Re: [ovirt-users] CentOS 7.1 and virt-v2v

[Shahar Havivi]

Adding Adam and Martin,
Can you please look why mom fails?

 Shahar.

On 07.12.15 14:10, CLSA Mcmaster wrote:
> On Mon, Dec 7, 2015 at 1:37 PM, Shahar Havivi  wrote:
> 
> > On 07.12.15 13:34, CLSA Mcmaster wrote:
> > > On Mon, Dec 7, 2015 at 1:26 PM, Shahar Havivi 
> > wrote:
> > >
> > > > On 07.12.15 13:15, CLSA Mcmaster wrote:
> > > > > On Mon, Dec 7, 2015 at 1:03 PM, Shahar Havivi 
> > > > wrote:
> > > > >
> > > > > > On 07.12.15 11:19, CLSA Mcmaster wrote:
> > > > > > > Greetings
> > > > > > >
> > > > > > > I am new to both CentOS and oVirt. I have been hoping to migrate
> > some
> > > > > > > virtual machines from VMware to oVirt and I have hit a wall.
> > > > > > >
> > > > > > > CentOS 7.1 does not include the tool virt-v2v with the
> > > > libguestfs-tools
> > > > > > > package. I have enabled the CR repository and upgraded but no
> > luck. I
> > > > > > have
> > > > > > > attempted to compile but the dependency whack-a-mole process
> > wore me
> > > > down
> > > > > > > and I eventually hot another wall with supermin not being "new
> > > > enough". I
> > > > > > > tried to compile that and ran into more dependency issues.
> > > > > > Hi Sean,
> > > > > > For virt-v2v compilation issue you can ask at
> > libgues...@redhat.com
> > > > > > mailing
> > > > > > list.
> > > > > > >
> > > > > > > Frankly, I am at the point of throwing in the towel but I'm
> > hoping
> > > > > > someone
> > > > > > > can offer advise or insight on obtaining the tool through other
> > > > means. I
> > > > > > > would also be open to importing guests through another method.
> > For
> > > > > > example,
> > > > > > > the oVirt interface has a utility to import OVA files. Is that
> > VMware
> > > > > > > created OVA files? The dialogue has host and path. Is the path
> > to be
> > > > on
> > > > > > the
> > > > > > > host or the engine? Can it be any path?
> > > > > > Upstream ovirt git://gerrit.ovirt.org/ovirt-engine have support
> > for
> > > > > > importing
> > > > > > OVA files that was exported from vShpere 5.5 and 6.0 as well as
> > > > connecting
> > > > > > to
> > > > > > a running esxi listing and importing the VMs that are in down
> > state.
> > > > > >
> > > > > > The OVA file must be accessed by the importing host with
> > permissions
> > > > > > 36:36(NFS
> > > > > > mount will work as well).
> > > > > >
> > > > > > To access the import VMs feature simply go to the VMs tab and
> > click on
> > > > the
> > > > > > import button there you will be able to select the import source
> > > > > > (VMware/OVA
> > > > > > etc).
> > > > > >
> > > > > > More information about virt-v2v integration with oVirt can be
> > found in
> > > > its
> > > > > > feature page: http://www.ovirt.org/Features/virt-v2v_Integration
> > > > > >
> > > > > >  Shahar.
> > > > > > >
> > > > > > > Thank you in advance for any support offered.
> > > > > > >
> > > > > > > Sean.
> > > > > >
> > > > > > > ___
> > > > > > > Users mailing list
> > > > > > > Users@ovirt.org
> > > > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > > > >
> > > > > >
> > > > > Thank you. Shahar.
> > > > >
> > > > > I did get an OVA imported. Unfortunately, immediately upon doing so
> > I got
> > > > > this error: "Unit mom-vdsm.service has failed".
> > > > Can you add the vdsm log, its in /var/log/vdsm/vdsm.log
> > > > >
> > > > > Sean.
> > > >
> > > > > ___
> > > > > Users mailing list
> > > > > Users@ovirt.org
> > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > >
> > > >
> > > I shut down the host. I will restart it. But on the engine side in
> > > engine.log I see:
> > Ok,
> > try to see if you can update the mom* packages on the host and also what
> > version of vdsm and mom are you using?
> > vdsm log can be helpful.
> >
> >   Shahar.
> > >
> > > Caused by: org.postgresql.util.PSQLException: ERROR: integer out of range
> > >   Where: PL/pgSQL function fn_get_disk_commited_value_by_storage(uuid)
> > line
> > > 20 at assignment
> > > PL/pgSQL function getstorage_domains_by_storagepoolid(uuid,uuid,boolean)
> > > line 3 at RETURN QUERY
> > > at
> > >
> > org.postgresql.core.v3.QueryExecutorImpl.receiveErrorResponse(QueryExecutorImpl.java:2103)
> > > at
> > >
> > org.postgresql.core.v3.QueryExecutorImpl.processResults(QueryExecutorImpl.java:1836)
> > > at
> > >
> > org.postgresql.core.v3.QueryExecutorImpl.execute(QueryExecutorImpl.java:257)
> > > at
> > >
> > org.postgresql.jdbc2.AbstractJdbc2Statement.execute(AbstractJdbc2Statement.java:512)
> > > at
> > >
> > org.postgresql.jdbc2.AbstractJdbc2Statement.executeWithFlags(AbstractJdbc2Statement.java:388)
> > > at
> > >
> > org.postgresql.jdbc2.AbstractJdbc2Statement.executeQuery(AbstractJdbc2Statement.java:273)
> > > at
> > >
> > org.jboss.jca.adapters.jdbc.CachedPreparedStatement.executeQuery(CachedPreparedStatement.java:111)
> > >

Re: [ovirt-users] Ovirt Engine Issue

[Melissa Mesler]

Here is what I retrieved from the postresql logs:

LOG:  database system was interrupted; last known up at 2015-12-04 
10:57:43 CST
LOG:  unexpected pageaddr 0/69564000 in log file 0, segment 107, offset 
5652480

LOG:  invalid primary checkpoint record
LOG:  unexpected pageaddr 0/6952A000 in log file 0, segment 107, offset 
5414912

LOG:  invalid secondary checkpoint record
PANIC:  could not locate a valid checkpoint record
LOG:  startup process (PID 1637) was terminated by signal 6: Aborted
LOG:  aborting startup due to startup process failure
LOG:  database system was interrupted; last known up at 2015-12-04 
10:57:43 CST
LOG:  unexpected pageaddr 0/69564000 in log file 0, segment 107, offset 
5652480

LOG:  invalid primary checkpoint record
LOG:  unexpected pageaddr 0/6952A000 in log file 0, segment 107, offset 
5414912

LOG:  invalid secondary checkpoint record
PANIC:  could not locate a valid checkpoint record
LOG:  startup process (PID 2632) was terminated by signal 6: Aborted
LOG:  aborting startup due to startup process failure

Also, when I did the sync on the ovirt vm it was powered off. I know not 
to do live syncs as there could be issues. That's why I'm so confused 
that there's a pr oblem.



On 12/7/15 1:03 AM, Yedidyah Bar David wrote:

On Mon, Dec 7, 2015 at 12:09 AM, Melissa Mesler  wrote:

Hopefully someone can give me a good idea of how to troubleshoot an ovirt
issue. I am running 3.5 on CentOS 6.7. Here is the issue I'm having. I have
Ovirt running as a virtual machine in KVM. I recently moved (with virtsync)
the vm to rebuild the host. Once the host was rebuilt I moved ovirt back.
Now ovirt-engine starts but is inaccessible. In the logs it says this:

2015-12-06 15:57:24,558 ERROR [org.ovirt.engine.core.bll.Backend] (MSC
service thread 1-2) Error in getting DB connection. The database is
inaccessible. Original exception is: DataAccessResourceFailureException:
Error retreiving database metadata; nested exception is
org.springframework.jdbc.support.MetaDataAccessException: Could not get
Connection for extracting meta data; nested exception is
org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get
JDBC Connection; nested exception is java.sql.SQLException:
javax.resource.ResourceException: IJ000453: Unable to get managed connection
for java:/ENGINEDataSource

I did notice that I can't get postgresql to start.

What happens when you try? Check/post also pg logs please, from
/var/lib/pgsql/data/pg_log/ .


Everything worked
perfectly fine before. Any ideas?

Was the copy done from a live machine? From a snapshot? Perhaps it wasn't
consistent? Need to check pg logs.

Best,


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] Postgresql failure (was: Ovirt Engine Issue)

[Yedidyah Bar David]

On Mon, Dec 7, 2015 at 4:00 PM, Melissa Mesler  wrote:
> Here is what I retrieved from the postresql logs:
>
> LOG:  database system was interrupted; last known up at 2015-12-04 10:57:43
> CST
> LOG:  unexpected pageaddr 0/69564000 in log file 0, segment 107, offset
> 5652480
> LOG:  invalid primary checkpoint record
> LOG:  unexpected pageaddr 0/6952A000 in log file 0, segment 107, offset
> 5414912
> LOG:  invalid secondary checkpoint record
> PANIC:  could not locate a valid checkpoint record
> LOG:  startup process (PID 1637) was terminated by signal 6: Aborted
> LOG:  aborting startup due to startup process failure
> LOG:  database system was interrupted; last known up at 2015-12-04 10:57:43
> CST
> LOG:  unexpected pageaddr 0/69564000 in log file 0, segment 107, offset
> 5652480
> LOG:  invalid primary checkpoint record
> LOG:  unexpected pageaddr 0/6952A000 in log file 0, segment 107, offset
> 5414912
> LOG:  invalid secondary checkpoint record
> PANIC:  could not locate a valid checkpoint record
> LOG:  startup process (PID 2632) was terminated by signal 6: Aborted
> LOG:  aborting startup due to startup process failure
>
> Also, when I did the sync on the ovirt vm it was powered off. I know not to
> do live syncs as there could be issues. That's why I'm so confused that
> there's a pr oblem.

No idea, adding Eli and changing subject.

Best,

>
>
>
> On 12/7/15 1:03 AM, Yedidyah Bar David wrote:
>
> On Mon, Dec 7, 2015 at 12:09 AM, Melissa Mesler  wrote:
>
> Hopefully someone can give me a good idea of how to troubleshoot an ovirt
> issue. I am running 3.5 on CentOS 6.7. Here is the issue I'm having. I have
> Ovirt running as a virtual machine in KVM. I recently moved (with virtsync)
> the vm to rebuild the host. Once the host was rebuilt I moved ovirt back.
> Now ovirt-engine starts but is inaccessible. In the logs it says this:
>
> 2015-12-06 15:57:24,558 ERROR [org.ovirt.engine.core.bll.Backend] (MSC
> service thread 1-2) Error in getting DB connection. The database is
> inaccessible. Original exception is: DataAccessResourceFailureException:
> Error retreiving database metadata; nested exception is
> org.springframework.jdbc.support.MetaDataAccessException: Could not get
> Connection for extracting meta data; nested exception is
> org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get
> JDBC Connection; nested exception is java.sql.SQLException:
> javax.resource.ResourceException: IJ000453: Unable to get managed connection
> for java:/ENGINEDataSource
>
> I did notice that I can't get postgresql to start.
>
> What happens when you try? Check/post also pg logs please, from
> /var/lib/pgsql/data/pg_log/ .
>
> Everything worked
> perfectly fine before. Any ideas?
>
> Was the copy done from a live machine? From a snapshot? Perhaps it wasn't
> consistent? Need to check pg logs.
>
> Best,
>
>



-- 
Didi
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Storage over allocation ratio value larger than 125% will pause vms

[Grundmann, Christian]

Hi,
I have the same problem with thin provisioned VMs (or VMs with snapshot)
It got a lot better (but not fixed) using this guide 
https://access.redhat.com/solutions/130843 to adjust the tunables

Maybe it helps
Christian

Von: users-boun...@ovirt.org [mailto:users-boun...@ovirt.org] Im Auftrag von 
Yaniv Kaul
Gesendet: Montag, 07. Dezember 2015 15:49
An: Jan Bernard Wevers 
Cc: users@ovirt.org
Betreff: Re: [ovirt-users] Storage over allocation ratio value larger than 125% 
will pause vms

On Mon, Dec 7, 2015 at 12:38 AM, Jan Bernard Wevers 
> 
wrote:
I’m using ovirt 3.6 and an iscsi storage domain. Almost all vms are using
thin provisioning with a virtual size of 40GB and a typical physical size of
8 GB.
Now I’m facing the fact that ovirt is pausing my vms due to the following
event message:
(Example):  “VM vm_01_16_centos6 has been paused due to no Storage space
error.”

oVirt is not pausing VMs. QEMU/KVM does, when it gets a storage error (in order 
to prevent possible corruption).
Can you please attach VDSM logs from the relevant host where this is happening?
TIA,
Y.


When I look at the iscsi storage domain the over allocation ratio value is
about 127%, but of the 2799GB there is still more than 1500GB available.
My questions:
- Why ovirt is pausing the vms?
- Can I enlarge the over allocation ratio before ovirt is complaining about
storage space?


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Storage over allocation ratio value larger than 125% will pause vms

[Yaniv Kaul]

On Mon, Dec 7, 2015 at 12:38 AM, Jan Bernard Wevers <
jan.bernard.wev...@group2000.com> wrote:

> I’m using ovirt 3.6 and an iscsi storage domain. Almost all vms are using
> thin provisioning with a virtual size of 40GB and a typical physical size
> of
> 8 GB.
> Now I’m facing the fact that ovirt is pausing my vms due to the following
> event message:
> (Example):  “VM vm_01_16_centos6 has been paused due to no Storage space
> error.”
>

oVirt is not pausing VMs. QEMU/KVM does, when it gets a storage error (in
order to prevent possible corruption).
Can you please attach VDSM logs from the relevant host where this is
happening?
TIA,
Y.


>
> When I look at the iscsi storage domain the over allocation ratio value is
> about 127%, but of the 2799GB there is still more than 1500GB available.
> My questions:
> - Why ovirt is pausing the vms?
> - Can I enlarge the over allocation ratio before ovirt is complaining about
> storage space?
>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Postgresql failure (was: Ovirt Engine Issue)

[Eli Mesika]

- Original Message -
> From: "Yedidyah Bar David" 
> To: "Melissa Mesler" , "Eli Mesika" 
> Cc: users@ovirt.org
> Sent: Monday, December 7, 2015 4:14:49 PM
> Subject: Postgresql failure (was: [ovirt-users] Ovirt Engine Issue)
> 
> On Mon, Dec 7, 2015 at 4:00 PM, Melissa Mesler  wrote:
> > Here is what I retrieved from the postresql logs:
> >
> > LOG:  database system was interrupted; last known up at 2015-12-04 10:57:43
> > CST
> > LOG:  unexpected pageaddr 0/69564000 in log file 0, segment 107, offset
> > 5652480
> > LOG:  invalid primary checkpoint record
> > LOG:  unexpected pageaddr 0/6952A000 in log file 0, segment 107, offset
> > 5414912
> > LOG:  invalid secondary checkpoint record
> > PANIC:  could not locate a valid checkpoint record
> > LOG:  startup process (PID 1637) was terminated by signal 6: Aborted
> > LOG:  aborting startup due to startup process failure
> > LOG:  database system was interrupted; last known up at 2015-12-04 10:57:43
> > CST
> > LOG:  unexpected pageaddr 0/69564000 in log file 0, segment 107, offset
> > 5652480
> > LOG:  invalid primary checkpoint record
> > LOG:  unexpected pageaddr 0/6952A000 in log file 0, segment 107, offset
> > 5414912
> > LOG:  invalid secondary checkpoint record
> > PANIC:  could not locate a valid checkpoint record
> > LOG:  startup process (PID 2632) was terminated by signal 6: Aborted
> > LOG:  aborting startup due to startup process failure
> >
> > Also, when I did the sync on the ovirt vm it was powered off. I know not to
> > do live syncs as there could be issues. That's why I'm so confused that
> > there's a pr oblem.
> 
> No idea, adding Eli and changing subject.

Seems as database is corrupted 
This is a serious issue that someone with DBA knowledge should handle 
http://blog.endpoint.com/2014/11/when-postgres-will-not-start.html
Remember to do a physical copy of your database file to a different partition 
or server before you start 

Eli

> 
> Best,
> 
> >
> >
> >
> > On 12/7/15 1:03 AM, Yedidyah Bar David wrote:
> >
> > On Mon, Dec 7, 2015 at 12:09 AM, Melissa Mesler 
> > wrote:
> >
> > Hopefully someone can give me a good idea of how to troubleshoot an ovirt
> > issue. I am running 3.5 on CentOS 6.7. Here is the issue I'm having. I have
> > Ovirt running as a virtual machine in KVM. I recently moved (with virtsync)
> > the vm to rebuild the host. Once the host was rebuilt I moved ovirt back.
> > Now ovirt-engine starts but is inaccessible. In the logs it says this:
> >
> > 2015-12-06 15:57:24,558 ERROR [org.ovirt.engine.core.bll.Backend] (MSC
> > service thread 1-2) Error in getting DB connection. The database is
> > inaccessible. Original exception is: DataAccessResourceFailureException:
> > Error retreiving database metadata; nested exception is
> > org.springframework.jdbc.support.MetaDataAccessException: Could not get
> > Connection for extracting meta data; nested exception is
> > org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get
> > JDBC Connection; nested exception is java.sql.SQLException:
> > javax.resource.ResourceException: IJ000453: Unable to get managed
> > connection
> > for java:/ENGINEDataSource
> >
> > I did notice that I can't get postgresql to start.
> >
> > What happens when you try? Check/post also pg logs please, from
> > /var/lib/pgsql/data/pg_log/ .
> >
> > Everything worked
> > perfectly fine before. Any ideas?
> >
> > Was the copy done from a live machine? From a snapshot? Perhaps it wasn't
> > consistent? Need to check pg logs.
> >
> > Best,
> >
> >
> 
> 
> 
> --
> Didi
> 
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Server dont work after Host setting

[Yedidyah Bar David]

On Mon, Dec 7, 2015 at 11:05 AM, Taste-Of-IT  wrote:
> Am 2015-12-07 08:06, schrieb Yedidyah Bar David:
>>
>> On Mon, Dec 7, 2015 at 12:38 AM, Taste-Of-IT 
>> wrote:
>>>
>>> Hello,
>>> i am new with ovirt and i installed ovirt engine 3.6 on centos 7. After
>>> first login i create the host with fqdn of ovirt server but without
>>> powersavesettings. Firt i saw installing as status for host, but after a
>>> while nothing happend, I reboot the server. In engine.log i see "VMs
>>> initialization finished for Host", but i cant open the webgui. What can i
>>> do? Where can i look to find the error and what have i done wrong?
>>
>>
>> If host-deploy managed to finish, you can see its log in [1]. Otherwise
>> please try to (re)install the host.
>>
>> [1] /var/log/ovirt-engine/host-deploy/
>>
>> Best,
>
>
> Hi Didi,
> ok i will have a closer look into the log. Actuall the WebGUI doesnt load,
> services are up and running. How can i reinstall the host? Via cli? Or do
> you mean the hostsystem with installed ovirt engine? thx

Not sure I follow.

The engine runs on some machine, let's call it "the engine machine".
If it's a self-hosted-engine, it's running inside a VM managed by itself.
Otherwise it's running elsewhere (on some physical machine, or some other
VM).

A "Host", in ovirt terminology, is where VMs run.

Now please describe what you did, what you now try to do that doesn't
work, and what you can find in logs that might be related.

If you can't access the web admin ui, that's a completely different
problem than if you can't add a host to the engine.

Best,
-- 
Didi
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Server dont work after Host setting

[Taste-Of-IT]

Am 2015-12-07 08:06, schrieb Yedidyah Bar David:
On Mon, Dec 7, 2015 at 12:38 AM, Taste-Of-IT  
wrote:

Hello,
i am new with ovirt and i installed ovirt engine 3.6 on centos 7. 
After

first login i create the host with fqdn of ovirt server but without
powersavesettings. Firt i saw installing as status for host, but after 
a

while nothing happend, I reboot the server. In engine.log i see "VMs
initialization finished for Host", but i cant open the webgui. What 
can i

do? Where can i look to find the error and what have i done wrong?


If host-deploy managed to finish, you can see its log in [1]. Otherwise
please try to (re)install the host.

[1] /var/log/ovirt-engine/host-deploy/

Best,


Hi Didi,
ok i will have a closer look into the log. Actuall the WebGUI doesnt 
load, services are up and running. How can i reinstall the host? Via 
cli? Or do you mean the hostsystem with installed ovirt engine? thx


___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Server dont work after Host setting

[Taste-Of-IT]

Am 2015-12-07 10:21, schrieb Yedidyah Bar David:
On Mon, Dec 7, 2015 at 11:05 AM, Taste-Of-IT  
wrote:

Am 2015-12-07 08:06, schrieb Yedidyah Bar David:


On Mon, Dec 7, 2015 at 12:38 AM, Taste-Of-IT 
wrote:


Hello,
i am new with ovirt and i installed ovirt engine 3.6 on centos 7. 
After

first login i create the host with fqdn of ovirt server but without
powersavesettings. Firt i saw installing as status for host, but 
after a

while nothing happend, I reboot the server. In engine.log i see "VMs
initialization finished for Host", but i cant open the webgui. What 
can i

do? Where can i look to find the error and what have i done wrong?



If host-deploy managed to finish, you can see its log in [1]. 
Otherwise

please try to (re)install the host.

[1] /var/log/ovirt-engine/host-deploy/

Best,



Hi Didi,
ok i will have a closer look into the log. Actuall the WebGUI doesnt 
load,
services are up and running. How can i reinstall the host? Via cli? Or 
do

you mean the hostsystem with installed ovirt engine? thx


Not sure I follow.

The engine runs on some machine, let's call it "the engine machine".
If it's a self-hosted-engine, it's running inside a VM managed by 
itself.
Otherwise it's running elsewhere (on some physical machine, or some 
other

VM).

A "Host", in ovirt terminology, is where VMs run.

Now please describe what you did, what you now try to do that doesn't
work, and what you can find in logs that might be related.

If you can't access the web admin ui, that's a completely different
problem than if you can't add a host to the engine.

Best,


Hi Didi,
as far i understand there are to ways to setup ovirt. One as self-hosted 
enginge for ha and with ovirt host in vm on storage and hosted engine 
where all runs on the same host. So i setup hosted engine on same 
machine and in installation process i setup iso_domain via nfs too. i 
have done nothing more yet. so as i can see and read from the manual i 
now have to setup the host, than network and than data domain and so on. 
now i setup the host and say new, put a name inside and the fqdn of the 
initial host of host engine like myserver.com. after that i saw the 
progress which says "installing.." i wait several minutes and after that 
i got network time out and cant enter the webgui. hope that helps

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Server dont work after Host setting

[Yedidyah Bar David]

On Mon, Dec 7, 2015 at 11:34 AM, Taste-Of-IT  wrote:
> Am 2015-12-07 10:21, schrieb Yedidyah Bar David:
>>
>> On Mon, Dec 7, 2015 at 11:05 AM, Taste-Of-IT 
>> wrote:
>>>
>>> Am 2015-12-07 08:06, schrieb Yedidyah Bar David:


 On Mon, Dec 7, 2015 at 12:38 AM, Taste-Of-IT 
 wrote:
>
>
> Hello,
> i am new with ovirt and i installed ovirt engine 3.6 on centos 7. After
> first login i create the host with fqdn of ovirt server but without
> powersavesettings. Firt i saw installing as status for host, but after
> a
> while nothing happend, I reboot the server. In engine.log i see "VMs
> initialization finished for Host", but i cant open the webgui. What can
> i
> do? Where can i look to find the error and what have i done wrong?



 If host-deploy managed to finish, you can see its log in [1]. Otherwise
 please try to (re)install the host.

 [1] /var/log/ovirt-engine/host-deploy/

 Best,
>>>
>>>
>>>
>>> Hi Didi,
>>> ok i will have a closer look into the log. Actuall the WebGUI doesnt
>>> load,
>>> services are up and running. How can i reinstall the host? Via cli? Or do
>>> you mean the hostsystem with installed ovirt engine? thx
>>
>>
>> Not sure I follow.
>>
>> The engine runs on some machine, let's call it "the engine machine".
>> If it's a self-hosted-engine, it's running inside a VM managed by itself.
>> Otherwise it's running elsewhere (on some physical machine, or some other
>> VM).
>>
>> A "Host", in ovirt terminology, is where VMs run.
>>
>> Now please describe what you did, what you now try to do that doesn't
>> work, and what you can find in logs that might be related.
>>
>> If you can't access the web admin ui, that's a completely different
>> problem than if you can't add a host to the engine.
>>
>> Best,
>
>
> Hi Didi,
> as far i understand there are to ways to setup ovirt. One as self-hosted
> enginge for ha and with ovirt host in vm on storage

That's called "self-hosted-engine"

> and hosted engine where
> all runs on the same host.

This is called all-in-one [1].

[1] http://www.ovirt.org/Feature/AllInOne

> So i setup hosted engine on same machine and in
> installation process i setup iso_domain via nfs too. i have done nothing
> more yet. so as i can see and read from the manual i now have to setup the
> host,

No. You are not supposed to setup the host from the web interface.
I didn't try that recently, but in the past there were issues similar
to what you wrote below. Please follow the instructions in that page.
Also please note that in 4.0, allinone will be dropped. Systems that
wish to have everything on a single host will need to use hosted-engine.
Also note that people reported locking issues with local nfs mounts, so
it seems like the safest bet for now is to use nested kvm - run a VM to
play the "Host" role, and another VM as an nfs server (or iscsi), and
then either a third VM for the engine, or hosted-engine (meaning, engine
runs inside a VM running inside the first VM).

> than network and than data domain and so on. now i setup the host and
> say new, put a name inside and the fqdn of the initial host of host engine
> like myserver.com. after that i saw the progress which says "installing.." i
> wait several minutes and after that i got network time out and cant enter
> the webgui. hope that helps

Good luck,
-- 
Didi
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Storage over allocation ratio value larger than 125% will pause vms

[Yaniv Dary]

Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109

Tel : +972 (9) 7692306
8272306
Email: yd...@redhat.com
IRC : ydary


On Mon, Dec 7, 2015 at 12:38 AM, Jan Bernard Wevers <
jan.bernard.wev...@group2000.com> wrote:

> I’m using ovirt 3.6 and an iscsi storage domain. Almost all vms are using
> thin provisioning with a virtual size of 40GB and a typical physical size
> of
> 8 GB.
> Now I’m facing the fact that ovirt is pausing my vms due to the following
> event message:
> (Example):  “VM vm_01_16_centos6 has been paused due to no Storage space
> error.”
>
> When I look at the iscsi storage domain the over allocation ratio value is
> about 127%, but of the 2799GB there is still more than 1500GB available.
> My questions:
> - Why ovirt is pausing the vms?
>

We have a minimal amount of 1G needed to do storage related actions.


> - Can I enlarge the over allocation ratio before ovirt is complaining about
> storage space?
>

In 3.6 you can change this threshold pre storage, but I would recommend
against this.


>
>
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Cinder docker installation failure

[Yaniv Dary]

I would contact their devs for help, configuring OSP is not something we
can really help with.
At least until we integrate with the Ansible deployment.


Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109

Tel : +972 (9) 7692306
8272306
Email: yd...@redhat.com
IRC : ydary


On Mon, Dec 7, 2015 at 6:53 AM, Bond, Darryl  wrote:

> Has anyone had any success installing the docker Cinder interface for
> oVirt3.6 on Centos7.1?
>
> Using the current Engine installation ends up with a non-functioning cinder
>
> a83ce47cef7ekollaglue/centos-rdo-cinder:kilo
> "/start.sh"  4 days ago  Restarting (127) 11 minutes
> ago ?
>
>
> The Kolla project changed the way it distributed it's docker instances to
> use Ansible to configure the image.
> oVirt has yet to implement a way of using the Ansible configuration and
> recommends using the Kolla documentation.
>
>
>
> I have been beating my head against the kolla 'so called' quick start
> guide https://github.com/openstack/kolla/blob/master/doc/quickstart.rst
>
>
> I haven't followed the guide to the letter, eg I want to use the Centos
> docker package which does seem to be the correct version, rather than build
> the very latest Docker as recommended.
>
> The error seems to indicate that the client has moved past the server
> version recommended.
>
>
> failed: [localhost] => {"changed": false, "failed": true}
> msg: Docker API Error: client is newer than server (client API version:
> 1.21, server API version: 1.20)
>
> FATAL: all hosts have already failed -- aborting
>
>
>
>
>
> I can't work out whether the build just broken or I have missed something.
> It's not obvious from the documentation exactly what I must do to get a
> usable image to test Ceph on oVirt.
>
>
> I think I need to just configure the container but it seems I have build a
> complete Openstack Kolla implementation from source and load it into my own
> docker registry and then configure it
>
>
> Regards
>
> Darryl
>
>
>
>
>
>
> 
>
> The contents of this electronic message and any attachments are intended
> only for the addressee and may contain legally privileged, personal,
> sensitive or confidential information. If you are not the intended
> addressee, and have received this email, any transmission, distribution,
> downloading, printing or photocopying of the contents of this message or
> attachments is strictly prohibited. Any legal privilege or confidentiality
> attached to this message and attachments is not waived, lost or destroyed
> by reason of delivery to any person other than intended addressee. If you
> have received this message and are not the intended addressee you should
> notify the sender by return email and destroy all copies of the message and
> any attachments. Unless expressly attributed, the views expressed in this
> email do not necessarily represent the views of the company.
> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] Storage over allocation ratio value larger than 125% will pause vms

[Jan Bernard Wevers]

Yaniv,

 

Thanks for your answers. Really appreciate this.

 

As most of the vm’s (70 vm’s of a total of 80) are not running, the risk of 
getting out of physical disk space is low. The vm’s are pre-installed from a 
template, installed with application software and will only be powered on when 
needed.

So most of the vm’s actually allocate no more than 5 GB of physical space (of a 
virtual size of 35GB). The actual used disk size of all vm’s is about 900GB, 
leaving 1900GB of free space of a total of 2800GB. The allocated disk space is 
around 3300GB, making an over allocation ratio of 125%. So in this special case 
ovirt will pause my vm’s if the ratio will exceed 125%, while still having 
plenty of physical disk space.

 

You mentioned that it is possible to change the value to a larger value, but I 
could not find how to do this?

 

Thanks,

Jan Bernard

 

 

From: Yaniv Dary [mailto:yd...@redhat.com] 
Sent: maandag 7 december 2015 12:53
To: Jan Bernard Wevers
Cc: users@ovirt.org
Subject: Re: [ovirt-users] Storage over allocation ratio value larger than 125% 
will pause vms

 

 




Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109
 
Tel : +972 (9) 7692306
8272306
Email: yd...@redhat.com
IRC : ydary

 

On Mon, Dec 7, 2015 at 12:38 AM, Jan Bernard Wevers 
 wrote:

I’m using ovirt 3.6 and an iscsi storage domain. Almost all vms are using
thin provisioning with a virtual size of 40GB and a typical physical size of
8 GB.
Now I’m facing the fact that ovirt is pausing my vms due to the following
event message:
(Example):  “VM vm_01_16_centos6 has been paused due to no Storage space
error.”

When I look at the iscsi storage domain the over allocation ratio value is
about 127%, but of the 2799GB there is still more than 1500GB available.
My questions:
- Why ovirt is pausing the vms?

 

We have a minimal amount of 1G needed to do storage related actions.

 

- Can I enlarge the over allocation ratio before ovirt is complaining about
storage space?

 

In 3.6 you can change this threshold pre storage, but I would recommend against 
this. 

 



___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

 



smime.p7s
Description: S/MIME cryptographic signature
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] patternfly missing during CentOS7.1 installs of oVirt v3.5 and v3.6

[Matthew Bohnsack]

Hello,

I am attempting to install oVirt v3.6 on CentOS.7.1 via:


# yum install
http://plain.resources.ovirt.org/pub/yum-repo/ovirt-release36.rpm
# yum -y install ovirt-engine

When I do this, I get an error about
patternfly1-1.3.0-1.el7.centos.noarch.rpm not existing.  Sure enough that
file is missing from the referenced repository:


# yum -y install ovirt-engine
...
patternfly1-1.3.0-1.el7.centos FAILED

http://copr-be.cloud.fedoraproject.org/results/patternfly/patternfly1/epel-7-x86_64/patternfly1-1.3.0-1.fc20/patternfly1-1.3.0-1.el7.centos.noarch.rpm:
[Errno 14] curl#18 - "transfer closed with 2165640 bytes remaining to read"
Trying other mirror.

Error downloading packages:
  patternfly1-1.3.0-1.el7.centos.noarch: [Errno 256] No more mirrors to try.


A very similar error occurs when attempting to install oVirt v3.5.

Any suggestions?

Thanks,

-Matthew
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] CentOS 7.1 and virt-v2v

[Shahar Havivi]

On 07.12.15 13:34, CLSA Mcmaster wrote:
> On Mon, Dec 7, 2015 at 1:26 PM, Shahar Havivi  wrote:
> 
> > On 07.12.15 13:15, CLSA Mcmaster wrote:
> > > On Mon, Dec 7, 2015 at 1:03 PM, Shahar Havivi 
> > wrote:
> > >
> > > > On 07.12.15 11:19, CLSA Mcmaster wrote:
> > > > > Greetings
> > > > >
> > > > > I am new to both CentOS and oVirt. I have been hoping to migrate some
> > > > > virtual machines from VMware to oVirt and I have hit a wall.
> > > > >
> > > > > CentOS 7.1 does not include the tool virt-v2v with the
> > libguestfs-tools
> > > > > package. I have enabled the CR repository and upgraded but no luck. I
> > > > have
> > > > > attempted to compile but the dependency whack-a-mole process wore me
> > down
> > > > > and I eventually hot another wall with supermin not being "new
> > enough". I
> > > > > tried to compile that and ran into more dependency issues.
> > > > Hi Sean,
> > > > For virt-v2v compilation issue you can ask at libgues...@redhat.com
> > > > mailing
> > > > list.
> > > > >
> > > > > Frankly, I am at the point of throwing in the towel but I'm hoping
> > > > someone
> > > > > can offer advise or insight on obtaining the tool through other
> > means. I
> > > > > would also be open to importing guests through another method. For
> > > > example,
> > > > > the oVirt interface has a utility to import OVA files. Is that VMware
> > > > > created OVA files? The dialogue has host and path. Is the path to be
> > on
> > > > the
> > > > > host or the engine? Can it be any path?
> > > > Upstream ovirt git://gerrit.ovirt.org/ovirt-engine have support for
> > > > importing
> > > > OVA files that was exported from vShpere 5.5 and 6.0 as well as
> > connecting
> > > > to
> > > > a running esxi listing and importing the VMs that are in down state.
> > > >
> > > > The OVA file must be accessed by the importing host with permissions
> > > > 36:36(NFS
> > > > mount will work as well).
> > > >
> > > > To access the import VMs feature simply go to the VMs tab and click on
> > the
> > > > import button there you will be able to select the import source
> > > > (VMware/OVA
> > > > etc).
> > > >
> > > > More information about virt-v2v integration with oVirt can be found in
> > its
> > > > feature page: http://www.ovirt.org/Features/virt-v2v_Integration
> > > >
> > > >  Shahar.
> > > > >
> > > > > Thank you in advance for any support offered.
> > > > >
> > > > > Sean.
> > > >
> > > > > ___
> > > > > Users mailing list
> > > > > Users@ovirt.org
> > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > >
> > > >
> > > Thank you. Shahar.
> > >
> > > I did get an OVA imported. Unfortunately, immediately upon doing so I got
> > > this error: "Unit mom-vdsm.service has failed".
> > Can you add the vdsm log, its in /var/log/vdsm/vdsm.log
> > >
> > > Sean.
> >
> > > ___
> > > Users mailing list
> > > Users@ovirt.org
> > > http://lists.ovirt.org/mailman/listinfo/users
> >
> >
> I shut down the host. I will restart it. But on the engine side in
> engine.log I see:
Ok,
try to see if you can update the mom* packages on the host and also what
version of vdsm and mom are you using?
vdsm log can be helpful.

  Shahar.
> 
> Caused by: org.postgresql.util.PSQLException: ERROR: integer out of range
>   Where: PL/pgSQL function fn_get_disk_commited_value_by_storage(uuid) line
> 20 at assignment
> PL/pgSQL function getstorage_domains_by_storagepoolid(uuid,uuid,boolean)
> line 3 at RETURN QUERY
> at
> org.postgresql.core.v3.QueryExecutorImpl.receiveErrorResponse(QueryExecutorImpl.java:2103)
> at
> org.postgresql.core.v3.QueryExecutorImpl.processResults(QueryExecutorImpl.java:1836)
> at
> org.postgresql.core.v3.QueryExecutorImpl.execute(QueryExecutorImpl.java:257)
> at
> org.postgresql.jdbc2.AbstractJdbc2Statement.execute(AbstractJdbc2Statement.java:512)
> at
> org.postgresql.jdbc2.AbstractJdbc2Statement.executeWithFlags(AbstractJdbc2Statement.java:388)
> at
> org.postgresql.jdbc2.AbstractJdbc2Statement.executeQuery(AbstractJdbc2Statement.java:273)
> at
> org.jboss.jca.adapters.jdbc.CachedPreparedStatement.executeQuery(CachedPreparedStatement.java:111)
> at
> org.jboss.jca.adapters.jdbc.WrappedPreparedStatement.executeQuery(WrappedPreparedStatement.java:462)
> at
> org.springframework.jdbc.core.JdbcTemplate$1.doInPreparedStatement(JdbcTemplate.java:644)
> [spring-jdbc.jar:3.1.1.RELEASE]
> at
> org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:587)
> [spring-jdbc.jar:3.1.1.RELEASE]
> ... 153 more

> ___
> Users mailing list
> Users@ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

[ovirt-users] hot plug memory in el7

[Nathanaël Blanchet]

Hi all,

I may miss something but according to 
http://www.ovirt.org/Features/Hot_Plug_Memory, ovirt 3.6 was supposed to 
support the hot plug memory feature. Nothing happens in reality when 
increasing memory on a running vm with centos7.
I found this : 
http://lists.ovirt.orgpipermail/kimchi-devel/2015-June/010714.html, and 
it seems that el7.1 can't support the feature because of its libvirt 
version (1.2.8) while the required one is 1.2.14.

I didn't test, but I guess F22 supports it.
Is there any chance that el7.2 would support it with a backported libvirtd?
Or will a dedicated libvirt rhev package be released so as the 
downstream to support it (like qemu-kvm for live snapshot some time ago)?
Documentation and limitation of the libvirt version for hot plug memory 
are difficult to find in the ovirt wiki and more generally on the web.

Maybe the feature has been postponed to a 3.6.z release?
Thank you for your help
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

Re: [ovirt-users] CentOS 7.1 and virt-v2v

[CLSA Mcmaster]

On Mon, Dec 7, 2015 at 1:37 PM, Shahar Havivi  wrote:

> On 07.12.15 13:34, CLSA Mcmaster wrote:
> > On Mon, Dec 7, 2015 at 1:26 PM, Shahar Havivi 
> wrote:
> >
> > > On 07.12.15 13:15, CLSA Mcmaster wrote:
> > > > On Mon, Dec 7, 2015 at 1:03 PM, Shahar Havivi 
> > > wrote:
> > > >
> > > > > On 07.12.15 11:19, CLSA Mcmaster wrote:
> > > > > > Greetings
> > > > > >
> > > > > > I am new to both CentOS and oVirt. I have been hoping to migrate
> some
> > > > > > virtual machines from VMware to oVirt and I have hit a wall.
> > > > > >
> > > > > > CentOS 7.1 does not include the tool virt-v2v with the
> > > libguestfs-tools
> > > > > > package. I have enabled the CR repository and upgraded but no
> luck. I
> > > > > have
> > > > > > attempted to compile but the dependency whack-a-mole process
> wore me
> > > down
> > > > > > and I eventually hot another wall with supermin not being "new
> > > enough". I
> > > > > > tried to compile that and ran into more dependency issues.
> > > > > Hi Sean,
> > > > > For virt-v2v compilation issue you can ask at
> libgues...@redhat.com
> > > > > mailing
> > > > > list.
> > > > > >
> > > > > > Frankly, I am at the point of throwing in the towel but I'm
> hoping
> > > > > someone
> > > > > > can offer advise or insight on obtaining the tool through other
> > > means. I
> > > > > > would also be open to importing guests through another method.
> For
> > > > > example,
> > > > > > the oVirt interface has a utility to import OVA files. Is that
> VMware
> > > > > > created OVA files? The dialogue has host and path. Is the path
> to be
> > > on
> > > > > the
> > > > > > host or the engine? Can it be any path?
> > > > > Upstream ovirt git://gerrit.ovirt.org/ovirt-engine have support
> for
> > > > > importing
> > > > > OVA files that was exported from vShpere 5.5 and 6.0 as well as
> > > connecting
> > > > > to
> > > > > a running esxi listing and importing the VMs that are in down
> state.
> > > > >
> > > > > The OVA file must be accessed by the importing host with
> permissions
> > > > > 36:36(NFS
> > > > > mount will work as well).
> > > > >
> > > > > To access the import VMs feature simply go to the VMs tab and
> click on
> > > the
> > > > > import button there you will be able to select the import source
> > > > > (VMware/OVA
> > > > > etc).
> > > > >
> > > > > More information about virt-v2v integration with oVirt can be
> found in
> > > its
> > > > > feature page: http://www.ovirt.org/Features/virt-v2v_Integration
> > > > >
> > > > >  Shahar.
> > > > > >
> > > > > > Thank you in advance for any support offered.
> > > > > >
> > > > > > Sean.
> > > > >
> > > > > > ___
> > > > > > Users mailing list
> > > > > > Users@ovirt.org
> > > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > > >
> > > > >
> > > > Thank you. Shahar.
> > > >
> > > > I did get an OVA imported. Unfortunately, immediately upon doing so
> I got
> > > > this error: "Unit mom-vdsm.service has failed".
> > > Can you add the vdsm log, its in /var/log/vdsm/vdsm.log
> > > >
> > > > Sean.
> > >
> > > > ___
> > > > Users mailing list
> > > > Users@ovirt.org
> > > > http://lists.ovirt.org/mailman/listinfo/users
> > >
> > >
> > I shut down the host. I will restart it. But on the engine side in
> > engine.log I see:
> Ok,
> try to see if you can update the mom* packages on the host and also what
> version of vdsm and mom are you using?
> vdsm log can be helpful.
>
>   Shahar.
> >
> > Caused by: org.postgresql.util.PSQLException: ERROR: integer out of range
> >   Where: PL/pgSQL function fn_get_disk_commited_value_by_storage(uuid)
> line
> > 20 at assignment
> > PL/pgSQL function getstorage_domains_by_storagepoolid(uuid,uuid,boolean)
> > line 3 at RETURN QUERY
> > at
> >
> org.postgresql.core.v3.QueryExecutorImpl.receiveErrorResponse(QueryExecutorImpl.java:2103)
> > at
> >
> org.postgresql.core.v3.QueryExecutorImpl.processResults(QueryExecutorImpl.java:1836)
> > at
> >
> org.postgresql.core.v3.QueryExecutorImpl.execute(QueryExecutorImpl.java:257)
> > at
> >
> org.postgresql.jdbc2.AbstractJdbc2Statement.execute(AbstractJdbc2Statement.java:512)
> > at
> >
> org.postgresql.jdbc2.AbstractJdbc2Statement.executeWithFlags(AbstractJdbc2Statement.java:388)
> > at
> >
> org.postgresql.jdbc2.AbstractJdbc2Statement.executeQuery(AbstractJdbc2Statement.java:273)
> > at
> >
> org.jboss.jca.adapters.jdbc.CachedPreparedStatement.executeQuery(CachedPreparedStatement.java:111)
> > at
> >
> org.jboss.jca.adapters.jdbc.WrappedPreparedStatement.executeQuery(WrappedPreparedStatement.java:462)
> > at
> >
> org.springframework.jdbc.core.JdbcTemplate$1.doInPreparedStatement(JdbcTemplate.java:644)
> > [spring-jdbc.jar:3.1.1.RELEASE]
> > at
> > org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:587)
> > [spring-jdbc.jar:3.1.1.RELEASE]
> > 

Re: [ovirt-users] Cinder docker installation failure

[Bond, Darryl]

Yaniv,
I don't want to build OSP, I just want a working cinder container to test oVirt 
Ceph integration.

I am trying to follow the oVirt 3.6 release notes regarding the Cinder support:
>>'Experimental Docker Integration
>>oVirt Engine setup now provides experimental Cinder and Glance automated 
>>deployment using Docker

>>Cinder and Glance images are from kollaglue project. 
>>https://github.com/openstack/kolla kollaglue is 'the official' effort from 
>>openstack project to provide production-ready containers and deployment tools 
>>for operating
>>OpenStack clouds. The kollaglue Docker images are built by the Kolla project 
>>maintainers. On oVirt side we have an optional plugin for oVirt engine-setup 
>>to pull and deploy their ready to use containers (glance and cinder
>>only) and automatically adding them into your oVirt engine isntance.

>>Recently the cinder container setup for oVirt got broken cause they 
>>introduced the use of Ansible's playbooks to customize and complete the 
>>container setup and unfortunately we are still not ready for that. You should 
>>be
>>able to manually setup cinder with that containers following this guides: 
>>https://github.com/openstack/kolla/blob/master/doc/ansible-deployment.rsthttps://github.com/openstack/kolla/blob/master/doc/cinder-
>>​guide.rst

>>Glance container setup and its oVirt integration are still working.​

'

The ansible-deployment link is broken and the only thing that looks similar is 
their quickstart guide.

I am simply asking if anyone has had any success manually setting it up.

Regards

Darryl







From: Yaniv Dary 
Sent: Monday, 7 December 2015 9:55 PM
To: Bond, Darryl
Cc: users@ovirt.org
Subject: Re: [ovirt-users] Cinder docker installation failure

I would contact their devs for help, configuring OSP is not something we can 
really help with.
At least until we integrate with the Ansible deployment.



Yaniv Dary
Technical Product Manager
Red Hat Israel Ltd.
34 Jerusalem Road
Building A, 4th floor
Ra'anana, Israel 4350109

Tel : +972 (9) 7692306
8272306
Email: yd...@redhat.com
IRC : ydary

On Mon, Dec 7, 2015 at 6:53 AM, Bond, Darryl 
> wrote:
Has anyone had any success installing the docker Cinder interface for oVirt3.6 
on Centos7.1?

Using the current Engine installation ends up with a non-functioning cinder

a83ce47cef7ekollaglue/centos-rdo-cinder:kilo"/start.sh" 
 4 days ago  Restarting (127) 11 minutes ago ?


The Kolla project changed the way it distributed it's docker instances to use 
Ansible to configure the image.
oVirt has yet to implement a way of using the Ansible configuration and 
recommends using the Kolla documentation.



I have been beating my head against the kolla 'so called' quick start guide 
https://github.com/openstack/kolla/blob/master/doc/quickstart.rst


I haven't followed the guide to the letter, eg I want to use the Centos docker 
package which does seem to be the correct version, rather than build the very 
latest Docker as recommended.

The error seems to indicate that the client has moved past the server version 
recommended.


failed: [localhost] => {"changed": false, "failed": true}
msg: Docker API Error: client is newer than server (client API version: 1.21, 
server API version: 1.20)

FATAL: all hosts have already failed -- aborting





I can't work out whether the build just broken or I have missed something. It's 
not obvious from the documentation exactly what I must do to get a usable image 
to test Ceph on oVirt.


I think I need to just configure the container but it seems I have build a 
complete Openstack Kolla implementation from source and load it into my own 
docker registry and then configure it


Regards

Darryl








The contents of this electronic message and any attachments are intended only 
for the addressee and may contain legally privileged, personal, sensitive or 
confidential information. If you are not the intended addressee, and have 
received this email, any transmission, distribution, downloading, printing or 
photocopying of the contents of this message or attachments is strictly 
prohibited. Any legal privilege or confidentiality attached to this message and 
attachments is not waived, lost or destroyed by reason of delivery to any 
person other than intended addressee. If you have received this message and are 
not the intended addressee you should notify the sender by return email and 
destroy all copies of the message and any attachments. Unless expressly 
attributed, the views expressed in this email do not necessarily represent the 
views of the company.
___
Users mailing list
Users@ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

___
Users