem with the 
storage size as it has aprox 800GB free of space and running through 
NFS. All nfs mount points were running okay at that time.


After the VM has been snapshoot-ed went into pause mode and had to 
un-pause it from GUI, but the VM was still responsive through network 
and operations.


Has anybody seen something related to this by now or it's just related 
to 3.1 version ? Mentioning the fact that I did a research on the 
similar mailing list topics and could not find something related to 
this error. I would happily provide logs if needed.



Regards,
Alex


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



--
---
?? Shu Ming
Open Virtualization Engineerning; CSTL, IBM Corp.
Tel: 86-10-82451626  Tieline: 9051626 E-mail: shum...@cn.ibm.com or 
shum...@linux.vnet.ibm.com
Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, 
Beijing 100193, PRC

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Unable to boot from CD-ROM (was: REST API: Change boot device / attach CD-ROM)

2013-02-07 Thread Frank Wall 
On Thu, Feb 07, 2013 at 03:15:57PM +0100, Frank Wall wrote:
> Any idea how to debug this further and get a bugfix/working solution?

Using virsh and the "dumpxml" command on the oVirt node I was able
to find the reason for the cd-rom boot problems: the qemu/libvirt 
configuration differs. Have a look at this diff...

--- virsh_normalboot   2013-02-07 15:47:02.584415306 +0100
+++ virsh_runonce  2013-02-07 15:48:49.141540166 +0100
@@ -18,7 +18,6 @@
   
   
 hvm
-
 
   
   
@@ -43,6 +42,7 @@   
 
   
 
   
 
   049339aa-1dd6-4cd7-8c43-cc9bac91a963
   
+  
   

   
  

 

@@ -54,6 +54,7 @@   
  
   
  
 
  
   
  
+  
  

  
  
  
 
  
@@ -74,6 +75,7 @@
   
   
   
+  
   
   
 

First, I configured my VM through the REST API: "virsh_normalboot". 
The second attempt was the "Run Once" feature from the Admin Panel: 
"virsh_runonce".
As you can see this results in different qemu/libvirt configurations, although
I did configure the exactly same thing (boot order + attach cd-rom).

The strange thing is, that the ovirt engine REST API does NOT show any 
difference
in configuration for both scenarios. Look at the next diff...
(normalboot => configured through REST API; runonce => "Run Once" from Admin 
Portal)

--- engine_normalboot  2013-02-07 15:06:38.366216092 +0100
+++ engine_runonce 2013-02-07 15:08:10.218213737 +0100
@@ -48,7 +48,7 @@
 
 
 
-2013-02-07T13:56:55.906Z
+2013-02-07T14:07:40.563Z
 2012-12-22T22:50:52.174+01:00
 ovirt
 false

Both files, "engine_normalboot" and "engine_runonce", are the results of these 
queries:
curl --insecure -X GET -H "Accept: application/xml" -u admin@internal:password 
https://ovirt-engine:8443/api/vms/0a388607-c971-4bfd-a0aa-3a20e967aa1e >> file
curl --insecure -X GET -H "Accept: application/xml" -u admin@internal:password 
https://ovirt-engine:8443/api/vms/0a388607-c971-4bfd-a0aa-3a20e967aa1e/cdroms 
>> file

It seems oVirt Engine does not set the "boot dev" and "boot order" attributes 
correctly through libvirt in some cases. Is this a known bug?


Thanks
- Frank
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Access libvirt/virsh on oVirt node

2013-02-07 Thread Frank Wall 
On Thu, Feb 07, 2013 at 09:36:42AM -0500, Mike Burns wrote:
> You can execute virsh using the -r or --readonly options.  You can't
> change anything that way, obviously, but you should be able to read all
> the information from libvirt.  All changes need to be initiated through
> ovirt-engine and then through vdsm.

Using --readonly works like a charm and does not hurt oVirt. 
This is the way to go! Thank you!


Regards
- Frank
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] Live Upgrade

2013-02-07 Thread Tobias Honacker 
Hi,

is it possible to do a live upgrade e.g. update from 3.0 to 3.1 without any 
downtime?


Best regards,
Tobias
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Access libvirt/virsh on oVirt node

2013-02-07 Thread Dan Kenigsberg 
On Thu, Feb 07, 2013 at 09:33:04AM -0500, Antoni Segura Puimedon wrote:
> Replied inline.
> 
> - Original Message -
> > From: "Frank Wall" 
> > To: users@ovirt.org
> > Sent: Thursday, February 7, 2013 3:25:41 PM
> > Subject: [Users] Access libvirt/virsh on oVirt node
> > 
> > Hi,
> > 
> > how can I access libvirt/virsh on oVirt node? What are the
> > credentials
> > for accessing libvirt/virsh on the command line of a oVirt node?
> 
> You can always set your own credentials for libvirt (without touching those
> of vdsm/oVirt):
> 
> saslpasswd2 -a libvirt foo
> 
> where foo is the new username.

But please note that accessing libvirt without the --readonly flag may
lead to tears. By doing so you revoke the warrenty you never had.

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Access libvirt/virsh on oVirt node

2013-02-07 Thread Shahar Havivi 
On 07.02.13 15:25, Frank Wall wrote:
> Hi,
> 
> how can I access libvirt/virsh on oVirt node? What are the credentials
> for accessing libvirt/virsh on the command line of a oVirt node?
> 
> virsh # list
Try open it for read-only:
$ virsh -r

> Please enter your authentication name: 
> Please enter your password: 
> error: Failed to reconnect to the hypervisor
> error: no valid connection
> error: authentication failed: Failed to step SASL negotiation: -1 (SASL(-1): 
> generic failure: All-whitespace username.)
> 
> 
> It would make debugging things much easier...
> 
> 
> Thanks
> - Frank
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Access libvirt/virsh on oVirt node

2013-02-07 Thread Mike Burns 
On Thu, 2013-02-07 at 09:33 -0500, Antoni Segura Puimedon wrote:
> Replied inline.
> 
> - Original Message -
> > From: "Frank Wall" 
> > To: users@ovirt.org
> > Sent: Thursday, February 7, 2013 3:25:41 PM
> > Subject: [Users] Access libvirt/virsh on oVirt node
> > 
> > Hi,
> > 
> > how can I access libvirt/virsh on oVirt node? What are the
> > credentials
> > for accessing libvirt/virsh on the command line of a oVirt node?
> 
> You can always set your own credentials for libvirt (without touching those
> of vdsm/oVirt):
> 
> saslpasswd2 -a libvirt foo
> 
> where foo is the new username.
> > 
> > virsh # list
> > Please enter your authentication name:
> > Please enter your password:
> > error: Failed to reconnect to the hypervisor
> > error: no valid connection
> > error: authentication failed: Failed to step SASL negotiation: -1
> > (SASL(-1): generic failure: All-whitespace username.)
> > 
> > 
> > It would make debugging things much easier...

You can execute virsh using the -r or --readonly options.  You can't
change anything that way, obviously, but you should be able to read all
the information from libvirt.  All changes need to be initiated through
ovirt-engine and then through vdsm.

Mike

> > 
> > 
> > Thanks
> > - Frank
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> > 
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Access libvirt/virsh on oVirt node

2013-02-07 Thread Antoni Segura Puimedon 
Replied inline.

- Original Message -
> From: "Frank Wall" 
> To: users@ovirt.org
> Sent: Thursday, February 7, 2013 3:25:41 PM
> Subject: [Users] Access libvirt/virsh on oVirt node
> 
> Hi,
> 
> how can I access libvirt/virsh on oVirt node? What are the
> credentials
> for accessing libvirt/virsh on the command line of a oVirt node?

You can always set your own credentials for libvirt (without touching those
of vdsm/oVirt):

saslpasswd2 -a libvirt foo

where foo is the new username.
> 
> virsh # list
> Please enter your authentication name:
> Please enter your password:
> error: Failed to reconnect to the hypervisor
> error: no valid connection
> error: authentication failed: Failed to step SASL negotiation: -1
> (SASL(-1): generic failure: All-whitespace username.)
> 
> 
> It would make debugging things much easier...
> 
> 
> Thanks
> - Frank
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Samples Portal for Ovirt

2013-02-07 Thread Dave Neary 

Thanks Shahar!

On 02/07/2013 02:44 PM, Shahar Havivi wrote:

user - you can view the logged-in user VMs their status and display type.
User can start/stop VM as well as start Spice session in Firefox and IE.

The look and feel is very simple html with no css,
The focus is on the simplicity of the SDK usage.


I think this is perfect - it allows people to envisage the possibilities 
without adding too much scaffolding which channels people in a 
particular direction.



do we have a wiki page about this?

http://www.ovirt.org/SamplesPortals


I moved the page to "Sample_user_portals" which is a little more in line 
with our page naming conventions (no CamelText, use short descriptive 
phrases with sentence capitalisation).


Thanks!
Dave.

--
Dave Neary - Community Action and Impact
Open Source and Standards, Red Hat - http://community.redhat.com
Ph: +33 9 50 71 55 62 / Cell: +33 6 77 01 92 13
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] Access libvirt/virsh on oVirt node

2013-02-07 Thread Frank Wall 
Hi,

how can I access libvirt/virsh on oVirt node? What are the credentials
for accessing libvirt/virsh on the command line of a oVirt node?

virsh # list
Please enter your authentication name: 
Please enter your password: 
error: Failed to reconnect to the hypervisor
error: no valid connection
error: authentication failed: Failed to step SASL negotiation: -1 (SASL(-1): 
generic failure: All-whitespace username.)


It would make debugging things much easier...


Thanks
- Frank
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] Unable to boot from CD-ROM (was: REST API: Change boot device / attach CD-ROM)

2013-02-07 Thread Frank Wall 
On Thu, Jan 03, 2013 at 01:05:00PM +0100, Frank Wall wrote:
> 
>  id="----">
> 
> 
> 
> 
> 
> ...and the boot device is also changed...
> 
> [...]
> 
> 
> 
> [...]
> 
> ...but the VM won't boot off the CD-ROM device, instead it just
> boots from the first harddisk. So what am I doing wrong?

OK, the problem is still NOT solved, but I did some further 
investigation. First, the problem ONLY affects VMs with a bootable 
harddisk (and an operating system installed). 
A newly created VM is NOT affected and is able to boot from CD-ROM. 
Once I install an operating system, the VM will no longer be able 
to boot from CD-ROM. No matter what is configured as boot device...

There is still only the following workaround to boot from CD-ROM:

> The only way I am able to boot from CD-ROM is when using the 
> "Run once" function on the Admin Portal and configure the CD-ROM
> device/image there (temporarely overwriting my config).
> 
> It will NOT work if I configure the CD-ROM device through the REST
> API or the Admin Portal. Just "Run Once" will do the right thing.


Any idea how to debug this further and get a bugfix/working solution?

oVirt is running fine, except this annoying bug makes it somewhat
useless for us.


Thanks
- Frank
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[Users] snapshot taken while live VM operates cause unresponsive hypervisor behavior

2013-02-07 Thread Alexandru Vladulescu 


Hi,


Using 3.1.0-3.19 from dreyou's repo on Centos 6.3 version, running 
multiple VM on the hypervisor node and attempting to take a snapshot 
from one of the running VMs generates errors for VDSM daemon as show below:

/
//[root@hyper02 ~]# vdsClient -s 0 list//
//Traceback (most recent call last)://
//  File "/usr/share/vdsm/vdsClient.py", line 2275, in //
//code, message = commands[command][0](commandArgs)//
//  File "/usr/share/vdsm/vdsClient.py", line 280, in do_list//
//response = self.s.list(True, vms)//
//  File "/usr/lib64/python2.6/xmlrpclib.py", line 1199, in __call__//
//return self.__send(self.__name, args)//
//  File "/usr/lib64/python2.6/xmlrpclib.py", line 1489, in __request//
//verbose=self.__verbose//
//  File "/usr/lib64/python2.6/xmlrpclib.py", line 1253, in request//
//return self._parse_response(h.getfile(), sock)//
//  File "/usr/lib64/python2.6/xmlrpclib.py", line 1392, in 
_parse_response//

//return u.close()//
//  File "/usr/lib64/python2.6/xmlrpclib.py", line 838, in close//
//raise Fault(**self._stack[0])//
//Fault: :cannot marshal None 
unless allow_none is enabled">/



Paste from ovirt admin GUI log:

/2013-Feb-07, 15:29:59 VM ipa01 is down. Exit message: User shut down//
//2013-Feb-07, 15:29:34 Migration failed due to Error: Fatal error 
during migration (VM: ipa01, Source Host: Hyper02).//
//2013-Feb-07, 15:29:32 Starting migration of VM ipa01 from Host Hyper02 
to Host Hyper01 (User: admin@internal.).//
//2013-Feb-07, 15:29:10 Migration failed due to Error: Fatal error 
during migration (VM: ipa01, Source Host: Hyper02).//
//2013-Feb-07, 15:29:10 Migration failed due to Error: Fatal error 
during migration (VM: ipa01, Source Host: Hyper02). Trying to migrate to 
another Host.//
//2013-Feb-07, 15:29:08 Starting migration of VM ipa01 from Host Hyper02 
to Host Hyper01 (User: admin@internal.).//
//2013-Feb-07, 15:24:58 Detected new Host Hyper02. Host state was set to 
Up.//
//2013-Feb-07, 15:24:53 Host Hyper02 is initializing. Message: 
Recovering from crash or Initializing//
//2013-Feb-07, 15:22:18 VM ipa01 was resumed by admin@internal (Host: 
Hyper02).//
//2013-Feb-07, 15:22:18 VM ipa01 was resumed by admin@internal (Host: 
Hyper02).//
//2013-Feb-07, 15:20:43 Snapshot [initial installation][after ipa server 
installation] creation for VM ipa01 has been completed.//

//2013-Feb-07, 15:20:43 VM ipa01 has paused due to unknown storage error./

Looking through htop command could see that VM were still running and 
responsive but any vdsclient command failed with the upper code paste I 
have given. Solution here was to connect to each VM, shut it down and 
restart vdsmd and power it up again. There's no problem with the storage 
size as it has aprox 800GB free of space and running through NFS. All 
nfs mount points were running okay at that time.


After the VM has been snapshoot-ed went into pause mode and had to 
un-pause it from GUI, but the VM was still responsive through network 
and operations.


Has anybody seen something related to this by now or it's just related 
to 3.1 version ? Mentioning the fact that I did a research on the 
similar mailing list topics and could not find something related to this 
error. I would happily provide logs if needed.



Regards,
Alex
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Samples Portal for Ovirt

2013-02-07 Thread Shahar Havivi 
On 07.02.13 14:12, Itamar Heim wrote:
> On 07/02/2013 11:55, Shahar Havivi wrote:
> >On 07.02.13 09:50, Dave Neary wrote:
> >>Hi Shahar,
> >>
> >>This looks great! Do you have screenshots, by any chance? Or are
> >>these all identical to the simple user portal?
> >Yes,
> >They all identical - you have the ability to login/logout as admin and 
> >regular
> >user - you can view the logged-in user VMs their status and display type.
> >User can start/stop VM as well as start Spice session in Firefox and IE.
> >
> >The look and feel is very simple html with no css,
> >The focus is on the simplicity of the SDK usage.
> >
> >Attached screenshot from the Python portal.
> >
> >>
> >>Thanks,
> >>Dave.
> >>
> >>On 02/04/2013 12:04 PM, Shahar Havivi wrote:
> >>>Hey,
> >>>I've recently developed sample User portals written on top of the SDK 
> >>>(Python and Java),
> >>>and Ruby on top of rbovirt (partial REST bindings on top of the oVirt 
> >>>engine).
> >>>All these examples are placed in the samples-userportal git:
> >>>http://gerrit.ovirt.org/gitweb?p=samples-portals.git
> >>>
> >>>Each language portal have its own README file that explain how to run the
> >>>server, the Ruby and Python are self serving application, the java portal 
> >>>is
> >>>hosted in JBoss.
> >>>
> >>>You can use them as additional examples on how to use the SDK for basic VM
> >>>operations,
> >>>
> >>>Shahar Havivi.
> >>>___
> >>>Users mailing list
> >>>Users@ovirt.org
> >>>http://lists.ovirt.org/mailman/listinfo/users
> >>>
> >>
> >>--
> >>Dave Neary - Community Action and Impact
> >>Open Source and Standards, Red Hat - http://community.redhat.com
> >>Ph: +33 9 50 71 55 62 / Cell: +33 6 77 01 92 13
> >>
> >>
> >>___
> >>Users mailing list
> >>Users@ovirt.org
> >>http://lists.ovirt.org/mailman/listinfo/users
> 
> do we have a wiki page about this?
http://www.ovirt.org/SamplesPortals
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Samples Portal for Ovirt

2013-02-07 Thread Itamar Heim 

On 07/02/2013 11:55, Shahar Havivi wrote:

On 07.02.13 09:50, Dave Neary wrote:

Hi Shahar,

This looks great! Do you have screenshots, by any chance? Or are
these all identical to the simple user portal?

Yes,
They all identical - you have the ability to login/logout as admin and regular
user - you can view the logged-in user VMs their status and display type.
User can start/stop VM as well as start Spice session in Firefox and IE.

The look and feel is very simple html with no css,
The focus is on the simplicity of the SDK usage.

Attached screenshot from the Python portal.



Thanks,
Dave.

On 02/04/2013 12:04 PM, Shahar Havivi wrote:

Hey,
I've recently developed sample User portals written on top of the SDK (Python 
and Java),
and Ruby on top of rbovirt (partial REST bindings on top of the oVirt engine).
All these examples are placed in the samples-userportal git:
http://gerrit.ovirt.org/gitweb?p=samples-portals.git

Each language portal have its own README file that explain how to run the
server, the Ruby and Python are self serving application, the java portal is
hosted in JBoss.

You can use them as additional examples on how to use the SDK for basic VM
operations,

Shahar Havivi.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



--
Dave Neary - Community Action and Impact
Open Source and Standards, Red Hat - http://community.redhat.com
Ph: +33 9 50 71 55 62 / Cell: +33 6 77 01 92 13


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users


do we have a wiki page about this?
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Error while executing action Setup Networks

2013-02-07 Thread Tomas Jelinek 
FYI it is now documented here: http://wiki.ovirt.org/Download

Tomas

- Original Message -
From: "Tomas Jelinek" 
To: "Stephen Sallee (Jake)" 
Cc: users@ovirt.org
Sent: Thursday, February 7, 2013 9:32:20 AM
Subject: Re: [Users] Error while executing action Setup Networks

> Also, I noticed that the interface for assigning virtual networks to physical 
> interfaces does NOT work correctly in the latest version of google chrome.  I 
> had to flip into firefox ... I'm not sure if > that is documented any where.
Well, google chrome is not officially supported browser. It works more or less, 
but you can not rely on it. 

The supported browsers are:
On Linux the Firefox 17 and on Windows IE >= 9. 

Web admin should have shown you a warning message that the current browser is 
not supported. But after a quick look at the wiki I did not find any mention 
about it.
We should definitely add it somewhere, I'll try to find a suitable place.

Thanx for mentioning it,
Tomas

- Original Message -
From: "Stephen Sallee (Jake)" 
To: users@ovirt.org
Sent: Thursday, February 7, 2013 4:35:03 AM
Subject: Re: [Users] Error while executing action Setup Networks

I found the issue, there is a little icon of a pencil that you need to click on 
in order to specify what IP you want the connection to use. Once I did that it 
worked perfectly.

Also, I noticed that the interface for assigning virtual networks to physical 
interfaces does NOT work correctly in the latest version of google chrome.  I 
had to flip into firefox ... I'm not sure if that is documented any where.

I tried to post this to the list earlier today but my message did not go to the 
list only directly to myself ... sorry for wasting your time.


Jake Sallee
Godfather of Bandwidth
Network Engineer
University of Mary Hardin-Baylor

900 College St.
Belton, Texas
76513

Fone: 254-295-4658
Phax: 254-295-4221


From: users-boun...@ovirt.org [users-boun...@ovirt.org] on behalf of Antoni 
Segura Puimedon [asegu...@redhat.com]
Sent: Wednesday, February 06, 2013 5:07 PM
To: users@ovirt.org
Subject: Re: [Users] Error while executing action Setup Networks

Hi,

I can see that you set a PREFIX, but I can't see any IPADDR in the ifcfg-eth0, 
nor
in the setupNetworks command. Which IPADDR do you intend to set?


- Original Message -
> From: "Stephen Sallee (Jake)" 
> To: users@ovirt.org
> Sent: Wednesday, February 6, 2013 6:50:14 PM
> Subject: [Users] Error while executing action Setup Networks
>
> I'm trying to add the ovirtmgmt role to my network connection on my
> all-in-one box but when I do I get this error:
>
> Error while executing action Setup Networks: Illegal or Incomplete IP
> Address
>
> The IP is correct as I am accessing the portal from a different
> computer, also when I look at the ifcfg-eth0 file:
>
> DEVICE=eth0
> ONBOOT=yes
> HWADDR=[REDACTED]
> BRIDGE=ovirtmgmt
> NM_CONTROLLED=yes
> DOMAIN=UMHB.edu
> IPV6INIT=no
> LAST_CONNECT=1360136903
> DNS2=[REDACTED]
> DNS1=[REDACTED]
> DEFROUTE=yes
> IPV4_FAILURE_FATAL=yes
> PREFIX=24
> UUID=[REDACTED] ... it just feels right, i know its probably useless
> to a hacker but I fell better, okay?
>
> I have tried NM_CONTROLLED=yes and NM_CONTROLLED=no , with no
> difference.
>
> Here is the snippet from the engine log:
>
> [root@otto ~]# tail -f /var/log/ovirt-engine/engine.log
> 2013-02-06 11:20:00,001 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-43) Autorecovering hosts is disabled,
> skipping
> 2013-02-06 11:20:00,001 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-43) Autorecovering storage domains is
> disabled, skipping
> 2013-02-06 11:25:00,001 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-98) Autorecovering hosts is disabled,
> skipping
> 2013-02-06 11:25:00,001 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-98) Autorecovering storage domains is
> disabled, skipping
> 2013-02-06 11:30:00,000 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-60) Autorecovering hosts is disabled,
> skipping
> 2013-02-06 11:30:00,000 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-60) Autorecovering storage domains is
> disabled, skipping
> 2013-02-06 11:35:00,001 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-11) Autorecovering hosts is disabled,
> skipping
> 2013-02-06 11:35:00,001 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-11) Autorecovering storage domains is
> disabled, skipping
> 2013-02-06 11:40:00,001 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-65) Autorecovering hosts is disabled,
> skipping
> 2013-02-06 11:40:00,001 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-65) Autorecovering storage domains is
> disabled, sk

Re: [Users] how to add a user

2013-02-07 Thread Juan Jose 
On Thu, Feb 7, 2013 at 5:30 AM, Yair Zaslavsky  wrote:

> Please check if you see errors at logs -
> /var/log/ovirt-engine/engine-manage-domains.log
> And let us know what are the errors.
> As Itamar asked - what is the directory service you are using? (what
> parameter is passed to -provider option?)
> Since we use kerberos authentication, there are some configurations that
> should be taken care of (have SRV records for the domain for
> both kerberos and ldap -
> check -
>
> dig SRV _ldap._tcp.your.domain.com
> dig SRV _kerberos._tcp.your.domain.com
> dig SRV _kerberos._udp.your.domain.com
>
> You should also have a PTR record to your directory service machine.
>
> You also need to have a time difference between your oVirt engine machine
> and the directory service machine of no more than +- 5 minutes.
>
>
> Hope this helps out,
> Yair
>
>
>
>
>
>
> - Original Message -
> > From: "Itamar Heim" 
> > To: "Jonathan Horne" 
> > Cc: users@ovirt.org
> > Sent: Wednesday, February 6, 2013 8:27:01 PM
> > Subject: Re: [Users] how to add a user
> >
> > On 06/02/2013 19:03, Jonathan Horne wrote:
> > > Im using ovrit 3.1, and I'm trying to add a user to the web
> > > console.
> > >   But the new button brings up a popup that doesn't have any
> > >   buttons on
> > > it.  Can I use the engine-manage-domains tool, and if yes what is
> > > the
> > > syntax?  So far what I have found on google is just getting me
> > > authentication errors, so I'm sure I'm doing it wrong.
> > >
> > > Thanks,
> > > jonathan
> > >
> > >
> 
> > > This is a PRIVATE message. If you are not the intended recipient,
> > > please
> > > delete without copying and kindly advise us by e-mail of the
> > > mistake in
> > > delivery. NOTE: Regardless of content, this e-mail shall not
> > > operate to
> > > bind SKOPOS to any order or other contract unless pursuant to
> > > explicit
> > > written agreement or government initiative expressly permitting the
> > > use
> > > of e-mail for such purpose.
> > >
> > >
> > > ___
> > > Users mailing list
> > > Users@ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> > >
> >
> > which type of domain are you trying to add? what is the command line
> > the
> > error?
> > ___
> > Users mailing list
> > Users@ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Samples Portal for Ovirt

2013-02-07 Thread Shahar Havivi 
On 07.02.13 09:50, Dave Neary wrote:
> Hi Shahar,
> 
> This looks great! Do you have screenshots, by any chance? Or are
> these all identical to the simple user portal?
Yes,
They all identical - you have the ability to login/logout as admin and regular
user - you can view the logged-in user VMs their status and display type.
User can start/stop VM as well as start Spice session in Firefox and IE.

The look and feel is very simple html with no css,
The focus is on the simplicity of the SDK usage.

Attached screenshot from the Python portal.

> 
> Thanks,
> Dave.
> 
> On 02/04/2013 12:04 PM, Shahar Havivi wrote:
> >Hey,
> >I've recently developed sample User portals written on top of the SDK 
> >(Python and Java),
> >and Ruby on top of rbovirt (partial REST bindings on top of the oVirt 
> >engine).
> >All these examples are placed in the samples-userportal git:
> >http://gerrit.ovirt.org/gitweb?p=samples-portals.git
> >
> >Each language portal have its own README file that explain how to run the
> >server, the Ruby and Python are self serving application, the java portal is
> >hosted in JBoss.
> >
> >You can use them as additional examples on how to use the SDK for basic VM
> >operations,
> >
> >Shahar Havivi.
> >___
> >Users mailing list
> >Users@ovirt.org
> >http://lists.ovirt.org/mailman/listinfo/users
> >
> 
> -- 
> Dave Neary - Community Action and Impact
> Open Source and Standards, Red Hat - http://community.redhat.com
> Ph: +33 9 50 71 55 62 / Cell: +33 6 77 01 92 13
<>___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Samples Portal for Ovirt

2013-02-07 Thread Dave Neary 

Hi Shahar,

This looks great! Do you have screenshots, by any chance? Or are these 
all identical to the simple user portal?


Thanks,
Dave.

On 02/04/2013 12:04 PM, Shahar Havivi wrote:

Hey,
I've recently developed sample User portals written on top of the SDK (Python 
and Java),
and Ruby on top of rbovirt (partial REST bindings on top of the oVirt engine).
All these examples are placed in the samples-userportal git:
http://gerrit.ovirt.org/gitweb?p=samples-portals.git

Each language portal have its own README file that explain how to run the
server, the Ruby and Python are self serving application, the java portal is
hosted in JBoss.

You can use them as additional examples on how to use the SDK for basic VM
operations,

Shahar Havivi.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users



--
Dave Neary - Community Action and Impact
Open Source and Standards, Red Hat - http://community.redhat.com
Ph: +33 9 50 71 55 62 / Cell: +33 6 77 01 92 13
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [Users] Error while executing action Setup Networks

2013-02-07 Thread Tomas Jelinek 
> Also, I noticed that the interface for assigning virtual networks to physical 
> interfaces does NOT work correctly in the latest version of google chrome.  I 
> had to flip into firefox ... I'm not sure if > that is documented any where.
Well, google chrome is not officially supported browser. It works more or less, 
but you can not rely on it. 

The supported browsers are:
On Linux the Firefox 17 and on Windows IE >= 9. 

Web admin should have shown you a warning message that the current browser is 
not supported. But after a quick look at the wiki I did not find any mention 
about it.
We should definitely add it somewhere, I'll try to find a suitable place.

Thanx for mentioning it,
Tomas

- Original Message -
From: "Stephen Sallee (Jake)" 
To: users@ovirt.org
Sent: Thursday, February 7, 2013 4:35:03 AM
Subject: Re: [Users] Error while executing action Setup Networks

I found the issue, there is a little icon of a pencil that you need to click on 
in order to specify what IP you want the connection to use. Once I did that it 
worked perfectly.

Also, I noticed that the interface for assigning virtual networks to physical 
interfaces does NOT work correctly in the latest version of google chrome.  I 
had to flip into firefox ... I'm not sure if that is documented any where.

I tried to post this to the list earlier today but my message did not go to the 
list only directly to myself ... sorry for wasting your time.


Jake Sallee
Godfather of Bandwidth
Network Engineer
University of Mary Hardin-Baylor

900 College St.
Belton, Texas
76513

Fone: 254-295-4658
Phax: 254-295-4221


From: users-boun...@ovirt.org [users-boun...@ovirt.org] on behalf of Antoni 
Segura Puimedon [asegu...@redhat.com]
Sent: Wednesday, February 06, 2013 5:07 PM
To: users@ovirt.org
Subject: Re: [Users] Error while executing action Setup Networks

Hi,

I can see that you set a PREFIX, but I can't see any IPADDR in the ifcfg-eth0, 
nor
in the setupNetworks command. Which IPADDR do you intend to set?


- Original Message -
> From: "Stephen Sallee (Jake)" 
> To: users@ovirt.org
> Sent: Wednesday, February 6, 2013 6:50:14 PM
> Subject: [Users] Error while executing action Setup Networks
>
> I'm trying to add the ovirtmgmt role to my network connection on my
> all-in-one box but when I do I get this error:
>
> Error while executing action Setup Networks: Illegal or Incomplete IP
> Address
>
> The IP is correct as I am accessing the portal from a different
> computer, also when I look at the ifcfg-eth0 file:
>
> DEVICE=eth0
> ONBOOT=yes
> HWADDR=[REDACTED]
> BRIDGE=ovirtmgmt
> NM_CONTROLLED=yes
> DOMAIN=UMHB.edu
> IPV6INIT=no
> LAST_CONNECT=1360136903
> DNS2=[REDACTED]
> DNS1=[REDACTED]
> DEFROUTE=yes
> IPV4_FAILURE_FATAL=yes
> PREFIX=24
> UUID=[REDACTED] ... it just feels right, i know its probably useless
> to a hacker but I fell better, okay?
>
> I have tried NM_CONTROLLED=yes and NM_CONTROLLED=no , with no
> difference.
>
> Here is the snippet from the engine log:
>
> [root@otto ~]# tail -f /var/log/ovirt-engine/engine.log
> 2013-02-06 11:20:00,001 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-43) Autorecovering hosts is disabled,
> skipping
> 2013-02-06 11:20:00,001 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-43) Autorecovering storage domains is
> disabled, skipping
> 2013-02-06 11:25:00,001 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-98) Autorecovering hosts is disabled,
> skipping
> 2013-02-06 11:25:00,001 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-98) Autorecovering storage domains is
> disabled, skipping
> 2013-02-06 11:30:00,000 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-60) Autorecovering hosts is disabled,
> skipping
> 2013-02-06 11:30:00,000 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-60) Autorecovering storage domains is
> disabled, skipping
> 2013-02-06 11:35:00,001 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-11) Autorecovering hosts is disabled,
> skipping
> 2013-02-06 11:35:00,001 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-11) Autorecovering storage domains is
> disabled, skipping
> 2013-02-06 11:40:00,001 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-65) Autorecovering hosts is disabled,
> skipping
> 2013-02-06 11:40:00,001 INFO
>  [org.ovirt.engine.core.bll.AutoRecoveryManager]
> (QuartzScheduler_Worker-65) Autorecovering storage domains is
> disabled, skipping
> 2013-02-06 11:40:46,131 INFO
>  [org.ovirt.engine.core.bll.SetupNetworksCommand]
> (ajp--127.0.0.1-8702-2) [6cf1af54] Running command:
> SetupNetworksCommand internal: false. Entities affected :  ID:
> 8a682fca-7032-11e2-8be0-cb1656457e1f Type: VDS
> 2013-02-06 11:40:46,1

Re: [Users] How to import KVM machines into oVirt iSCSI

2013-02-07 Thread Nicolas Ecarnot 

Le 06/02/2013 11:20, Itamar Heim a écrit :

Hu ho, I think I hit this bug :

http://thr3ads.net/libguestfs/2011/11/1623975-Virtio-win-RPM
and
http://thr3ads.net/libguestfs/2011/11/1624040-Windows-P2V-migration-temporary-recipe



I have a RHN account, so I was able to download the missing virtio-win
rpm and install it on F17 (seemless).
Import is now working for windows guest, though some more errors are to
be treated manually (eth virtio errors), but harmless.



how about wiki-fying this thread for others?

Thanks,
Itamar


Hi Itamar, Hi people,

I don't know if your proposal was directed to me, but I just *found* 
this thread, but never wrote anything into it, so you'd better ask 
concerned people about their writings.


Regards,

--
Nicolas Ecarnot
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users