[ovirt-users] [QE][ACTION REQUIRED] oVirt 3.5.1 RC status
Hi, according to the new oVirt 3.5.1 schedule, we're going to start composing oVirt 3.5.1 RC on *2015-01-07 08:00 UTC* from 3.5 branch. The new GA release date is now targeted to 2015-01-14. VDSM team decided to release a new vdsm package as async release for 3.5.0. Due to issues with Fedora Koji Build System packages are not yet ready to be released. ACTION: VDSM team to follow up when the packages will be ready to be released. The bug tracker [1] shows 1 open blocker: Bug ID Whiteboard Status Summary 1160846 sla NEW Can't add disk to VM without specifying disk profile when the storage domain has more than one disk profile In order to stabilize the release a new branch ovirt-engine-3.5.1 will be created from the same git hash used for composing the RC. - ACTION: assignee please provide ETA on above blocker Maintainers: - Please be sure that 3.5 snapshot allow to create VMs - Please be sure that no pending patches are going to block the release - If any patch must block the RC release please raise the issue as soon as possible. There are still 62 bugs [2] targeted to 3.5.1. Excluding node and documentation bugs we still have 41 bugs [3] targeted to 3.5.1. Maintainers / Assignee: - Please add the bugs to the tracker if you think that 3.5.1 should not be released without them fixed. - ACTION: Please update the target to 3.5.2 or later for bugs that won't be in 3.5.1: it will ease gathering the blocking bugs for next releases. - ACTION: Please fill release notes, the page has been created here [4] Community: - If you're testing oVirt 3.5 nightly snapshot, please add yourself to the test page [5] [1] http://bugzilla.redhat.com/1155170 [2] http://goo.gl/7G0PDV [3] http://goo.gl/6gUbVr [4] http://www.ovirt.org/OVirt_3.5.1_Release_Notes [5] http://www.ovirt.org/Testing/oVirt_3.5.1_Testing Thanks, -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] [QE][ACTION REQUIRED] oVirt 3.6.0 status
Hi, Release management for 3.6.0 [1] has been updated following the new release process[2]. ACTION: Feature proposed for 3.6.0 must now be collected in the 3.6 Google doc [3] and reviewed by maintainers. Finished the review process, the remaining key milestones for this release will be scheduled. For reference, external project schedules we're tracking are: Fedora 21: 2014-12-09 (RELEASED) Fedora 22: no earlier than 2015-05-19 Foreman 1.8.0: 2015-03-01 GlusterFS 3.7: 2015-04-29 OpenStack Kilo: 2015-04-30 QEMU 2.1.3: 2014-12-29 QEMU 2.2.0: 2014-12-09 (RELEASED) The tracker bug for 3.6.0 [4] currently shows no blockers. There are 461 bugs [5] targeted to 3.6.0. Excluding node and documentation bugs we have 438 bugs [6] targeted to 3.6.0. [1] http://www.ovirt.org/OVirt_3.6_Release_Management [2] http://www.ovirt.org/Release_process [3] http://goo.gl/9X3G49 [4] https://bugzilla.redhat.com/show_bug.cgi?id=1155425 [5] http://goo.gl/zwkF3r [6] http://goo.gl/ZbUiMc -- Sandro Bonazzola Better technology. Faster innovation. Powered by community collaboration. See how it works at redhat.com ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template
Would this be limits for the vdsm process? Then what is the proper way to change ulimits for VDSM? On 16 December 2014 at 20:45, Donny Davis do...@cloudspin.me wrote: The only thing I can think of would be file hard and soft limits, but I am no oVirt pro. 'no free file handlers in pool' that would make sense to me… Donny *From:* Tiemen Ruiten [mailto:t.rui...@rdmedia.com] *Sent:* Tuesday, December 16, 2014 12:40 PM *To:* Donny Davis *Cc:* Users@ovirt.org *Subject:* Re: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template About 25-30. The nodes are Xeon(R) CPU E5-2650 0 @ 2.00GHz with 16 hyperthreaded cores and 64 GB of RAM each. At the moment I created the VM, processor load on both nodes was less than 1. On 16 December 2014 at 20:29, Donny Davis do...@cloudspin.me wrote: What is the VM load you are running on your servers? -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Tiemen Ruiten Sent: Tuesday, December 16, 2014 12:27 PM To: users@ovirt.org Subject: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template Hello, I ran into a nasty problem today when creating a new, cloned VM from a template (one virtual 20 GBdisk) on our two-node oVirt cluster: on the node where I started a VM creation job, load skyrocketed and some VMs stopped responding until and after the job failed. Everything recovered without intervention, but this obviously shouldn't happen. I have attached the relevant vdsm log file. The button to create the VM was pressed around 11:17, the first error in the vdsm log is at 11:23:58. The ISO domain is a gluster volume exposed via NFS, the storage domain for the VM's is also a gluster volume. The underlying filesystem is ZFS. The hypervisor nodes are full CentOS 6 installs. I'm guessing the 'no free file handlers in pool' in the vdsm log file is key here. What can I do to prevent this from happening again? Apart from not creating new VMs of course :) Tiemen -- Tiemen Ruiten Systems Engineer RD Media -- Tiemen Ruiten Systems Engineer RD Media ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] 1. FQDN for vm creating with hosted-engine (Yue, Cong)
FQDN or fully qualified domain name means that you have to reserve in your DNS a name corresponding to IP received by HE VM from DHCP. IP address should be reserved for the VM at DHCP. I advise not to use manual IP to FQDN at your host, as this will lead to many confusions, especially when you'll have more than a single host machine, but you always can configure at your /etc/hosts file the FQDN corresponding to IP address given to HE VM. Thanks in advance. Best regards, Nikolai Nikolai Sednev Senior Quality Engineer at Compute team Red Hat Israel 34 Jerusalem Road, Ra'anana, Israel 43501 Tel: +972 9 7692043 Mobile: +972 52 7342734 Email: nsed...@redhat.com IRC: nsednev - Original Message - From: users-requ...@ovirt.org To: users@ovirt.org Sent: Wednesday, December 17, 2014 1:19:12 AM Subject: Users Digest, Vol 39, Issue 104 Send Users mailing list submissions to users@ovirt.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.ovirt.org/mailman/listinfo/users or, via email, send a message with subject or body 'help' to users-requ...@ovirt.org You can reach the person managing the list at users-ow...@ovirt.org When replying, please edit your Subject line so it is more specific than Re: Contents of Users digest... Today's Topics: 1. FQDN for vm creating with hosted-engine (Yue, Cong) 2. Server 2012 R2 + Intel Conroe Cluster (Nathan Llaneza) 3. alternate method of fencing (Brent Hartzell) 4. Re: Don't start vm (Roman Nikolayevich Drovalev) -- Message: 1 Date: Tue, 16 Dec 2014 14:44:44 -0800 From: Yue, Cong cong_...@alliedtelesis.com To: users@ovirt.org users@ovirt.org Subject: [ovirt-users] FQDN for vm creating with hosted-engine Message-ID: ed08b56256b38842a463a2a0804c5ac0326aca3...@svr-ca-exch1.atg.lc Content-Type: text/plain; charset=us-ascii Hi Now I am trying to confirm KVM's HA with ovirt, and doing the walk through as the following guide. http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/ During the VM setting, FQDN is asked, what FQDN means about? Does it mean the hostname of VM host? In my case, it is compute2-2. The following is my hosts file, my VM host and storage is 10.0.0.92. And I am trying to assign 10.0.0.95 to the hosted VM. --- [root@compute2-2 ~]# cat /etc/hosts 10.0.0.93 compute2-2 nfs2-2 10.0.0.95 ovrit-test 127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4 ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 Also how I can remove the VM I installed, as for when I try to do hosted-engine --deploy, it shows --- [root@compute2-2 ~]# hosted-engine --deploy [ INFO ] Stage: Initializing Continuing will configure this host for serving as hypervisor and create a VM where you have to install oVirt Engine afterwards. Are you sure you want to continue? (Yes, No)[Yes]: Yes [ INFO ] Generating a temporary VNC password. [ INFO ] Stage: Environment setup Configuration files: [] Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20141216144036-30j0wk.log Version: otopi-1.3.0 (otopi-1.3.0-1.el7) [ INFO ] Hardware supports virtualization [ INFO ] Bridge ovirtmgmt already created [ INFO ] Stage: Environment packages setup [ INFO ] Stage: Programs detection [ INFO ] Stage: Environment setup [ ERROR ] The following VMs has been found: ac4c8d35-ca47-4394-afa8-1180c768128c [ ERROR ] Failed to execute stage 'Environment setup': Cannot setup Hosted Engine with other VMs running [ INFO ] Stage: Clean up [ INFO ] Generating answer file '/etc/ovirt-hosted-engine/answers.conf' [ INFO ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has been updated [ INFO ] Stage: Pre-termination [ INFO ] Stage: Termination -- Thanks, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. -- next part -- An HTML attachment was scrubbed... URL: http://lists.ovirt.org/pipermail/users/attachments/20141216/34bdb2c2/attachment-0001.html -- Message: 2 Date: Tue, 16 Dec 2014 18:16:03 -0500 From: Nathan Llaneza ntllaneza...@gmail.com To: users users@ovirt.org Subject: [ovirt-users] Server 2012 R2 + Intel Conroe Cluster Message-ID: camkyohuba_qverho+ykym5xte8jybemuftbk4gwzs1wyzpb...@mail.gmail.com Content-Type: text/plain; charset=utf-8
Re: [ovirt-users] VM disk tab doesn't show storage name after 3.5 upgrade
Dňa 16.12.2014 o 14:28 Nir Soffer napísal(a): - Original Message - Just to let you know, there had been some changes in the disks tab and this works: the default display was changed to show all disks instead of images thus omitting the info specific to image disks, you can easily switch between the views by clicking on the Images radio button instead of the All and see all storage data for image disks. (from BZ https://bugzilla.redhat.com/show_bug.cgi?id=1174788) -- Ernest Beinrohr, AXON PRO Ing http://www.beinrohr.sk/ing.php, RHCE http://www.beinrohr.sk/rhce.php, RHCVA http://www.beinrohr.sk/rhce.php, LPIC http://www.beinrohr.sk/lpic.php, VCA http://www.beinrohr.sk/vca.php, +421-2-62410360 +421-903-482603 ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] alternate method of fencing
- Original Message - From: Brent Hartzell brent.hartz...@outlook.com To: users@ovirt.org Sent: Friday, December 12, 2014 6:14:40 PM Subject: [ovirt-users] alternate method of fencing Is there a way to force oVirt to place a host into maintenance mode automatically when a problem occurs? The problem we have is separate networks for everything: 2 public nics which are bonded active/backup for internet access 4 bonded gigabit nics for our Gluster network 1 IPMI The ipmi is on a completely different network, not attached to anything else other than a VPN. /// Our cluster servers shared Gluster hypervisor on the same hosts, which works great however, all are 1U servers so we don’t have room for another NIC to dedicate to just an ipmi network connection in addition to the ipmi card itself. Even if the PSU on a host fails, then the ipmi power management is useless anyhow and the VM’s on that host will not be moved. I’ve tested putting a host into maintenance mode with running VM’s and it will auto-migrate the VM’s without issue. Is there a way to make oVirt just force a host into maintenance mode if there’s some sort of problem or some other fencing mechanism that will allow the VM’s to be migrated to another host? I think this is a scheduling issue rather than fencing , please take a look at http://www.ovirt.org/Features/oVirtScheduler http://www.ovirt.org/Features/oVirtSchedulerAPI http://www.ovirt.org/Features/oVirt_External_Scheduling_Proxy ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template
Hi, You are right, the problem is with the file handlers. You can increase the number of handlers in pool using the vdsm config file, which is supposed to be under the following directory in your system: /usr/lib/python2.6/site-packages/vdsm/config.py The default value for 'process_pool_max_slots_per_domain' is 10, so you can increase it by a bit, but not too much. But I suspect the problem is in a larger scale, and this is only a temporary relief for your system and this needs much more attention and a proper fix. could you please open a bug on RHEV/vdsm in bugzilla stating all of the details of your setup and logs? thanks, Yeela - Original Message - From: Tiemen Ruiten t.rui...@rdmedia.com To: Users@ovirt.org users@ovirt.org Sent: Wednesday, December 17, 2014 10:53:39 AM Subject: Re: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template Would this be limits for the vdsm process? Then what is the proper way to change ulimits for VDSM? On 16 December 2014 at 20:45, Donny Davis do...@cloudspin.me wrote: The only thing I can think of would be file hard and soft limits, but I am no oVirt pro. 'no free file handlers in pool' that would make sense to me… Donny From: Tiemen Ruiten [mailto: t.rui...@rdmedia.com ] Sent: Tuesday, December 16, 2014 12:40 PM To: Donny Davis Cc: Users@ovirt.org Subject: Re: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template About 25-30. The nodes are Xeon(R) CPU E5-2650 0 @ 2.00GHz with 16 hyperthreaded cores and 64 GB of RAM each. At the moment I created the VM, processor load on both nodes was less than 1. On 16 December 2014 at 20:29, Donny Davis do...@cloudspin.me wrote: What is the VM load you are running on your servers? -Original Message- From: users-boun...@ovirt.org [mailto: users-boun...@ovirt.org ] On Behalf Of Tiemen Ruiten Sent: Tuesday, December 16, 2014 12:27 PM To: users@ovirt.org Subject: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template Hello, I ran into a nasty problem today when creating a new, cloned VM from a template (one virtual 20 GBdisk) on our two-node oVirt cluster: on the node where I started a VM creation job, load skyrocketed and some VMs stopped responding until and after the job failed. Everything recovered without intervention, but this obviously shouldn't happen. I have attached the relevant vdsm log file. The button to create the VM was pressed around 11:17, the first error in the vdsm log is at 11:23:58. The ISO domain is a gluster volume exposed via NFS, the storage domain for the VM's is also a gluster volume. The underlying filesystem is ZFS. The hypervisor nodes are full CentOS 6 installs. I'm guessing the 'no free file handlers in pool' in the vdsm log file is key here. What can I do to prevent this from happening again? Apart from not creating new VMs of course :) Tiemen -- Tiemen Ruiten Systems Engineer RD Media -- Tiemen Ruiten Systems Engineer RD Media ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template
Thank you, I will try to increase to 20 and see what happens. Bug is filed: https://bugzilla.redhat.com/show_bug.cgi?id=1175255 On 17 December 2014 at 11:48, Yeela Kaplan ykap...@redhat.com wrote: Hi, You are right, the problem is with the file handlers. You can increase the number of handlers in pool using the vdsm config file, which is supposed to be under the following directory in your system: /usr/lib/python2.6/site-packages/vdsm/config.py The default value for 'process_pool_max_slots_per_domain' is 10, so you can increase it by a bit, but not too much. But I suspect the problem is in a larger scale, and this is only a temporary relief for your system and this needs much more attention and a proper fix. could you please open a bug on RHEV/vdsm in bugzilla stating all of the details of your setup and logs? thanks, Yeela - Original Message - From: Tiemen Ruiten t.rui...@rdmedia.com To: Users@ovirt.org users@ovirt.org Sent: Wednesday, December 17, 2014 10:53:39 AM Subject: Re: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template Would this be limits for the vdsm process? Then what is the proper way to change ulimits for VDSM? On 16 December 2014 at 20:45, Donny Davis do...@cloudspin.me wrote: The only thing I can think of would be file hard and soft limits, but I am no oVirt pro. 'no free file handlers in pool' that would make sense to me… Donny From: Tiemen Ruiten [mailto: t.rui...@rdmedia.com ] Sent: Tuesday, December 16, 2014 12:40 PM To: Donny Davis Cc: Users@ovirt.org Subject: Re: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template About 25-30. The nodes are Xeon(R) CPU E5-2650 0 @ 2.00GHz with 16 hyperthreaded cores and 64 GB of RAM each. At the moment I created the VM, processor load on both nodes was less than 1. On 16 December 2014 at 20:29, Donny Davis do...@cloudspin.me wrote: What is the VM load you are running on your servers? -Original Message- From: users-boun...@ovirt.org [mailto: users-boun...@ovirt.org ] On Behalf Of Tiemen Ruiten Sent: Tuesday, December 16, 2014 12:27 PM To: users@ovirt.org Subject: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template Hello, I ran into a nasty problem today when creating a new, cloned VM from a template (one virtual 20 GBdisk) on our two-node oVirt cluster: on the node where I started a VM creation job, load skyrocketed and some VMs stopped responding until and after the job failed. Everything recovered without intervention, but this obviously shouldn't happen. I have attached the relevant vdsm log file. The button to create the VM was pressed around 11:17, the first error in the vdsm log is at 11:23:58. The ISO domain is a gluster volume exposed via NFS, the storage domain for the VM's is also a gluster volume. The underlying filesystem is ZFS. The hypervisor nodes are full CentOS 6 installs. I'm guessing the 'no free file handlers in pool' in the vdsm log file is key here. What can I do to prevent this from happening again? Apart from not creating new VMs of course :) Tiemen -- Tiemen Ruiten Systems Engineer RD Media -- Tiemen Ruiten Systems Engineer RD Media ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Tiemen Ruiten Systems Engineer RD Media ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template
- Original Message - From: Tiemen Ruiten t.rui...@rdmedia.com To: Yeela Kaplan ykap...@redhat.com Cc: Users@ovirt.org users@ovirt.org Sent: Wednesday, December 17, 2014 1:22:59 PM Subject: Re: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template Thank you, I will try to increase to 20 and see what happens. Bug is filed: https://bugzilla.redhat.com/show_bug.cgi?id=1175255 Thank you and I forgot to mention that you have to restart vdsmd so the change will apply... On 17 December 2014 at 11:48, Yeela Kaplan ykap...@redhat.com wrote: Hi, You are right, the problem is with the file handlers. You can increase the number of handlers in pool using the vdsm config file, which is supposed to be under the following directory in your system: /usr/lib/python2.6/site-packages/vdsm/config.py The default value for 'process_pool_max_slots_per_domain' is 10, so you can increase it by a bit, but not too much. But I suspect the problem is in a larger scale, and this is only a temporary relief for your system and this needs much more attention and a proper fix. could you please open a bug on RHEV/vdsm in bugzilla stating all of the details of your setup and logs? thanks, Yeela - Original Message - From: Tiemen Ruiten t.rui...@rdmedia.com To: Users@ovirt.org users@ovirt.org Sent: Wednesday, December 17, 2014 10:53:39 AM Subject: Re: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template Would this be limits for the vdsm process? Then what is the proper way to change ulimits for VDSM? On 16 December 2014 at 20:45, Donny Davis do...@cloudspin.me wrote: The only thing I can think of would be file hard and soft limits, but I am no oVirt pro. 'no free file handlers in pool' that would make sense to me… Donny From: Tiemen Ruiten [mailto: t.rui...@rdmedia.com ] Sent: Tuesday, December 16, 2014 12:40 PM To: Donny Davis Cc: Users@ovirt.org Subject: Re: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template About 25-30. The nodes are Xeon(R) CPU E5-2650 0 @ 2.00GHz with 16 hyperthreaded cores and 64 GB of RAM each. At the moment I created the VM, processor load on both nodes was less than 1. On 16 December 2014 at 20:29, Donny Davis do...@cloudspin.me wrote: What is the VM load you are running on your servers? -Original Message- From: users-boun...@ovirt.org [mailto: users-boun...@ovirt.org ] On Behalf Of Tiemen Ruiten Sent: Tuesday, December 16, 2014 12:27 PM To: users@ovirt.org Subject: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template Hello, I ran into a nasty problem today when creating a new, cloned VM from a template (one virtual 20 GBdisk) on our two-node oVirt cluster: on the node where I started a VM creation job, load skyrocketed and some VMs stopped responding until and after the job failed. Everything recovered without intervention, but this obviously shouldn't happen. I have attached the relevant vdsm log file. The button to create the VM was pressed around 11:17, the first error in the vdsm log is at 11:23:58. The ISO domain is a gluster volume exposed via NFS, the storage domain for the VM's is also a gluster volume. The underlying filesystem is ZFS. The hypervisor nodes are full CentOS 6 installs. I'm guessing the 'no free file handlers in pool' in the vdsm log file is key here. What can I do to prevent this from happening again? Apart from not creating new VMs of course :) Tiemen -- Tiemen Ruiten Systems Engineer RD Media -- Tiemen Ruiten Systems Engineer RD Media ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Tiemen Ruiten Systems Engineer RD Media ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template
Just another thought, from looking at the vdsm logs it looks like there are too many calls to getVolumeSize that are eating up all handlers and eventually a timeout occurs. Adam, do you have any idea about this? - Original Message - From: Yeela Kaplan ykap...@redhat.com To: Tiemen Ruiten t.rui...@rdmedia.com Cc: Users@ovirt.org users@ovirt.org Sent: Wednesday, December 17, 2014 1:30:52 PM Subject: Re: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template - Original Message - From: Tiemen Ruiten t.rui...@rdmedia.com To: Yeela Kaplan ykap...@redhat.com Cc: Users@ovirt.org users@ovirt.org Sent: Wednesday, December 17, 2014 1:22:59 PM Subject: Re: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template Thank you, I will try to increase to 20 and see what happens. Bug is filed: https://bugzilla.redhat.com/show_bug.cgi?id=1175255 Thank you and I forgot to mention that you have to restart vdsmd so the change will apply... On 17 December 2014 at 11:48, Yeela Kaplan ykap...@redhat.com wrote: Hi, You are right, the problem is with the file handlers. You can increase the number of handlers in pool using the vdsm config file, which is supposed to be under the following directory in your system: /usr/lib/python2.6/site-packages/vdsm/config.py The default value for 'process_pool_max_slots_per_domain' is 10, so you can increase it by a bit, but not too much. But I suspect the problem is in a larger scale, and this is only a temporary relief for your system and this needs much more attention and a proper fix. could you please open a bug on RHEV/vdsm in bugzilla stating all of the details of your setup and logs? thanks, Yeela - Original Message - From: Tiemen Ruiten t.rui...@rdmedia.com To: Users@ovirt.org users@ovirt.org Sent: Wednesday, December 17, 2014 10:53:39 AM Subject: Re: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template Would this be limits for the vdsm process? Then what is the proper way to change ulimits for VDSM? On 16 December 2014 at 20:45, Donny Davis do...@cloudspin.me wrote: The only thing I can think of would be file hard and soft limits, but I am no oVirt pro. 'no free file handlers in pool' that would make sense to me… Donny From: Tiemen Ruiten [mailto: t.rui...@rdmedia.com ] Sent: Tuesday, December 16, 2014 12:40 PM To: Donny Davis Cc: Users@ovirt.org Subject: Re: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template About 25-30. The nodes are Xeon(R) CPU E5-2650 0 @ 2.00GHz with 16 hyperthreaded cores and 64 GB of RAM each. At the moment I created the VM, processor load on both nodes was less than 1. On 16 December 2014 at 20:29, Donny Davis do...@cloudspin.me wrote: What is the VM load you are running on your servers? -Original Message- From: users-boun...@ovirt.org [mailto: users-boun...@ovirt.org ] On Behalf Of Tiemen Ruiten Sent: Tuesday, December 16, 2014 12:27 PM To: users@ovirt.org Subject: [ovirt-users] ERROR 'no free file handlers in pool' while creating VM from template Hello, I ran into a nasty problem today when creating a new, cloned VM from a template (one virtual 20 GBdisk) on our two-node oVirt cluster: on the node where I started a VM creation job, load skyrocketed and some VMs stopped responding until and after the job failed. Everything recovered without intervention, but this obviously shouldn't happen. I have attached the relevant vdsm log file. The button to create the VM was pressed around 11:17, the first error in the vdsm log is at 11:23:58. The ISO domain is a gluster volume exposed via NFS, the storage domain for the VM's is also a gluster volume. The underlying filesystem is ZFS. The hypervisor nodes are full CentOS 6 installs. I'm guessing the 'no free file handlers in pool' in the vdsm log file is key here. What can I do to prevent this from happening again? Apart from not creating new VMs of course :) Tiemen -- Tiemen Ruiten Systems Engineer RD Media -- Tiemen Ruiten Systems Engineer RD Media ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Tiemen Ruiten Systems Engineer RD Media ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [STORAGE] Adding posix compliant FS
Hi Julian, IIUC the you have a self-created lvm, to which you're trying to connect as posix using ovirt. If that's the case please try to manually change the device's permissions to 36:36 under /dev/your_VG. If that doesn't work try the actual device it's mapped to (which is what vdsm actually tries to mount). If that also doesn't work please send us the output of: ls -lh /dev/your_VG . Regards, Vered - Original Message - From: Julian De Marchi jul...@jdcomputers.com.au To: users@ovirt.org Sent: Wednesday, December 17, 2014 3:35:34 AM Subject: Re: [ovirt-users] [STORAGE] Adding posix compliant FS Think I found some more clues. Thread-21910::DEBUG::2014-12-17 11:26:07,277::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgs --config ' devices { preferred_names = [^/dev/mapper/] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } ' --noheadings --units b --nosuffix --separator '|' --ignoreskippedcluster -o uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name 3ba06bee-861e-4868-8e89-f29f785bab65 (cwd None) Thread-21910::DEBUG::2014-12-17 11:26:07,348::lvm::288::Storage.Misc.excCmd::(cmd) FAILED: err = ' Volume group 3ba06bee-861e-4868-8e89-f29f785bab65 not found\n Skipping volume group 3ba06bee-861e-4868-8e89-f29f785bab65\n'; rc = 5 Thread-21910::WARNING::2014-12-17 11:26:07,350::lvm::370::Storage.LVM::(_reloadvgs) lvm vgs failed: 5 [] [' Volume group 3ba06bee-861e-4868-8e89-f29f785bab65 not found', ' Skipping volume group 3ba06bee-861e-4868-8e89-f29f785bab65'] Thread-21910::DEBUG::2014-12-17 11:26:07,351::lvm::407::Storage.OperationMutex::(_reloadvgs) Operation 'lvm reload operation' released the operation mutex But I still don't understand what it's trying to do. Just to recap, I do see it create the dir and mount the device. But when it fails it umounts everything. I tried to manually create the DIR it is expecting, but ovirt seems to remove it and re-create it which then ends up with root:root. I can see this as when I add the storage I run watch ls -lh and can see it all occur. Any help would still be greatly appreciated! On 12/16/14 19:46, Julian De Marchi wrote: On 16/12/14 17:20, Aharon Canan wrote: Did you chown 36:36 the folder to get the right permissions for adding to ovirt? That's the thing. Ovirt actually creates that dir when I go and try to add the storage. It mounts the LVM device to that dir then fails. In the logs I posted at http://pastebin.com/fzN9ktAX you can see it is failing with a permission denied error. The command that is above the error is touch. I think it is trying to touch a file to ensure all is well and when that fails it gives the error. If I knew where in the code to prefix the touch command with sudo and add a line to the sudoers entry I can test this idea. [...] - Original Message - From: Julian De Marchi jul...@jdcomputers.com.au To: users@ovirt.org Sent: Tuesday, December 16, 2014 4:40:04 AM Subject: Re: [ovirt-users] [STORAGE] Adding posix compliant FS On 12/16/14 08:57, Julian De Marchi wrote: Heya-- I'm using ovirt 3.5 and trying to add a posix compliant FS to a node in my cluster. The storage I'm trying to add is contained within LVM. Below is a link to my log files on the node where I'm trying to attach the storage. http://pastebin.com/fzN9ktAX I've read the ovirt manual for adding posix compliant storage and believe I'm doing everything correct. Any help to get this storage added would be great thanks and if I forgot to include any info please ask. More info to add. I was doing an ls on the dir it does the mount in and saw the dir was owned by root:root with different perms to the ones mounted via NFS. [root@blade01 libvirt]# ls /rhev/data-center/mnt/ -lh total 20K drwxrwxrwx 4 root root 4.0K Dec 11 09:00 10.106.200.100:_VM__IMAGES drwxrwxrwx 3 root root 4.0K Oct 17 09:42 10.106.200.22:_opt_vmexport drwxrwxrwx 4 root root 4.0K Oct 17 09:39 10.106.200.22:_var_lib_libvirt_images drwxr-xr-x 3 root root 4.0K Dec 15 16:52 _dev_mapper_VolGroup-lv__images This could explain why the touch command fails. Still at a loss over the issue though. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] disk ordering
Hi Paul, Please explain what disk ordering you are referring to. Disk ordering displayed when and where exactly? Thanks, Vered - Original Message - From: Paul Jansen vla...@yahoo.com.au To: users users@ovirt.org Sent: Wednesday, December 17, 2014 3:12:50 AM Subject: [ovirt-users] disk ordering Hello. I've noticed issues with inconsistent disk ordering when doing installs from time to time (on VMs with two disks). I came across this post from Itamar from October 2013 where 'disk ordering' is mentioned as a roadmap item: [Users] oVirt Roadmap feature requests - Summary I haven't found anything more when doing searches. Has any work been done on this, or is there a workaround? This is a little annoying. I never run into this issue under Vmware's ESXi. [Users] oVirt Roadmap feature requests - Summary [Users] oVirt Roadmap feature requests - Summary Itamar Heim iheim at redhat.com Sun Oct 6 15:55:33 EDT 2013 Previous message: [Users] so, what do you want next in oVirt? View on lists.ovirt.org Preview by Yahoo ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] disk ordering
Hello Vered.This is when doing an EL6 install. Disk 1 - which also has the bootable flag turned on in ovirt - sometime does not show up as SDA inside the OS. The secondary disk shows as SDA and the first disk shows as SDB. This is with both disks as virtio -scsi disks.Unfortunately this behaviour is not consistent, it does happen every now and then though.. A colleague hit this issue again last night. From: Vered Volansky ve...@redhat.com To: Paul Jansen vla...@yahoo.com.au Cc: users users@ovirt.org Sent: Wednesday, 17 December 2014, 22:10 Subject: Re: [ovirt-users] disk ordering Hi Paul, Please explain what disk ordering you are referring to. Disk ordering displayed when and where exactly? Thanks, Vered - Original Message - From: Paul Jansen vla...@yahoo.com.au To: users users@ovirt.org Sent: Wednesday, December 17, 2014 3:12:50 AM Subject: [ovirt-users] disk ordering Hello. I've noticed issues with inconsistent disk ordering when doing installs from time to time (on VMs with two disks). I came across this post from Itamar from October 2013 where 'disk ordering' is mentioned as a roadmap item: [Users] oVirt Roadmap feature requests - Summary I haven't found anything more when doing searches. Has any work been done on this, or is there a workaround? This is a little annoying. I never run into this issue under Vmware's ESXi. [Users] oVirt Roadmap feature requests - Summary [Users] oVirt Roadmap feature requests - Summary Itamar Heim iheim at redhat.com Sun Oct 6 15:55:33 EDT 2013 Previous message: [Users] so, what do you want next in oVirt? View on lists.ovirt.org Preview by Yahoo ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] vdsm losing connection to libvirt
- Original Message - From: Dan Kenigsberg dan...@redhat.com To: users@ovirt.org, ybron...@redhat.com Sent: Tuesday, December 16, 2014 11:29:36 PM Subject: Re: [ovirt-users] vdsm losing connection to libvirt 20:56:38,754::libvirtconnection::135::root::(wrapper) connection to libvirt broken. ecode: 1 edom: 7 [...] 20:56:38,755::BindingXMLRPC::1142::vds::(wrapper) libvirt error Traceback (most recent call last): File /usr/share/vdsm/rpc/BindingXMLRPC.py, line 1135, in wrapper res = f(*args, **kwargs) File /usr/share/vdsm/rpc/BindingXMLRPC.py, line 463, in getCapabilities ret = api.getCapabilities() File /usr/share/vdsm/API.py, line 1245, in getCapabilities c = caps.get() File /usr/share/vdsm/caps.py, line 615, in get caps.update(netinfo.get()) File /usr/lib/python2.7/site-packages/vdsm/netinfo.py, line 812, in get nets = networks() File /usr/lib/python2.7/site-packages/vdsm/netinfo.py, line 119, in networks allNets = ((net, net.name()) for net in conn.listAllNetworks(0)) File /usr/lib/python2.7/site-packages/vdsm/libvirtconnection.py, line 129, in wrapper __connections.get(id(target)).pingLibvirt() File /usr/lib64/python2.7/site-packages/libvirt.py, line 3642, in getLibVersion if ret == -1: raise libvirtError ('virConnectGetLibVersion() failed', conn=self) libvirtError: internal error: client socket is closed Does anything suspecious show up on libvirtd.log? I heard a report about a libvirt segmentation fault on centos7 - could this be it, too? Does `ps -o stime `pgrep libvirtd`` match with reported libvirt internal error? Would you provide the precise version of libvirt and vdsm? Confirmed. I'm aware of these bugs in particular, which could be related to a fair amount of mysterious libvirtd crashes: https://bugzilla.redhat.com/show_bug.cgi?id=1162208 https://bugzilla.redhat.com/show_bug.cgi?id=1171124 https://bugzilla.redhat.com/show_bug.cgi?id=1141159 It seems *more frequent* when migrations are involved, but as last bug tells us, it may happen on other cases as well. -- Francesco Romani RedHat Engineering Virtualization R D Phone: 8261328 IRC: fromani ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] disk ordering
Paul, This does not suppose to happen, so we'll need much more data in order to pin-point the problem, I hope you'll be able to do this for us. We'll need the exact flow in both cases (bootable is sda or sbd). Is this a new VM with new installations? An old VM? Are all the VMs based on the same template? If not what are the differences? Is it always EL6? What version are you using? Please add anything else that differentiate the two flows, and what's the same. Shahar may have more questions for you about this before you get your answer. Thanks in advance, Shahar, for your help on this. Regards, Vered - Original Message - From: Paul Jansen vla...@yahoo.com.au To: Vered Volansky ve...@redhat.com Cc: users users@ovirt.org Sent: Wednesday, December 17, 2014 1:46:06 PM Subject: Re: [ovirt-users] disk ordering Hello Vered. This is when doing an EL6 install. Disk 1 - which also has the bootable flag turned on in ovirt - sometime does not show up as SDA inside the OS. The secondary disk shows as SDA and the first disk shows as SDB. This is with both disks as virtio -scsi disks. Unfortunately this behaviour is not consistent, it does happen every now and then though.. A colleague hit this issue again last night. From: Vered Volansky ve...@redhat.com To: Paul Jansen vla...@yahoo.com.au Cc: users users@ovirt.org Sent: Wednesday, 17 December 2014, 22:10 Subject: Re: [ovirt-users] disk ordering Hi Paul, Please explain what disk ordering you are referring to. Disk ordering displayed when and where exactly? Thanks, Vered - Original Message - From: Paul Jansen vla...@yahoo.com.au To: users users@ovirt.org Sent: Wednesday, December 17, 2014 3:12:50 AM Subject: [ovirt-users] disk ordering Hello. I've noticed issues with inconsistent disk ordering when doing installs from time to time (on VMs with two disks). I came across this post from Itamar from October 2013 where 'disk ordering' is mentioned as a roadmap item: [Users] oVirt Roadmap feature requests - Summary I haven't found anything more when doing searches. Has any work been done on this, or is there a workaround? This is a little annoying. I never run into this issue under Vmware's ESXi. [Users] oVirt Roadmap feature requests - Summary [Users] oVirt Roadmap feature requests - Summary Itamar Heim iheim at redhat.com Sun Oct 6 15:55:33 EDT 2013 Previous message: [Users] so, what do you want next in oVirt? View on lists.ovirt.org Preview by Yahoo ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] disk ordering
On 17.12.14 07:55, Vered Volansky wrote: Paul, This does not suppose to happen, so we'll need much more data in order to pin-point the problem, I hope you'll be able to do this for us. We'll need the exact flow in both cases (bootable is sda or sbd). Is this a new VM with new installations? An old VM? Are all the VMs based on the same template? If not what are the differences? Is it always EL6? What version are you using? Please add anything else that differentiate the two flows, and what's the same. Shahar may have more questions for you about this before you get your answer. Thanks in advance, Shahar, for your help on this. Just as much details as you can please, Or it is just random? Regards, Vered - Original Message - From: Paul Jansen vla...@yahoo.com.au To: Vered Volansky ve...@redhat.com Cc: users users@ovirt.org Sent: Wednesday, December 17, 2014 1:46:06 PM Subject: Re: [ovirt-users] disk ordering Hello Vered. This is when doing an EL6 install. Disk 1 - which also has the bootable flag turned on in ovirt - sometime does not show up as SDA inside the OS. The secondary disk shows as SDA and the first disk shows as SDB. This is with both disks as virtio -scsi disks. Unfortunately this behaviour is not consistent, it does happen every now and then though.. A colleague hit this issue again last night. From: Vered Volansky ve...@redhat.com To: Paul Jansen vla...@yahoo.com.au Cc: users users@ovirt.org Sent: Wednesday, 17 December 2014, 22:10 Subject: Re: [ovirt-users] disk ordering Hi Paul, Please explain what disk ordering you are referring to. Disk ordering displayed when and where exactly? Thanks, Vered - Original Message - From: Paul Jansen vla...@yahoo.com.au To: users users@ovirt.org Sent: Wednesday, December 17, 2014 3:12:50 AM Subject: [ovirt-users] disk ordering Hello. I've noticed issues with inconsistent disk ordering when doing installs from time to time (on VMs with two disks). I came across this post from Itamar from October 2013 where 'disk ordering' is mentioned as a roadmap item: [Users] oVirt Roadmap feature requests - Summary I haven't found anything more when doing searches. Has any work been done on this, or is there a workaround? This is a little annoying. I never run into this issue under Vmware's ESXi. [Users] oVirt Roadmap feature requests - Summary [Users] oVirt Roadmap feature requests - Summary Itamar Heim iheim at redhat.com Sun Oct 6 15:55:33 EDT 2013 Previous message: [Users] so, what do you want next in oVirt? View on lists.ovirt.org Preview by Yahoo ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [STORAGE] Adding posix compliant FS
On 17/12/14 21:38, Vered Volansky wrote: Hi Julian, Hey Vered, IIUC the you have a self-created lvm, to which you're trying to connect as posix using ovirt. If that's the case please try to manually change the device's permissions to 36:36 under /dev/your_VG. If that doesn't work try the actual device it's mapped to (which is what vdsm actually tries to mount). If that also doesn't work please send us the output of: ls -lh /dev/your_VG . Still failed mate after a chmod 36:36. The thing is though, it _does_ mount the device for a moment before failing and unmounting it... [root@blade01 ~]# ls /dev/VolGroup/lv_images -lh lrwxrwxrwx 1 root root 7 Dec 15 16:52 /dev/VolGroup/lv_images - ../dm-2 [root@blade01 ~]# ls /dev/dm-2 -lh brw-rw 1 vdsm kvm 253, 2 Dec 15 16:52 /dev/dm-2 Regards, Vered - Original Message - From: Julian De Marchi jul...@jdcomputers.com.au To: users@ovirt.org Sent: Wednesday, December 17, 2014 3:35:34 AM Subject: Re: [ovirt-users] [STORAGE] Adding posix compliant FS Think I found some more clues. Thread-21910::DEBUG::2014-12-17 11:26:07,277::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgs --config ' devices { preferred_names = [^/dev/mapper/] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } ' --noheadings --units b --nosuffix --separator '|' --ignoreskippedcluster -o uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name 3ba06bee-861e-4868-8e89-f29f785bab65 (cwd None) Thread-21910::DEBUG::2014-12-17 11:26:07,348::lvm::288::Storage.Misc.excCmd::(cmd) FAILED: err = ' Volume group 3ba06bee-861e-4868-8e89-f29f785bab65 not found\n Skipping volume group 3ba06bee-861e-4868-8e89-f29f785bab65\n'; rc = 5 Thread-21910::WARNING::2014-12-17 11:26:07,350::lvm::370::Storage.LVM::(_reloadvgs) lvm vgs failed: 5 [] [' Volume group 3ba06bee-861e-4868-8e89-f29f785bab65 not found', ' Skipping volume group 3ba06bee-861e-4868-8e89-f29f785bab65'] Thread-21910::DEBUG::2014-12-17 11:26:07,351::lvm::407::Storage.OperationMutex::(_reloadvgs) Operation 'lvm reload operation' released the operation mutex But I still don't understand what it's trying to do. Just to recap, I do see it create the dir and mount the device. But when it fails it umounts everything. I tried to manually create the DIR it is expecting, but ovirt seems to remove it and re-create it which then ends up with root:root. I can see this as when I add the storage I run watch ls -lh and can see it all occur. Any help would still be greatly appreciated! On 12/16/14 19:46, Julian De Marchi wrote: On 16/12/14 17:20, Aharon Canan wrote: Did you chown 36:36 the folder to get the right permissions for adding to ovirt? That's the thing. Ovirt actually creates that dir when I go and try to add the storage. It mounts the LVM device to that dir then fails. In the logs I posted at http://pastebin.com/fzN9ktAX you can see it is failing with a permission denied error. The command that is above the error is touch. I think it is trying to touch a file to ensure all is well and when that fails it gives the error. If I knew where in the code to prefix the touch command with sudo and add a line to the sudoers entry I can test this idea. [...] - Original Message - From: Julian De Marchi jul...@jdcomputers.com.au To: users@ovirt.org Sent: Tuesday, December 16, 2014 4:40:04 AM Subject: Re: [ovirt-users] [STORAGE] Adding posix compliant FS On 12/16/14 08:57, Julian De Marchi wrote: Heya-- I'm using ovirt 3.5 and trying to add a posix compliant FS to a node in my cluster. The storage I'm trying to add is contained within LVM. Below is a link to my log files on the node where I'm trying to attach the storage. http://pastebin.com/fzN9ktAX I've read the ovirt manual for adding posix compliant storage and believe I'm doing everything correct. Any help to get this storage added would be great thanks and if I forgot to include any info please ask. More info to add. I was doing an ls on the dir it does the mount in and saw the dir was owned by root:root with different perms to the ones mounted via NFS. [root@blade01 libvirt]# ls /rhev/data-center/mnt/ -lh total 20K drwxrwxrwx 4 root root 4.0K Dec 11 09:00 10.106.200.100:_VM__IMAGES drwxrwxrwx 3 root root 4.0K Oct 17 09:42 10.106.200.22:_opt_vmexport drwxrwxrwx 4 root root 4.0K Oct 17 09:39 10.106.200.22:_var_lib_libvirt_images drwxr-xr-x 3 root root 4.0K Dec 15 16:52 _dev_mapper_VolGroup-lv__images This could explain why the touch command fails. Still at a loss over the issue though. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing
[ovirt-users] oVirt Weekly Sync Meeting: Dec. 17, 2014
= #ovirt: oVirt Weekly Sync = Meeting started by bkp at 15:06:03 UTC. The full logs are available at http://ovirt.org/meetings/ovirt/2014/ovirt.2014-12-17-15.06.log.html . Minutes: http://ovirt.org/meetings/ovirt/2014/ovirt.2014-12-17-15.06.html Minutes (text): http://ovirt.org/meetings/ovirt/2014/ovirt.2014-12-17-15.06.txt Meeting summary --- * Agenda and Roll Call (bkp, 15:06:23) * infra update (bkp, 15:06:23) * 3.5.z updates (bkp, 15:06:23) * 3.6.0 status (bkp, 15:06:23) * conferences and workshops (bkp, 15:06:23) * other topics (bkp, 15:06:26) * infra update (bkp, 15:07:42) * LINK: http://lists.centos.org/pipermail/centos-virt/2014-December/004187.html (sbonazzo, 15:22:07) * infra update Console access gained to the PHX hosts, and they are now back up. (bkp, 15:23:09) * infra update First nested job is working (thanks fabiand) (bkp, 15:23:12) * infra update First ovirt-node image has been built (thanks tlitovsk) (bkp, 15:23:14) * infra update dcaro should be given a huge round of thanks for his efforts on this project. Good work! (bkp, 15:23:17) * infra update There is currently strong emphasis on getting zuul for gating (testing the patches and merging them after only if it passes the tests) (bkp, 15:23:20) * infra update zuul requirements must be understood (gearmand, some jenkins plugins, some gate jobs, etc. are needed) and then plan on getting all the services going_ (bkp, 15:23:23) * infra update Moving to zuul will also require help from devs to create the gate jobs--jobs that must pass in order to get the patch merged--they should be very reliable (bkp, 15:23:26) * infra update oVirt has formally joined the CentOS Virt sig, and progress is being made to have CentOS host all of the packages we want them to host (Re: http://lists.centos.org/pipermail/centos-virt/2014-December/004187.html). sbonazzo and dcaro will be co-maintainers. (bkp, 15:23:29) * 3.5.z updates (bkp, 15:23:35) * 3.5.z updates Full status at: http://lists.ovirt.org/pipermail/users/2014-December/030048.html (bkp, 15:29:49) * 3.5.z updates One open blocker (1160846) in NEW state; ETA/status of fix: unknown (bkp, 15:29:52) * 3.5.z updates oVirt 3.5.1 RC compose date/time 2015-01-07 0800 UTC (bkp, 15:29:55) * 3.5.z updates oVirt 3.5.1 GA date now 2015-01-14 (bkp, 15:29:58) * 3.5.z updates danken asked to update vdsm in current stable repo, ybronhei had issues with koji. Not sure if we'll have it before holidays (bkp, 15:30:00) * 3.5.z updates There are still 62 bugs targeted to 3.5.1 (http://goo.gl/7G0PDV). Excluding Node and doc bugs, there are 41 bugs. (bkp, 15:30:03) * 3.6 status (bkp, 15:30:26) * LINK: http://www.ovirt.org/Features/UCS_Integration (dr_gogeta86, 15:31:51) * 3.6.0 status Full status at: http://lists.ovirt.org/pipermail/users/2014-December/030049.html (bkp, 15:41:35) * 3.6.0 status Following the review process, the remaining key milestones for this release will be scheduled. (bkp, 15:41:38) * 3.6.0 status There are 461 bugs targeted to 3.6.0 (438 without Node and doc bugs); no known blockers. (bkp, 15:41:41) * ACTION: 3.6.0 status Features proposed for 3.6.0 are now collected in the 3.6 Google doc (http://goo.gl/9X3G49) and must be reviewed by maintainers. (bkp, 15:41:44) * 3.6.0 status Storage: for the better part of the last 2-3 weeks storage has been chasing down EL issues for RHEV, which will also be fixed in oVirt 3.5.1 - amureini still haven't got his head around 3.6.0 to update the doc, which amureini will do soon. Or else. (bkp, 15:41:47) * conferences and workshops (bkp, 15:41:59) * conferences and workshops bkp has *just* learned that oVirt has received a stand of its own for FOSDEM! (bkp, 15:42:14) * conferences and workshops FOSDEM planning was delayed this week, due to FOSDEM notifications not going out. Some lightning talk notifications went out, so ideally information on talks, and devrooms is forthcoming. (bkp, 15:42:32) * conferences and workshops Registration for CfgMgmtCamp 2015 has just(!) opened. There are no plans for a formal oVirt presence, but it is right after FOSDEM in Ghent and if anyone wants to attend, registration is here: http://cfgmgmtcamp.eu/ (bkp, 15:42:54) * conferences and workshops bkp has also just learned that there *will* be an Infrastructure.Next event in Ghent on Feb. 5, contrary to earlier reports. Details to follow. (bkp, 15:43:07) * conferences and workshops bkp is still working with hpillay on possibly running an oVirt workshop around FOSSAsia (http://fossasia.org/) in Singapore Mar 12-16. (bkp, 15:43:23) * conferences and workshops fabiand will be submitting a talk to CeBit (http://www.cebit.de/home) in Hannover Mar
Re: [ovirt-users] Free Ovirt Powered Cloud
I will bring up a node in ipv6 only and see what libvirtd does. I will post my results. -Original Message- From: Dan Kenigsberg [mailto:dan...@redhat.com] Sent: Wednesday, December 17, 2014 2:53 AM To: Donny Davis Cc: 'Lior Vernia'; osvob...@redhat.com Subject: Re: [ovirt-users] Free Ovirt Powered Cloud On Tue, Dec 16, 2014 at 03:26:46PM -0700, Donny Davis wrote: I don't know if libvirt will listen on both ipv4 and ipv6 for incoming consoles?, but if it would I could ditch ipv4 all together, I wouldn't but it would enable ipv6 only customers to connect, and also I could get the direct console working I don't know if qemu/libvirt supports listening on 2 addresses. Too bad this conversion has fallen off the mailing list, where someone could have helped us with this question. Our best option is if you can try this out. Use Ondrej's hook too add an ipv6 address to a network, and see what libvirt does when a VM's display is attached to such a network. Please report your finding on-list! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] FQDN for vm creating with hosted-engine
removal! The disk exists, but at it has changed ID! I don't understand this description. Can you describe to steps to reproduce this issue? Guessing from your description: 1. Create vm with x disks 2. Create template 3. Create vm from template 4. Remove template ? Yes. 1. Create vm with x disks on the DS 3524 through FC (multipathd on vdsm) 2. Create template 3. Create vm (independent) from template 4. Start vm and job in the vm 5. Remove template 6. Stop vm 7. Don`t start vm with error Do you mean - start vm fail with error about missing lv? Yes 8. seek it disk - #lsblk Can you share the output of lsblk both before and after you stop the vm? No, since vm does not start! 9. many command with block 253:20 Not sure what do you mean by that You did not explain what you mean Hm, ?? vgchange Note: do *not* activate all lvs using vgchange -a y Only vdsm should activate its volumes. OK! If vm don`t start, how to take data from vm? Of course if you need to troubshoot the system, and the vm is not running, there is no problem to access the lv directly. Even then, you should *not* activate all lvs in a vg using vgchange -a y But activate only the lv you want to access using lvchange -a y Thank you, did not know 10. mount finded lvm in lvm volume and save data Mount? how mount is related to lvm? VM disk is lv on vdsm. I mounted lv, inside lvm on lv vdsm! You mean you activate the lv on the host? Yes, intro LVM vdsm 12. reboot all vdsm host 13. dont't find ID it disk! ID it disk changed! Please share output of lvs both before and after the vm is stopped. Before -/dev/9d53ecef-8bfc-470b-8867-836bfa7df137/ fb8466c9-0867-4e73-8362-2c95eea89a83 After - /dev/9d53ecef-8bfc-470b-8867-836bfa7df137/33b905e2-23df-49a9- b772-4ebda3b0cd22 This not the output of lvs, these are the symlinks to the active lvs. Can you share the lvs output before and after the vm is stopped? No, since the vm does not start! Now the problem disk has again received old ID(lvdisplay), BUT I have already removed it! I'm not sure what you mean. Can you share the output of lvdisplay before and after the operation? Already is not present, I have removed this problem disk The Mysticism! At me 3 disks on 9 GB, 5 days ago I have removed them. Now I them see till now (lvdisplay on the vdsm host) Why? Did you update lvm cache using pvscan --cache? No. I should after each operation with disks, do in the console pvscan - cache? In general my problem has begun that on Windows 2008 Vm the empty seat has come to an end. What do you mean by that? This is first problem! Second problem - don't start the vm. I have expanded volume in web gui. When I began to expand a disk in VM - error. lvdisplay on the vdsm host has shown the old size of a disk! Is the volume preallocated or thin provisioned? All my disks - prelocated. Preallocated volumes are extended when you modify the volume size in engine ui (as you described). Thin provisioned volumes are extended only when the available space is bellow a threshold, so the lv size will not change after you modify the volume size. Sometimes normally all works! Do you mean that now everything works? The VM it has been removed, since for a week I could not start it! Now all works on others VM. But there were 2 problems! My problem to understand, that I have made not so or it is a problem oVirt. I wish to use oVirt, but is not assured of it because of these problems! How I understand, probably, all ok when you work with VM which are on SPM host??! Lost you here. It agree, a head around )) Thanks Roma -- next part -- An HTML attachment was scrubbed... URL: http://lists.ovirt.org/pipermail/users/attachments/20141216/78dbbd5d/attachment.html -- ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users End of Users Digest, Vol 39, Issue 104 ** -- next part -- An HTML attachment was scrubbed... URL: http://lists.ovirt.org/pipermail/users/attachments/20141217/527d76e5/attachment.html -- ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users End of Users Digest, Vol 39, Issue 107 ** This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original
[ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine
Hi I walked through the installation of ovirt-hosted-engine as http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/ And I met a problem in the step of Configure storage In my ovirt host, I am using nfs v3 for the test. I created two exports points, and just after that I confirmed with other client that I can mount these two points. My /etc/exports is as --- /engine 10.0.0.0/24(rw,sync,no_root_squash,no_all_squash) /data 10.0.0.0/24(rw,sync,no_root_squash,no_all_squash) --- While after I completed the engine VM install, I found these two points can not be mounted again with the same command as mount -t nfs 10.0.0.94:/engine /engine Is ovirt changed something for nfs server configuration or something wrong with my setting? Thanks in advance, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine
- Original Message - From: Cong Yue cong_...@alliedtelesis.com To: users@ovirt.org Sent: Wednesday, December 17, 2014 6:33:48 PM Subject: [ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine Hi I walked through the installation of ovirt-hosted-engine as http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/ And I met a problem in the step of “Configure storage” In my ovirt host, I am using nfs v3 for the test. I created two exports points, and just after that I confirmed with other client that I can mount these two points. My /etc/exports is as --- /engine 10.0.0.0/24(rw,sync,no_root_squash,no_all_squash) /data 10.0.0.0/24(rw,sync,no_root_squash,no_all_squash) --- While after I completed the engine VM install, I found these two points can not be mounted again with the same command as mount –t nfs 10.0.0.94:/engine /engine Is ovirt changed something for nfs server configuration Yes, it's a know issue [1]. Please check iptables rules and re-open NFS required ports. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1109326 We already had a patch for it, it will be included next month in oVirt 3.5.1 or something wrong with my setting? Thanks in advance, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine
- Original Message - From: Simone Tiraboschi stira...@redhat.com To: Cong Yue cong_...@alliedtelesis.com Cc: users@ovirt.org Sent: Wednesday, December 17, 2014 6:43:34 PM Subject: Re: [ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine - Original Message - From: Cong Yue cong_...@alliedtelesis.com To: users@ovirt.org Sent: Wednesday, December 17, 2014 6:33:48 PM Subject: [ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine Hi I walked through the installation of ovirt-hosted-engine as http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3-5/ And I met a problem in the step of “Configure storage” In my ovirt host, I am using nfs v3 for the test. I created two exports points, and just after that I confirmed with other client that I can mount these two points. My /etc/exports is as --- /engine 10.0.0.0/24(rw,sync,no_root_squash,no_all_squash) /data 10.0.0.0/24(rw,sync,no_root_squash,no_all_squash) --- While after I completed the engine VM install, I found these two points can not be mounted again with the same command as mount –t nfs 10.0.0.94:/engine /engine Is ovirt changed something for nfs server configuration Yes, it's a know issue [1]. Please check iptables rules and re-open NFS required ports. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1109326 We already had a patch for it, it will be included next month in oVirt 3.5.1 Oh, it's note really the same: this it's related to hosted-engine but is not that different. Please check iptables rules. or something wrong with my setting? Thanks in advance, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine
Thanks. I just want to double confirm whether I do the right thing or not. Currently, my /etc/sysconfig/iptables is like -- # oVirt default firewall configuration. Automatically generated by vdsm bootstrap script. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -i lo -j ACCEPT # vdsm -A INPUT -p tcp --dport 54321 -j ACCEPT # SSH -A INPUT -p tcp --dport 22 -j ACCEPT # snmp -A INPUT -p udp --dport 161 -j ACCEPT # libvirt tls -A INPUT -p tcp --dport 16514 -j ACCEPT # guest consoles -A INPUT -p tcp -m multiport --dports 5900:6923 -j ACCEPT # migration -A INPUT -p tcp -m multiport --dports 49152:49216 -j ACCEPT # Reject any other input traffic -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -m physdev ! --physdev-is-bridged -j REJECT --reject-with icmp-host-prohibited COMMIT -- Do you mean I need to add the following rule to the table? -- ACCEPT tcp -- 0.0.0.0/00.0.0.0/0 state NEW tcp dpt:6100 ACCEPT tcp -- 0.0.0.0/00.0.0.0/0 state NEW tcp dpt:111 ACCEPT udp -- 0.0.0.0/00.0.0.0/0 state NEW udp dpt:111 ACCEPT tcp -- 0.0.0.0/00.0.0.0/0 state NEW tcp dpt:662 ACCEPT udp -- 0.0.0.0/00.0.0.0/0 state NEW udp dpt:662 ACCEPT tcp -- 0.0.0.0/00.0.0.0/0 state NEW tcp dpt:875 ACCEPT udp -- 0.0.0.0/00.0.0.0/0 state NEW udp dpt:875 ACCEPT tcp -- 0.0.0.0/00.0.0.0/0 state NEW tcp dpt:892 ACCEPT udp -- 0.0.0.0/00.0.0.0/0 state NEW udp dpt:892 ACCEPT tcp -- 0.0.0.0/00.0.0.0/0 state NEW tcp dpt:2049 ACCEPT udp -- 0.0.0.0/00.0.0.0/0 state NEW udp dpt:32769 ACCEPT tcp -- 0.0.0.0/00.0.0.0/0 state NEW tcp dpt:32803 -- Thanks in advance, Cong -Original Message- From: Simone Tiraboschi [mailto:stira...@redhat.com] Sent: Wednesday, December 17, 2014 9:48 AM To: Yue, Cong Cc: users@ovirt.org Subject: Re: [ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine - Original Message - From: Simone Tiraboschi stira...@redhat.com To: Cong Yue cong_...@alliedtelesis.com Cc: users@ovirt.org Sent: Wednesday, December 17, 2014 6:43:34 PM Subject: Re: [ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine - Original Message - From: Cong Yue cong_...@alliedtelesis.com To: users@ovirt.org Sent: Wednesday, December 17, 2014 6:33:48 PM Subject: [ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine Hi I walked through the installation of ovirt-hosted-engine as http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3 -5/ And I met a problem in the step of “Configure storage” In my ovirt host, I am using nfs v3 for the test. I created two exports points, and just after that I confirmed with other client that I can mount these two points. My /etc/exports is as --- /engine 10.0.0.0/24(rw,sync,no_root_squash,no_all_squash) /data 10.0.0.0/24(rw,sync,no_root_squash,no_all_squash) --- While after I completed the engine VM install, I found these two points can not be mounted again with the same command as mount –t nfs 10.0.0.94:/engine /engine Is ovirt changed something for nfs server configuration Yes, it's a know issue [1]. Please check iptables rules and re-open NFS required ports. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1109326 We already had a patch for it, it will be included next month in oVirt 3.5.1 Oh, it's note really the same: this it's related to hosted-engine but is not that different. Please check iptables rules. or something wrong with my setting? Thanks in advance, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review,
[ovirt-users] console viewer for ovrit engine
Hi I finally created VM and it seems work well. But for the administrator menu,but I can not show the browser-embeded console, noVNC and Spice HTML5 browser client. I am using firefox and chrome in Ubuntu 14.04 desktop OS. Is there any setting or requirements for the browser-embeded console viewer? Also if I select other console options as native client, one .w file will be downloaded, what is the recommendation to open these .w files with some native viewer for Ubuntu 14.04 desktop? Thanks, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] console viewer for ovrit engine
Have you setup the websocket proxy? From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Yue, Cong Sent: Wednesday, December 17, 2014 12:22 PM To: users@ovirt.org Subject: [ovirt-users] console viewer for ovrit engine Hi I finally created VM and it seems work well. But for the administrator menu,but I can not show the browser-embeded console, noVNC and Spice HTML5 browser client. I am using firefox and chrome in Ubuntu 14.04 desktop OS. Is there any setting or requirements for the browser-embeded console viewer? Also if I select other console options as native client, one .w file will be downloaded, what is the recommendation to open these .w files with some native viewer for Ubuntu 14.04 desktop? Thanks, Cong _ This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine
No, it was not realted with selinux. It is the same issue as Simone advised. Yes, it's a know issue [1]. Please check iptables rules and re-open NFS required ports. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1109326 What I did is to add the lost iptables rules into /etc/sysconfig/iptables and restarted iptables service. Thanks, Cong -Original Message- From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 11:24 AM To: Yue, Cong; users@ovirt.org Subject: RE: [ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine So was it an selinux issue? What was your resolution -Original Message- From: Yue, Cong [mailto:cong_...@alliedtelesis.com] Sent: Wednesday, December 17, 2014 12:13 PM To: Donny Davis Subject: RE: [ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine I checked and now it works for me. Thanks -Original Message- From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 10:42 AM To: Yue, Cong Subject: RE: [ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine did you check /var/log/audit/aduit.log -Original Message- From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Yue, Cong Sent: Wednesday, December 17, 2014 11:18 AM To: Simone Tiraboschi Cc: users@ovirt.org Subject: Re: [ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine Thanks. I just want to double confirm whether I do the right thing or not. Currently, my /etc/sysconfig/iptables is like -- # oVirt default firewall configuration. Automatically generated by vdsm bootstrap script. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -i lo -j ACCEPT # vdsm -A INPUT -p tcp --dport 54321 -j ACCEPT # SSH -A INPUT -p tcp --dport 22 -j ACCEPT # snmp -A INPUT -p udp --dport 161 -j ACCEPT # libvirt tls -A INPUT -p tcp --dport 16514 -j ACCEPT # guest consoles -A INPUT -p tcp -m multiport --dports 5900:6923 -j ACCEPT # migration -A INPUT -p tcp -m multiport --dports 49152:49216 -j ACCEPT # Reject any other input traffic -A INPUT -j REJECT --reject-with icmp-host-prohibited -A FORWARD -m physdev ! --physdev-is-bridged -j REJECT --reject-with icmp-host-prohibited COMMIT -- Do you mean I need to add the following rule to the table? -- ACCEPT tcp -- 0.0.0.0/00.0.0.0/0 state NEW tcp dpt:6100 ACCEPT tcp -- 0.0.0.0/00.0.0.0/0 state NEW tcp dpt:111 ACCEPT udp -- 0.0.0.0/00.0.0.0/0 state NEW udp dpt:111 ACCEPT tcp -- 0.0.0.0/00.0.0.0/0 state NEW tcp dpt:662 ACCEPT udp -- 0.0.0.0/00.0.0.0/0 state NEW udp dpt:662 ACCEPT tcp -- 0.0.0.0/00.0.0.0/0 state NEW tcp dpt:875 ACCEPT udp -- 0.0.0.0/00.0.0.0/0 state NEW udp dpt:875 ACCEPT tcp -- 0.0.0.0/00.0.0.0/0 state NEW tcp dpt:892 ACCEPT udp -- 0.0.0.0/00.0.0.0/0 state NEW udp dpt:892 ACCEPT tcp -- 0.0.0.0/00.0.0.0/0 state NEW tcp dpt:2049 ACCEPT udp -- 0.0.0.0/00.0.0.0/0 state NEW udp dpt:32769 ACCEPT tcp -- 0.0.0.0/00.0.0.0/0 state NEW tcp dpt:32803 -- Thanks in advance, Cong -Original Message- From: Simone Tiraboschi [mailto:stira...@redhat.com] Sent: Wednesday, December 17, 2014 9:48 AM To: Yue, Cong Cc: users@ovirt.org Subject: Re: [ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine - Original Message - From: Simone Tiraboschi stira...@redhat.com To: Cong Yue cong_...@alliedtelesis.com Cc: users@ovirt.org Sent: Wednesday, December 17, 2014 6:43:34 PM Subject: Re: [ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine - Original Message - From: Cong Yue cong_...@alliedtelesis.com To: users@ovirt.org Sent: Wednesday, December 17, 2014 6:33:48 PM Subject: [ovirt-users] NFS can not be mounted after the installation of ovirt-hosted-engine Hi I walked through the installation of ovirt-hosted-engine as http://community.redhat.com/blog/2014/10/up-and-running-with-ovirt-3 -5/ And I met a problem in the step of “Configure storage” In my ovirt host, I am using nfs v3 for the test. I created two exports points, and just after that I confirmed with other client that I can mount these two points. My /etc/exports is as --- /engine 10.0.0.0/24(rw,sync,no_root_squash,no_all_squash) /data 10.0.0.0/24(rw,sync,no_root_squash,no_all_squash) --- While after I completed the engine VM install, I found these two points can not be mounted again with the same command
Re: [ovirt-users] console viewer for ovrit engine
I just use the default setting for websocket. How can I check whether it is set correct or not? The message for me is connect timeout. Thanks, Cong From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 11:25 AM To: Yue, Cong; users@ovirt.org Subject: RE: [ovirt-users] console viewer for ovrit engine Have you setup the websocket proxy? From: users-boun...@ovirt.orgmailto:users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Yue, Cong Sent: Wednesday, December 17, 2014 12:22 PM To: users@ovirt.orgmailto:users@ovirt.org Subject: [ovirt-users] console viewer for ovrit engine Hi I finally created VM and it seems work well. But for the administrator menu,but I can not show the browser-embeded console, noVNC and Spice HTML5 browser client. I am using firefox and chrome in Ubuntu 14.04 desktop OS. Is there any setting or requirements for the browser-embeded console viewer? Also if I select other console options as native client, one .w file will be downloaded, what is the recommendation to open these .w files with some native viewer for Ubuntu 14.04 desktop? Thanks, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] console viewer for ovrit engine
On 12/17/2014 04:26 PM, Dan Yasny wrote: On Wed, Dec 17, 2014 at 2:22 PM, Yue, Cong cong_...@alliedtelesis.com mailto:cong_...@alliedtelesis.com wrote: Hi I finally created VM and it seems work well. But for the administrator menu,but I can not show the browser-embeded console, noVNC and Spice HTML5 browser client. I am using firefox and chrome in Ubuntu 14.04 desktop OS. Is there any setting or requirements for the browser-embeded console viewer? html5 support is all you need iirc And install the CA cert on your browser. Also if I select other console options as native client, one .w file will be downloaded, what is the recommendation to open these .w files with some native viewer for Ubuntu 14.04 desktop? The file should be opened by virt-viewer (remote-viewer) Thanks, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.org mailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] console viewer for ovrit engine
That's because its trying to connect to a websocket proxy that doesn't exist. Give this a spin http://www.ovirt.org/Features/noVNC_console From: Yue, Cong [mailto:cong_...@alliedtelesis.com] Sent: Wednesday, December 17, 2014 12:32 PM To: Donny Davis; users@ovirt.org Subject: RE: [ovirt-users] console viewer for ovrit engine I just use the default setting for websocket. How can I check whether it is set correct or not? The message for me is connect timeout. Thanks, Cong From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 11:25 AM To: Yue, Cong; users@ovirt.org Subject: RE: [ovirt-users] console viewer for ovrit engine Have you setup the websocket proxy? From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Yue, Cong Sent: Wednesday, December 17, 2014 12:22 PM To: users@ovirt.org Subject: [ovirt-users] console viewer for ovrit engine Hi I finally created VM and it seems work well. But for the administrator menu,but I can not show the browser-embeded console, noVNC and Spice HTML5 browser client. I am using firefox and chrome in Ubuntu 14.04 desktop OS. Is there any setting or requirements for the browser-embeded console viewer? Also if I select other console options as native client, one .w file will be downloaded, what is the recommendation to open these .w files with some native viewer for Ubuntu 14.04 desktop? Thanks, Cong _ This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. _ This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] console viewer for ovrit engine
Is it error 1006 in the novnc console, or connection timeout 1006 = you need to trust the CA connection timeout = you don't have a connection setup, or iptables is not allowing port 6100 in Try stopping iptables or adding the correct rule iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT or the more permenant method vi /etc/sysconfig/iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT service iptables restart From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Amador Pahim Sent: Wednesday, December 17, 2014 12:34 PM To: Dan Yasny; Yue, Cong Cc: users@ovirt.org Subject: Re: [ovirt-users] console viewer for ovrit engine On 12/17/2014 04:26 PM, Dan Yasny wrote: On Wed, Dec 17, 2014 at 2:22 PM, Yue, Cong cong_...@alliedtelesis.com wrote: Hi I finally created VM and it seems work well. But for the administrator menu,but I can not show the browser-embeded console, noVNC and Spice HTML5 browser client. I am using firefox and chrome in Ubuntu 14.04 desktop OS. Is there any setting or requirements for the browser-embeded console viewer? html5 support is all you need iirc And install the CA cert on your browser. Also if I select other console options as native client, one .w file will be downloaded, what is the recommendation to open these .w files with some native viewer for Ubuntu 14.04 desktop? The file should be opened by virt-viewer (remote-viewer) Thanks, Cong _ This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] console viewer for ovrit engine
Thanks for the reply. I am trying to install the ca.crt to my chrome. But during the installation, password is asked, I tried with the only password of my admin password, but it failed. Is there any other password for this? Thanks, Cong From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 11:38 AM To: 'Amador Pahim'; 'Dan Yasny'; Yue, Cong Cc: users@ovirt.org Subject: RE: [ovirt-users] console viewer for ovrit engine Is it error 1006 in the novnc console, or connection timeout 1006 = you need to trust the CA connection timeout = you don't have a connection setup, or iptables is not allowing port 6100 in Try stopping iptables or adding the correct rule iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT or the more permenant method vi /etc/sysconfig/iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT service iptables restart From: users-boun...@ovirt.orgmailto:users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Amador Pahim Sent: Wednesday, December 17, 2014 12:34 PM To: Dan Yasny; Yue, Cong Cc: users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] console viewer for ovrit engine On 12/17/2014 04:26 PM, Dan Yasny wrote: On Wed, Dec 17, 2014 at 2:22 PM, Yue, Cong cong_...@alliedtelesis.commailto:cong_...@alliedtelesis.com wrote: Hi I finally created VM and it seems work well. But for the administrator menu,but I can not show the browser-embeded console, noVNC and Spice HTML5 browser client. I am using firefox and chrome in Ubuntu 14.04 desktop OS. Is there any setting or requirements for the browser-embeded console viewer? html5 support is all you need iirc And install the CA cert on your browser. Also if I select other console options as native client, one .w file will be downloaded, what is the recommendation to open these .w files with some native viewer for Ubuntu 14.04 desktop? The file should be opened by virt-viewer (remote-viewer) Thanks, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] console viewer for ovrit engine
On Wednesday, December 17, 2014 11:42:59 AM Yue, Cong wrote: Thanks for the reply. I am trying to install the ca.crt to my chrome. But during the installation, password is asked, I tried with the only password of my admin password, but it failed. Is there any other password for this? Thanks, Cong You need to import the certificate as an Authority, not as a regular certificate. Also check that it can sign other certificate, there should be 3 checkboxes if you import it in the right location. From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 11:38 AM To: 'Amador Pahim'; 'Dan Yasny'; Yue, Cong Cc: users@ovirt.org Subject: RE: [ovirt-users] console viewer for ovrit engine Is it error 1006 in the novnc console, or connection timeout 1006 = you need to trust the CA connection timeout = you don't have a connection setup, or iptables is not allowing port 6100 in Try stopping iptables or adding the correct rule iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT or the more permenant method vi /etc/sysconfig/iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT service iptables restart From: users-boun...@ovirt.orgmailto:users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Amador Pahim Sent: Wednesday, December 17, 2014 12:34 PM To: Dan Yasny; Yue, Cong Cc: users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] console viewer for ovrit engine On 12/17/2014 04:26 PM, Dan Yasny wrote: On Wed, Dec 17, 2014 at 2:22 PM, Yue, Cong cong_...@alliedtelesis.commailto:cong_...@alliedtelesis.com wrote: Hi I finally created VM and it seems work well. But for the administrator menu,but I can not show the browser-embeded console, noVNC and Spice HTML5 browser client. I am using firefox and chrome in Ubuntu 14.04 desktop OS. Is there any setting or requirements for the browser-embeded console viewer? html5 support is all you need iirc And install the CA cert on your browser. Also if I select other console options as native client, one .w file will be downloaded, what is the recommendation to open these .w files with some native viewer for Ubuntu 14.04 desktop? The file should be opened by virt-viewer (remote-viewer) Thanks, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] console viewer for ovrit engine
Also if I select other console options as native client, one .w file will be downloaded, what is the recommendation to open these .w files with some native viewer for Ubuntu 14.04 desktop? The file should be opened by virt-viewer (remote-viewer) I installed virt-viewer into my PC. And also I have the console.vv downloaded from the browser. How can I launch virt-viewer with that vv file? I tried with virt-viewer console.vv, but it seems it is wronfg. Thank From: Amador Pahim [mailto:apa...@redhat.com] Sent: Wednesday, December 17, 2014 11:34 AM To: Dan Yasny; Yue, Cong Cc: users@ovirt.org Subject: Re: [ovirt-users] console viewer for ovrit engine On 12/17/2014 04:26 PM, Dan Yasny wrote: On Wed, Dec 17, 2014 at 2:22 PM, Yue, Cong cong_...@alliedtelesis.commailto:cong_...@alliedtelesis.com wrote: Hi I finally created VM and it seems work well. But for the administrator menu,but I can not show the browser-embeded console, noVNC and Spice HTML5 browser client. I am using firefox and chrome in Ubuntu 14.04 desktop OS. Is there any setting or requirements for the browser-embeded console viewer? html5 support is all you need iirc And install the CA cert on your browser. Also if I select other console options as native client, one .w file will be downloaded, what is the recommendation to open these .w files with some native viewer for Ubuntu 14.04 desktop? The file should be opened by virt-viewer (remote-viewer) Thanks, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] console viewer for ovrit engine
he said he was using chrome, and chrome doesn't ask it downloads you then need to open the settings, and advanced... import to the trusted CA store -Original Message- From: Alexander Wels [mailto:aw...@redhat.com] Sent: Wednesday, December 17, 2014 12:47 PM To: users@ovirt.org Cc: Yue, Cong; Donny Davis; 'Amador Pahim'; 'Dan Yasny' Subject: Re: [ovirt-users] console viewer for ovrit engine On Wednesday, December 17, 2014 11:42:59 AM Yue, Cong wrote: Thanks for the reply. I am trying to install the ca.crt to my chrome. But during the installation, password is asked, I tried with the only password of my admin password, but it failed. Is there any other password for this? Thanks, Cong You need to import the certificate as an Authority, not as a regular certificate. Also check that it can sign other certificate, there should be 3 checkboxes if you import it in the right location. From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 11:38 AM To: 'Amador Pahim'; 'Dan Yasny'; Yue, Cong Cc: users@ovirt.org Subject: RE: [ovirt-users] console viewer for ovrit engine Is it error 1006 in the novnc console, or connection timeout 1006 = you need to trust the CA connection timeout = you don't have a connection setup, or iptables is not allowing port 6100 in Try stopping iptables or adding the correct rule iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT or the more permenant method vi /etc/sysconfig/iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT service iptables restart From: users-boun...@ovirt.orgmailto:users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Amador Pahim Sent: Wednesday, December 17, 2014 12:34 PM To: Dan Yasny; Yue, Cong Cc: users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] console viewer for ovrit engine On 12/17/2014 04:26 PM, Dan Yasny wrote: On Wed, Dec 17, 2014 at 2:22 PM, Yue, Cong cong_...@alliedtelesis.commailto:cong_...@alliedtelesis.com wrote: Hi I finally created VM and it seems work well. But for the administrator menu,but I can not show the browser-embeded console, noVNC and Spice HTML5 browser client. I am using firefox and chrome in Ubuntu 14.04 desktop OS. Is there any setting or requirements for the browser-embeded console viewer? html5 support is all you need iirc And install the CA cert on your browser. Also if I select other console options as native client, one .w file will be downloaded, what is the recommendation to open these .w files with some native viewer for Ubuntu 14.04 desktop? The file should be opened by virt-viewer (remote-viewer) Thanks, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] console viewer for ovrit engine
I installed the cert as authorities from chrome advanced setting. But it still nothing message for Spice html5 client, and connection timeout for noVNC. By the way I also already add rule accept 6100 tcp port. Is there some log I can check ? Thanks, Cong -Original Message- From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 11:51 AM To: aw...@redhat.com; users@ovirt.org Cc: Yue, Cong; 'Amador Pahim'; 'Dan Yasny' Subject: RE: [ovirt-users] console viewer for ovrit engine he said he was using chrome, and chrome doesn't ask it downloads you then need to open the settings, and advanced... import to the trusted CA store -Original Message- From: Alexander Wels [mailto:aw...@redhat.com] Sent: Wednesday, December 17, 2014 12:47 PM To: users@ovirt.org Cc: Yue, Cong; Donny Davis; 'Amador Pahim'; 'Dan Yasny' Subject: Re: [ovirt-users] console viewer for ovrit engine On Wednesday, December 17, 2014 11:42:59 AM Yue, Cong wrote: Thanks for the reply. I am trying to install the ca.crt to my chrome. But during the installation, password is asked, I tried with the only password of my admin password, but it failed. Is there any other password for this? Thanks, Cong You need to import the certificate as an Authority, not as a regular certificate. Also check that it can sign other certificate, there should be 3 checkboxes if you import it in the right location. From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 11:38 AM To: 'Amador Pahim'; 'Dan Yasny'; Yue, Cong Cc: users@ovirt.org Subject: RE: [ovirt-users] console viewer for ovrit engine Is it error 1006 in the novnc console, or connection timeout 1006 = you need to trust the CA connection timeout = you don't have a connection setup, or iptables is not allowing port 6100 in Try stopping iptables or adding the correct rule iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT or the more permenant method vi /etc/sysconfig/iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT service iptables restart From: users-boun...@ovirt.orgmailto:users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Amador Pahim Sent: Wednesday, December 17, 2014 12:34 PM To: Dan Yasny; Yue, Cong Cc: users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] console viewer for ovrit engine On 12/17/2014 04:26 PM, Dan Yasny wrote: On Wed, Dec 17, 2014 at 2:22 PM, Yue, Cong cong_...@alliedtelesis.commailto:cong_...@alliedtelesis.com wrote: Hi I finally created VM and it seems work well. But for the administrator menu,but I can not show the browser-embeded console, noVNC and Spice HTML5 browser client. I am using firefox and chrome in Ubuntu 14.04 desktop OS. Is there any setting or requirements for the browser-embeded console viewer? html5 support is all you need iirc And install the CA cert on your browser. Also if I select other console options as native client, one .w file will be downloaded, what is the recommendation to open these .w files with some native viewer for Ubuntu 14.04 desktop? The file should be opened by virt-viewer (remote-viewer) Thanks, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the
Re: [ovirt-users] console viewer for ovrit engine
netstat -tunlp |grep 6100 -Original Message- From: Yue, Cong [mailto:cong_...@alliedtelesis.com] Sent: Wednesday, December 17, 2014 12:56 PM To: Donny Davis; aw...@redhat.com; users@ovirt.org Cc: 'Amador Pahim'; 'Dan Yasny' Subject: RE: [ovirt-users] console viewer for ovrit engine I installed the cert as authorities from chrome advanced setting. But it still nothing message for Spice html5 client, and connection timeout for noVNC. By the way I also already add rule accept 6100 tcp port. Is there some log I can check ? Thanks, Cong -Original Message- From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 11:51 AM To: aw...@redhat.com; users@ovirt.org Cc: Yue, Cong; 'Amador Pahim'; 'Dan Yasny' Subject: RE: [ovirt-users] console viewer for ovrit engine he said he was using chrome, and chrome doesn't ask it downloads you then need to open the settings, and advanced... import to the trusted CA store -Original Message- From: Alexander Wels [mailto:aw...@redhat.com] Sent: Wednesday, December 17, 2014 12:47 PM To: users@ovirt.org Cc: Yue, Cong; Donny Davis; 'Amador Pahim'; 'Dan Yasny' Subject: Re: [ovirt-users] console viewer for ovrit engine On Wednesday, December 17, 2014 11:42:59 AM Yue, Cong wrote: Thanks for the reply. I am trying to install the ca.crt to my chrome. But during the installation, password is asked, I tried with the only password of my admin password, but it failed. Is there any other password for this? Thanks, Cong You need to import the certificate as an Authority, not as a regular certificate. Also check that it can sign other certificate, there should be 3 checkboxes if you import it in the right location. From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 11:38 AM To: 'Amador Pahim'; 'Dan Yasny'; Yue, Cong Cc: users@ovirt.org Subject: RE: [ovirt-users] console viewer for ovrit engine Is it error 1006 in the novnc console, or connection timeout 1006 = you need to trust the CA connection timeout = you don't have a connection setup, or iptables is not allowing port 6100 in Try stopping iptables or adding the correct rule iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT or the more permenant method vi /etc/sysconfig/iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT service iptables restart From: users-boun...@ovirt.orgmailto:users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Amador Pahim Sent: Wednesday, December 17, 2014 12:34 PM To: Dan Yasny; Yue, Cong Cc: users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] console viewer for ovrit engine On 12/17/2014 04:26 PM, Dan Yasny wrote: On Wed, Dec 17, 2014 at 2:22 PM, Yue, Cong cong_...@alliedtelesis.commailto:cong_...@alliedtelesis.com wrote: Hi I finally created VM and it seems work well. But for the administrator menu,but I can not show the browser-embeded console, noVNC and Spice HTML5 browser client. I am using firefox and chrome in Ubuntu 14.04 desktop OS. Is there any setting or requirements for the browser-embeded console viewer? html5 support is all you need iirc And install the CA cert on your browser. Also if I select other console options as native client, one .w file will be downloaded, what is the recommendation to open these .w files with some native viewer for Ubuntu 14.04 desktop? The file should be opened by virt-viewer (remote-viewer) Thanks, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. This e-mail message is for the sole
[ovirt-users] gmail bounces [was Re: oVirt Weekly Sync Meeting: Dec. 17, 2014
On Wed, 17 Dec 2014 10:55:24 -0500 (EST) Brian wrote: BP * other topics There is a known problem with gmail subscribers to the BP oVirt Users mailing list getting excessive bounces. Still trying to BP puzzle this one out. Anyone with Mailman mojo is more than welcome BP to lend a hand. (bkp, 15:49:27) I'v heard of this issue on other lists. This link seems to have a pretty good breakdown of what the issue might be (but unfortunately not a solution). http://robbat2.livejournal.com/241253.html Robert -- Senior Software Engineer @ Parsons signature.asc Description: PGP signature ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] event monitoring
1. zenoss has an ovirt plugin that will email you 2. nagios has an ovirt plugin, and nagios will email you 3. write a script No offcial way that I know of I'm running zenoss because it's easier than nagios to setup… From: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Demeter Tibor Sent: Wednesday, December 17, 2014 1:18 PM To: users@ovirt.org List Subject: [ovirt-users] event monitoring Hi, How can I get email notifications of ovirt events? Is there an official way? Thanks Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] event monitoring
in the oVirt web-admin: select the 'Users' main tab - select the relevant user (typically the one with which you are logging into the oVirt web-admin) - select the 'Event Notifier' sub-tab - click on the 'Manage Events' button - within the 'Add Event Notification' dialog: select desired events and fill an e-mail address - click 'OK'. see http://i.imgur.com/8V3NQFu.png. as noted in the 'Add Event Notification' dialog: To receive email notifications, ensure that the mail server is configured and the ovirt-event-notifier service is running. Thanks, Einav - Original Message - From: Demeter Tibor tdeme...@itsmart.hu To: users@ovirt.org List users@ovirt.org Sent: Wednesday, December 17, 2014 3:18:19 PM Subject: [ovirt-users] event monitoring Hi, How can I get email notifications of ovirt events? Is there an official way? Thanks Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] EXTNET Hook and Libvirtd Default Network Setup
All, I'm testing out oVirt for one of our projects that wants to try an all-in-one setup before going to a larger deployment. For their testing, they want to use the default NAT'd network from libvirtd on the host. I've install oVirt, installed the extnet hook, enabled IP forwarding in sysctl.conf and loaded the setting, and created a vm that attaches to the libvirtd default network and gets an IP. The VM can ssh to the virbr0 IP address, in this case 192.168.122.1, to access the host. However, the VM cannot reach any IP address off of the NAT'd subnet. I haven't changed any of the default iptables rules that oVirt and libvirtd create. Looking at ip route and the iptables rules, I feel that traffic should be getting directed appropriately. Does anyone have any thoughts as to what the issue may be? For some reason, the ovirtmgmt bridge doesn't seem to be receiving or allowing traffic from virbr0 to pass across it. I can provide more information if that would be helpful! Andrew Wagner ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] console viewer for ovrit engine
Thanks, but I can not get any log. As for I am using centos 7, I used the commands as ss |grep 6100 ip -s link |grep 6100 Is there any way to open console.vv with virt-viewer? Thanks, Cong -Original Message- From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 12:05 PM To: Yue, Cong; aw...@redhat.com; users@ovirt.org Cc: 'Amador Pahim'; 'Dan Yasny' Subject: RE: [ovirt-users] console viewer for ovrit engine netstat -tunlp |grep 6100 -Original Message- From: Yue, Cong [mailto:cong_...@alliedtelesis.com] Sent: Wednesday, December 17, 2014 12:56 PM To: Donny Davis; aw...@redhat.com; users@ovirt.org Cc: 'Amador Pahim'; 'Dan Yasny' Subject: RE: [ovirt-users] console viewer for ovrit engine I installed the cert as authorities from chrome advanced setting. But it still nothing message for Spice html5 client, and connection timeout for noVNC. By the way I also already add rule accept 6100 tcp port. Is there some log I can check ? Thanks, Cong -Original Message- From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 11:51 AM To: aw...@redhat.com; users@ovirt.org Cc: Yue, Cong; 'Amador Pahim'; 'Dan Yasny' Subject: RE: [ovirt-users] console viewer for ovrit engine he said he was using chrome, and chrome doesn't ask it downloads you then need to open the settings, and advanced... import to the trusted CA store -Original Message- From: Alexander Wels [mailto:aw...@redhat.com] Sent: Wednesday, December 17, 2014 12:47 PM To: users@ovirt.org Cc: Yue, Cong; Donny Davis; 'Amador Pahim'; 'Dan Yasny' Subject: Re: [ovirt-users] console viewer for ovrit engine On Wednesday, December 17, 2014 11:42:59 AM Yue, Cong wrote: Thanks for the reply. I am trying to install the ca.crt to my chrome. But during the installation, password is asked, I tried with the only password of my admin password, but it failed. Is there any other password for this? Thanks, Cong You need to import the certificate as an Authority, not as a regular certificate. Also check that it can sign other certificate, there should be 3 checkboxes if you import it in the right location. From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 11:38 AM To: 'Amador Pahim'; 'Dan Yasny'; Yue, Cong Cc: users@ovirt.org Subject: RE: [ovirt-users] console viewer for ovrit engine Is it error 1006 in the novnc console, or connection timeout 1006 = you need to trust the CA connection timeout = you don't have a connection setup, or iptables is not allowing port 6100 in Try stopping iptables or adding the correct rule iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT or the more permenant method vi /etc/sysconfig/iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT service iptables restart From: users-boun...@ovirt.orgmailto:users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Amador Pahim Sent: Wednesday, December 17, 2014 12:34 PM To: Dan Yasny; Yue, Cong Cc: users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] console viewer for ovrit engine On 12/17/2014 04:26 PM, Dan Yasny wrote: On Wed, Dec 17, 2014 at 2:22 PM, Yue, Cong cong_...@alliedtelesis.commailto:cong_...@alliedtelesis.com wrote: Hi I finally created VM and it seems work well. But for the administrator menu,but I can not show the browser-embeded console, noVNC and Spice HTML5 browser client. I am using firefox and chrome in Ubuntu 14.04 desktop OS. Is there any setting or requirements for the browser-embeded console viewer? html5 support is all you need iirc And install the CA cert on your browser. Also if I select other console options as native client, one .w file will be downloaded, what is the recommendation to open these .w files with some native viewer for Ubuntu 14.04 desktop? The file should be opened by virt-viewer (remote-viewer) Thanks, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.orgmailto:Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged
Re: [ovirt-users] console viewer for ovrit engine
that's because its not listening on 6100 yum install ovirt-websocket-proxy (optional net-tools) systemctl start ovirt-websocket-proxy -Original Message- From: Yue, Cong [mailto:cong_...@alliedtelesis.com] Sent: Wednesday, December 17, 2014 2:16 PM To: Donny Davis; aw...@redhat.com; users@ovirt.org Cc: 'Amador Pahim'; 'Dan Yasny' Subject: RE: [ovirt-users] console viewer for ovrit engine Thanks, but I can not get any log. As for I am using centos 7, I used the commands as ss |grep 6100 ip -s link |grep 6100 Is there any way to open console.vv with virt-viewer? Thanks, Cong -Original Message- From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 12:05 PM To: Yue, Cong; aw...@redhat.com; users@ovirt.org Cc: 'Amador Pahim'; 'Dan Yasny' Subject: RE: [ovirt-users] console viewer for ovrit engine netstat -tunlp |grep 6100 -Original Message- From: Yue, Cong [mailto:cong_...@alliedtelesis.com] Sent: Wednesday, December 17, 2014 12:56 PM To: Donny Davis; aw...@redhat.com; users@ovirt.org Cc: 'Amador Pahim'; 'Dan Yasny' Subject: RE: [ovirt-users] console viewer for ovrit engine I installed the cert as authorities from chrome advanced setting. But it still nothing message for Spice html5 client, and connection timeout for noVNC. By the way I also already add rule accept 6100 tcp port. Is there some log I can check ? Thanks, Cong -Original Message- From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 11:51 AM To: aw...@redhat.com; users@ovirt.org Cc: Yue, Cong; 'Amador Pahim'; 'Dan Yasny' Subject: RE: [ovirt-users] console viewer for ovrit engine he said he was using chrome, and chrome doesn't ask it downloads you then need to open the settings, and advanced... import to the trusted CA store -Original Message- From: Alexander Wels [mailto:aw...@redhat.com] Sent: Wednesday, December 17, 2014 12:47 PM To: users@ovirt.org Cc: Yue, Cong; Donny Davis; 'Amador Pahim'; 'Dan Yasny' Subject: Re: [ovirt-users] console viewer for ovrit engine On Wednesday, December 17, 2014 11:42:59 AM Yue, Cong wrote: Thanks for the reply. I am trying to install the ca.crt to my chrome. But during the installation, password is asked, I tried with the only password of my admin password, but it failed. Is there any other password for this? Thanks, Cong You need to import the certificate as an Authority, not as a regular certificate. Also check that it can sign other certificate, there should be 3 checkboxes if you import it in the right location. From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 11:38 AM To: 'Amador Pahim'; 'Dan Yasny'; Yue, Cong Cc: users@ovirt.org Subject: RE: [ovirt-users] console viewer for ovrit engine Is it error 1006 in the novnc console, or connection timeout 1006 = you need to trust the CA connection timeout = you don't have a connection setup, or iptables is not allowing port 6100 in Try stopping iptables or adding the correct rule iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT or the more permenant method vi /etc/sysconfig/iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT service iptables restart From: users-boun...@ovirt.orgmailto:users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Amador Pahim Sent: Wednesday, December 17, 2014 12:34 PM To: Dan Yasny; Yue, Cong Cc: users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] console viewer for ovrit engine On 12/17/2014 04:26 PM, Dan Yasny wrote: On Wed, Dec 17, 2014 at 2:22 PM, Yue, Cong cong_...@alliedtelesis.commailto:cong_...@alliedtelesis.com wrote: Hi I finally created VM and it seems work well. But for the administrator menu,but I can not show the browser-embeded console, noVNC and Spice HTML5 browser client. I am using firefox and chrome in Ubuntu 14.04 desktop OS. Is there any setting or requirements for the browser-embeded console viewer? html5 support is all you need iirc And install the CA cert on your browser. Also if I select other console options as native client, one .w file will be downloaded, what is the recommendation to open these .w files with some native viewer for Ubuntu 14.04 desktop? The file should be opened by virt-viewer (remote-viewer) Thanks, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users
Re: [ovirt-users] console viewer for ovrit engine
Thanks, but it saids there is no ovirt-websocket-proxy packges. I am using the repository of http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm Thanks, Cong -Original Message- From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 1:45 PM To: Yue, Cong; aw...@redhat.com; users@ovirt.org Cc: 'Amador Pahim'; 'Dan Yasny' Subject: RE: [ovirt-users] console viewer for ovrit engine that's because its not listening on 6100 yum install ovirt-websocket-proxy (optional net-tools) systemctl start ovirt-websocket-proxy -Original Message- From: Yue, Cong [mailto:cong_...@alliedtelesis.com] Sent: Wednesday, December 17, 2014 2:16 PM To: Donny Davis; aw...@redhat.com; users@ovirt.org Cc: 'Amador Pahim'; 'Dan Yasny' Subject: RE: [ovirt-users] console viewer for ovrit engine Thanks, but I can not get any log. As for I am using centos 7, I used the commands as ss |grep 6100 ip -s link |grep 6100 Is there any way to open console.vv with virt-viewer? Thanks, Cong -Original Message- From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 12:05 PM To: Yue, Cong; aw...@redhat.com; users@ovirt.org Cc: 'Amador Pahim'; 'Dan Yasny' Subject: RE: [ovirt-users] console viewer for ovrit engine netstat -tunlp |grep 6100 -Original Message- From: Yue, Cong [mailto:cong_...@alliedtelesis.com] Sent: Wednesday, December 17, 2014 12:56 PM To: Donny Davis; aw...@redhat.com; users@ovirt.org Cc: 'Amador Pahim'; 'Dan Yasny' Subject: RE: [ovirt-users] console viewer for ovrit engine I installed the cert as authorities from chrome advanced setting. But it still nothing message for Spice html5 client, and connection timeout for noVNC. By the way I also already add rule accept 6100 tcp port. Is there some log I can check ? Thanks, Cong -Original Message- From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 11:51 AM To: aw...@redhat.com; users@ovirt.org Cc: Yue, Cong; 'Amador Pahim'; 'Dan Yasny' Subject: RE: [ovirt-users] console viewer for ovrit engine he said he was using chrome, and chrome doesn't ask it downloads you then need to open the settings, and advanced... import to the trusted CA store -Original Message- From: Alexander Wels [mailto:aw...@redhat.com] Sent: Wednesday, December 17, 2014 12:47 PM To: users@ovirt.org Cc: Yue, Cong; Donny Davis; 'Amador Pahim'; 'Dan Yasny' Subject: Re: [ovirt-users] console viewer for ovrit engine On Wednesday, December 17, 2014 11:42:59 AM Yue, Cong wrote: Thanks for the reply. I am trying to install the ca.crt to my chrome. But during the installation, password is asked, I tried with the only password of my admin password, but it failed. Is there any other password for this? Thanks, Cong You need to import the certificate as an Authority, not as a regular certificate. Also check that it can sign other certificate, there should be 3 checkboxes if you import it in the right location. From: Donny Davis [mailto:do...@cloudspin.me] Sent: Wednesday, December 17, 2014 11:38 AM To: 'Amador Pahim'; 'Dan Yasny'; Yue, Cong Cc: users@ovirt.org Subject: RE: [ovirt-users] console viewer for ovrit engine Is it error 1006 in the novnc console, or connection timeout 1006 = you need to trust the CA connection timeout = you don't have a connection setup, or iptables is not allowing port 6100 in Try stopping iptables or adding the correct rule iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT or the more permenant method vi /etc/sysconfig/iptables -A INPUT -p tcp -m state --state NEW -m tcp --dport 6100 -j ACCEPT service iptables restart From: users-boun...@ovirt.orgmailto:users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] On Behalf Of Amador Pahim Sent: Wednesday, December 17, 2014 12:34 PM To: Dan Yasny; Yue, Cong Cc: users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] console viewer for ovrit engine On 12/17/2014 04:26 PM, Dan Yasny wrote: On Wed, Dec 17, 2014 at 2:22 PM, Yue, Cong cong_...@alliedtelesis.commailto:cong_...@alliedtelesis.com wrote: Hi I finally created VM and it seems work well. But for the administrator menu,but I can not show the browser-embeded console, noVNC and Spice HTML5 browser client. I am using firefox and chrome in Ubuntu 14.04 desktop OS. Is there any setting or requirements for the browser-embeded console viewer? html5 support is all you need iirc And install the CA cert on your browser. Also if I select other console options as native client, one .w file will be downloaded, what is the recommendation to open these .w files with some native viewer for Ubuntu 14.04 desktop? The file should be opened by virt-viewer (remote-viewer) Thanks, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review,
Re: [ovirt-users] Free Ovirt Powered Cloud
On Wed, Dec 17, 2014 at 09:19:03AM -0700, Donny Davis wrote: I will bring up a node in ipv6 only and see what libvirtd does. I will post my results. Thanks! We should at least map what's working and what does not. Just for the record, qemu's display can listen on all host addresses, or a single address (ovirt uses the latter), but in no case can it listen to one specific ipv4 address and another ipv6 address. Bug 1038963 - [RFE] qemu can't listen on both IPv6 and IPv4 localhost for VNC -Original Message- From: Dan Kenigsberg [mailto:dan...@redhat.com] Sent: Wednesday, December 17, 2014 2:53 AM To: Donny Davis Cc: 'Lior Vernia'; osvob...@redhat.com Subject: Re: [ovirt-users] Free Ovirt Powered Cloud On Tue, Dec 16, 2014 at 03:26:46PM -0700, Donny Davis wrote: I don't know if libvirt will listen on both ipv4 and ipv6 for incoming consoles?, but if it would I could ditch ipv4 all together, I wouldn't but it would enable ipv6 only customers to connect, and also I could get the direct console working I don't know if qemu/libvirt supports listening on 2 addresses. Too bad this conversion has fallen off the mailing list, where someone could have helped us with this question. Our best option is if you can try this out. Use Ondrej's hook too add an ipv6 address to a network, and see what libvirt does when a VM's display is attached to such a network. Please report your finding on-list! ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] nfs shared storage can not be mounted in second host during hosted-engine --deploy
I am trying to install the second host to test the HA for hypervisor . I am using external storage and assume that one is with HA. I configured the first node with that shared storage as nfs2-3:/engine. And now everything works well except for browser embedded console. :) But when I did hosted-engine -deploy for the second host, there is some error which shows -- Error while mounting specified storage path: mount.nfs: Connection timed out. Cannot unmounts /tmp/tmpLALdB1 -- I checked from the second with mount -t nfs nfs2-3:/engine /test_mount, and it works well. Do I need unblock something or is there some log I can dig further to find the problem? Thanks in advance, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] console viewer for ovrit engine
I checked but also it saids there is no such package. It works now with my native client. Some strange.. Thanks, Cong From: Gianluca Cecchi [mailto:gianluca.cec...@gmail.com] Sent: Wednesday, December 17, 2014 2:07 PM To: Yue, Cong Cc: Donny Davis; aw...@redhat.com; users@ovirt.org Subject: Re: [ovirt-users] console viewer for ovrit engine On Wed, Dec 17, 2014 at 10:58 PM, Yue, Cong cong_...@alliedtelesis.commailto:cong_...@alliedtelesis.com wrote: Thanks, but it saids there is no ovirt-websocket-proxy packges. I am using the repository of http://resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm Thanks, Cong The package, at least in 3.5 is ovirt-engine-websocket-proxy Gianluca This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] nfs shared storage can not be mounted in second host during hosted-engine --deploy
For this, I found the reason. My external storage is with nfs4 type, but I tired with nfs3. Thanks, Cong From: Yue, Cong Sent: Wednesday, December 17, 2014 3:56 PM To: 'users@ovirt.org' Subject: RE: nfs shared storage can not be mounted in second host during hosted-engine --deploy This is the log. Thanks, Cong From: Yue, Cong Sent: Wednesday, December 17, 2014 3:44 PM To: users@ovirt.orgmailto:users@ovirt.org Subject: nfs shared storage can not be mounted in second host during hosted-engine --deploy I am trying to install the second host to test the HA for hypervisor . I am using external storage and assume that one is with HA. I configured the first node with that shared storage as nfs2-3:/engine. And now everything works well except for browser embedded console. :) But when I did hosted-engine -deploy for the second host, there is some error which shows -- Error while mounting specified storage path: mount.nfs: Connection timed out. Cannot unmounts /tmp/tmpLALdB1 -- I checked from the second with mount -t nfs nfs2-3:/engine /test_mount, and it works well. Do I need unblock something or is there some log I can dig further to find the problem? Thanks in advance, Cong This e-mail message is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. If you are the intended recipient, please be advised that the content of this message is subject to access, review and disclosure by the sender's e-mail System Administrator. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Cannot activate storage domain
Have the following: 6 hosts - virt + Gluster shared Gluster volume is distributed-replicate - replica 2 Shutting down servers one at a time all work except for 1 brick. If we shut down one specific brick (1 brick per host) - we're unable to activate the storage domain. VM's that were actively running from other bricks continue to run. Whatever was running form that specific brick fails to run, gets paused etc. Error log shows the entry below. I'm not certain what it's saying is read only.nothing is read only that I can find. 2014-12-17 19:57:13,362 ERROR [org.ovirt.engine.core.vdsbroker.vdsbroker.SpmStatusVDSCommand] (DefaultQuartzScheduler_Worker-47) [4e9290a2] Command SpmStatusVDSCommand(HostName = U23.domainame.net, HostId = 0db58e46-68a3-4ba0-a8aa-094893c045a1, storagePoolId = 7ccd6ea9-7d80-4170-afa1-64c10c185aa6) execution failed. Exception: VDSErrorException: VDSGenericException: VDSErrorException: Failed to SpmStatusVDS, error = [Errno 30] Read-only file system, code = 100 2014-12-17 19:57:13,363 INFO [org.ovirt.engine.core.vdsbroker.irsbroker.IrsProxyData] (DefaultQuartzScheduler_Worker-47) [4e9290a2] hostFromVds::selectedVds - U23.domainname.net, spmStatus returned null! According to Ovirt/Gluster, if a brick goes down, the VM should be able to be restarted from another brick without issue. This does not appear to be the case. If we take other bricks offline, it appears to work as expected. Something with this specific brick cases everything to break which then makes any VM's that were running from the brick unable to start. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] [STORAGE] Adding posix compliant FS
Hi Julian, Please see my questions inline. Vered - Original Message - From: Julian De Marchi jul...@jdcomputers.com.au To: Vered Volansky ve...@redhat.com Cc: users@ovirt.org Sent: Wednesday, December 17, 2014 4:29:36 PM Subject: Re: [ovirt-users] [STORAGE] Adding posix compliant FS On 17/12/14 21:38, Vered Volansky wrote: Hi Julian, Hey Vered, IIUC the you have a self-created lvm, to which you're trying to connect as posix using ovirt. If that's the case please try to manually change the device's permissions to 36:36 under /dev/your_VG. If that doesn't work try the actual device it's mapped to (which is what vdsm actually tries to mount). If that also doesn't work please send us the output of: ls -lh /dev/your_VG . Still failed mate after a chmod 36:36. The thing is though, it _does_ mount the device for a moment before failing and unmounting it... Is this the same behaviour as before? [root@blade01 ~]# ls /dev/VolGroup/lv_images -lh lrwxrwxrwx 1 root root 7 Dec 15 16:52 /dev/VolGroup/lv_images - ../dm-2 I see /dev/VolGroup/lv_images are still root:root. Please chown 36:36 as well. Please state the all the chown you tried. [root@blade01 ~]# ls /dev/dm-2 -lh brw-rw 1 vdsm kvm 253, 2 Dec 15 16:52 /dev/dm-2 Regards, Vered - Original Message - From: Julian De Marchi jul...@jdcomputers.com.au To: users@ovirt.org Sent: Wednesday, December 17, 2014 3:35:34 AM Subject: Re: [ovirt-users] [STORAGE] Adding posix compliant FS Think I found some more clues. Thread-21910::DEBUG::2014-12-17 11:26:07,277::lvm::288::Storage.Misc.excCmd::(cmd) /usr/bin/sudo -n /sbin/lvm vgs --config ' devices { preferred_names = [^/dev/mapper/] ignore_suspended_devices=1 write_cache_state=0 disable_after_error_count=3 obtain_device_list_from_udev=0 filter = [ '\''r|.*|'\'' ] } global { locking_type=1 prioritise_write_locks=1 wait_for_locks=1 use_lvmetad=0 } backup { retain_min = 50 retain_days = 0 } ' --noheadings --units b --nosuffix --separator '|' --ignoreskippedcluster -o uuid,name,attr,size,free,extent_size,extent_count,free_count,tags,vg_mda_size,vg_mda_free,lv_count,pv_count,pv_name 3ba06bee-861e-4868-8e89-f29f785bab65 (cwd None) Thread-21910::DEBUG::2014-12-17 11:26:07,348::lvm::288::Storage.Misc.excCmd::(cmd) FAILED: err = ' Volume group 3ba06bee-861e-4868-8e89-f29f785bab65 not found\n Skipping volume group 3ba06bee-861e-4868-8e89-f29f785bab65\n'; rc = 5 Thread-21910::WARNING::2014-12-17 11:26:07,350::lvm::370::Storage.LVM::(_reloadvgs) lvm vgs failed: 5 [] [' Volume group 3ba06bee-861e-4868-8e89-f29f785bab65 not found', ' Skipping volume group 3ba06bee-861e-4868-8e89-f29f785bab65'] Thread-21910::DEBUG::2014-12-17 11:26:07,351::lvm::407::Storage.OperationMutex::(_reloadvgs) Operation 'lvm reload operation' released the operation mutex But I still don't understand what it's trying to do. Just to recap, I do see it create the dir and mount the device. But when it fails it umounts everything. I tried to manually create the DIR it is expecting, but ovirt seems to remove it and re-create it which then ends up with root:root. I can see this as when I add the storage I run watch ls -lh and can see it all occur. Any help would still be greatly appreciated! On 12/16/14 19:46, Julian De Marchi wrote: On 16/12/14 17:20, Aharon Canan wrote: Did you chown 36:36 the folder to get the right permissions for adding to ovirt? That's the thing. Ovirt actually creates that dir when I go and try to add the storage. It mounts the LVM device to that dir then fails. In the logs I posted at http://pastebin.com/fzN9ktAX you can see it is failing with a permission denied error. The command that is above the error is touch. I think it is trying to touch a file to ensure all is well and when that fails it gives the error. If I knew where in the code to prefix the touch command with sudo and add a line to the sudoers entry I can test this idea. [...] - Original Message - From: Julian De Marchi jul...@jdcomputers.com.au To: users@ovirt.org Sent: Tuesday, December 16, 2014 4:40:04 AM Subject: Re: [ovirt-users] [STORAGE] Adding posix compliant FS On 12/16/14 08:57, Julian De Marchi wrote: Heya-- I'm using ovirt 3.5 and trying to add a posix compliant FS to a node in my cluster. The storage I'm trying to add is contained within LVM. Below is a link to my log files on the node where I'm trying to attach the storage. http://pastebin.com/fzN9ktAX I've read the ovirt manual for adding posix compliant storage and believe I'm doing everything correct. Any help to get this storage added would be great thanks and if I forgot to include any info please ask. More info to add. I was doing an ls on the dir it does the mount in and saw the dir was owned by root:root with different perms to the ones mounted via
[ovirt-users] snapshot deletion problem
Hi, After a live VM storage movement process Ovirt has been created two snapshots. (I have two disks in vm) I have powered off and delete this snapshots. (It was long,long time) Before the process I had 830 GB of free spaces, but after deletion it hasn't freed up spaces, inversely, at this moment I have only 530 GB ! I checked the filesystem and I found, the VM disk images got an _MERGE versions. So it is duplicated. On the tasks remained two tasks. It is big problem for me because I have a lot of similara vm-s, and I don't have space enougth. I need to release this spaces . Also, the vm is working fine. How can I delete these extra files? Why doesn't delete the engine selfmade? Some info: [root@node2 c0e98725-bc7a-4066-98c8-a7a9bc054b06]# ls -al total 410061112 drwxr-xr-x. 2 vdsm kvm 8192 dec 17 20.04 . drwxr-xr-x. 28 vdsm kvm 8192 dec 16 21.01 .. -rw-rw. 2 vdsm kvm 214748364800 nov 29 20.48 b50f9e17-f44e-44e3-ab59-d9c9d8d6ac3d -rw-rw. 2 vdsm kvm 1048576 nov 29 19.31 b50f9e17-f44e-44e3-ab59-d9c9d8d6ac3d.lease -rw-r--r--. 2 vdsm kvm 264 nov 29 20.48 b50f9e17-f44e-44e3-ab59-d9c9d8d6ac3d.meta -rw-rw. 2 vdsm kvm 25146425344 dec 18 06.49 e71c2b62-261b-462a-813d-2dc362f32124 -rw-rw. 2 vdsm kvm 1048576 nov 29 19.31 e71c2b62-261b-462a-813d-2dc362f32124.lease -rw-rw. 2 vdsm kvm 214748364800 dec 18 07.28 e71c2b62-261b-462a-813d-2dc362f32124_MERGE -rw-rw. 2 vdsm kvm 1048576 dec 17 20.04 e71c2b62-261b-462a-813d-2dc362f32124_MERGE.lease -rw-r--r--. 2 vdsm kvm 260 dec 17 20.04 e71c2b62-261b-462a-813d-2dc362f32124_MERGE.meta -rw-r--r--. 2 vdsm kvm 260 nov 29 19.31 e71c2b62-261b-462a-813d-2dc362f32124.meta [root@node2 25035c1e-d71b-4083-9092-0f68f3e43028]# qemu-img info 7e5b3508-e8b1-440b-b456-9ce2b3c1de00 image: 7e5b3508-e8b1-440b-b456-9ce2b3c1de00 file format: raw virtual size: 160G (171798691840 bytes) disk size: 157G [root@node2 25035c1e-d71b-4083-9092-0f68f3e43028]# qemu-img info ef5b80e9-f6a3-405f-a668-10de3a18a781 image: ef5b80e9-f6a3-405f-a668-10de3a18a781 file format: qcow2 virtual size: 160G (171798691840 bytes) disk size: 1.1G cluster_size: 65536 backing file: ../25035c1e-d71b-4083-9092-0f68f3e43028/7e5b3508-e8b1-440b-b456-9ce2b3c1de00 backing file format: raw , Thanks in advance. Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] event monitoring
Hi, Thanks a lot! Have a nice day, Tibor - Eredeti üzenet - in the oVirt web-admin: select the 'Users' main tab - select the relevant user (typically the one with which you are logging into the oVirt web-admin) - select the 'Event Notifier' sub-tab - click on the 'Manage Events' button - within the 'Add Event Notification' dialog: select desired events and fill an e-mail address - click 'OK'. see http://i.imgur.com/8V3NQFu.png. as noted in the 'Add Event Notification' dialog: To receive email notifications, ensure that the mail server is configured and the ovirt-event-notifier service is running. Thanks, Einav - Original Message - From: Demeter Tibor tdeme...@itsmart.hu To: users@ovirt.org List users@ovirt.org Sent: Wednesday, December 17, 2014 3:18:19 PM Subject: [ovirt-users] event monitoring Hi, How can I get email notifications of ovirt events? Is there an official way? Thanks Tibor ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
[ovirt-users] Used Network resources of host XY [97%] exceeded
Hello List, one of my ovirt Guests seems to loose its Network connection. I can still see some traffic on the console tough. In the Logs i get: 2014-Dez-04, 13:09 Used Network resources of host myhostname-here [97%] exceeded defined threshold [95%]. Is this the reason? Where can i change or disable this feature? Thanks, Mario ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users