Re: [Users] Ovirt guest agent for 3.2 el6
On Tue, Oct 1, 2013 at 3:53 PM, Vinzenz Feenstra vfeen...@redhat.comwrote: On 09/30/2013 09:51 AM, Vinzenz Feenstra wrote: On 09/15/2013 01:34 AM, Andrew Lau wrote: On Fri, Sep 13, 2013 at 5:20 AM, Joop jvdw...@xs4all.nl wrote: Itamar Heim wrote: On 09/12/2013 08:16 PM, Joop wrote: Itamar Heim ih...@redhat.com wrote: On 09/12/2013 12:17 PM, noc wrote: Is it possible to add an ovirt-guest-agent-1.0.8-el6.rpm to the ovirt 3.2 repository? I'm asking because I tried the ovirt-guest-agent installation on a VM by slightly modifying the repo file to point to the 3.3 directory and the dependencies that were used were only from epel. Regards, Joop can you please clarify a bit more why you can't use the 3.3 repo? One thing 3.3 isn't yet available and second I'm still on 3.2 and would like keep the amount of admin to a minimum. i may got the versions wrong, but it sounds like you are asking to release the 3.3 version to 3.2 users? (this is only for the guest, so doesn't affect the engine and hosts) Yes, since ovirt-guest-agent for ovirt-3.3 does work for 3.2 too it would be nice to have the guest-agent available in the 3.2 repo too instead of adding a, coming, 3.3 repo in a 3.2 environment. Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Fedora seems to have ovirt-guest-agent-common in it's default repo, whereas EL6 does not have any (even in EPEL) is this correct? It would be nice to have it readily available instead of having to install a repo just for one package. The EPEL6 package is now available in the updates repository. You should now be able to install the ovirt-guest-agent from EPEL Awesome! The EPEL6 package is here: http://koji.fedoraproject.org/koji/buildinfo?buildID=456118 Joop, I tried installing just the RPM alone from the 3.3 repo and that worked fine, that could be a workaround? It is ok to use it, however you'll have some errors in the VDSM log about an unknown 'fqdn' message sent by the guest agent. Which you can ignore, it is not creating any problems, besides some log messages. ___ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users -- Regards, Vinzenz Feenstra | Senior Software Engineer RedHat Engineering Virtualization R D Phone: +420 532 294 625 IRC: vfeenstr or evilissimo Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing listUsers@ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users -- Regards, Vinzenz Feenstra | Senior Software Engineer RedHat Engineering Virtualization R D Phone: +420 532 294 625 IRC: vfeenstr or evilissimo Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] oVirt Node Hypervisor 2.6.1 on oVirt 3.3 fails
- Original Message - Hi Mike, Hi Udaya, Can I add oVirt Node Hypervisor 2.6.1 (f18) to the oVirt3.3 Engine setup on f19..? Do I need to setup a new oVirt Node Hypervisor for oVirt3.3? I got an error - Host .xxx.xxx installation failed. Unexpected connection termination - after approving the host in the oVirt Web Administration portal. Can you please attach the relevant logs from the engine/node for this error? Please suggest. Thank You. Regards, Udaya Kiran ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VMs and volumes disappearing
Hi, I have recently set up an oVirt environment, I think in a pretty standard fashion, with engine 3.3 on one host, one oVirt host on a physical machine, both running CentOS 6.4, using NFS for all storage domains. Please provide rpm -qa on the ovirt rpms (ovirt engine). martijn@ovirt:~ rpm -qa | grep ovirt ovirt-log-collector-3.3.0-1.el6.noarch ovirt-engine-3.3.0-1.el6.noarch ovirt-host-deploy-1.1.1-1.el6.noarch ovirt-engine-cli-3.3.0.4-1.el6.noarch ovirt-engine-userportal-3.3.0-1.el6.noarch ovirt-engine-tools-3.3.0-1.el6.noarch ovirt-engine-setup-3.3.0-4.el6.noarch ovirt-engine-sdk-python-3.3.0.6-1.el6.noarch ovirt-image-uploader-3.3.0-1.el6.noarch ovirt-engine-restapi-3.3.0-1.el6.noarch ovirt-engine-webadmin-portal-3.3.0-1.el6.noarch ovirt-host-deploy-java-1.1.1-1.el6.noarch ovirt-engine-backend-3.3.0-1.el6.noarch ovirt-release-el6-8-1.noarch ovirt-iso-uploader-3.3.0-1.el6.noarch ovirt-engine-dbscripts-3.3.0-1.el6.noarch ovirt-engine-lib-3.3.0-4.el6.noarch Today I was playing around with snapshots, when I noticed that the Snapshots panel didn't show any of the snapshots I created, not even the 'Current - Active VM' snapshot that all VMs have. Not sure why this has happened. How do you know that snapshot creation was completed? Did you look at the events tab? (Asking to be sure) engine.log will be quite helpful here. I find engine.log somewhat hard to read, to be honest, and documentation is hard to find, but I think I found some clues. I tried to create 4 snapshots of a certain VM, 2 of which completed normally and 2 of which failed: Failed with VDSM error SNAPSHOT_FAILED and code 48 However, what I find most upsetting, is that the VMs that disappeared were not the subject of my experiments. I was creating snapshots of a single VM, and the VMs that disappeared were unrelated. As a matter of fact, the VM I was experimenting with IS THE ONLY ONE that survived. By the way, the Snapshots panel has been displaying snapshots correctly for a while, but when I logged in this morning, it appeared empty again, for all VMs. Is there anything I can check to see what causes this? Not sure what to do, I decided to restart the ovirt-engine process. When I logged back on to the administrator panel, I was shocked to see 2endWith of my 4 VMs completely missing from the inventory. I haven't been able to find back a single trace of either machine, neither in the portal nor on disk. It seems like they never existed. The storage of both VMs seems to be erased from the data domain. Not sure why storage domain was erased. About Vms disappeared - there were previous discussions on that at users@ovirt.org. In a nutshell, due to a bug (that was already fixed) prior to the restart you might have had records at thetable that contained value of empty guid (a string in UUID format with only 0 and - ) at the vdsm_task_id_column. This means that the task is not associated with a real SPM task, and when the engine restarts, if for a given flow (let's say - snapshot creation) there are tasks with such vdsm_task_id, the flow will end with failure. For some flows , ending with failure means erasing the vm (for example - real failure of importing a vm). By the way, similar issue can probably occur with disks as well, as there are flows that run async tasks that deal with disks. I think I have an idea about what happended now. The 2 disappeared VMs have been imported into oVirt using virt-v2v. The 3rd one that's now missing a disk volume was not, but I have been playing with storage migration in the past. Yesterday's engine.log seems to suggest, that all of these tasks (importing the 2 VMs and trying to move a volume) have been restarted immediately after restarting Engine. After failure, the VMs and volume were removed. It seems to fit the above description of the bug. So... What can I do to prevent this from happening again? Should I periodically check the 'async_tasks' table for anomalies? Is there a bugfix I can apply, or should I wait for a new release of oVirt? If the latter, when is that expected to happen? Thanks, Martijn. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VMs and volumes disappearing
- Original Message - From: Martijn Grendelman martijn.grendel...@isaac.nl To: users@ovirt.org Sent: Tuesday, October 1, 2013 12:29:58 PM Subject: Re: [Users] VMs and volumes disappearing Hi, I have recently set up an oVirt environment, I think in a pretty standard fashion, with engine 3.3 on one host, one oVirt host on a physical machine, both running CentOS 6.4, using NFS for all storage domains. Please provide rpm -qa on the ovirt rpms (ovirt engine). martijn@ovirt:~ rpm -qa | grep ovirt ovirt-log-collector-3.3.0-1.el6.noarch ovirt-engine-3.3.0-1.el6.noarch ovirt-host-deploy-1.1.1-1.el6.noarch ovirt-engine-cli-3.3.0.4-1.el6.noarch ovirt-engine-userportal-3.3.0-1.el6.noarch ovirt-engine-tools-3.3.0-1.el6.noarch ovirt-engine-setup-3.3.0-4.el6.noarch ovirt-engine-sdk-python-3.3.0.6-1.el6.noarch ovirt-image-uploader-3.3.0-1.el6.noarch ovirt-engine-restapi-3.3.0-1.el6.noarch ovirt-engine-webadmin-portal-3.3.0-1.el6.noarch ovirt-host-deploy-java-1.1.1-1.el6.noarch ovirt-engine-backend-3.3.0-1.el6.noarch ovirt-release-el6-8-1.noarch ovirt-iso-uploader-3.3.0-1.el6.noarch ovirt-engine-dbscripts-3.3.0-1.el6.noarch ovirt-engine-lib-3.3.0-4.el6.noarch Today I was playing around with snapshots, when I noticed that the Snapshots panel didn't show any of the snapshots I created, not even the 'Current - Active VM' snapshot that all VMs have. Not sure why this has happened. How do you know that snapshot creation was completed? Did you look at the events tab? (Asking to be sure) engine.log will be quite helpful here. I find engine.log somewhat hard to read, to be honest, and documentation is hard to find, but I think I found some clues. Hi, I understand what you're saying about engine.log, when I asked for it, it was because I'm one of the maintainers of ovirt engine, so I thought I could give you a hand here, especially after reading your email and getting a sense that I saw a similar issue in the past. I tried to create 4 snapshots of a certain VM, 2 of which completed normally and 2 of which failed: Failed with VDSM error SNAPSHOT_FAILED and code 48 However, what I find most upsetting, is that the VMs that disappeared were not the subject of my experiments. I was creating snapshots of a single VM, and the VMs that disappeared were unrelated. As a matter of fact, the VM I was experimenting with IS THE ONLY ONE that survived. By the way, the Snapshots panel has been displaying snapshots correctly for a while, but when I logged in this morning, it appeared empty again, for all VMs. Is there anything I can check to see what causes this? Not sure what to do, I decided to restart the ovirt-engine process. When I logged back on to the administrator panel, I was shocked to see 2endWith of my 4 VMs completely missing from the inventory. I haven't been able to find back a single trace of either machine, neither in the portal nor on disk. It seems like they never existed. The storage of both VMs seems to be erased from the data domain. Not sure why storage domain was erased. About Vms disappeared - there were previous discussions on that at users@ovirt.org. In a nutshell, due to a bug (that was already fixed) prior to the restart you might have had records at the table that contained value of empty guid (a string in UUID format with only 0 and - ) at the vdsm_task_id_column. This means that the task is not associated with a real SPM task, and when the engine restarts, if for a given flow (let's say - snapshot creation) there are tasks with such vdsm_task_id, the flow will end with failure. For some flows , ending with failure means erasing the vm (for example - real failure of importing a vm). By the way, similar issue can probably occur with disks as well, as there are flows that run async tasks that deal with disks. I think I have an idea about what happended now. The 2 disappeared VMs have been imported into oVirt using virt-v2v. The 3rd one that's now missing a disk volume was not, but I have been playing with storage migration in the past. Then this is the reason, other users have complained about it at users@ovirt.org Yesterday's engine.log seems to suggest, that all of these tasks (importing the 2 VMs and trying to move a volume) have been restarted immediately after restarting Engine. After failure, the VMs and volume were removed. It seems to fit the above description of the bug. So... What can I do to prevent this from happening again? Should I periodically check the 'async_tasks' table for anomalies? Is there a bugfix I can apply, or should I wait for a new release of oVirt? If the latter, when is that expected to happen? Upgrade I just talked with Ofer (CC'ed), our release engineer, and he said that all packages should be 3.3.0-4 (notice ovirt-engine is not) I hope this helps you out, Yair Thanks, Martijn.
Re: [Users] VMs and volumes disappearing
Hello Yair, Thank you for your answers, but I still have some questions left ;-) I find engine.log somewhat hard to read, to be honest, and documentation is hard to find, but I think I found some clues. Hi, I understand what you're saying about engine.log, when I asked for it, it was because I'm one of the maintainers of ovirt engine, so I thought I could give you a hand here, especially after reading your email and getting a sense that I saw a similar issue in the past. If you want, I can send you my log. I wasn't sure if that's what you meant. I just had the same problem again. - Stopped oVirt engine - Checked the 'async_tasks' table. It was empty! - Started oVirt engine - Same set of imported VMs as last time deleted! I thought that lingering records from the 'async_tasks' table were to blame, but apparently, that's not the case. Can you tell me what I need to check/do/modify/update/delete before restarting oVirt that will keep my VMs from being deleted? (Please see below for a note on upgrading like you suggested) I think I have an idea about what happended now. The 2 disappeared VMs have been imported into oVirt using virt-v2v. The 3rd one that's now missing a disk volume was not, but I have been playing with storage migration in the past. Then this is the reason, other users have complained about it at users@ovirt.org I have read the thread about disappearing VMs from August and indeed it sounds like this might me the same problem. Upgrade I just talked with Ofer (CC'ed), our release engineer, and he said that all packages should be 3.3.0-4 (notice ovirt-engine is not) I hope this helps you out, There are no updates, at least Yum doesn't give me any. I enabled the beta channel just now, but that doesn't make a difference. 3.3.0-1 is the latest version. What am I missing? martijn@ovirt:~ sudo yum list all|grep ovirt-engine.noarch ovirt-engine.noarch 3.3.0-1.el6@ovirt-beta Best regards, Martijn Grendelman ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VMs and volumes disappearing
- Original Message - From: Martijn Grendelman martijn.grendel...@isaac.nl To: Yair Zaslavsky yzasl...@redhat.com Cc: users@ovirt.org, Ofer Schreiber oschr...@redhat.com Sent: Tuesday, October 1, 2013 2:59:27 PM Subject: Re: [Users] VMs and volumes disappearing Hello Yair, Thank you for your answers, but I still have some questions left ;-) I find engine.log somewhat hard to read, to be honest, and documentation is hard to find, but I think I found some clues. Hi, I understand what you're saying about engine.log, when I asked for it, it was because I'm one of the maintainers of ovirt engine, so I thought I could give you a hand here, especially after reading your email and getting a sense that I saw a similar issue in the past. If you want, I can send you my log. I wasn't sure if that's what you meant. I just had the same problem again. - Stopped oVirt engine - Checked the 'async_tasks' table. It was empty! - Started oVirt engine - Same set of imported VMs as last time deleted! I thought that lingering records from the 'async_tasks' table were to blame, but apparently, that's not the case. Can you tell me what I need to check/do/modify/update/delete before restarting oVirt that will keep my VMs from being deleted? (Please see below for a note on upgrading like you suggested) make sure you dont have records at async_tasks with vdsm_task_id of empty guid - but i'm really not in favor of such hacks, this is a hack. I strongly suggest you solve upgrade issue (please communicate with ofer on this). I think I have an idea about what happended now. The 2 disappeared VMs have been imported into oVirt using virt-v2v. The 3rd one that's now missing a disk volume was not, but I have been playing with storage migration in the past. Then this is the reason, other users have complained about it at users@ovirt.org I have read the thread about disappearing VMs from August and indeed it sounds like this might me the same problem. Upgrade I just talked with Ofer (CC'ed), our release engineer, and he said that all packages should be 3.3.0-4 (notice ovirt-engine is not) I hope this helps you out, There are no updates, at least Yum doesn't give me any. I enabled the beta channel just now, but that doesn't make a difference. 3.3.0-1 is the latest version. What am I missing? martijn@ovirt:~ sudo yum list all|grep ovirt-engine.noarch ovirt-engine.noarch 3.3.0-1.el6@ovirt-beta I'll let ofer answer that. Best regards, Martijn Grendelman ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VMs and volumes disappearing
Hi, I just had the same problem again. - Stopped oVirt engine - Checked the 'async_tasks' table. It was empty! - Started oVirt engine - Same set of imported VMs as last time deleted! I thought that lingering records from the 'async_tasks' table were to blame, but apparently, that's not the case. Can you tell me what I need to check/do/modify/update/delete before restarting oVirt that will keep my VMs from being deleted? (Please see below for a note on upgrading like you suggested) make sure you dont have records at async_tasks with vdsm_task_id of empty guid - but i'm really not in favor of such hacks, this is a hack. I strongly suggest you solve upgrade issue (please communicate with ofer on this). OK, I understand that, but for the record: 'async_tasks' was completely empty before I started Engine, so this hack wouldn't have been of any use. Cheers, Martijn. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Could not login into the iscsi domain
On 27/09/13 20:29, Saurabh wrote: Hi guyz, I have setup my ovirt engine with NFS as datacenter storage, so the default datacenter has nfs storage. Now have created a test datacenter inside ovirt with Type = iscsi. When I try to add new storage domain to this datacenter, I am able to discover the Lun but could not log in. Any help will be much appreciated. Thanks Saurabh ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users sorted out my problem. No more trouble now!! :) -- Saurabh Kumar (RHCSA,RHCE,RHCVA) System Administrator FOR AND ON BEHALF OF: Technology Blueprint Ltd 23 Clemens Street Royal Leamington Spa Warwickshire CV31 2DW E: saurabh.ku...@techblue.co.uk W: www.technologyblueprint.co.uk www.propco.co.uk The contents of this email are confidential and may be privileged, and are intended only for the use of the person or company named herein. Any views or opinions presented are solely those of the author and do not necessarily represent those of Technology Blueprint Limited. If you are not the intended recipient of this email or a person responsible for delivering it to the intended recipient, you are hereby notified that any distribution, copying or dissemination of the information herein is strictly prohibited ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Could not add iscsi domain to data-center
On 30/09/13 14:37, Saurabh wrote: Hi all, I am using ovirt 3.3 on Centos6. Things were running fine untill I had nfs as the deata storage for my data center. Now I have created a new data center of type iscsi, but I am not able to add the iscsi storage to this Datacenter. This is all what i did. 1I created a new datacenter of type iscsi 2configured a cluster to this datacenter 3moved my host to this cluster. 4Now navigated to the storage tab 5Clicked on new domain 6selected data/iscsi 7discovered the iscsi iqn but when I login to that iqn the login is not successful. I am attaching you a screenshot. Thanks. saurabh. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users resolved the problem!! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] iptables settings/scripts ovirt 3.3
Hi, we have an test environment with ovirt 3.3 installed on various hardware nodes. The management node is installed on an centos 6.4 x64 minimal. The issue we are running into is, that some ovirt component keeps resetting the iptables firewall configuration, denying access to ports 80 and 443, which results in the web interface being not accessible. We do know that the engine-setup initially configures the firewall, but through which scripts does iptables get configured? Are there some database entries for this? If you need any logfiles for this, please let me know. Currently we have disabled iptables, as it's just an test environment. We read about some vdsm bootstrap script (e.g. BZ 893680), may this be related? However we didn't find out where this scripts resides. Also vvyaz...@redhat.com posted in this BZ: not a bug. I don't see why you shouldn't be able to ping the hypervisor in the management lan? this is useful for monitoring and network debugging. ICMP is no danger at all. Kind regards Sven Kieske ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] iSCSI domain
On 09/30/2013 12:36 PM, Jakub Bittner wrote: Hello, I have to change iSCSI data domain (master) ip address. I am using oVirt 3.3 latest stable and I wonder if there is another (easier) way to change master domain IP than to export all VMs and import them to newly created domain with new IP. Please could you anyone point me how to do that? Thank you. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users I'm not sure if in 3.3 or there was an issue fixed only for 3.3.1 but you should be able to edit (via the rest api) the connection. alissa can give more details on the how. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VMs and volumes disappearing
In order to upgrade, it would be 'engine-setup' :-) -- Best regards, Alex Lourie Software Developer in Integration Red Hat - Original Message - From: Itamar Heim ih...@redhat.com To: Yair Zaslavsky yzasl...@redhat.com Cc: users@ovirt.org Sent: Tuesday, October 1, 2013 3:21:36 PM Subject: Re: [Users] VMs and volumes disappearing On 10/01/2013 03:04 PM, Yair Zaslavsky wrote: I think I have an idea about what happended now. The 2 disappeared VMs have been imported into oVirt using virt-v2v. The 3rd one that's now missing a disk volume was not, but I have been playing with storage migration in the past. Then this is the reason, other users have complained about it at users@ovirt.org I have read the thread about disappearing VMs from August and indeed it sounds like this might me the same problem. Upgrade I just talked with Ofer (CC'ed), our release engineer, and he said that all packages should be 3.3.0-4 (notice ovirt-engine is not) I hope this helps you out, There are no updates, at least Yum doesn't give me any. I enabled the beta channel just now, but that doesn't make a difference. 3.3.0-1 is the latest version. What am I missing? martijn@ovirt:~ sudo yum list all|grep ovirt-engine.noarch ovirt-engine.noarch 3.3.0-1.el6@ovirt-beta I'll let ofer answer that. you should run ovirt-check-update and ovirt-engine-upgrade (or ovirt-engine-setup) to get updates for engine. we use version lock to prevent yum for updating the rpm without proper sync of db/backup/rollback. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] How can I modify the vm template?
I want to modify the vm template and I can start the vm from the modified template.So,can I realize it？___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] How can I modify the vm template?
On Oct 1, 2013, at 15:52 , hackxay hack...@163.com wrote: I want to modify the vm template and I can start the vm from the modified template.So,can I realize it？ you should be able to change most of the things. The same way as you would for a VM Thanks, michal ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] iptables settings/scripts ovirt 3.3
Are you referring to /etc/sysconfig/iptables ? That's where the engine setup configures iptables, when I provision my nodes I select Don't configure firewall and let puppet manage my iptables rules for other reasons.. not sure if that was what you're asking On Tue, Oct 1, 2013 at 11:16 PM, Sven Kieske s.kie...@mittwald.de wrote: Hi, we have an test environment with ovirt 3.3 installed on various hardware nodes. The management node is installed on an centos 6.4 x64 minimal. The issue we are running into is, that some ovirt component keeps resetting the iptables firewall configuration, denying access to ports 80 and 443, which results in the web interface being not accessible. We do know that the engine-setup initially configures the firewall, but through which scripts does iptables get configured? Are there some database entries for this? If you need any logfiles for this, please let me know. Currently we have disabled iptables, as it's just an test environment. We read about some vdsm bootstrap script (e.g. BZ 893680), may this be related? However we didn't find out where this scripts resides. Also vvyaz...@redhat.com posted in this BZ: not a bug. I don't see why you shouldn't be able to ping the hypervisor in the management lan? this is useful for monitoring and network debugging. ICMP is no danger at all. Kind regards Sven Kieske ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] VMs and volumes disappearing
Dne 1.10.2013 14:34, Martijn Grendelman napsal(a): Hi, I just had the same problem again. - Stopped oVirt engine - Checked the 'async_tasks' table. It was empty! - Started oVirt engine - Same set of imported VMs as last time deleted! I thought that lingering records from the 'async_tasks' table were to blame, but apparently, that's not the case. Can you tell me what I need to check/do/modify/update/delete before restarting oVirt that will keep my VMs from being deleted? (Please see below for a note on upgrading like you suggested) make sure you dont have records at async_tasks with vdsm_task_id of empty guid - but i'm really not in favor of such hacks, this is a hack. I strongly suggest you solve upgrade issue (please communicate with ofer on this). OK, I understand that, but for the record: 'async_tasks' was completely empty before I started Engine, so this hack wouldn't have been of any use. Cheers, MaMartijn rtijn. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users Hi MaMartijn, will your VMs disappear when you restart postgresql database or not? Thank you. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] How can I modify the vm template?
Dn(a 01.10.2013 15:52, hackxay wrote / napísal(a): I want to modify the vm template and I can start the vm from the modified template.So,can I realize it? I do not recommend this, but: I ensure, that the template is not being used (engine off ;) enable the lv on one of the hypervisors and access the templates disk directly. Then umount, disable the lv. -- Ernest Beinrohr, AXON PRO DevOps, Ing http://www.beinrohr.sk/ing.php, RHCE http://www.beinrohr.sk/rhce.php, RHCVA http://www.beinrohr.sk/rhce.php, LPIC http://www.beinrohr.sk/lpic.php, +421-2--6241-0360 callto://+421-2--6241-0360, +421-903--482-603 callto://+421-903--482-603 icq:28153343, skype:oernii-work callto://oernii-work, jabber:oer...@jabber.org For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard Feynman ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] Resizing disks destroys contents
Hi, I just tried out another feature of oVirt and again, I am shocked by the results. I did the following: - create new VM based on an earlier created template, with 20 GB disk - Run the VM - boots fine - Shut down the VM - Via Disks - Edit - Extend size by(GB) add 20 GB to the disk - Run the VM Result: no bootable device. Linux installation gone. Just to be sure, I booted the VM with a gparted live iso, and gparted reports the entire 40 GB as unallocated space. Where's my data? What's wrong with my oVirt installation? What am I doing wrong? Regards, Martijn. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] ovirt-node post-reboot no persistent networks config .. !!! urgent update req for POC coming weekend
Hi, we encountered the same problem as Anil. We wanted to give this nightly iso a try: http://jenkins.ovirt.org/job/node-devel/825/distro=centos64/artifact/ovirt-node-iso-3.1.0-0.999.825.el6.iso but it seems it doesn't contain the required vdsm-plugin? So any help on this topic would be appreciated. Greetings Sven On 30/09/13 20:52, Fabian Deutsch wrote: Hey Anil, you were doing the right thing to persist the network cfg files. It might have been node that was to greedy when reconfiguring DNS :) You might take a look at this fix: http://gerrit.ovirt.org/19705 It is untested but at least I could reproduce the behavior you were seeing and prepared the patch based on that findings. An ISO containing that fix will sooner or later land here: http://jenkins.ovirt.org/job/node-devel/ (The queue is currently quite long, which can take a day until the patch above is turned into an ISO). Long story short, please check if this patch fixes your problem, I'll also try to take a look at it when an iso is ready. And file a bug if you want to track the state of this issue. Greetings fabian ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] How can I modify the vm template?
thank you! I want to change something about template, for example, the proagrams in the templates, and then, the vms has created from the template will have synchronous change. 2013-10-01 hackxay___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] How can I modify the vm template?
Dňa 01.10.2013 17:07, hackxay wrote / napísal(a): thank you! I want to change something about template, for example, the proagrams in the templates, and then, the vms has created from the template will have synchronous change. No, the template change will only affect new systems from the template. -- Ernest Beinrohr, AXON PRO DevOps, Ing http://www.beinrohr.sk/ing.php, RHCE http://www.beinrohr.sk/rhce.php, RHCVA http://www.beinrohr.sk/rhce.php, LPIC http://www.beinrohr.sk/lpic.php, +421-2--6241-0360 callto://+421-2--6241-0360, +421-903--482-603 callto://+421-903--482-603 icq:28153343, skype:oernii-work callto://oernii-work, jabber:oer...@jabber.org “For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.” Richard Feynman ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] iptables settings/scripts ovirt 3.3
Yeah, we added our own rules with system-config-firewall-tui but somehow ovirt-engine seems to override these custom set values after some time, we couldn't find out until now what keeps changing the iptables, there seems to be some kind of automatic script called vdsm bootstrap script which does configure the firewall, but we are not sure this is the reason why the iptables entries for ports 80 and 443 keep vanishing. So I'm asking for information what components of ovirt are capable of changing iptables and in which way do these components do this? Are these components started automatically in any way? I couldn't find anything in the docs related to this, even not in the RedHat docs regarding RHEV. Kind Regards Sven On 01/10/13 16:36, Andrew Lau wrote: Are you referring to /etc/sysconfig/iptables ? That's where the engine setup configures iptables, when I provision my nodes I select Don't configure firewall and let puppet manage my iptables rules for other reasons.. not sure if that was what you're asking ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] How can I modify the vm template?
Does KVM not support it? 2013-10-01 hackxay___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] How can I modify the vm template?
Thank you! :) 2013-10-01 hackxay___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] How can I modify the vm template?
I have a win7 vm created from a win7 template. You know, microsoft has a lot of bugs and I need to fix them through their patches. So I want to use this method to save manpower. Also, I manage a lot of vms and some of them want to batch to install a new software(office,player etc.).So I want to change the template. 2013-10-01 hackxay___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Upgrade from 3.1
We have a NFS storage cluster (Isilon) for the domain. The main question: is there a way to bring in an existing storage domain to a new engine without exporting it then importing it? This would be good for not just upgrades but also disaster recovery as well. On Tue, Oct 1, 2013 at 8:24 AM, Itamar Heim ih...@redhat.com wrote: On 09/30/2013 04:55 PM, Christian Kolquist wrote: So, after many frustrating weekends of trying to upgrade ovirt from 3.1, I have come to the conclustion that it would just be best to export all of our VM's and Import them once I have redone the entire installation with FC19 and ovirt 3.3. Is there a way to export the entire domain easily? Or to bring the entire domain into a new install of the engine? Exporting a single VM takes a very long while. It would take a couple of days to export all of our VM's (33 total vm's using 1.017 TB of data) and then reimport them using the normal means of exporting the machines off then on to the export domain, load the new engine server then import them all back in. Any tips or tricks would be welcome. do you have a single data domain in the DC? is it nfs or something else? Christian FYI, I ran into just about every single bug that people had when upgrading from 3.1 to 3.2 and a few more. I can't spend any more time troubleshooting the upgrade process. If we can't do the export-import easily or migrate the current storage domain we will probably have to get rid of ovirt and move to another solution. --**--**--- This email, along with any attachments, is confidential. If you believe you received this message in error, please contact the sender immediately and delete all copies of the message. Thank you. __**_ Users mailing list Users@ovirt.org http://lists.ovirt.org/**mailman/listinfo/usershttp://lists.ovirt.org/mailman/listinfo/users -- --- This email, along with any attachments, is confidential. If you believe you received this message in error, please contact the sender immediately and delete all copies of the message. Thank you. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] How can I modify the vm template?
On Tue, 2013-10-01 at 23:14 +0800, hackxay wrote: Does KVM not support it? I'm not sure if KVM does support this, but I would say that this feature can be very dangerous as you might not know what's the status of your vm (e.g. someone installed new tools and you update a library in the template and therefor also in the vm which could make some of these tools unusable...). If you want to change/update applications either a configuration/software management solution like puppet, spacewalk,... or an application streaming solution would be the better and safer choice. Regards, René 2013-10-01 __ hackxay ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Upgrade from 3.1
On 10/01/2013 06:39 PM, Christian Kolquist wrote: We have a NFS storage cluster (Isilon) for the domain. The main question: is there a way to bring in an existing storage domain to a new engine without exporting it then importing it? This would be good for not just upgrades but also disaster recovery as well. yes, importing an existing data domain is a high priority for us for next version as the issue was raised several times by community users. for 3.3, there a few options (the first one is the cleanest) 1. save the export part - stop using the domain in 3.1 - change its meta data to that of an export domain - import it as an existing export domain to 3.3 - import the VMs 2. re-create the VMs / import disks - stop using the domain in 3.1 - create a new (empty) domain in 3.3 - move all disks to the new domain (assuming you create the new nfs export in a way allowing you to move, not copy, from the old export) - use the register disk api to add all disks - create VMs and associate the disks to them yes, this one requires to document first which disk is for which VM. i think someone scripted something around this option. if your disks have snapshots, this may become too complex. 3. re-create the VMs and override their disks. this was suggested several times in the past, but if you have snapshots, not relevant. On Tue, Oct 1, 2013 at 8:24 AM, Itamar Heim ih...@redhat.com mailto:ih...@redhat.com wrote: On 09/30/2013 04:55 PM, Christian Kolquist wrote: So, after many frustrating weekends of trying to upgrade ovirt from 3.1, I have come to the conclustion that it would just be best to export all of our VM's and Import them once I have redone the entire installation with FC19 and ovirt 3.3. Is there a way to export the entire domain easily? Or to bring the entire domain into a new install of the engine? Exporting a single VM takes a very long while. It would take a couple of days to export all of our VM's (33 total vm's using 1.017 TB of data) and then reimport them using the normal means of exporting the machines off then on to the export domain, load the new engine server then import them all back in. Any tips or tricks would be welcome. do you have a single data domain in the DC? is it nfs or something else? Christian FYI, I ran into just about every single bug that people had when upgrading from 3.1 to 3.2 and a few more. I can't spend any more time troubleshooting the upgrade process. If we can't do the export-import easily or migrate the current storage domain we will probably have to get rid of ovirt and move to another solution. --__--__--- This email, along with any attachments, is confidential. If you believe you received this message in error, please contact the sender immediately and delete all copies of the message. Thank you. _ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/__mailman/listinfo/users http://lists.ovirt.org/mailman/listinfo/users --- This email, along with any attachments, is confidential. If you believe you received this message in error, please contact the sender immediately and delete all copies of the message. Thank you. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] iptables settings/scripts ovirt 3.3
On Tue, 1 Oct 2013, Sven Kieske wrote: We read about some vdsm bootstrap script (e.g. BZ 893680), may this be related? SvenKieske appeared in the OFTC IRC channel #ovirt with this issue, and we discussed it some more 11:41 SvenKieske meaning you can't ping compute nodes, this is in the default install 11:41 orc_orc SvenKieske: * nod * that effect would occur with the physdev rule, I think 11:41 SvenKieske and I think this default iptables rule is just plain useless :) 11:42 SvenKieske and prevents proper network debugging, as we are having some issues with network related to newest ovirt nodes 11:42 orc_orc SvenKieske: assumedly you are following a guide. can you point out that URL and the step at which the problem is first noticed and he pointed to the wiki outline at: http://www.ovirt.org/Quick_Start_Guide#Install_oVirt_Node 11:43 orc_orc but from a policy POV, it may make sense that a node is not reachible until it has had time to become hardened .. and I also pointed out an example of an ICMP fragmantation attack and its remdiation in the Red Hat bugzilla I don't see why you shouldn't be able to ping the hypervisor in the management lan? this is useful for monitoring and network debugging. ICMP is no danger at all. and in IRC he there stated 11:45 SvenKieske I'm not sure you can harden this node any further, as it resides on a read only file system, beside that, I can not think of any attack vector via icmp on the compute node 11:46 orc_orc SvenKieske: there are some ICMP attacks, particularly on ipv6 stacks, which can cause machines to fall over and die 11:46 orc_orc I reported one a while back 11:47 orc_orc the packet reassembly code had an unsuspected re-construction method with a problem in it and at that point he concluded that perhaps the ICMP block limitation had policy reasons behind it 11:49 SvenKieske Well then that's fine with me, but maybe the node devs should more focus on reliable network configuration and then harden it for security and not the other way around, it was just a small nuisance, if network setup in 3.3 would work ootb I'd maybe never noticed ping doesn't work ootb to which I can only respond: 11:49 orc_orc SvenKieske: sounds like you are saying that you need to file an RFE as to debugging tools extensions or amend the setup documentation I had a private inquiry about KVM hardening and so had been looking at the physdev iptables rules recently, and on a VM for which I am responsible an incident just last weekend 11:50 orc_orc SvenKieske: I had a person at my office just today, who was the victim of a TOR attack on a VM 11:50 orc_orc so VM's _do_ get scanned for and attacked ... in part we mitigated the attack via a temporary iptables rule on the KVM based hypervisor ... and he closed that he may file something tomorrow. 11:50 SvenKieske yeah, might be the way to go, but my workday is over now, so maybe tomorrow :) 11:50 orc_orc SvenKieske * nod * don't forget ;) 11:51 SvenKieske I'm all in for more computer security :) 11:51 SvenKieske see you! 11:51 * orc_orc waves I've been working through the setup documentation as well since the 3.3 update, and have a list of questions as to the wiki materials, as of course bit rot happens in wiki's (heck, in _any_ documentation) as new releases are issued -- Russ herrold Kind regards Sven Kieske ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- -- end == .-- -... ---.. ... -.- -.-- Copyright (C) 2013 R P Herrold herr...@owlriver.com My words are not deathless prose, but they are mine. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Migration issues with ovirt 3.3
Dan, which are the path to those files that you're asking to me? Now the debian vm it's not working. After try the migration of the Windows vm, the live migration it's not working in the debian. Do you think that this issue it's related to the hosts or with the manager? i really would like to get this working and to other user this is working fine. Do you think if that i make a whole new install maybe this start to work? I'm going to test what Michal say right now with the same host, but i think that's going to happen the same thing. Regards! 2013/9/30 Michal Skrivanek mskri...@redhat.com On Sep 29, 2013, at 14:15 , Dan Kenigsberg dan...@redhat.com wrote: On Fri, Sep 27, 2013 at 03:36:22PM -0300, emi...@gmail.com wrote: So Dan, could I do some other test for you?, The live migration it's only working with a Debian install, I've just finished to install a windows server 2K8 and it doesn't work neither, gives the following error VM W2K8 is down. Exit message: 'iface'. Do you have any non-gluster setup to give it a try? We have this bug 1007980 which also seems to demonstrate in gluster-setup only….don't know why yet, but perhaps this can be related…. Thanks, michal Frankly, I am out of ideas of what could be causing this very important bug :-( It is unrelated to hotplugging, and probably not to migration - something bad happens when the VM parameters are persisted to disk, or loaded from it. I do not see how the type of the guest could matter. Could you tell if there is any other difference betrween your W2K8 VM and your Debian one? Could you post here the first vmCreate command of the two VMs, and their libvirt domxml? Regards, Dan. -- *Emiliano Tortorella* +598 98941176 emi...@gmail.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Resizing disks destroys contents
Martijn Grendelman wrote: Hi, I just tried out another feature of oVirt and again, I am shocked by the results. I did the following: - create new VM based on an earlier created template, with 20 GB disk - Run the VM - boots fine - Shut down the VM - Via Disks - Edit - Extend size by(GB) add 20 GB to the disk - Run the VM Result: no bootable device. Linux installation gone. Just to be sure, I booted the VM with a gparted live iso, and gparted reports the entire 40 GB as unallocated space. Where's my data? What's wrong with my oVirt installation? What am I doing wrong? Probably nothing wrong with your installation. Have a brand new 3.3.0-4.el6 (Centos-6.4 minimal) installation of ovirt-engine and 4 hosts and observed the same behaviour. I think there is a bugzilla open about it, else I'll create one tomorrow. Joop ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Resizing disks destroys contents
Hi Martijn, can you post somewhere the relevant vdsm logs (from the spm host)? Thanks, -- Federico - Original Message - From: Martijn Grendelman martijn.grendel...@isaac.nl To: users@ovirt.org Sent: Tuesday, October 1, 2013 5:01:39 PM Subject: [Users] Resizing disks destroys contents Hi, I just tried out another feature of oVirt and again, I am shocked by the results. I did the following: - create new VM based on an earlier created template, with 20 GB disk - Run the VM - boots fine - Shut down the VM - Via Disks - Edit - Extend size by(GB) add 20 GB to the disk - Run the VM Result: no bootable device. Linux installation gone. Just to be sure, I booted the VM with a gparted live iso, and gparted reports the entire 40 GB as unallocated space. Where's my data? What's wrong with my oVirt installation? What am I doing wrong? Regards, Martijn. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Could not add iscsi domain to data-center
Hi, Was just looking at it before you resolved it, so just out of curiousity... What was the problem? - Original Message - From: Saurabh saurabh.ku...@techblue.co.uk To: users@ovirt.org Sent: Tuesday, October 1, 2013 2:40:51 PM Subject: Re: [Users] Could not add iscsi domain to data-center On 30/09/13 14:37, Saurabh wrote: Hi all, I am using ovirt 3.3 on Centos6. Things were running fine untill I had nfs as the deata storage for my data center. Now I have created a new data center of type iscsi, but I am not able to add the iscsi storage to this Datacenter. This is all what i did. 1I created a new datacenter of type iscsi 2configured a cluster to this datacenter 3moved my host to this cluster. 4Now navigated to the storage tab 5Clicked on new domain 6selected data/iscsi 7discovered the iscsi iqn but when I login to that iqn the login is not successful. I am attaching you a screenshot. Thanks. saurabh. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users resolved the problem!! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Migration issues with ovirt 3.3
On Tue, Oct 01, 2013 at 02:35:34PM -0300, emi...@gmail.com wrote: Dan, which are the path to those files that you're asking to me? Now the debian vm it's not working. After try the migration of the Windows vm, the live migration it's not working in the debian. The fact that now both VMs behave the same makes comparing them fruitless. Still it may be intersting to see your vdsm.log (from source and destination) since the first time a faulty VM was started until the 'iface' exception. Do you think that this issue it's related to the hosts or with the manager? It smells very much Vdsm-specific, but I'm only guessing. i really would like to get this working and to other user this is working fine. Do you think if that i make a whole new install maybe this start to work? I do not suppose this would help, but I'm not in the position to exclude exploration routes. I'm going to test what Michal say right now with the same host, but i think that's going to happen the same thing. Regards! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [Users] Upgrade from 3.1
I am planning on testing the modify existing to become an export domain. That will only require me to copy within the isilon cluster a copy of the data which only will take about 1 hour. The plan is to do the following: 1. Load Fedora 19 on new engine server and install the engine, add new storage domain shares and get fully up and running without adding any nodes 2. shutdown all VM's and then remove the nodes 3. shutdown engine on current server 4. copy the existing storage domain to another location on the NAS and share it out over NFS. 5. Add nodes to new engine 6. Modify the copy of the storage domain to be an export domain ( http://humblec.com/convert-master-data-domain-to-export-domain-in-a-crashed-rhevmovirt-setup/ ) 7. Add it in as an existing export domain on the new engine server and start import of VM's (will take probably 4-6 hours or maybe longer, total storage is ~1TB of data) Are there any further suggestions to this? If this plan fails then I will be able to revert back to the original engine server and domain. Christian On Tue, Oct 1, 2013 at 10:48 AM, Itamar Heim ih...@redhat.com wrote: On 10/01/2013 06:39 PM, Christian Kolquist wrote: We have a NFS storage cluster (Isilon) for the domain. The main question: is there a way to bring in an existing storage domain to a new engine without exporting it then importing it? This would be good for not just upgrades but also disaster recovery as well. yes, importing an existing data domain is a high priority for us for next version as the issue was raised several times by community users. for 3.3, there a few options (the first one is the cleanest) 1. save the export part - stop using the domain in 3.1 - change its meta data to that of an export domain - import it as an existing export domain to 3.3 - import the VMs 2. re-create the VMs / import disks - stop using the domain in 3.1 - create a new (empty) domain in 3.3 - move all disks to the new domain (assuming you create the new nfs export in a way allowing you to move, not copy, from the old export) - use the register disk api to add all disks - create VMs and associate the disks to them yes, this one requires to document first which disk is for which VM. i think someone scripted something around this option. if your disks have snapshots, this may become too complex. 3. re-create the VMs and override their disks. this was suggested several times in the past, but if you have snapshots, not relevant. On Tue, Oct 1, 2013 at 8:24 AM, Itamar Heim ih...@redhat.com mailto:ih...@redhat.com wrote: On 09/30/2013 04:55 PM, Christian Kolquist wrote: So, after many frustrating weekends of trying to upgrade ovirt from 3.1, I have come to the conclustion that it would just be best to export all of our VM's and Import them once I have redone the entire installation with FC19 and ovirt 3.3. Is there a way to export the entire domain easily? Or to bring the entire domain into a new install of the engine? Exporting a single VM takes a very long while. It would take a couple of days to export all of our VM's (33 total vm's using 1.017 TB of data) and then reimport them using the normal means of exporting the machines off then on to the export domain, load the new engine server then import them all back in. Any tips or tricks would be welcome. do you have a single data domain in the DC? is it nfs or something else? Christian FYI, I ran into just about every single bug that people had when upgrading from 3.1 to 3.2 and a few more. I can't spend any more time troubleshooting the upgrade process. If we can't do the export-import easily or migrate the current storage domain we will probably have to get rid of ovirt and move to another solution. --**__** --__--- This email, along with any attachments, is confidential. If you believe you received this message in error, please contact the sender immediately and delete all copies of the message. Thank you. __**___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/__**mailman/listinfo/usershttp://lists.ovirt.org/__mailman/listinfo/users http://lists.ovirt.org/**mailman/listinfo/usershttp://lists.ovirt.org/mailman/listinfo/users --**--**--- This email, along with any attachments, is confidential. If you believe you received this message in error, please contact the sender immediately and delete all copies of the message. Thank you.
Re: [Users] Migration issues with ovirt 3.3
I'm having this issue on my ovirt 3.3 setup (two node, one is AIO, GlusterFS storage, both on F19) as well. Jason On Tue, 2013-10-01 at 21:54 +0100, Dan Kenigsberg wrote: On Tue, Oct 01, 2013 at 02:35:34PM -0300, emi...@gmail.com wrote: Dan, which are the path to those files that you're asking to me? Now the debian vm it's not working. After try the migration of the Windows vm, the live migration it's not working in the debian. The fact that now both VMs behave the same makes comparing them fruitless. Still it may be intersting to see your vdsm.log (from source and destination) since the first time a faulty VM was started until the 'iface' exception. Do you think that this issue it's related to the hosts or with the manager? It smells very much Vdsm-specific, but I'm only guessing. i really would like to get this working and to other user this is working fine. Do you think if that i make a whole new install maybe this start to work? I do not suppose this would help, but I'm not in the position to exclude exploration routes. I'm going to test what Michal say right now with the same host, but i think that's going to happen the same thing. Regards! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[Users] About the Backup-Restore API Integration
Hi, I'm testing ovirt to replace ESXi. Right now I want know if there is something like guettoVCB.sh (https://communities.vmware.com/docs/DOC-8760) that i can use with oVirt. I'm checking the following link: http://www.ovirt.org/Features/Backup-Restore_API_Integration but i don't understand if this feature it's aviable right now and if it allow me to do something like what guettoVCB.sh do. Regards! Emiliano ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
