Re: [ovirt-users] Power Management config on Ovirt
Hi Renchu I am looking currently on he case and will respond later on today after investigating the logs. If I will not find anything, can I use the details for the host PM only for status command to try to debug and find the source of the problem ? Thanks Eli - Original Message - From: Renchu Mathew ren...@cracknell.com To: Martin Perina mper...@redhat.com Cc: users@ovirt.org, Eli Mesika emes...@redhat.com Sent: Sunday, January 25, 2015 6:50:00 AM Subject: RE: [ovirt-users] Power Management config on Ovirt Hi Martin, I got the below output when I run the command and it works from both the nodes. fence_ipmilan -a 192.168.1.114 -l admin -p admin -o status -v -P Getting status of IPMI:192.168.1.114...Spawning: '/usr/bin/ipmitool -I lanplus -H '192.168.1.114' -U 'admin' -P '[set]' -v chassis power status'... Chassis power = On Done Thanks Renchu Mathew | Sr. IT Administrator CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T +971 4 3445417 | F +971 4 3493675 | M +971 50 7386484 ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH EMAIL ren...@cracknell.com | WEB www.cracknell.com This email, its content and any files transmitted with it are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you are not the intended recipient please let us know by email reply and delete it from the system. Please note that any views or opinions presented in this email do not necessarily represent those of the company. Email transmissions cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The company therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission. -Original Message- From: Martin Perina [mailto:mper...@redhat.com] Sent: Thursday, January 22, 2015 6:12 PM To: Renchu Mathew Cc: users@ovirt.org; Eli Mesika Subject: Re: [ovirt-users] Power Management config on Ovirt - Original Message - From: Renchu Mathew ren...@cracknell.com To: Martin Perina mper...@redhat.com Cc: users@ovirt.org Sent: Thursday, January 22, 2015 2:39:43 PM Subject: RE: [ovirt-users] Power Management config on Ovirt Hi Martin, Yes. The vdsm host.log is from node-02. That's strange, I cannot find any call to fenceNode which should appear, if PM status is gathered. Eli, any idea? I have checked the link and it says we need to install the sever view management agent net-snmp on the hosts. Do we need to try this? How to install this on node? I used the below irmc admin user. Not, AFAIK this is needed only from Clustersuite, but not for oVirt. But could you please execute this command on node-20 just to confirm that Fujitsu Primergy is communicating through IPMI: fence_ipmilan -a IP -l USER -p PASS -o status -v -P where IP is IPMI address (from the log it should be 192.168.1.114) USER and PASS please set according to you setup. Thanks Martin [cid:image001.png@01D03669.DD48B4E0] Regards Renchu Mathew | Sr. IT Administrator CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T +971 4 3445417 | F +971 4 3493675 | M +971 50 7386484 ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH EMAIL ren...@cracknell.com | WEB www.cracknell.com This email, its content and any files transmitted with it are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you are not the intended recipient please let us know by email reply and delete it from the system. Please note that any views or opinions presented in this email do not necessarily represent those of the company. Email transmissions cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The company therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission. -Original Message- From: Martin Perina [mailto:mper...@redhat.com] Sent: Thursday, January 22, 2015 4:49 PM To: Renchu Mathew Cc: users@ovirt.org Subject: Re: [ovirt-users] Power Management config on Ovirt Hi, according to [1] Fujitsu iRMC should be accessible using IPMI. Now, I looked at logs, but I cannot see any fenceNode exection in vdsm.log. According to engine.log, host Node-02.cracknell.com was used as fence proxy. Are you sure that vdsm.log is from this host? Thanks Martin [1] https://www.redhat.com/archives/linux-cluster/2010-January/msg00056.ht ml - Original Message - From:
Re: [ovirt-users] Power Management config on Ovirt
Hi Eli, Please use any details. Thanks for your support. Regards Renchu Mathew -Original Message- From: Eli Mesika [mailto:emes...@redhat.com] Sent: Sunday, January 25, 2015 12:58 PM To: Renchu Mathew Cc: Martin Perina; users@ovirt.org Subject: Re: [ovirt-users] Power Management config on Ovirt Hi Renchu I am looking currently on he case and will respond later on today after investigating the logs. If I will not find anything, can I use the details for the host PM only for status command to try to debug and find the source of the problem ? Thanks Eli - Original Message - From: Renchu Mathew ren...@cracknell.com To: Martin Perina mper...@redhat.com Cc: users@ovirt.org, Eli Mesika emes...@redhat.com Sent: Sunday, January 25, 2015 6:50:00 AM Subject: RE: [ovirt-users] Power Management config on Ovirt Hi Martin, I got the below output when I run the command and it works from both the nodes. fence_ipmilan -a 192.168.1.114 -l admin -p admin -o status -v -P Getting status of IPMI:192.168.1.114...Spawning: '/usr/bin/ipmitool -I lanplus -H '192.168.1.114' -U 'admin' -P '[set]' -v chassis power status'... Chassis power = On Done Thanks Renchu Mathew | Sr. IT Administrator CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T +971 4 3445417 | F +971 4 3493675 | M +971 50 7386484 ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH EMAIL ren...@cracknell.com | WEB www.cracknell.com This email, its content and any files transmitted with it are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you are not the intended recipient please let us know by email reply and delete it from the system. Please note that any views or opinions presented in this email do not necessarily represent those of the company. Email transmissions cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The company therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission. -Original Message- From: Martin Perina [mailto:mper...@redhat.com] Sent: Thursday, January 22, 2015 6:12 PM To: Renchu Mathew Cc: users@ovirt.org; Eli Mesika Subject: Re: [ovirt-users] Power Management config on Ovirt - Original Message - From: Renchu Mathew ren...@cracknell.com To: Martin Perina mper...@redhat.com Cc: users@ovirt.org Sent: Thursday, January 22, 2015 2:39:43 PM Subject: RE: [ovirt-users] Power Management config on Ovirt Hi Martin, Yes. The vdsm host.log is from node-02. That's strange, I cannot find any call to fenceNode which should appear, if PM status is gathered. Eli, any idea? I have checked the link and it says we need to install the sever view management agent net-snmp on the hosts. Do we need to try this? How to install this on node? I used the below irmc admin user. Not, AFAIK this is needed only from Clustersuite, but not for oVirt. But could you please execute this command on node-20 just to confirm that Fujitsu Primergy is communicating through IPMI: fence_ipmilan -a IP -l USER -p PASS -o status -v -P where IP is IPMI address (from the log it should be 192.168.1.114) USER and PASS please set according to you setup. Thanks Martin [cid:image001.png@01D03669.DD48B4E0] Regards Renchu Mathew | Sr. IT Administrator CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T +971 4 3445417 | F +971 4 3493675 | M +971 50 7386484 ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH EMAIL ren...@cracknell.com | WEB www.cracknell.com This email, its content and any files transmitted with it are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you are not the intended recipient please let us know by email reply and delete it from the system. Please note that any views or opinions presented in this email do not necessarily represent those of the company. Email transmissions cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The company therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission. -Original Message- From: Martin Perina [mailto:mper...@redhat.com] Sent: Thursday, January 22, 2015 4:49 PM To: Renchu Mathew Cc: users@ovirt.org Subject: Re: [ovirt-users] Power Management config on Ovirt Hi, according to [1] Fujitsu iRMC should be accessible using IPMI. Now, I looked at logs, but I cannot see any
Re: [ovirt-users] VDSMD will not start after reboot
- Original Message - From: Andy farkey_2...@yahoo.com To: users@ovirt.org Sent: Sunday, January 25, 2015 12:26:55 AM Subject: [ovirt-users] VDSMD will not start after reboot Hello, I am new to the OVIRT users group and please bear with me if this question has already been answered or discussed. I am testing a two server install with the hosted engine. All servers are running CentOS 6.6 and I can get the servers up and running, added, etc on the initial install without issue. The problem arises when I reboot the servers, the ovrtmgmt network disappears thus starting the problem. Both Servers have two bonded interfaces (one for storage and one for mgmt/user traffic) and I manually create a bond0.100 interface prior to installing the hosted engine and select that interface on install. After a system reboot, and on both hosts the MGMT network disappears and VDSMd throws the error: Deploying hosted-engine using VLAN over a bonded interface is a configuration that is currently not supported, we have an RFE for 3.6.0 [1]. The problem you are reporting is similar to this one [2] and we are already working on it. In the mean time you can try to manually make VDSM persisting that network configuration as described here [3] cause the bonded interface was manually created. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1134346 [2] https://bugzilla.redhat.com/show_bug.cgi?id=1185032 [3] https://bugzilla.redhat.com/show_bug.cgi?id=1154399#c3 vdsm: Running restore_nets Traceback (most recent call last): File /usr/share/vdsm/vdsm-restore-net-config, line 137, in module restore() File /usr/share/vdsm/vdsm-restore-net-config, line 123, in restore unified_restoration() File /usr/share/vdsm/vdsm-restore-net-config, line 66, in unified_restoration persistentConfig.bonds) File /usr/share/vdsm/vdsm-restore-net-config, line 91, in _filter_nets_bonds bonds[bond]['nics'], net) KeyError: u'bond0' vdsm: stopped during execute restore_nets task (task returned with error code 1). vdsm start [FAILED] I have tried to manually create and let the OVIRT install create the VLAN'd MGMT network on the bonded interfaces. I have attached the engine setup, VDSM, and connectivity logs. Any help is much appreciated. Thanks Andy PS The OVIRT version is 3.5.1 CentOS is 6.6 (fully patched) The hosted engine is on an NFS share for testing which everything is resolvable and can connect. ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Power Management config on Ovirt
Hi Eli, I have 2 hypervisor host and both are installed with below iso file. Master data domain is glusterfs which is configured on another server. Is there any latest iso available? ovirt-node-iso-3.5.0.ovirt35.20140912.el6 (Edited). Please find below details. [cid:image001.png@01D038BF.FC58A040] Thanks Regards Renchu Mathew -Original Message- From: Eli Mesika [mailto:emes...@redhat.com] Sent: Sunday, January 25, 2015 4:46 PM To: Renchu Mathew Cc: Martin Perina; users@ovirt.org; Piotr Kliczewski Subject: Re: [ovirt-users] Power Management config on Ovirt - Original Message - From: Renchu Mathew ren...@cracknell.com To: Eli Mesika emes...@redhat.com Cc: Martin Perina mper...@redhat.com, users@ovirt.org Sent: Sunday, January 25, 2015 11:19:21 AM Subject: RE: [ovirt-users] Power Management config on Ovirt Hi Eli, Please use any details. Thanks for your support. Regards Renchu Mathew Hi again Looking in the logs I see that this is a issue we handled when we switched from XML RPC to JSON RPC protocol. Which vdsm is installed in the proxy host ? I am adding Piotr who is on charge of the JSON RPC protocol and who helped me in the past when I got a similar error on PM operations -Original Message- From: Eli Mesika [mailto:emes...@redhat.com] Sent: Sunday, January 25, 2015 12:58 PM To: Renchu Mathew Cc: Martin Perina; users@ovirt.org Subject: Re: [ovirt-users] Power Management config on Ovirt Hi Renchu I am looking currently on he case and will respond later on today after investigating the logs. If I will not find anything, can I use the details for the host PM only for status command to try to debug and find the source of the problem ? Thanks Eli - Original Message - From: Renchu Mathew ren...@cracknell.com To: Martin Perina mper...@redhat.com Cc: users@ovirt.org, Eli Mesika emes...@redhat.com Sent: Sunday, January 25, 2015 6:50:00 AM Subject: RE: [ovirt-users] Power Management config on Ovirt Hi Martin, I got the below output when I run the command and it works from both the nodes. fence_ipmilan -a 192.168.1.114 -l admin -p admin -o status -v -P Getting status of IPMI:192.168.1.114...Spawning: '/usr/bin/ipmitool -I lanplus -H '192.168.1.114' -U 'admin' -P '[set]' -v chassis power status'... Chassis power = On Done Thanks Renchu Mathew | Sr. IT Administrator CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T +971 4 3445417 | F +971 4 3493675 | M +971 50 7386484 ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH EMAIL ren...@cracknell.commailto:ren...@cracknell.com | WEB www.cracknell.comhttp://www.cracknell.com This email, its content and any files transmitted with it are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you are not the intended recipient please let us know by email reply and delete it from the system. Please note that any views or opinions presented in this email do not necessarily represent those of the company. Email transmissions cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The company therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission. -Original Message- From: Martin Perina [mailto:mper...@redhat.com] Sent: Thursday, January 22, 2015 6:12 PM To: Renchu Mathew Cc: users@ovirt.org; Eli Mesika Subject: Re: [ovirt-users] Power Management config on Ovirt - Original Message - From: Renchu Mathew ren...@cracknell.com To: Martin Perina mper...@redhat.com Cc: users@ovirt.org Sent: Thursday, January 22, 2015 2:39:43 PM Subject: RE: [ovirt-users] Power Management config on Ovirt Hi Martin, Yes. The vdsm host.log is from node-02. That's strange, I cannot find any call to fenceNode which should appear, if PM status is gathered. Eli, any idea? I have checked the link and it says we need to install the sever view management agent net-snmp on the hosts. Do we need to try this? How to install this on node? I used the below irmc admin user. Not, AFAIK this is needed only from Clustersuite, but not for oVirt. But could you please execute this command on node-20 just to confirm that Fujitsu Primergy is communicating through IPMI: fence_ipmilan -a IP -l USER -p PASS -o status -v -P where IP is IPMI address (from the log it should be 192.168.1.114) USER and PASS please set according to you setup. Thanks Martin
Re: [ovirt-users] Power Management config on Ovirt
On Sun, Jan 25, 2015 at 2:07 PM, Renchu Mathew ren...@cracknell.com wrote: Hi Eli, I have 2 hypervisor host and both are installed with below iso file. Master data domain is glusterfs which is configured on another server. Is there any latest iso available? ovirt-node-iso-3.5.0.ovirt35.20140912.el6 (Edited). @Eli - Do we know which vdsm version is in this iso? Please find below details. Thanks Regards Renchu Mathew -Original Message- From: Eli Mesika [mailto:emes...@redhat.com] Sent: Sunday, January 25, 2015 4:46 PM To: Renchu Mathew Cc: Martin Perina; users@ovirt.org; Piotr Kliczewski Subject: Re: [ovirt-users] Power Management config on Ovirt - Original Message - From: Renchu Mathew ren...@cracknell.com To: Eli Mesika emes...@redhat.com Cc: Martin Perina mper...@redhat.com, users@ovirt.org Sent: Sunday, January 25, 2015 11:19:21 AM Subject: RE: [ovirt-users] Power Management config on Ovirt Hi Eli, Please use any details. Thanks for your support. Regards Renchu Mathew Hi again Looking in the logs I see that this is a issue we handled when we switched from XML RPC to JSON RPC protocol. Which vdsm is installed in the proxy host ? I am adding Piotr who is on charge of the JSON RPC protocol and who helped me in the past when I got a similar error on PM operations It looks like marshaling issue but I am not sure whether it was already fixed or it is something new. I am not able to match a call when looking at engine.log. -Original Message- From: Eli Mesika [mailto:emes...@redhat.com] Sent: Sunday, January 25, 2015 12:58 PM To: Renchu Mathew Cc: Martin Perina; users@ovirt.org Subject: Re: [ovirt-users] Power Management config on Ovirt Hi Renchu I am looking currently on he case and will respond later on today after investigating the logs. If I will not find anything, can I use the details for the host PM only for status command to try to debug and find the source of the problem ? Thanks Eli - Original Message - From: Renchu Mathew ren...@cracknell.com To: Martin Perina mper...@redhat.com Cc: users@ovirt.org, Eli Mesika emes...@redhat.com Sent: Sunday, January 25, 2015 6:50:00 AM Subject: RE: [ovirt-users] Power Management config on Ovirt Hi Martin, I got the below output when I run the command and it works from both the nodes. fence_ipmilan -a 192.168.1.114 -l admin -p admin -o status -v -P Getting status of IPMI:192.168.1.114...Spawning: '/usr/bin/ipmitool -I lanplus -H '192.168.1.114' -U 'admin' -P '[set]' -v chassis power status'... Chassis power = On Done Thanks Renchu Mathew | Sr. IT Administrator CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T +971 4 3445417 | F +971 4 3493675 | M +971 50 7386484 ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH EMAIL ren...@cracknell.com | WEB www.cracknell.com This email, its content and any files transmitted with it are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you are not the intended recipient please let us know by email reply and delete it from the system. Please note that any views or opinions presented in this email do not necessarily represent those of the company. Email transmissions cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The company therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission. -Original Message- From: Martin Perina [mailto:mper...@redhat.com] Sent: Thursday, January 22, 2015 6:12 PM To: Renchu Mathew Cc: users@ovirt.org; Eli Mesika Subject: Re: [ovirt-users] Power Management config on Ovirt - Original Message - From: Renchu Mathew ren...@cracknell.com To: Martin Perina mper...@redhat.com Cc: users@ovirt.org Sent: Thursday, January 22, 2015 2:39:43 PM Subject: RE: [ovirt-users] Power Management config on Ovirt Hi Martin, Yes. The vdsm host.log is from node-02. That's strange, I cannot find any call to fenceNode which should appear, if PM status is gathered. Eli, any idea? I have checked the link and it says we need to install the sever view management agent net-snmp on the hosts. Do we need to try this? How to install this on node? I used the below irmc admin user. Not, AFAIK this is needed only from Clustersuite, but not for oVirt. But could you please execute this command on node-20 just to confirm that Fujitsu
Re: [ovirt-users] Power Management config on Ovirt
Hi Piotr, VDSM Version is vdsm-4.16.4-0.el6 Regards Renchu Mathew . From: Piotr Kliczewski [mailto:piotr.kliczew...@gmail.com] Sent: Sunday, January 25, 2015 6:08 PM To: Renchu Mathew Cc: Eli Mesika; Piotr Kliczewski; users@ovirt.org Subject: Re: [ovirt-users] Power Management config on Ovirt On Sun, Jan 25, 2015 at 2:07 PM, Renchu Mathew ren...@cracknell.commailto:ren...@cracknell.com wrote: Hi Eli, I have 2 hypervisor host and both are installed with below iso file. Master data domain is glusterfs which is configured on another server. Is there any latest iso available? ovirt-node-iso-3.5.0.ovirt35.20140912.el6 (Edited). @Eli - Do we know which vdsm version is in this iso? Please find below details. [cid:image001.png@01D0393F.9A5CF2D0] Thanks Regards Renchu Mathew -Original Message- From: Eli Mesika [mailto:emes...@redhat.commailto:emes...@redhat.com] Sent: Sunday, January 25, 2015 4:46 PM To: Renchu Mathew Cc: Martin Perina; users@ovirt.orgmailto:users@ovirt.org; Piotr Kliczewski Subject: Re: [ovirt-users] Power Management config on Ovirt - Original Message - From: Renchu Mathew ren...@cracknell.commailto:ren...@cracknell.com To: Eli Mesika emes...@redhat.commailto:emes...@redhat.com Cc: Martin Perina mper...@redhat.commailto:mper...@redhat.com, users@ovirt.orgmailto:users@ovirt.org Sent: Sunday, January 25, 2015 11:19:21 AM Subject: RE: [ovirt-users] Power Management config on Ovirt Hi Eli, Please use any details. Thanks for your support. Regards Renchu Mathew Hi again Looking in the logs I see that this is a issue we handled when we switched from XML RPC to JSON RPC protocol. Which vdsm is installed in the proxy host ? I am adding Piotr who is on charge of the JSON RPC protocol and who helped me in the past when I got a similar error on PM operations It looks like marshaling issue but I am not sure whether it was already fixed or it is something new. I am not able to match a call when looking at engine.log. -Original Message- From: Eli Mesika [mailto:emes...@redhat.commailto:emes...@redhat.com] Sent: Sunday, January 25, 2015 12:58 PM To: Renchu Mathew Cc: Martin Perina; users@ovirt.orgmailto:users@ovirt.org Subject: Re: [ovirt-users] Power Management config on Ovirt Hi Renchu I am looking currently on he case and will respond later on today after investigating the logs. If I will not find anything, can I use the details for the host PM only for status command to try to debug and find the source of the problem ? Thanks Eli - Original Message - From: Renchu Mathew ren...@cracknell.commailto:ren...@cracknell.com To: Martin Perina mper...@redhat.commailto:mper...@redhat.com Cc: users@ovirt.orgmailto:users@ovirt.org, Eli Mesika emes...@redhat.commailto:emes...@redhat.com Sent: Sunday, January 25, 2015 6:50:00 AM Subject: RE: [ovirt-users] Power Management config on Ovirt Hi Martin, I got the below output when I run the command and it works from both the nodes. fence_ipmilan -a 192.168.1.114 -l admin -p admin -o status -v -P Getting status of IPMI:192.168.1.114...Spawning: '/usr/bin/ipmitool -I lanplus -H '192.168.1.114' -U 'admin' -P '[set]' -v chassis power status'... Chassis power = On Done Thanks Renchu Mathew | Sr. IT Administrator CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T +971 4 3445417 | F +971 4 3493675tel:%2B971%204%203493675 | M +971 50 7386484tel:%2B971%2050%207386484 ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH EMAIL ren...@cracknell.commailto:ren...@cracknell.com | WEB www.cracknell.comhttp://www.cracknell.com This email, its content and any files transmitted with it are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you are not the intended recipient please let us know by email reply and delete it from the system. Please note that any views or opinions presented in this email do not necessarily represent those of the company. Email transmissions cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The company therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission. -Original Message- From: Martin Perina [mailto:mper...@redhat.commailto:mper...@redhat.com] Sent: Thursday, January 22, 2015 6:12 PM To: Renchu Mathew Cc: users@ovirt.orgmailto:users@ovirt.org; Eli Mesika Subject: Re: [ovirt-users] Power Management config on Ovirt - Original Message - From: Renchu Mathew ren...@cracknell.commailto:ren...@cracknell.com To: Martin Perina
Re: [ovirt-users] iso uploader times out
Mikola, What version are you running? A bug in 3.5.0 caused the same behavior, it's fixed in 3.5.1. On Mon, Jan 26, 2015 at 4:36 AM, Mikola Rose mr...@power-soft.com wrote: Hi list members, Just finished deploying a self hosted engine. But i am having a problem uploading an iso. It seems to be timing out.. engine-iso-uploader -i iso upload rhel-server-6.6-x86_64-dvd.iso Please provide the REST API password for the admin@internal oVirt Engine user (CTRL+D to abort): Uploading, please wait... ERROR: mount.nfs: Connection timed out I am a little confused as the host machine has access to the NFS shares but the engine vm does not yet I have created an iso storage item successfully so the engine can see the nfs share? Any idea on how I can trouble shoot this? ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users -- Met vriendelijke groeten / With kind regards, Johan Kooijman ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
Re: [ovirt-users] Power Management config on Ovirt
- Original Message - From: Renchu Mathew ren...@cracknell.com To: Eli Mesika emes...@redhat.com Cc: Martin Perina mper...@redhat.com, users@ovirt.org Sent: Sunday, January 25, 2015 11:19:21 AM Subject: RE: [ovirt-users] Power Management config on Ovirt Hi Eli, Please use any details. Thanks for your support. Regards Renchu Mathew Hi again Looking in the logs I see that this is a issue we handled when we switched from XML RPC to JSON RPC protocol. Which vdsm is installed in the proxy host ? I am adding Piotr who is on charge of the JSON RPC protocol and who helped me in the past when I got a similar error on PM operations -Original Message- From: Eli Mesika [mailto:emes...@redhat.com] Sent: Sunday, January 25, 2015 12:58 PM To: Renchu Mathew Cc: Martin Perina; users@ovirt.org Subject: Re: [ovirt-users] Power Management config on Ovirt Hi Renchu I am looking currently on he case and will respond later on today after investigating the logs. If I will not find anything, can I use the details for the host PM only for status command to try to debug and find the source of the problem ? Thanks Eli - Original Message - From: Renchu Mathew ren...@cracknell.com To: Martin Perina mper...@redhat.com Cc: users@ovirt.org, Eli Mesika emes...@redhat.com Sent: Sunday, January 25, 2015 6:50:00 AM Subject: RE: [ovirt-users] Power Management config on Ovirt Hi Martin, I got the below output when I run the command and it works from both the nodes. fence_ipmilan -a 192.168.1.114 -l admin -p admin -o status -v -P Getting status of IPMI:192.168.1.114...Spawning: '/usr/bin/ipmitool -I lanplus -H '192.168.1.114' -U 'admin' -P '[set]' -v chassis power status'... Chassis power = On Done Thanks Renchu Mathew | Sr. IT Administrator CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T +971 4 3445417 | F +971 4 3493675 | M +971 50 7386484 ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH EMAIL ren...@cracknell.com | WEB www.cracknell.com This email, its content and any files transmitted with it are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you are not the intended recipient please let us know by email reply and delete it from the system. Please note that any views or opinions presented in this email do not necessarily represent those of the company. Email transmissions cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The company therefore does not accept liability for any errors or omissions in the contents of this message which arise as a result of email transmission. -Original Message- From: Martin Perina [mailto:mper...@redhat.com] Sent: Thursday, January 22, 2015 6:12 PM To: Renchu Mathew Cc: users@ovirt.org; Eli Mesika Subject: Re: [ovirt-users] Power Management config on Ovirt - Original Message - From: Renchu Mathew ren...@cracknell.com To: Martin Perina mper...@redhat.com Cc: users@ovirt.org Sent: Thursday, January 22, 2015 2:39:43 PM Subject: RE: [ovirt-users] Power Management config on Ovirt Hi Martin, Yes. The vdsm host.log is from node-02. That's strange, I cannot find any call to fenceNode which should appear, if PM status is gathered. Eli, any idea? I have checked the link and it says we need to install the sever view management agent net-snmp on the hosts. Do we need to try this? How to install this on node? I used the below irmc admin user. Not, AFAIK this is needed only from Clustersuite, but not for oVirt. But could you please execute this command on node-20 just to confirm that Fujitsu Primergy is communicating through IPMI: fence_ipmilan -a IP -l USER -p PASS -o status -v -P where IP is IPMI address (from the log it should be 192.168.1.114) USER and PASS please set according to you setup. Thanks Martin [cid:image001.png@01D03669.DD48B4E0] Regards Renchu Mathew | Sr. IT Administrator CRACKNELL DUBAI | P.O. Box 66231 | United Arab Emirates | T +971 4 3445417 | F +971 4 3493675 | M +971 50 7386484 ABU DHABI | DUBAI | LONDON | MUSCAT | DOHA | JEDDAH EMAIL ren...@cracknell.com | WEB www.cracknell.com This email, its content and any files transmitted with it are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you are not the intended recipient please let us know by email reply and delete it from the system. Please note that any views or opinions presented in this email do not necessarily represent those of the company. Email transmissions
[ovirt-users] Loopback interface has huge network transctions
Hi, I have noticed that the loop back interface has huge network packets sent and received...is it common or need to some tweaks 1. Ovirt 3.5.1 2. Before ovirt engine installation...loop back address doesn't has that huge amount of packets sent/receive 3. After Ovirt engine install it's keep increasing.and in just 48 hours it reach to 35 GB... [root@ccr01 ~]# ifconfig eth0: flags=4163UP,BROADCAST,RUNNING,MULTICAST mtu 1500 inet 43.252.x.x netmask 255.255.255.0 broadcast 43.252.x.x ether 60:eb:69:82:0b:4c txqueuelen 1000 (Ethernet) RX packets 6605350 bytes 6551029484 (6.1 GiB) RX errors 0 dropped 120622 overruns 0 frame 0 TX packets 2155524 bytes 431348174 (411.3 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device memory 0xdf6e-df70 eth1: flags=4163UP,BROADCAST,RUNNING,MULTICAST mtu 1500 inet 10.10.0.2 netmask 255.255.255.0 broadcast 10.10.0.255 ether 60:eb:69:82:0b:4d txqueuelen 1000 (Ethernet) RX packets 788160 bytes 133915292 (127.7 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 546352 bytes 131672255 (125.5 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 device memory 0xdf66-df68 lo: flags=73UP,LOOPBACK,RUNNING mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 loop txqueuelen 0 (Local Loopback) RX packets 84747311 bytes 40376482560 (37.6 GiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 84747311 bytes 40376482560 (37.6 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 [root@ccr01 ~]# w 09:23:07 up 2 days, 11:43, 1 user, load average: 0.27, 0.30, 0.31 USER TTYLOGIN@ IDLE JCPU PCPU WHAT root pts/0 09:163.00s 0.01s 0.00s w [root@ccr01 ~]# Thanks, Punit ___ Users mailing list Users@ovirt.org http://lists.ovirt.org/mailman/listinfo/users
